The best cable labels self laminating are the wrap-around labels that cover their own print with a clear layer, so the writing stays readable after the cable has been pulled, coiled and plugged in again. A label that fades or peels leaves the next person guessing which cable is which. This roundup compares the labels in this group by size, label count, heat resistance, certifications and warranty, using only what each listing publishes.
OfficeKitHQ earns a commission when you buy through links on this page, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Affiliate disclosure.
Quick picks
Best Overall MR-LABEL LA500070: 50 sheets, 1600 labels, 120°C resistance, 1-year warranty Check price on Amazon
Best Certified Brady M21-750-427: UL approved, CSA accepted, 0.75 in by 14 ft wrap Check price on Amazon
Best Pre-Sized Wrap Brady M21-18-427: UL 2238, 0.75 by 1 in wraps, self-extinguishing Check price on Amazon
Self-Laminating Labels MR-LABEL 800 Labels: 800 self-laminating labels, named in the title only Check price on Amazon
Our desk picks
| # | Product | Office Score | Buy |
|---|---|---|---|
| 1 | MR-LABEL LA500070 | 9.7/10 | Buy on Amazon |
| 2 | MR-LABEL LA500070 | 9.6/10 | Buy on Amazon |
| 3 | Brady M21-750-427 | 9.6/10 | Buy on Amazon |
| 4 | Brady M21-18-427 | 9.6/10 | Buy on Amazon |

MR-LABEL LA500070
A self-laminating wrap-around label set with 800 labels on 25 sheets for laser printers.
Pros
- 800 labels on 25 sheets, the largest count here
- Self-laminating over-laminate protects the printed legend
- Heat resistance to 120°C for laser printers
- 1 year manufacturer warranty stated
Cons
- Laser printer only, ink-jet printers not supported
- Spec table says Printable: No while the title says laser printer only
- Cable fit limited to 6.1 to 12.1 mm outside diameter
- White labels only, no color coding stated
Detailed Review
MR-LABEL lists 800 labels on 25 sheets, a label size of 57.2 by 25.4 mm, a print area of 25.4 by 19.1 mm, US Letter sheets at 215.9 by 279.4 mm, and a cable outside diameter range of 6.1 to 12.1 mm. The listing states heat resistance to 120°C (248°F), a white print area with a clear over-laminate, and a wire range covering Cat. 6, Cat. 6A and Cat. 5e network cables, 8 to 4 AWG, AC power cables and phone and tablet cables. One mismatch inside the listing: the spec table lists Printable as No while the title says Letter Sheet Laser Printer Only, and the spec table lists 4 packs against the 25-sheet size, so this review follows the title and bullets.
Who it's for: home offices and network racks with a laser printer and many cables to mark at both ends. Who should skip it: buyers without a laser printer, or buyers who want color-coded labels.
Its Office Score of 9.7/10 comes from performance 32/35, build 22/25, value 21/25, safety 7/10 and warranty 3/5: 85 of 100 points, placed on our 9.2 to 9.8 scale.
Key Specifications
| Count | 800 labels, 25 sheets |
|---|---|
| Label size | 57.2 by 25.4 mm |
| Print area | 25.4 by 19.1 mm |
| Cable fit | 6.1 to 12.1 mm outside diameter |
Figures as published on the retailer listing, collected 25 October 2026. Performance figures are manufacturer rated.
Safety and Warranty
What this listing states. Heat resistance to 120°C and waterproof construction stated, so safety scores 7 of 10. 1 year manufacturer warranty stated. It does not say everything a buyer needs, such as who pays return shipping, so warranty scores 3 of 5. See How We Pick.
Surge protector limits. Look for a UL 1449 listing, never plug one strip into another, keep the total load under the stated rating, and replace the unit after a major surge or when its indicator says protection has ended.
This is general buying information, not professional advice. Follow each product manual and local rules, and see our Safety Disclaimer.

MR-LABEL LA500070
A 50-sheet pack of 1600 self-laminating wrap around cable labels for laser printers, with heat resistance up to 120°C and a 1-year manufacturer warranty.
Pros
- 1600 labels on 50 sheets, the largest count here
- Label size 2.25 by 1 in with a 1 by 0.75 in print area
- Maximum 120°C heat resistance for laser printers
- Suits cables from 0.24 to 0.48 in outside diameter
Cons
- Laser printer only, not for label makers
- No certification is stated
- No diameter above 0.48 in is stated
- White only in this pack
Detailed Review
MR-LABEL lists the LA500070 as a 50-sheet pack of 1600 self-laminating wrap around cable labels for laser printers only. Each label measures 2.25 by 1 in with a 1 by 0.75 in print area, on US Letter sheets of 8.5 by 11 in. The labels suit cable outside diameters from 0.24 to 0.48 in and wire from 8 to 4 AWG, including Cat 6 and Cat 5e Ethernet cables, and resist heat up to a maximum of 120°C. A 1-year manufacturer warranty is stated.
Who it's for: someone labeling a large number of network cables with a laser printer. Who should skip it: anyone without a laser printer, since the listing states laser printer only.
Its Office Score of 9.6/10 comes from performance 32/35, build 21/25, value 21/25, safety 0/10 and warranty 4/5: 78 of 100 points, placed on our 9.2 to 9.8 scale.
Key Specifications
| Type | Self-laminating wrap around cable labels |
|---|---|
| Label size | 2.25 by 1 in |
| Count | 50 sheets (1600 labels) |
| Cable diameter | 0.24 to 0.48 in |
Figures as published on the retailer listing, collected 12 November 2026. Performance figures are manufacturer rated.
Safety and Warranty
What this listing states. No safety lock or safety listing is stated, so safety scores zero. 1 year manufacturer. It does not say everything a buyer needs, such as who pays return shipping, so warranty scores 4 of 5. See How We Pick.
Shredder and printer safety. Keep hair, ties, jewelry, children and pets away from the feed slot, use the safety lock, unplug when not in use, and give printers and adapters room to vent.
This is general buying information, not professional advice. Follow each product manual and local rules, and see our Safety Disclaimer.

Brady M21-750-427
A self-laminating vinyl wire wrap, 0.75 in wide and 14 ft long, with a white printable zone, UL approval and CSA acceptance.
Pros
- UL approved, CSA accepted and RoHS compliant
- B-427 vinyl resists abrasion, dirt, oils, solvents and water
- Permanent acrylic tape adheres to smooth, rough and powder-coated surfaces
- Fits M210, M210-LAB, M211, BMP21-PLUS and BMP21-LAB printers
Cons
- No warranty term is stated
- No label count is stated
- No heat figure is stated
- Made for Brady printers, not for laser printers
Detailed Review
Brady lists the M21-750-427 as a self-laminating wire wrap in B-427 vinyl, 0.75 in wide and 14 ft long, for control and electrical panels and datacom cable. The white printable zone prints black on white with a translucent overlaminating area, and the permanent acrylic tape adheres to smooth, rough, highly textured or powder-coated surfaces. The vinyl resists abrasion, dirt, oils, solvents, water and excess handling. The listing states UL approval, CSA acceptance and RoHS compliance.
Who it's for: someone labeling control panels and datacom cable with a Brady M210 or M211 printer. Who should skip it: anyone who needs a label count or a warranty term, since the listing states neither.
Its Office Score of 9.6/10 comes from performance 30/35, build 21/25, value 20/25, safety 8/10 and warranty 0/5: 79 of 100 points, placed on our 9.2 to 9.8 scale.
Key Specifications
| Type | Self-laminating wire wrap |
|---|---|
| Size | 0.75 in W, 14 ft L |
| Material | B-427 self-laminating vinyl |
| Printers | M210, M210-LAB, M211, BMP21-PLUS, BMP21-LAB |
Figures as published on the retailer listing, collected 12 November 2026. Performance figures are manufacturer rated.
Safety and Warranty
What this listing states. UL approved, CSA accepted, RoHS compliant to 2005/618/EC, so safety scores 8 of 10. No warranty term, so warranty scores zero. See How We Pick.
Shredder and printer safety. Keep hair, ties, jewelry, children and pets away from the feed slot, use the safety lock, unplug when not in use, and give printers and adapters room to vent.
This is general buying information, not professional advice. Follow each product manual and local rules, and see our Safety Disclaimer.

Brady M21-18-427
Pre-sized self-laminating vinyl wraps, 0.75 by 1 in, with a clear overlaminate, UL 2238 recognition and RoHS compliance.
Pros
- UL Recognized to UL 2238 and RoHS compliant
- Self-extinguishing and resistant to abrasion, solvents, oil and grease
- Clear non-printable overlaminate for protection
- Flexible for tightly-curved surfaces such as wires and cables
Cons
- No warranty term is stated
- No label count is stated
- Made for M210, M210-LAB and M211 printers only
Detailed Review
Brady lists the M21-18-427 as pre-sized self-laminating vinyl wraps, 0.75 by 1 in, for data, telecom, electrical, lab and wire work. The wraps are flexible for tightly-curved surfaces, self-extinguishing and resistant to abrasion, solvents, oil, grease, weather and extreme temperatures. A permanent acrylic adhesive works on smooth, rough, powder-coated and irregular surfaces, and a clear non-printable overlaminate adds protection. The listing states UL Recognition to UL 2238 and RoHS compliance.
A wrinkle: the spec table lists product dimensions of 2.0 by 3.0 by 4.0 in, while the title states the label at 0.75 by 1 in, so check which figure is the label before ordering. Who it's for: someone who wants pre-sized wraps with a stated UL recognition. Who should skip it: anyone who needs a label count or a warranty term, since the listing states neither.
Its Office Score of 9.6/10 comes from performance 29/35, build 21/25, value 20/25, safety 8/10 and warranty 0/5: 78 of 100 points, placed on our 9.2 to 9.8 scale.
Key Specifications
| Type | Pre-sized self-laminating vinyl wraps |
|---|---|
| Size | 0.75 by 1 in |
| Material | Self-laminating vinyl |
| Certifications | UL 2238, RoHS |
Figures as published on the retailer listing, collected 12 November 2026. Performance figures are manufacturer rated.
Safety and Warranty
What this listing states. UL Recognized to UL 2238, RoHS compliant to 2011/65/EU, so safety scores 8 of 10. No warranty term, so warranty scores zero. See How We Pick.
Shredder and printer safety. Keep hair, ties, jewelry, children and pets away from the feed slot, use the safety lock, unplug when not in use, and give printers and adapters room to vent.
This is general buying information, not professional advice. Follow each product manual and local rules, and see our Safety Disclaimer.
As an Amazon Associate I earn from qualifying purchases.
More picks to compare
Brady M21-1250-427 Wire Wrap1.25 in wide wrap, UL 2238, fits 10 to 4 gaugeCheck on Amazon
MR-LABEL 25-Sheet Blue Labels25 sheets, 800 blue labels, laser printer onlyCheck on Amazon
Specs compared
| Label | Office Score | Size | Labels | Certifications | Warranty | Amazon |
|---|---|---|---|---|---|---|
| MR-LABEL LA500070 | 9.6/10 | 2.25 by 1 in | 1600 | Not stated | 1 year manufacturer | View on Amazon |
| Brady M21-750-427 | 9.6/10 | 0.75 in by 14 ft | Not stated | UL, CSA, RoHS | Not stated | View on Amazon |
| Brady M21-18-427 | 9.6/10 | 0.75 by 1 in | Not stated | UL 2238, RoHS | Not stated | View on Amazon |
| MR-LABEL 800 Labels | 9.6/10 | Not stated | 800 | Not stated | Not stated |
All numbers are the manufacturer’s stated specs, not measured in an office, pulled on 12 November 2026. 1 of the 4 states a warranty term; Two of the 4 state a UL certification.
How to choose the best cable labels self laminating
Start with label size and wire range
Label size decides what the label wraps around. The Brady M21-750-427 is 0.75 in wide and 14 ft long, the Brady M21-18-427 is 0.75 by 1 in, and the MR-LABEL measures 2.25 by 1 in with a 1 by 0.75 in print area. The MR-LABEL suits cable outside diameters from 0.24 to 0.48 in and wire from 8 to 4 AWG, including Cat 6 and Cat 5e Ethernet cables. The MR-LABEL 800 Labels state no size, so measure the cable first.
Size, count and certifications at a glance
| Label | Size | Labels | Certifications |
|---|---|---|---|
| MR-LABEL LA500070 | 2.25 by 1 in | 1600 | Not stated |
| Brady M21-750-427 | 0.75 in by 14 ft | Not stated | UL, CSA, RoHS |
| Brady M21-18-427 | 0.75 by 1 in | Not stated | UL 2238, RoHS |
| MR-LABEL 800 Labels | Not stated | 800 | Not stated |
Figures as stated in each listing.
Check the laminate and the print area
The laminate is what keeps the print readable. The Brady M21-750-427 prints black on white with a translucent overlaminating area, and the Brady M21-18-427 adds a clear non-printable overlaminate. The MR-LABEL has a white print area and a clear over-laminate to protect the legend. The Brady M21-750-427 vinyl also resists dirt, oils, solvents, water and excess handling, while the Brady M21-18-427 resists weather and extreme temperatures. A wider print area takes more text, so check the print area against the longest label you need.
Heat and certifications
Heat and certifications decide where the label survives. The MR-LABEL resists heat up to a maximum of 120°C, and holds up in laser printers, which run hot while working, so the 120°C figure matters on every sheet. The Brady M21-18-427 is self-extinguishing and resistant to abrasion, solvents, oil, grease, weather and extreme temperatures, with UL Recognition to UL 2238 and RoHS compliance. The Brady M21-750-427 states UL approval, CSA acceptance and RoHS compliance. The MR-LABEL 800 Labels state no heat figure or certification.
Read the warranty line, not the headline
1 of the 4 listings states a warranty term. The MR-LABEL states a 1-year manufacturer warranty. The Brady wraps state no warranty term at all, and the MR-LABEL 800 Labels state no warranty term. A label is a simple part, but the adhesive and the laminate are the pieces that wear, so a term in writing is worth more than a vague promise.
Setup Notes
- Measure the cable first: the MR-LABEL suits cables from 0.24 to 0.48 in outside diameter.
- Check the printer: the Brady wraps list M210, M210-LAB and M211 printers, and the MR-LABEL sheets are for laser printers only.
- Check the heat: the MR-LABEL resists up to 120°C, so match the label to the heat it will see.
- Count the labels: the MR-LABEL pack holds 1600 labels on 50 sheets.
- Store the roll flat: the Brady 750 roll is 0.75 in wide and 14 ft long.
FAQ
What size are these self-laminating labels?
The Brady M21-750-427 is 0.75 in wide and 14 ft long, the Brady M21-18-427 is 0.75 by 1 in, and the MR-LABEL is 2.25 by 1 in. The MR-LABEL 800 Labels state no size.
How many labels come in a pack?
The MR-LABEL pack holds 1600 labels on 50 sheets, and the MR-LABEL 800 Labels state 800 labels. The Brady wraps state no label count.
What heat can they handle?
The MR-LABEL resists heat up to a maximum of 120°C. The Brady M21-18-427 is self-extinguishing and resistant to extreme temperatures, and the Brady M21-750-427 states no heat figure.
Which labels state a certification?
The Brady M21-750-427 states UL approval, CSA acceptance and RoHS compliance, and the Brady M21-18-427 states UL Recognition to UL 2238 and RoHS compliance. The MR-LABEL packs state no certification.
Which labels state a warranty term?
The MR-LABEL states a 1-year manufacturer warranty. The other listings state no warranty term.
Score breakdown
The Office Score weighs performance (label size, print area and wire range), build (materials and laminate), value for the stated specs, safety and warranty. For a self-laminating label, safety means stated certifications and heat resistance up to a stated figure; Two of the 4 state a UL certification and 1 states heat resistance up to 120°C. 1 of the 4 states a warranty term: the MR-LABEL at 1 year. How we pick explains the weights.
| Product | Office Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| MR-LABEL LA500070 | 9.6 | 32 | 21 | 21 | 0 | 4 |
| Brady M21-750-427 | 9.6 | 30 | 21 | 20 | 8 | 0 |
| Brady M21-18-427 | 9.6 | 29 | 21 | 20 | 8 | 0 |
We fit point totals onto a 9.2 low and 9.8 high in a straight line. One item can outscore another only by earning more points.
More for your workspace
See every surge protector and cable management guide and all connectivity guides. Also see our best cable label heat shrink. Also see our best cable labels with marker. Also see our best USB C label maker.
More picks: best cable labels for XLR, best cable labels reusable, best wrap around labels for cables.





