A stack of fresh ID badges and a lanyard clip with nowhere to hook it is the moment the best badge hole punch earns its drawer space. The best badge hole punch cuts a clean slot in a PVC card, lines up the same way on the next card, and keeps the scraps off the desk. We compared handheld slot punches for ID cards, luggage tags and name tags, using only what each listing publishes.
OfficeKitHQ earns a commission when you buy through links on this page, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Affiliate disclosure.
Quick picks
Best Overall MROCO One Slot Badge Punch: 12 sheets, 15 x 3 mm slot, spring mechanism and 1-year free replacement Check price on Amazon
Best Scrap Tray IMLIKE Badge Slot Hole Punch: Built-in scrap tray, 15 x 4 mm slot, one-hand lever handles Check price on Amazon
Best Adjustable Depth Zofly Heavy-Duty Slot Punch: Adjustable feed depth to 24 mm, 10 sheets, scrap-holding cover Check price on Amazon
Best 3-in-1 Bodno 3-in-1 Badge Slot Punch: Round punch, slot punch and corner rounder in one steel tool Check price on Amazon
Lowest Weight SAMYO ID Card Slot Hole Punch: 0.2 lb zinc alloy punch with a 15 x 3 mm slot Check price on Amazon
Our desk picks
| # | Product | Office Score | Buy |
|---|---|---|---|
| 1 | MROCO One Slot Badge Punch | 9.7/10 | Buy on Amazon |
| 2 | IMLIKE Badge Slot Hole Punch | 9.6/10 | Buy on Amazon |
| 3 | Zofly Heavy-Duty Slot Punch | 9.6/10 | Buy on Amazon |
| 4 | Bodno 3-in-1 Badge Slot Punch | 9.6/10 | Buy on Amazon |
| 5 | SAMYO ID Card Slot Hole Punch | 9.5/10 | Buy on Amazon |

MROCO One Slot Badge Punch
A heavy-duty all-metal slot punch with a 15 x 3 mm hole, a spring mechanism and a scrap exit, plus free replacement for quality issues within 1 year.
Pros
- Punches up to 12 sheets of thin paper or standard PVC cards
- Spring mechanism with a scrap exit, so no manual scrap cleanup
- Visible knife edge for card alignment before punching
- Free replacement for quality issues within 1 year
Cons
- Requires moderate hand strength
- Cards must be under 1 mm thick
- No sheet count stated for cardstock
Detailed Review
MROCO lists this punch as a heavy-duty chrome-finished metal slot punch with a 15 x 3 mm hole, a spring mechanism and a scrap exit. It handles up to 12 sheets of thin paper or standard PVC cards, works on cards under 1 mm thick, and offers free replacement for quality issues within 1 year. The title promises no burrs, but the bullets admit that some slight burrs may occur depending on material thickness and type, so the bullets, not the headline, describe the finish.
Who it's for: an office that punches ID badges in batches and wants the clearest capacity and warranty here. Who should skip it: anyone who needs a wider slot or a punch that works without moderate hand strength.
Its Office Score of 9.7/10 comes from performance 30/35, build 21/25, value 21/25, safety not scored (non-powered gear) and warranty 3/5: 75 of 90 points, placed on our 9.2 to 9.8 scale.
Key Specifications
| Hole size | 3 x 15 mm (19/32 x 1/8 in) |
|---|---|
| Sheets | Up to 12 sheets of thin paper |
| Size | 5.4 x 3.1 x 1 in |
| Warranty | Free replacement within 1 year |
Figures as published on the retailer listing, collected 11 November 2026. Performance figures are manufacturer rated.
Safety and Warranty
What this listing states. This product does not plug in or run on a battery, so safety is not part of its score. Free replacement for quality issues within 1 year. It does not say everything a buyer needs, such as who pays return shipping, so warranty scores 3 of 5. See How We Pick.
Shredder and printer safety. Keep hair, ties, jewelry, children and pets away from the feed slot, use the safety lock, unplug when not in use, and give printers and adapters room to vent.
This is general buying information, not professional advice. Follow each product manual and local rules, and see our Safety Disclaimer.

IMLIKE Badge Slot Hole Punch
A heavy-duty all-metal slot punch with a 19/32 x 5/32 in slot, a built-in scrap tray and one-hand lever handles for PVC cards and hard cardstock.
Pros
- Clean 19/32 x 5/32 in slot with no burrs or ragged edges
- Built-in metal scrap tray under the cutter
- Contoured lever handles, so one hand is enough
- Slot fits standard badge clips, lanyard hooks and retractable reels
Cons
- Not for thin paper, fabric, tape or laminating pouches
- No sheet count stated
- No warranty term is stated
- Cards and cardstock must be no more than 1 mm thick
Detailed Review
IMLIKE lists this punch as a heavy-duty handheld slot punch with a solid metal body and a sharp zinc-alloy cutter, cutting a 19/32 x 5/32 in slot in PVC ID cards, bank cards, membership cards and hard cardstock up to 1 mm thick. The built-in metal catch tray collects every offcut, and the contoured lever handles need only one hand. The listing is clear about its limits: thin paper, fabric, tape and laminating pouches jam the cutter.
Who it's for: a desk that punches PVC badges and wants a tidy tray and a one-hand squeeze. Who should skip it: anyone who punches thin paper or laminating pouches.
Its Office Score of 9.6/10 comes from performance 30/35, build 21/25, value 21/25, safety not scored (non-powered gear) and warranty 0/5: 72 of 90 points, placed on our 9.2 to 9.8 scale.
Key Specifications
| Hole size | 19/32 x 5/32 in (15 x 4 mm) |
|---|---|
| Card thickness | Up to 1 mm |
| Scrap tray | Built-in metal catch tray |
| Size | 5.35 x 0.78 x 3.14 in |
Figures as published on the retailer listing, collected 11 November 2026. Performance figures are manufacturer rated.
Safety and Warranty
What this listing states. This product does not plug in or run on a battery, so safety is not part of its score. No warranty term, so warranty scores zero. See How We Pick.
Shredder and printer safety. Keep hair, ties, jewelry, children and pets away from the feed slot, use the safety lock, unplug when not in use, and give printers and adapters room to vent.
This is general buying information, not professional advice. Follow each product manual and local rules, and see our Safety Disclaimer.

Zofly Heavy-Duty Slot Punch
An all-metal handheld slot punch with a 15 x 4 mm hole, adjustable feed depth to 24 mm and a scrap-holding cover for paper, PVC cards and tags.
Pros
- Adjustable feed depth to 0.95 in (24 mm) with a position limiting baffle
- Punches up to 10 sheets of paper at a time
- Lever structure with a U-shaped metal cutter head
- Auto reset cover holds punched scraps for easy cleaning
Cons
- A jammed sheet leaves the handles loose until pulled apart
- Other cards must be punched one sheet at a time
- No warranty term is stated
Detailed Review
Zofly lists this punch as a heavy-duty all-metal slot punch with a 0.59 x 0.16 in hole, an adjustable feed depth to 0.95 in, and a lever structure with a U-shaped metal cutter head. It punches up to 10 sheets of paper at a time, and the auto reset stainless steel cover holds the punched scraps. The listing disagrees with itself on size: the product dimensions say 5.8 x 3.3 x 1.1 in, while the size field says 5.8 x 3.4 x 1.1 in.
Who it's for: a desk that punches paper badges and tags and wants an adjustable feed depth. Who should skip it: anyone who wants a stated warranty term or a punch without the loose-handle jam quirk.
Its Office Score of 9.6/10 comes from performance 29/35, build 21/25, value 20/25, safety not scored (non-powered gear) and warranty 0/5: 70 of 90 points, placed on our 9.2 to 9.8 scale.
Key Specifications
| Hole size | 0.59 x 0.16 in (15 x 4 mm) |
|---|---|
| Sheets | Up to 10 sheets of paper |
| Feed depth | Adjustable to 0.95 in (24 mm) |
| Size | 5.8 x 3.3 x 1.1 in |
Figures as published on the retailer listing, collected 11 November 2026. Performance figures are manufacturer rated.
Safety and Warranty
What this listing states. This product does not plug in or run on a battery, so safety is not part of its score. No warranty term, so warranty scores zero. See How We Pick.
Shredder and printer safety. Keep hair, ties, jewelry, children and pets away from the feed slot, use the safety lock, unplug when not in use, and give printers and adapters room to vent.
This is general buying information, not professional advice. Follow each product manual and local rules, and see our Safety Disclaimer.

Bodno 3-in-1 Badge Slot Punch
A steel 3-in-1 punch with a round hole punch, a slot punch and a corner rounder for PVC cards, laminated cards and cardstock.
Pros
- Three tools in one: round punch, slot punch and corner rounder
- Works with PVC, laminated and cardstock used in ID card printers
- Durable alloy punch heads for long-lasting performance
- Round or slot punch both attach clips, lanyards and badge reels
Cons
- No slot size stated
- No sheet count stated
- Heaviest punch here
- No warranty term is stated
Detailed Review
Bodno lists this punch as a steel 3-in-1 tool with a round hole punch, a slot punch and a corner rounder for PVC cards and badge printers. It works with PVC, laminated and cardstock used in ID card printers, and either the round or the slot punch takes clips, lanyards and badge reels. The listing states no slot size and no sheet count, so the punch leaves the slot size and the sheet count unstated, and it is the heaviest punch here.
Who it's for: a badge station that wants one tool for round holes, slots and rounded corners. Who should skip it: anyone who needs a stated slot size or a light handheld punch.
Its Office Score of 9.6/10 comes from performance 28/35, build 20/25, value 20/25, safety not scored (non-powered gear) and warranty 0/5: 68 of 90 points, placed on our 9.2 to 9.8 scale.
Key Specifications
| Tools | Round punch, slot punch, corner rounder |
|---|---|
| Material | Steel, durable alloy punch heads |
| Works with | PVC, laminated, cardstock |
| Size | 4.52 x 3.26 x 6.02 in |
Figures as published on the retailer listing, collected 11 November 2026. Performance figures are manufacturer rated.
Safety and Warranty
What this listing states. This product does not plug in or run on a battery, so safety is not part of its score. No warranty term, so warranty scores zero. See How We Pick.
Shredder and printer safety. Keep hair, ties, jewelry, children and pets away from the feed slot, use the safety lock, unplug when not in use, and give printers and adapters room to vent.
This is general buying information, not professional advice. Follow each product manual and local rules, and see our Safety Disclaimer.

SAMYO ID Card Slot Hole Punch
A hand held zinc alloy slot punch with a chrome coating, a spring design and a visible knife edge, cutting a 15 x 3 mm slot for ID card lanyard holes.
Pros
- Lowest weight here at 0.2 pounds
- Durable zinc alloy with a chrome coating
- Spring design adds strength for clean punches
- Visible knife edge for checking card position before punching
Cons
- No sheet count stated
- No card thickness limit stated
- No scrap tray or scrap exit stated
- No warranty term is stated
Detailed Review
SAMYO lists this punch as a heavy-duty hand held slot punch for ID card lanyard holes, in durable zinc alloy with a chrome coating. The spring design adds strength for clean punches, the visible knife edge shows the card position before punching, and the slot measures about 0.59 x 0.12 in. The listing is the thinnest here: no sheet count, no card thickness limit, no scrap handling and no warranty term.
Who it's for: a light punch for occasional ID card slots. Who should skip it: anyone who wants a stated sheet count, a scrap tray or a warranty term.
Its Office Score of 9.5/10 comes from performance 27/35, build 20/25, value 19/25, safety not scored (non-powered gear) and warranty 0/5: 66 of 90 points, placed on our 9.2 to 9.8 scale.
Key Specifications
| Hole size | 0.59 x 0.12 in (15 x 3 mm) |
|---|---|
| Material | Zinc alloy, chrome coating |
| Design | Spring design, visible knife edge |
| Size | 5.4 x 1.0 x 3.1 in |
Figures as published on the retailer listing, collected 11 November 2026. Performance figures are manufacturer rated.
Safety and Warranty
What this listing states. This product does not plug in or run on a battery, so safety is not part of its score. No warranty term, so warranty scores zero. See How We Pick.
Shredder and printer safety. Keep hair, ties, jewelry, children and pets away from the feed slot, use the safety lock, unplug when not in use, and give printers and adapters room to vent.
This is general buying information, not professional advice. Follow each product manual and local rules, and see our Safety Disclaimer.
As an Amazon Associate I earn from qualifying purchases.
More picks to compare
Winlion Badge Hole PunchCast iron punch with a soft-grip handle for ID cards, luggage tags and paper.Check on Amazon
Bodno Hand Held Slot PunchSlot punch with centering and slide guides for vertical and horizontal cards.Check on Amazon
Specialist ID Stapler Slot PunchDesktop stapler-style punch with adjustable guides and a non-skid base.Check on Amazon
Specs compared
| Badge hole punch | Office Score | Hole size | Sheets | Card thickness | Scrap handling | Warranty | Amazon |
|---|---|---|---|---|---|---|---|
| MROCO One Slot Badge Punch | 9.7/10 | 15 x 3 mm | Up to 12 sheets | PVC cards under 1 mm | Scrap exit | Free replacement within 1 year | View on Amazon |
| IMLIKE Badge Slot Hole Punch | 9.6/10 | 15 x 4 mm | Not stated | Up to 1 mm | Built-in scrap tray | Not stated | View on Amazon |
| Zofly Heavy-Duty Slot Punch | 9.6/10 | 15 x 4 mm | Up to 10 sheets | Not stated | Cover holds scraps | Not stated | View on Amazon |
| Bodno 3-in-1 Badge Slot Punch | 9.6/10 | Not stated | Not stated | Not stated | Not stated | Not stated | View on Amazon |
| SAMYO ID Card Slot Hole Punch | 9.5/10 | 15 x 3 mm | Not stated | Not stated | Not stated | Not stated | View on Amazon |
Specs reflect manufacturer claims on each product listing (as of 11 November 2026).
How to choose the best badge hole punch
Match the slot to the clip
Slot size decides what the badge hangs from. The IMLIKE and the Zofly cut a 15 x 4 mm slot, while the MROCO and the SAMYO cut a 15 x 3 mm slot. The IMLIKE listing says its slot fits standard badge clips, lanyard hooks and retractable reels, so the badge hangs straight and stays put. The Bodno 3-in-1 states no slot size, so a buyer who needs a stated slot should pick another punch. For paper rather than cards, see our best two hole punch roundup.
| Punch | Slot size | Sheets |
|---|---|---|
| MROCO One Slot Badge Punch | 15 x 3 mm | Up to 12 sheets |
| IMLIKE Badge Slot Hole Punch | 15 x 4 mm | Not stated |
| Zofly Heavy-Duty Slot Punch | 15 x 4 mm | Up to 10 sheets |
| SAMYO ID Card Slot Hole Punch | 15 x 3 mm | Not stated |
| Bodno 3-in-1 Badge Slot Punch | Not stated | Not stated |
Count the sheets and the card thickness
Capacity is stated on two punches only. The MROCO handles up to 12 sheets of thin paper or standard PVC cards, and the Zofly handles no more than 10 sheets of paper at a time, with other cards punched one sheet at a time. Thickness is stated on the same two plus the IMLIKE: PVC cards under 1 mm for the MROCO, and hard cardstock up to 1 mm for the IMLIKE. The IMLIKE also warns that thin paper, fabric, tape and laminating pouches jam the cutter, so keep pouches away from it; our best laminating pouches for ID cards roundup covers the pouch side. The Bodno 3-in-1 and the SAMYO state no sheet count and no thickness limit, so a buyer who punches in batches should lean toward the MROCO or the Zofly.
Scraps, jams and one-hand use
Scrap handling separates the tidy punches from the messy ones. The IMLIKE has a built-in metal catch tray under the cutter, the MROCO has a scrap exit so scraps need no manual cleanup, and the Zofly has an auto reset cover that holds the punched scraps. The MROCO spring mechanism adds strength for clean punches and reduces the risk of jams, while the Zofly warns that a stuck sheet leaves the handles loose until the two handles are pulled apart. The IMLIKE contoured lever handles need only one hand, and the MROCO notes that it requires moderate hand strength. For heavier stock, see our best metal hole punch roundup.
Read the warranty line, not the headline
Only the MROCO states a warranty term: free replacement for quality issues within 1 year. The rest state no warranty term, so the warranty column in the comparison is blank for them. Headlines deserve the same check: the MROCO title promises no burrs, but its bullets admit that some slight burrs may occur depending on material thickness and type. The listing that states its limits plainly, like the IMLIKE with its 1 mm limit and its list of materials to avoid, is the listing a buyer can plan around.
FAQ
What size slot does a badge hole punch cut?
The IMLIKE and the Zofly cut a 15 x 4 mm slot, and the MROCO and the SAMYO cut a 15 x 3 mm slot. The Bodno 3-in-1 states no slot size.
How many sheets can a badge hole punch cut at once?
The MROCO handles up to 12 sheets of thin paper, and the Zofly handles no more than 10 sheets of paper at a time. The IMLIKE, the Bodno 3-in-1 and the SAMYO state no sheet count.
Can a badge hole punch cut PVC ID cards?
Yes. All five listings name PVC ID cards, and the MROCO and the IMLIKE state cards up to 1 mm thick. The IMLIKE is not for thin paper, fabric, tape or laminating pouches, which jam the cutter.
What is the difference between a slot punch and a round hole punch?
The Bodno 3-in-1 carries both a round hole punch and a slot punch, plus a corner rounder. The IMLIKE listing says its slot fits standard badge clips, lanyard hooks and retractable reels, while the Bodno listing says either shape takes clips, lanyards and badge reels.
Do any of these badge hole punches include a warranty?
Only the MROCO states one: free replacement for quality issues within 1 year. The rest state no warranty term.
Score breakdown
The Office Score weighs performance (slot size, sheet capacity and card thickness), build (metal body, cutter and lever), value for the stated specs, safety and warranty. For a badge punch, safety means a guarded cutter and a stated safety certification; no listing states either, so no pick earns safety points. One listing states a warranty term: the MROCO offers free replacement for quality issues within 1 year. How we pick explains the weights.
| Product | Office Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| MROCO One Slot Badge Punch | 9.7 | 30 | 21 | 21 | n/a | 3 |
| IMLIKE Badge Slot Hole Punch | 9.6 | 30 | 21 | 21 | n/a | 0 |
| Zofly Heavy-Duty Slot Punch | 9.6 | 29 | 21 | 20 | n/a | 0 |
| Bodno 3-in-1 Badge Slot Punch | 9.6 | 28 | 20 | 20 | n/a | 0 |
| SAMYO ID Card Slot Hole Punch | 9.5 | 27 | 20 | 19 | n/a | 0 |
The scale opens at 9.2 and closes at 9.8; between those marks, weighted points translate linearly into the score you see. When an item is unpowered and its listing names no safety feature, we drop safety and score it out of 90 points.
More for your workspace
See every label makers and shredders guide and all office machines and storage guides. Also see our best single hole punch. Also see our best hole punch for binders. Also see our best label maker.
More picks: label makers and shredders, home office printers, desk organizers and whiteboards.





