Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›

Home office gear, compared spec by spec.

Amazon Black Friday Week deals
Bookshelves and File Cabinets

Best Brass File Drawer Label Holder (2026): 5 Picks Compared

Five metal label holder frames for file drawers, cabinets and shelves, compared by outer size, inner label size, pack count and finish.

Best Brass File Drawer Label Holder (2026): 5 Picks Compared

The best brass file drawer label holder is the frame that lets a drawer tell you what is inside before you pull it open, because a row of unlabelled drawers turns every filing job into a search. We compared metal label holder frames for file drawers, cabinets and shelves by outer size, inner label size, pack count, finish and screws, using only what each listing publishes. The frames differ most on size and label fit, so the right pick depends on the drawer front and the card it must hold.

OfficeKitHQ earns a commission when you buy through links on this page, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Affiliate disclosure.

Quick picks

  • Adiyer 32 Pack
    Best Overall Adiyer 32 Pack: 32 pack, 70 x 33mm frame, 61mm hole spacing stated Check price on Amazon
  • Kyuionty 30 Pack
    Best Gold Finish Kyuionty 30 Pack: 30 pack, inner label 47 x 21mm stated, screws included Check price on Amazon
  • Rierdge 30 Pack
    Best Bronze Finish Rierdge 30 Pack: 30 pack, inner label 58.4 x 19.3mm stated, iron with bronze plating Check price on Amazon
  • uxcell 124mm Frame
    Best Large Frame uxcell 124mm Frame: 124 x 70mm frame, 82 x 45mm label fit, 8 screws for 4 holders Check price on Amazon
  • ONLYKXY 20 Pack
    Best Small Frame ONLYKXY 20 Pack: 60 x 17mm frame, 20 pack, iron with gold finish Check price on Amazon

Our desk picks

Adiyer 32 Pack

Adiyer 32 Pack

Adiyer9.6/10 Office Score
i
The Office Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 32 pack of antique copper label holders at 70 x 33mm, with a stated mounting hole center distance for file drawers, shelves and bookcases.

Pros

  • Largest pack here at 32 holders
  • Overall size of 70 x 33mm with a mounting hole center distance of 61mm stated
  • Iron frame with an antique copper finish
  • Stated for file drawers, shelves and bookcases

Cons

  • Inner label size is not stated, so card fit cannot be checked
  • Screws are not stated as included in the pack
  • No warranty term stated in the listing
  • No corrosion or plating claim stated beyond the antique copper finish
Detailed Review

The Adiyer listing states 32 iron label holders at an overall size of 70 x 33mm, or 2.75 inch by 1.3 inch, with a mounting hole center distance of 61mm, or 2.4 inch. The holders are stated for file drawers, shelves and bookcases, and the pack includes 32 holders. No inner label size, screws or warranty term are stated, so card fit and mounting parts cannot be checked from this listing alone.

Who it is for: owners labelling a full run of file drawers who want the largest pack here with a stated hole spacing. Who should skip it: anyone who needs a stated inner label size or screws in the box.

Its Office Score of 9.6/10 comes from performance 29/35, build 21/25, value 22/25, safety not scored (non-powered gear) and warranty 0/5: 72 of 90 points, placed on our 9.2 to 9.8 scale.

Key Specifications
Overall size70 x 33mm / 2.75" x 1.3"
Mounting hole distance61mm / 2.4"
Pack count32
Material and finishIron, antique copper

Figures as published on the retailer listing, collected 2 November 2026. Performance figures are manufacturer rated.

Safety and Warranty

What this listing states. This product does not plug in or run on a battery, so safety is not part of its score. No warranty term, so warranty scores zero. See How We Pick.

Anchor it. Anchor tall bookshelves and file cabinets to the wall with the supplied hardware or an anti-tip kit, load the lowest shelves and drawers first, and open one drawer at a time.

This is general buying information, not professional advice. Follow each product manual and local rules, and see our Safety Disclaimer.

Kyuionty 30 Pack

Kyuionty 30 Pack

Kyuionty9.6/10 Office Score
i
The Office Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 30 pack of gold label holders at 62 x 33mm, with a stated inner label size and screws included for drawers and file cabinets.

Pros

  • Inner label size stated at 47 x 21mm
  • Screws included in the 30 pack
  • Outer size stated in both mm and inches
  • Stated for drawers, file cabinets, cupboards and shelves

Cons

  • Title rounds the outer size to 2.4 inch while the bullets give 2.44 inch
  • No warranty term stated in the listing
  • Inner label of 47 x 21mm is smaller than the Rierdge and uxcell label fits here
  • Material is stated only as a metal frame, not as iron specifically
Detailed Review

The Kyuionty listing states 30 gold metal label holders with an outer size of 62 x 33mm, or 2.44 x 1.3 inch, and an inner size of 47 x 21mm, or 1.85 x 0.83 inch, with screws included. Installation is described as tightening the mounting screws on both sides. The title rounds the outer size to 2.4 inch by 1.3 inch, against the 2.44 inch figure in the bullets, so use the bullet figure for a tight fit.

Who it is for: owners who want a gold frame with a stated inner label size and screws in the box. Who should skip it: anyone who needs a larger label window or a stated warranty term.

Its Office Score of 9.6/10 comes from performance 29/35, build 21/25, value 21/25, safety not scored (non-powered gear) and warranty 0/5: 71 of 90 points, placed on our 9.2 to 9.8 scale.

Key Specifications
Outer size62 x 33mm / 2.44 x 1.3 inch
Inner label size47 x 21mm / 1.85 x 0.83 inch
Pack count30
FinishGold

Figures as published on the retailer listing, collected 2 November 2026. Performance figures are manufacturer rated.

Safety and Warranty

What this listing states. This product does not plug in or run on a battery, so safety is not part of its score. No warranty term, so warranty scores zero. See How We Pick.

Anchor it. Anchor tall bookshelves and file cabinets to the wall with the supplied hardware or an anti-tip kit, load the lowest shelves and drawers first, and open one drawer at a time.

This is general buying information, not professional advice. Follow each product manual and local rules, and see our Safety Disclaimer.

Rierdge 30 Pack

Rierdge 30 Pack

Rierdge9.6/10 Office Score
i
The Office Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 30 pack of bronze label holders at 82.9 x 32.6mm, with a stated inner label size and an iron frame with antique bronze plating.

Pros

  • Inner label size stated at 58.4 x 19.3mm
  • Iron frame with antique bronze plating, corrosion-resistant and anti-rust
  • Screws included in the 30 pack
  • Outer size stated in both mm and inches

Cons

  • Title rounds the outer size to 3.3 inch while the bullets give 3.27 inch
  • No warranty term stated in the listing
  • Inner label of 58.4 x 19.3mm is narrower than the uxcell label fit here
  • Color options listed include gold, silver and red copper, so check the bronze finish when ordering
Detailed Review

The Rierdge listing states 30 bronze label holders in iron with antique bronze plating that is corrosion-resistant and anti-rust, at an outer size of 82.9 x 32.6mm, or 3.27 x 1.28 inch, and an inner size of 58.4 x 19.3mm, or 2.3 x 0.76 inch, with screws. The title rounds the outer size to 3.3 inch, against the 3.27 inch figure in the bullets, so use the bullet figure for a tight fit. The listing also names gold, silver and red copper as color options, so the bronze finish must be checked when ordering.

Who it is for: owners who want a bronze frame with a stated inner label size, plating and screws in the box. Who should skip it: anyone who needs the largest label window here or a stated warranty term.

Its Office Score of 9.6/10 comes from performance 28/35, build 21/25, value 21/25, safety not scored (non-powered gear) and warranty 0/5: 70 of 90 points, placed on our 9.2 to 9.8 scale.

Key Specifications
Outer size82.9 x 32.6 mm / 3.27 x 1.28 inch
Inner label size58.4 x 19.3 mm / 2.3 x 0.76 inch
Pack count30
Material and finishIron, antique bronze plating

Figures as published on the retailer listing, collected 2 November 2026. Performance figures are manufacturer rated.

Safety and Warranty

What this listing states. This product does not plug in or run on a battery, so safety is not part of its score. No warranty term, so warranty scores zero. See How We Pick.

Anchor it. Anchor tall bookshelves and file cabinets to the wall with the supplied hardware or an anti-tip kit, load the lowest shelves and drawers first, and open one drawer at a time.

This is general buying information, not professional advice. Follow each product manual and local rules, and see our Safety Disclaimer.

uxcell 124mm Frame

uxcell 124mm Frame

uxcell9.5/10 Office Score
i
The Office Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 4 pack of bright bronze label holders at 124 x 70mm, with a stated label fit and 8 screws for drawers, cabinets and shelves.

Pros

  • Largest frame here at 124 x 70mm
  • Label fit stated at 82 x 45mm
  • 8 screws stated for the 4 holders
  • Iron with an electroplating finish, rust-proof and corrosion-proof

Cons

  • Smallest pack here at only 4 holders
  • No warranty term stated in the listing
  • Largest frame here, so it needs the widest flat drawer front
Detailed Review

The uxcell listing states 4 bright bronze label holders at an overall size of 124 x 70mm, or 4.88 inch by 2.76 inch, with a label fit of 82 x 45mm, or 3.23 inch by 1.77 inch, a mounting hole diameter of 3.5mm, or 0.14 inch, and 8 screws for the 4 holders. The frame is iron with an electroplating finish that is rust-proof and corrosion-proof. The spec table dimensions do not match the stated 124 x 70mm size, so trust the title and bullets here and ignore the table dimensions.

Who it is for: owners who need the largest frame and label window here for a wide drawer front. Who should skip it: anyone labelling many drawers, since this is only a 4 pack, or anyone who needs a stated warranty term.

Its Office Score of 9.5/10 comes from performance 28/35, build 20/25, value 19/25, safety not scored (non-powered gear) and warranty 0/5: 67 of 90 points, placed on our 9.2 to 9.8 scale.

Key Specifications
Overall size124 x 70mm / 4.88" x 2.76"
Label fit82 x 45mm / 3.23" x 1.77"
Mounting hole diameter3.5mm / 0.14"
Pack and screws4 holders, 8 screws

Figures as published on the retailer listing, collected 2 November 2026. Performance figures are manufacturer rated.

Safety and Warranty

What this listing states. This product does not plug in or run on a battery, so safety is not part of its score. No warranty term, so warranty scores zero. See How We Pick.

Anchor it. Anchor tall bookshelves and file cabinets to the wall with the supplied hardware or an anti-tip kit, load the lowest shelves and drawers first, and open one drawer at a time.

This is general buying information, not professional advice. Follow each product manual and local rules, and see our Safety Disclaimer.

ONLYKXY 20 Pack

ONLYKXY 20 Pack

ONLYKXY9.5/10 Office Score
i
The Office Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 20 pack of gold label holders at 60 x 17mm, in iron, for drawers, cabinets and small boxes.

Pros

  • Smallest frame here at 60 x 17mm
  • 20 pack in iron with a gold finish
  • Stated for drawers, cabinets, jewelry boxes and medicine cabinets
  • Retro frame shape for furniture and box fronts

Cons

  • Inner label size is not stated, so card fit cannot be checked
  • Screws are not stated as included in the pack
  • No warranty term stated in the listing
Detailed Review

The ONLYKXY listing states 20 gold label holders at 60mm by 17mm, in iron, for drawers, cabinets, jewelry boxes, medicine cabinets and other box fronts. The spec table dimensions of 5.0 inch by 3.0 inch by 0.5 inch do not match the stated 60 x 17mm size, so trust the title and bullets here and ignore the table dimensions. No inner label size, screws or warranty term are stated.

Who it is for: owners who need a small frame for narrow drawers and small box fronts. Who should skip it: anyone who needs a stated inner label size, screws in the box, or a larger label window.

Its Office Score of 9.5/10 comes from performance 26/35, build 19/25, value 19/25, safety not scored (non-powered gear) and warranty 0/5: 64 of 90 points, placed on our 9.2 to 9.8 scale.

Key Specifications
Size60 x 17mm
Pack count20
Material and finishIron, gold
Uses statedDrawers, cabinets, jewelry boxes, medicine cabinets

Figures as published on the retailer listing, collected 2 November 2026. Performance figures are manufacturer rated.

Safety and Warranty

What this listing states. This product does not plug in or run on a battery, so safety is not part of its score. No warranty term, so warranty scores zero. See How We Pick.

Anchor it. Anchor tall bookshelves and file cabinets to the wall with the supplied hardware or an anti-tip kit, load the lowest shelves and drawers first, and open one drawer at a time.

This is general buying information, not professional advice. Follow each product manual and local rules, and see our Safety Disclaimer.

As an Amazon Associate I earn from qualifying purchases.

Specs compared

Label holder Office Score Outer size Inner label size Pack count Finish Screws Amazon
Adiyer 32 Pack 9.6/10 70 x 33mm / 2.75″ x 1.3″ Not stated 32 Antique Copper Not stated View on Amazon
Kyuionty 30 Pack 9.6/10 62 x 33mm / 2.44 x 1.3 inch 47 x 21mm / 1.85 x 0.83 inch 30 Gold Included View on Amazon
Rierdge 30 Pack 9.6/10 82.9 x 32.6 mm / 3.27 x 1.28 inch 58.4 x 19.3 mm / 2.3 x 0.76 inch 30 Bronze Included View on Amazon
uxcell 124mm Frame 9.5/10 124 x 70mm / 4.88″ x 2.76″ 82 x 45mm / 3.23″ x 1.77″ 4 Bright Bronze 8 screws View on Amazon
ONLYKXY 20 Pack 9.5/10 60 x 17mm Not stated 20 Gold Not stated View on Amazon

All numbers are the manufacturer’s stated specs, not measured in an office, pulled on 2 November 2026.

How to choose the best brass file drawer label holder

Start with outer size and the drawer front

Outer size runs from 60 x 17mm on the ONLYKXY frame to 124 x 70mm on the uxcell frame, with the Kyuionty frame at 62 x 33mm, the Adiyer frame at 70 x 33mm and the Rierdge frame at 82.9 x 32.6mm in between. Measure the drawer front and the flat area the frame must sit on before ordering, since a frame that overhangs the front cannot be mounted cleanly. The uxcell frame suits a wide drawer front or a shelf edge, while the ONLYKXY frame suits a narrow drawer or a small box front.

Match the inner size to the card

Inner label size is stated for three picks: 47 x 21mm on the Kyuionty frame, 58.4 x 19.3mm on the Rierdge frame and 82 x 45mm on the uxcell frame. The Adiyer and ONLYKXY listings state no inner label size, so card fit cannot be checked from those listings alone. Cut or print the card to the stated inner size, not to the outer size, since the outer frame is always larger than the card window. See also label holders for binders for a different holder shape.

Count the pack against the drawers

Pack counts here are 32 on the Adiyer pack, 30 on the Kyuionty and Rierdge packs, 20 on the ONLYKXY pack and 4 on the uxcell pack. Count the drawers, cabinets and shelves to be labelled, plus a spare or two for a relabel, before choosing a pack size. A 4 pack suits a single cabinet, while a 32 pack suits a full run of file drawers. The uxcell pack is the only one that states screws per holder, at 8 screws for 4 holders.

Check screws and mounting

Screws are stated as included on the Kyuionty and Rierdge listings, and the uxcell listing states 8 screws in the pack. The Adiyer listing states a mounting hole center distance of 61mm, which helps check hole spacing against the drawer front, and the uxcell listing states a mounting hole diameter of 3.5mm. The Adiyer and ONLYKXY listings state no screws, so check the listing again before ordering if screws must be in the box. The Kyuionty listing describes tightening the mounting screws on both sides to complete installation.

Finish and material

No listing here states solid brass as the material. The listings state iron or metal with finishes: gold on the Kyuionty frame, bronze on the Rierdge frame, antique copper on the Adiyer frame, bright bronze on the uxcell frame and gold on the ONLYKXY frame. The Rierdge listing states iron with antique bronze plating that is corrosion-resistant and anti-rust, and the uxcell listing states iron with an electroplating finish that is rust-proof and corrosion-proof. Match the finish to the drawer hardware already in the room, and see magnetic label holders for file cabinets if a screw-free option is wanted.

FAQ

What size label holder fits a file drawer?

It depends on the drawer front and the card. Outer sizes here run from 60 x 17mm to 124 x 70mm, and inner label sizes, where stated, run from 47 x 21mm to 82 x 45mm. Measure the flat area on the drawer front, then check the inner size against the card.

Do these holders come with screws?

Screws are stated as included on the Kyuionty and Rierdge listings, and the uxcell listing states 8 screws for its 4 holders. The Adiyer and ONLYKXY listings state no screws, so do not assume screws are in those packs.

Which holder is the largest?

The uxcell frame, at 124 x 70mm overall with a label fit of 82 x 45mm. It is the only pick here with a stated label fit above 58.4 x 19.3mm, and it comes as a 4 pack rather than a large pack.

Which holder is the smallest?

The ONLYKXY frame, at 60 x 17mm. It comes as a 20 pack, and its listing states no inner label size and no screws, so both card fit and mounting parts need a closer check.

Are these holders solid brass?

No listing here states solid brass. The listings state iron or metal with gold, bronze, antique copper or bright bronze finishes, and the Rierdge and uxcell listings state plating or electroplating. Buy for the finish and the stated size, not for a solid brass claim the listings do not make.

Adiyer 32 Pack
Still deciding? Our top pickAdiyer 32 Pack
Check price on Amazon

Score breakdown

The Office Score weighs performance, build, value, safety and warranty. For a label holder, safety means a stated mounting or corrosion claim on the listing; no listing here states a safety certification, so safety scores zero for every pick. None of the listings states a warranty term. How we pick explains the weights.

Product Office Score Perf. /35 Build /25 Value /25 Safety /10 Warranty /5
Adiyer 32 Pack 9.6 29 21 22 n/a 0
Kyuionty 30 Pack 9.6 29 21 21 n/a 0
Rierdge 30 Pack 9.6 28 21 21 n/a 0
uxcell 124mm Frame 9.5 28 20 19 n/a 0
ONLYKXY 20 Pack 9.5 26 19 19 n/a 0

We fit point totals onto a 9.2 low and 9.8 high in a straight line. One item can outscore another only by earning more points. Electrical items and listings with stated safety features earn safety points. Other items are scored on the 90 points that are left.

More for your workspace

See every bookshelves and file cabinets guide and all office machines and storage guides.

More picks: plastic label holders for racks, label holder for shelf, desk organizers.