The best can holder for pegboard keeps spray cans off the desk and within reach, instead of rolling around in a drawer. A morning call starts with a dim webcam and a desk crowded with cans, cables and a hub. We compared pegboard holders by hole fit, stated load, material and finish.
OfficeKitHQ earns a commission when you buy through links on this page, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Affiliate disclosure.
Quick picks
Best Overall MADD TOOLS Paper Towel Holder: 13 x 4 in shelf holds spray cans, rated to 100 lb Check price on Amazon
Best Hook Set INCLY 10 Pack Pegboard Hooks: 10 pieces in 5 types, steel with vinyl coating, 10 to 20 lb loads Check price on Amazon
Best Coated Hooks KINOMI 6 Pc Drill Holder: Neoprene-coated steel hooks, 6 pieces, rated under 15 lb Check price on Amazon
Best Adjustable Acshio 10 Pack Towel Holder: Rod adjusts 11 to 14 in, 10 sets, fits 1/4, 3/16 and 1/8 in holes Check price on Amazon
Best Ring Holder Ripeng 4 Pc Ring Holder: 12 rings per hook, 4 pieces, fits 1/4, 3/16 and 1/8 in holes Check price on Amazon
Our desk picks
| # | Product | Office Score | Buy |
|---|---|---|---|
| 1 | MADD TOOLS Paper Towel Holder | 9.7/10 | Buy on Amazon |
| 2 | INCLY 10 Pack Pegboard Hooks | 9.6/10 | Buy on Amazon |
| 3 | KINOMI 6 Pc Drill Holder | 9.6/10 | Buy on Amazon |
| 4 | Acshio 10 Pack Towel Holder | 9.5/10 | Buy on Amazon |
| 5 | Ripeng 4 Pc Ring Holder | 9.4/10 | Buy on Amazon |

MADD TOOLS Paper Towel Holder
A pegboard paper towel holder with a 13 x 4 in shelf rated to 100 lb, for spray cans and rolls under 6.25 x 13 in.
Pros
- 13 x 4 in shelf rated to hold up to 100 lb
- Paper towel compartment fits rolls under 6.25 x 13 in
- 10 pegs fit 1/4 in holes in wood, plastic, MDF and metal
- Front-load design reloads from the front; the fixed rod lets you tear a sheet with a free hand
Cons
- No warranty term is stated
- Holds a paper towel roll first; cans sit on the shelf, not in a ring
- 1 piece in the pack, so a wide board needs extra packs
- 4 in shelf depth leaves little room for wide cans
Detailed Review
MADD TOOLS lists this pegboard paper towel holder with hooks, built from heavy duty metal with a black finish. The 13 x 4 in shelf is rated to hold up to 100 lb, and the paper towel compartment fits rolls under 6.25 x 13 in. The listing states 10 pegs for a snug fit in 1/4 in holes, and says the holder fits wood, plastic, MDF and metal pegboards.
Who it's for: someone who wants spray cans and a paper towel roll on the same pegboard spot, with a shelf rated to 100 lb. Who should skip it: anyone who wants a ring or cradle that grips a can, or a multi-piece pack.
Its Office Score of 9.7/10 comes from performance 32/35, build 22/25, value 21/25, safety 7/10 and warranty 0/5: 82 of 100 points, placed on our 9.2 to 9.8 scale.
Key Specifications
| Shelf | 13 x 4 in |
|---|---|
| Shelf load | Up to 100 lb |
| Pegs | 10 pegs, 1/4 in holes |
| Roll fit | Under 6.25 x 13 in |
Figures as published on the retailer listing, collected 11 November 2026. Performance figures are manufacturer rated.
Safety and Warranty
What this listing states. 10 pegs for a snug fit in 1/4 in holes; shelf rated to 100 lb, so safety scores 7 of 10. No warranty term, so warranty scores zero. See How We Pick.
Anchor it. Anchor tall bookshelves and file cabinets to the wall with the supplied hardware or an anti-tip kit, load the lowest shelves and drawers first, and open one drawer at a time.
This is general buying information, not professional advice. Follow each product manual and local rules, and see our Safety Disclaimer.

INCLY 10 Pack Pegboard Hooks
A 10-piece set in 5 types, from hose and power tool holders to 4 in and 6 in double-arm hooks, with loads of 10 to 20 lb.
Pros
- 10 pieces in 5 types cover hoses, power tools, hammers and folding chairs
- Steel hooks with a vinyl coating resist rust, corrosion and scratches
- Stated loads run 10 to 20 lb, so each hook matches its item
- Installs and removes in seconds, per the listing
Cons
- No warranty term is stated
- Fits 1/4 in pegboards with 2 in hole spacing only; boards with 1 in spacing are out
- 20 lb is the top of a 10 to 20 lb range, not the rating of every hook
- Black color only; no other finish is stated
Detailed Review
INCLY lists this 10-pack of pegboard hooks in 5 types, with 2 pieces of each type: a hose holder, a power tool holder, a double-arm tool holder, and 4 in and 6 in double-arm holders. The listing states loads of 10 to 20 lb across the types, so the 20 lb figure is the top of the range rather than the rating of each hook. The hooks are steel with a vinyl coating that resists rust, corrosion and scratches, per the listing. They fit 1/4 in pegboards with 2 in hole spacing.
Who it's for: someone setting up a garage or workshop wall with drills, hoses and hand tools on 1/4 in pegboard. Who should skip it: anyone whose board uses 1 in hole spacing, or who wants a holder shaped for cans.
Its Office Score of 9.6/10 comes from performance 30/35, build 22/25, value 21/25, safety 7/10 and warranty 0/5: 80 of 100 points, placed on our 9.2 to 9.8 scale.
Key Specifications
| Pack | 10 pieces, 5 types |
|---|---|
| Load | 10 to 20 lb |
| Hole fit | 1/4 in, 2 in spacing |
| Material | Steel, vinyl coating |
Figures as published on the retailer listing, collected 11 November 2026. Performance figures are manufacturer rated.
Safety and Warranty
What this listing states. Steel hooks with vinyl coating; rust, corrosion and scratch resistance stated; loads of 10 to 20 lb, so safety scores 7 of 10. No warranty term, so warranty scores zero. See How We Pick.
Anchor it. Anchor tall bookshelves and file cabinets to the wall with the supplied hardware or an anti-tip kit, load the lowest shelves and drawers first, and open one drawer at a time.
This is general buying information, not professional advice. Follow each product manual and local rules, and see our Safety Disclaimer.

KINOMI 6 Pc Drill Holder
A 6-piece set of neoprene-coated steel hooks for drills and hand tools, rated under 15 lb.
Pros
- Neoprene coating protects tools from scratches while hanging
- Fits 1/4, 3/16 and 1/8 in pegboards 1/4 in thick or less with 1 in spaced holes
- Rated for loads under 15 lb without deforming
- 6 pieces spread drills, hammers and garden tools across a board
Cons
- No warranty term is stated
- Built for drills and hand tools, not for a spray can
- 15 lb limit is lower than the INCLY set at 20 lb and the MADD shelf at 100 lb
- Hook arms are fixed, with no length adjustment
Detailed Review
KINOMI lists this 6-piece set of heavy duty pegboard drill holder hooks in black, made from steel with a neoprene coating. The listing states the hooks fit 1/4, 3/16 and 1/8 in pegboards that are 1/4 in thick or less with 1 in spaced holes, and hold loads under 15 lb without rusting or deforming.
Who it's for: someone who wants coated hooks for drills and hand tools on a standard pegboard. Who should skip it: anyone who needs more than 15 lb per hook, or a holder shaped for cans.
Its Office Score of 9.6/10 comes from performance 29/35, build 21/25, value 21/25, safety 5/10 and warranty 0/5: 76 of 100 points, placed on our 9.2 to 9.8 scale.
Key Specifications
| Pack | 6 pieces |
|---|---|
| Load | Under 15 lb |
| Hole fit | 1/4, 3/16, 1/8 in; 1 in spacing |
| Material | Steel, neoprene coating |
Figures as published on the retailer listing, collected 11 November 2026. Performance figures are manufacturer rated.
Safety and Warranty
What this listing states. Neoprene-coated steel; rust and deformation resistance stated for loads under 15 lb, so safety scores 5 of 10. No warranty term, so warranty scores zero. See How We Pick.
Anchor it. Anchor tall bookshelves and file cabinets to the wall with the supplied hardware or an anti-tip kit, load the lowest shelves and drawers first, and open one drawer at a time.
This is general buying information, not professional advice. Follow each product manual and local rules, and see our Safety Disclaimer.

Acshio 10 Pack Towel Holder
A 10-set pack of pegboard paper towel holders with a rod that adjusts from 11 to 14 in, in black metal.
Pros
- Rod adjusts from 11 to 14 in to fit rolls of different lengths
- 10 sets in the pack, with long, left side and right side brackets
- Fits 1/4, 3/16 and 1/8 in pegboards with 1 in hole spacing
- Metal with a baking paint surface resists rust and is not easy to deform, per the listing
Cons
- No warranty term is stated
- No load limit is stated for the rod or the brackets
- Built for paper towels, tape and ribbons, not for a spray can
- Pegboard is not included
Detailed Review
Acshio lists this 10-pack of paper towel holders for pegboard, with long, left side and right side brackets. The rod in the middle adjusts from 11 to 14 in, and the listing states the holders fit standard 1/4, 3/16 and 1/8 in pegboards with 1 in hole spacing. The holders are metal with a baking paint surface, sturdy and resistant to rust, per the listing.
Who it's for: someone who wants a paper towel or tape holder on several pegboard spots at once. Who should skip it: anyone who needs a stated load limit, or a holder shaped for cans.
Its Office Score of 9.5/10 comes from performance 29/35, build 20/25, value 20/25, safety 5/10 and warranty 0/5: 74 of 100 points, placed on our 9.2 to 9.8 scale.
Key Specifications
| Pack | 10 sets |
|---|---|
| Rod length | 11 to 14 in adjustable |
| Hole fit | 1/4, 3/16, 1/8 in; 1 in spacing |
| Material | Metal, baking paint surface |
Figures as published on the retailer listing, collected 11 November 2026. Performance figures are manufacturer rated.
Safety and Warranty
What this listing states. Metal with baking paint surface; rust resistance stated; not easy to deform or break, so safety scores 5 of 10. No warranty term, so warranty scores zero. See How We Pick.
Anchor it. Anchor tall bookshelves and file cabinets to the wall with the supplied hardware or an anti-tip kit, load the lowest shelves and drawers first, and open one drawer at a time.
This is general buying information, not professional advice. Follow each product manual and local rules, and see our Safety Disclaimer.

Ripeng 4 Pc Ring Holder
A 4-piece set of ring-style pegboard hooks with 12 rings per hook, for screwdrivers and pliers.
Pros
- 12 rings per hook, 6 per side, hold screwdrivers, pliers and small items
- Fits 1/4, 3/16 and 1/8 in holes in metal and non-metal pegboards
- Clips on and locks into the hole with no extra nails
- 4 pieces store about 24 small items
Cons
- No warranty term is stated
- Made for light items only, with no load limit stated
- No coating or finish beyond the silver color is stated
- Ring shape suits slim handles, not spray cans
Detailed Review
Ripeng lists this 4-piece set of ring-style pegboard hooks in silver. Each hook has 12 rings, 6 per side, and the 4 pieces store about 24 small items such as screwdrivers and pliers. The hooks fit pegboards with 1/4, 3/16 and 1/8 in holes, in boards 1/4 in thick or less. They clip on and lock into the hole, with no extra nails needed.
Who it's for: someone who wants screwdrivers and pliers off the bench and onto a pegboard. Who should skip it: anyone who needs a stated load limit, or a holder shaped for cans.
Its Office Score of 9.4/10 comes from performance 28/35, build 19/25, value 19/25, safety 3/10 and warranty 0/5: 69 of 100 points, placed on our 9.2 to 9.8 scale.
Key Specifications
| Pack | 4 pieces |
|---|---|
| Rings | 12 per hook, 6 per side |
| Storage | About 24 small items |
| Hole fit | 1/4, 3/16, 1/8 in; 1/4 in or less |
Figures as published on the retailer listing, collected 11 November 2026. Performance figures are manufacturer rated.
Safety and Warranty
What this listing states. Hooks lock into the hole without shaking, per the listing, so safety scores 3 of 10. No warranty term, so warranty scores zero. See How We Pick.
Anchor it. Anchor tall bookshelves and file cabinets to the wall with the supplied hardware or an anti-tip kit, load the lowest shelves and drawers first, and open one drawer at a time.
This is general buying information, not professional advice. Follow each product manual and local rules, and see our Safety Disclaimer.
As an Amazon Associate I earn from qualifying purchases.
More picks to compare
Ripeng 2 Pc Ring HolderSame ring holder in a 2-piece pack for screwdrivers and pliers.Check on Amazon
Blulu 4 Pc Magazine HolderPegboard shelf for magazines and files in offices and trade shows.Check on Amazon
Rurili 10 Pc Cups HolderLarge ring hooks hold cups on pegboard, 10 pieces per pack.Check on Amazon
Riciakik Spray Can HolderWall-mounted rack with 8 can holes and steel hooks for garages.Check on Amazon
Wall Control Spray Can HolderPegboard bracket holds up to 4 spray cans with a rust resistant finish.Check on Amazon
Specs compared
| Can Holder | Office Score | Hole fit | Load stated | Pack | Material | Warranty | Amazon |
|---|---|---|---|---|---|---|---|
| MADD TOOLS Paper Towel Holder | 9.7/10 | 1/4 in holes | 100 lb | 1 piece | Metal | Not stated | View on Amazon |
| INCLY 10 Pack Pegboard Hooks | 9.6/10 | 1/4 in, 2 in spacing | 10 to 20 lb | 10 pieces | Steel, vinyl coating | Not stated | View on Amazon |
| KINOMI 6 Pc Drill Holder | 9.6/10 | 1/4, 3/16, 1/8 in | Under 15 lb | 6 pieces | Steel, neoprene coating | Not stated | View on Amazon |
| Acshio 10 Pack Towel Holder | 9.5/10 | 1/4, 3/16, 1/8 in | Not stated | 10 sets | Metal, baking paint | Not stated | View on Amazon |
| Ripeng 4 Pc Ring Holder | 9.4/10 | 1/4, 3/16, 1/8 in | Light items | 4 pieces | Metal | Not stated | View on Amazon |
Specs reflect manufacturer claims on each product listing (as of 11 November 2026). Most picks fit 1/4, 3/16 and 1/8 in holes; the INCLY set fits 1/4 in pegboards with 2 in hole spacing.
How to choose the best can holder for pegboard
Start with the hole size and spacing
Start with hole size: a hook that does not match the board will not hang straight. Most picks here fit 1/4, 3/16 and 1/8 in holes, and the Ripeng, KINOMI and Acshio holders fit boards 1/4 in thick or less with 1 in spacing. The INCLY set fits 1/4 in pegboards with 2 in hole spacing, so measure the spacing before ordering. The MADD holder fits 1/4 in holes in wood, plastic, MDF and metal boards. If the board itself still needs choosing, a pegboard for home office guide covers board sizes and layouts.
Match the load to the cans
Read the load line before the finish. The MADD shelf is rated to 100 lb, the INCLY hooks to 10 to 20 lb depending on the type, and the KINOMI hooks to under 15 lb. The Acshio listing states no load limit, and the Ripeng listing suits light items with none stated. Put the heaviest cans on the shelf and the lighter tools on the hooks.
| Holder | Hole fit | Load stated | Pack |
|---|---|---|---|
| MADD TOOLS Paper Towel Holder | 1/4 in | Up to 100 lb | 1 piece |
| INCLY 10 Pack Pegboard Hooks | 1/4 in, 2 in spacing | 10 to 20 lb | 10 pieces |
| KINOMI 6 Pc Drill Holder | 1/4, 3/16, 1/8 in | Under 15 lb | 6 pieces |
| Acshio 10 Pack Towel Holder | 1/4, 3/16, 1/8 in | Not stated | 10 sets |
| Ripeng 4 Pc Ring Holder | 1/4, 3/16, 1/8 in | Light items | 4 pieces |
Material and finish decide how long it lasts
Every holder here is metal, but the finish stands between the steel and rust. The INCLY hooks are steel with a vinyl coating that the listing says resists rust, corrosion and scratches. The KINOMI hooks are steel with a neoprene coating that will not rust or deform under 15 lb, per the listing. The Acshio holders are metal with a baking paint surface that the listing says resists rust. The MADD holder and the Ripeng hooks state no coating. That matters on a pegboard for desk setup near a window.
Pack size and what else it holds
Pack size decides how much of the board an order covers. The INCLY and Acshio packs hold 10 pieces each, the KINOMI pack holds 6, the Ripeng pack holds 4, and the MADD holder comes as 1 piece. The MADD shelf is the only pick shaped for cans: it holds spray cans and paper towel rolls under 6.25 x 13 in. The Acshio rod adjusts from 11 to 14 in, and the Ripeng hooks store about 24 small items.
Setup Notes
- Measure hole diameter and spacing before ordering: most picks fit 1/4, 3/16 and 1/8 in holes with 1 in spacing, while the INCLY set needs 2 in spacing.
- Check board thickness: the Ripeng and KINOMI hooks fit boards 1/4 in thick or less.
- Plan the load: the MADD shelf is rated to 100 lb, the INCLY hooks to 10 to 20 lb, the KINOMI hooks to under 15 lb.
- Leave room to load from the front: the MADD holder loads from the front, and the Acshio rod adjusts from 11 to 14 in.
- Assembly is clip-on: the Ripeng hooks lock into the hole with no extra nails, and the INCLY hooks install in seconds.
FAQ
What size pegboard holes do these holders fit?
Most picks fit 1/4, 3/16 and 1/8 in holes. The MADD holder fits 1/4 in holes, and the INCLY set fits 1/4 in pegboards with 2 in hole spacing.
How do you use pegboard accessories?
The Ripeng hooks clip on and lock into the hole with no extra nails, and the INCLY hooks install and remove in seconds. Hang the holder, check it sits flat, then load within the stated limit.
What is pegboard?
Pegboard is a board with spaced holes that hold hooks, shelves and holders. The listings here mention wood, plastic, MDF and metal boards.
Can you spray paint pegboard?
The listings do not discuss painting a pegboard. The holders arrive in black metal, silver metal and white, with vinyl, neoprene or baking paint coatings.
Why is pegboard so expensive?
The listings state no prices, so there is no price comparison to draw on. What they do state is material and finish: steel hooks with vinyl or neoprene coating, metal with a baking paint surface, and pack sizes of 2, 4, 6 and 10.
Score breakdown
The Office Score weighs performance, build, value, safety and warranty. For a pegboard holder, safety means a stated load limit, a snug peg fit and stated rust or corrosion resistance. No listing here states a warranty term. How we pick explains the weights.
| Product | Office Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| MADD TOOLS Paper Towel Holder | 9.7 | 32 | 22 | 21 | 7 | 0 |
| INCLY 10 Pack Pegboard Hooks | 9.6 | 30 | 22 | 21 | 7 | 0 |
| KINOMI 6 Pc Drill Holder | 9.6 | 29 | 21 | 21 | 5 | 0 |
| Acshio 10 Pack Towel Holder | 9.5 | 29 | 20 | 20 | 5 | 0 |
| Ripeng 4 Pc Ring Holder | 9.4 | 28 | 19 | 19 | 3 | 0 |
The scale opens at 9.2 and closes at 9.8; between those marks, weighted points translate linearly into the score you see.
More for your workspace
See every desk organizers and whiteboards guide and all office machines and storage guides, plus best pegboard office organizer, desk organizer ideas, best office storage racks, best office storage trays, best office storage jars and best ladder desk organizer.
More picks: best office storage metal, best vertical desk organizer, best desk organizer for garage office.





