The best corner rounder small is the punch that rounds a card corner cleanly, without a burr or a torn edge. A stack of business cards with sharp corners looks unfinished beside a rounded set, and a photo corner that catches on everything in a bag is a small annoyance. We compared the small corner rounder punches in this guide by radii, paper weight, blade material, size and warranty term, using only what each listing publishes.
OfficeKitHQ earns a commission when you buy through links on this page, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Affiliate disclosure.
Quick picks
Best Overall Kaluofan P1165: 4 in 1 radii, cuts 80 to 350 gsm, non-slip scrap box Check price on Amazon
Best 3-Way LOONENG CP21A002: 4, 7 and 10 mm radii, zinc alloy blade, lever handle Check price on Amazon
Best Compact MYARTOOL MAT047: 4, 7 and 10 mm radii, stainless blade, fits in your hand Check price on Amazon
Best Scallop QIQQIKIN 6-5: R5, 10 mm and scallop cuts, 70 to 230 gsm card stock Check price on Amazon
Best Single Radius MyLifeUNIT OF16HW0043: 5 mm radius, stainless blade, 70 to 300 gsm paper Check price on Amazon
Our desk picks
| # | Product | Office Score | Buy |
|---|---|---|---|
| 1 | Kaluofan P1165 | 9.6/10 | Buy on Amazon |
| 2 | LOONENG CP21A002 | 9.5/10 | Buy on Amazon |
| 3 | MYARTOOL MAT047 | 9.5/10 | Buy on Amazon |
| 4 | QIQQIKIN 6-5 | 9.4/10 | Buy on Amazon |
| 5 | MyLifeUNIT OF16HW0043 | 9.4/10 | Buy on Amazon |

Kaluofan P1165
A 4 in 1 punch with an inside rounded corner plus R4, R7 and R10 mm, cutting 80 to 350 gsm paper or 4 sheets of A4 at once, with a non-slip scrap box base.
Pros
- Four cuts in one punch, including an inside rounded corner
- Cuts 80 to 350 gsm paper or 4 sheets of A4 at once
- Non-slip removable paper scraps box keeps the desktop clean
- Stainless steel blade with rust proof lubricating oil
Cons
- No warranty term is stated
- No dimensions are stated in the spec table
- Stated range starts at 80 gsm, so lighter paper is outside it
- Needs 5 trial presses on regular paper before first use, per the listing
Detailed Review
Kaluofan lists a 4 in 1 corner punch with an inside rounded corner plus R4, R7 and R10 mm, adding the inside rounded corner to the three standard radii. It cuts paper from 80 g to 350 g, or 4 sheets of ordinary A4 paper at once, and the four directions correspond to different angle effects. The punch uses a lever principle, a quality plastic body and a stainless steel cutting blade protected with rust proof lubricating oil, and its base is a non-slip removable paper scraps box. The spec table states no dimensions, and no warranty term is stated.
Who it's for: someone who wants four corner styles in one punch and cuts heavier paper up to 350 gsm. Who should skip it: anyone who wants stated dimensions or a warranty term in writing.
Its Office Score of 9.6/10 comes from performance 32/35, build 21/25, value 21/25, safety 7/10 and warranty 0/5: 81 of 100 points, placed on our 9.2 to 9.8 scale.
Key Specifications
| Radii | Inside, R4, R7, R10 |
|---|---|
| Paper | 80 to 350 gsm |
| Blade | Stainless steel |
| Sheets at once | 4 sheets of A4 |
Figures as published on the retailer listing, collected 11 November 2026. Performance figures are manufacturer rated.
Safety and Warranty
What this listing states. Non-slip base and burr-free smooth cuts, so safety scores 7 of 10. No warranty term, so warranty scores zero. See How We Pick.
Shredder and printer safety. Keep hair, ties, jewelry, children and pets away from the feed slot, use the safety lock, unplug when not in use, and give printers and adapters room to vent.
This is general buying information, not professional advice. Follow each product manual and local rules, and see our Safety Disclaimer.

LOONENG CP21A002
A 3-way punch cutting 4, 7 and 10 mm radii, with a zinc alloy blade, a lever-type handle and each measurement silkscreened on the top.
Pros
- Three radii in one punch: 4, 7 and 10 mm
- Each corner measurement is silkscreened on the top
- Zinc alloy cutter blade for precision cutting
- Lever-type handle is light and labor-saving
Cons
- No warranty term is stated
- No paper weight range is stated
- Plastic housing, not a metal body
- No scrap box is stated
Detailed Review
LOONENG lists a 3-way corner rounder punch that cuts 4, 7 and 10 mm corner radii, with each measurement silkscreened on the top to choose the size. The durable plastic housing is burr-free and smooth, the zinc alloy cutter blade cuts for a neat and clean appearance, and the lever-type handle is light and labor-saving. The punch suits paper crafts, laminator, cardstock, photocards and more, and the spec table gives dimensions of 2.91 by 2.48 by 1.38 in. No paper weight range or warranty term is stated.
Who it's for: someone who wants three radii in one punch with the sizes marked on top. Who should skip it: anyone who wants a stated paper weight range or a scrap box.
Its Office Score of 9.5/10 comes from performance 30/35, build 21/25, value 21/25, safety 0/10 and warranty 0/5: 72 of 100 points, placed on our 9.2 to 9.8 scale.
Key Specifications
| Radii | 4, 7, 10 mm |
|---|---|
| Blade | Zinc alloy |
| Size | 2.91 by 2.48 by 1.38 in |
| Housing | Plastic |
Figures as published on the retailer listing, collected 11 November 2026. Performance figures are manufacturer rated.
Safety and Warranty
What this listing states. This product does not plug in or run on a battery, so safety is not part of its score. No warranty term, so warranty scores zero. See How We Pick.
Shredder and printer safety. Keep hair, ties, jewelry, children and pets away from the feed slot, use the safety lock, unplug when not in use, and give printers and adapters room to vent.
This is general buying information, not professional advice. Follow each product manual and local rules, and see our Safety Disclaimer.

MYARTOOL MAT047
A 3-way punch cutting 4, 7 and 10 mm radii, with a stainless steel blade and a small sturdy design that fits in the hand.
Pros
- Three radii in one punch: 4, 7 and 10 mm
- Stainless steel cutter blade for precision cutting
- Small sturdy design fits in the hand
- Suits office, school, home and photo studio use
Cons
- No warranty term is stated
- No paper weight range is stated
- Plastic housing, not a metal body
- No scrap box is stated
Detailed Review
MyArTool lists a 3-way corner rounder punch that cuts 4, 7 and 10 mm corner radii for paper crafts, scrapbooks, business cards and gift cards. The durable plastic housing is burr-free and smooth, the stainless steel cutter blade cuts for a neat and clean appearance, and the small sturdy design fits in the hand. It suits paper, photographs, scrapbooking, business cards and gift cards, and the spec table gives dimensions of 2.91 by 2.48 by 1.42 in. No paper weight range or warranty term is stated.
Who it's for: someone who wants three radii and a stainless blade in a hand-sized punch. Who should skip it: anyone who wants a stated paper weight range or a scrap box.
Its Office Score of 9.5/10 comes from performance 30/35, build 21/25, value 20/25, safety 0/10 and warranty 0/5: 71 of 100 points, placed on our 9.2 to 9.8 scale.
Key Specifications
| Radii | 4, 7, 10 mm |
|---|---|
| Blade | Stainless steel |
| Size | 2.91 by 2.48 by 1.42 in |
| Housing | Plastic |
Figures as published on the retailer listing, collected 11 November 2026. Performance figures are manufacturer rated.
Safety and Warranty
What this listing states. This product does not plug in or run on a battery, so safety is not part of its score. No warranty term, so warranty scores zero. See How We Pick.
Shredder and printer safety. Keep hair, ties, jewelry, children and pets away from the feed slot, use the safety lock, unplug when not in use, and give printers and adapters room to vent.
This is general buying information, not professional advice. Follow each product manual and local rules, and see our Safety Disclaimer.

QIQQIKIN 6-5
A 3 in 1 punch cutting R5, straight 10 mm and scallop edges, for 70 to 230 gsm card stock, with an ABS housing and a metal cutter.
Pros
- Three designs in one chomper: R5, 10 mm and scallop
- Cuts 70 to 230 gsm card stock
- ABS housing with a sharp metal cutter
- Smallest stated size here at 2.8 by 2.3 by 1.3 in
Cons
- No warranty term is stated
- Offers R5, 10 mm and scallop, not the 4 and 7 mm radii
- No scrap box is stated
- ABS housing, not a metal body
Detailed Review
QIQQIKIN lists a 3 in 1 corner cutter with three designs on each chomper: R5, straight 10 mm and scallop. It cuts 70 to 230 gsm card stock, and the sturdy ABS housing holds a metal cutter that the listing calls sharp enough for a neat and smooth cut without burr. The spec table gives dimensions of 2.8 by 2.3 by 1.3 in, the smallest stated size here, and lists NumberOfItems as 0, though the listing describes a single chomper. No warranty term is stated.
Who it's for: someone who wants a scallop edge alongside rounded corners for cards and scrapbooks. Who should skip it: anyone who wants 4 and 7 mm radii or a warranty term in writing.
Its Office Score of 9.4/10 comes from performance 29/35, build 20/25, value 20/25, safety 0/10 and warranty 0/5: 69 of 100 points, placed on our 9.2 to 9.8 scale.
Key Specifications
| Radii | R5, 10 mm, scallop |
|---|---|
| Paper | 70 to 230 gsm |
| Size | 2.8 by 2.3 by 1.3 in |
| Housing | ABS, metal cutter |
Figures as published on the retailer listing, collected 11 November 2026. Performance figures are manufacturer rated.
Safety and Warranty
What this listing states. This product does not plug in or run on a battery, so safety is not part of its score. No warranty term, so warranty scores zero. See How We Pick.
Shredder and printer safety. Keep hair, ties, jewelry, children and pets away from the feed slot, use the safety lock, unplug when not in use, and give printers and adapters room to vent.
This is general buying information, not professional advice. Follow each product manual and local rules, and see our Safety Disclaimer.

MyLifeUNIT OF16HW0043
A single-radius punch cutting a 5 mm corner, with a stainless steel blade, a trash tray base and a stated range of 70 to 300 gsm paper.
Pros
- 5 mm cutting radius with a stainless steel blade
- Suits 70 to 300 gsm paper
- Base works as a trash tray for shreds
- Simple operation: push the corner into the guide and press
Cons
- No warranty term is stated
- Only one radius, 5 mm, is offered
- Not for adhesive, overly rigid or overly soft materials
- Thin paper needs two or three layers stacked
Detailed Review
MyLifeUNIT lists a corner rounder punch with a 5 mm cutting radius and a stainless steel blade, suited to 70 to 300 gsm paper. The base works as a trash tray that contains the shreds, and operation is simple: push the corner into the guide, snap it into place, then press the handle. The listing says it is not for adhesive, overly rigid or overly soft materials, and thin paper needs two or three layers stacked. The spec table gives dimensions of 3.5 by 3 by 1.2 in. No warranty term is stated.
Who it's for: someone who wants one clean 5 mm radius for photos and thin laminated documents. Who should skip it: anyone who wants several radii or a warranty term in writing.
Its Office Score of 9.4/10 comes from performance 26/35, build 20/25, value 20/25, safety 0/10 and warranty 0/5: 66 of 100 points, placed on our 9.2 to 9.8 scale.
Key Specifications
| Radius | 5 mm |
|---|---|
| Paper | 70 to 300 gsm |
| Blade | Stainless steel |
| Size | 3.5 by 3 by 1.2 in |
Figures as published on the retailer listing, collected 11 November 2026. Performance figures are manufacturer rated.
Safety and Warranty
What this listing states. This product does not plug in or run on a battery, so safety is not part of its score. No warranty term, so warranty scores zero. See How We Pick.
Shredder and printer safety. Keep hair, ties, jewelry, children and pets away from the feed slot, use the safety lock, unplug when not in use, and give printers and adapters room to vent.
This is general buying information, not professional advice. Follow each product manual and local rules, and see our Safety Disclaimer.
As an Amazon Associate I earn from qualifying purchases.
More picks to compare
Wsyhomie 3 in 1 Corner PunchR4, R7 and R10 mm radii with a rubber base for steady punchingCheck on Amazon
Creative Memories 2-Way Corner RounderTwo cuts at 1/4 inch radius with a scrap catcher underneathCheck on Amazon
EK Tools Mini Corner Rounders SetTwo sizes, 0.50 inch and 1 inch, with a locking punchCheck on Amazon
QWORK Corner Rounder Cutter R33 mm radius for PVC cards, photos and paper up to 1.85 mm thickCheck on Amazon
YOLCAR 3 in 1 Corner Rounder PunchR4, R7 and R10 mm radii in a 2.9 by 2.4 inch bodyCheck on Amazon
Specs compared
| Corner rounder | Office Score | Radii | Paper | Blade | Warranty | Amazon |
|---|---|---|---|---|---|---|
| Kaluofan P1165 | 9.6/10 | Inside, R4, R7, R10 | 80 to 350 gsm | Stainless steel | Not stated | View on Amazon |
| LOONENG CP21A002 | 9.5/10 | 4, 7, 10 mm | Not stated | Zinc alloy | Not stated | View on Amazon |
| MYARTOOL MAT047 | 9.5/10 | 4, 7, 10 mm | Not stated | Stainless steel | Not stated | View on Amazon |
| QIQQIKIN 6-5 | 9.4/10 | R5, 10 mm, scallop | 70 to 230 gsm | Metal | Not stated | View on Amazon |
| MyLifeUNIT OF16HW0043 | 9.4/10 | 5 mm | 70 to 300 gsm | Stainless steel | Not stated | View on Amazon |
Specs reflect manufacturer claims on each product listing (as of 11 November 2026). None of the five state a warranty term; one states a non-slip base and burr-free cuts.
How to choose the best corner rounder small
Count the radii you will use
Radii are the first thing to count, because each radius suits a different card size. The Kaluofan cuts four: an inside rounded corner plus R4, R7 and R10 mm. The LOONENG and MYARTOOL each cut three radii at 4, 7 and 10 mm, the QIQQIKIN cuts R5, straight 10 mm and a scallop, and the MyLifeUNIT cuts a single 5 mm radius. If you round corners for several card sizes, a corner rounder punch with three or four radii covers more jobs than a single-radius punch, while the scallop on the QIQQIKIN suits decoration rather than plain corners.
Match the paper weight
Paper weight decides whether the punch cuts cleanly or jams. The Kaluofan cuts 80 to 350 gsm paper or 4 sheets of ordinary A4 paper at once, the MyLifeUNIT suits 70 to 300 gsm, and the QIQQIKIN cuts 70 to 230 gsm card stock. The LOONENG and MYARTOOL listings state no paper weight range, so check your stock against the stated ranges before you buy. For heavier stock, a corner rounder for thick paper is the next place to look.
| Punch | Radii | Paper weight | Blade |
|---|---|---|---|
| Kaluofan P1165 | Inside, R4, R7, R10 | 80 to 350 gsm | Stainless steel |
| LOONENG CP21A002 | 4, 7, 10 mm | Not stated | Zinc alloy |
| MYARTOOL MAT047 | 4, 7, 10 mm | Not stated | Stainless steel |
| QIQQIKIN 6-5 | R5, 10 mm, scallop | 70 to 230 gsm | Metal |
| MyLifeUNIT OF16HW0043 | 5 mm | 70 to 300 gsm | Stainless steel |
Figures as stated in each listing. The MyLifeUNIT is the widest here at 3.5 by 3 in, and the QIQQIKIN has the smallest stated length and width at 2.8 by 2.3 in. The Kaluofan states no dimensions.
Check the blade and the housing
Blade material decides how clean the cut stays over time. The Kaluofan, MYARTOOL and MyLifeUNIT state a stainless steel blade, the LOONENG states a zinc alloy blade, and the QIQQIKIN states a metal cutter in an ABS housing. The LOONENG, MYARTOOL and Kaluofan housings are plastic, and the Kaluofan blade is protected with rust proof lubricating oil. A craft paper trimmer handles straight edges while the rounder handles corners, so keep both tools on the desk if you cut cards often.
Read the warranty line
None of the five listings state a warranty term. The Kaluofan, LOONENG, MYARTOOL, QIQQIKIN and MyLifeUNIT listings give no warranty figure, so compare them on radii, paper weight and blade instead. A punch is a simple tool with few parts to fail, but a written term still matters when the blade dulls early.
Setup Notes
- Check the paper first: the Kaluofan cuts 80 to 350 gsm paper or 4 sheets of A4 at once, the QIQQIKIN cuts 70 to 230 gsm, and the MyLifeUNIT suits 70 to 300 gsm.
- Pick the radius before you press: the LOONENG has each corner measurement silkscreened on the top, and the Kaluofan marks four directions for its four cuts.
- Plan for scraps: the Kaluofan base is a non-slip removable paper scraps box, and the MyLifeUNIT base works as a trash tray.
- Mind the limits: the MyLifeUNIT is not for adhesive, overly rigid or overly soft materials, so keep cardboard, acrylic and plastic out of it.
FAQ
How many radii does the Kaluofan punch cut?
Four: an inside rounded corner plus R4, R7 and R10 mm. The LOONENG and MYARTOOL each cut three radii at 4, 7 and 10 mm, the QIQQIKIN cuts R5, 10 mm and a scallop, and the MyLifeUNIT cuts a single 5 mm radius.
What paper weight can these punches cut?
The Kaluofan cuts 80 to 350 gsm paper or 4 sheets of A4 at once, the MyLifeUNIT suits 70 to 300 gsm, and the QIQQIKIN cuts 70 to 230 gsm card stock. The LOONENG and MYARTOOL listings state no paper weight range.
Which punches state a stainless steel blade?
The Kaluofan, MYARTOOL and MyLifeUNIT state a stainless steel blade. The LOONENG states a zinc alloy blade, and the QIQQIKIN states a metal cutter.
Which of these punches state a warranty term?
None of the five state a warranty term. The Kaluofan, LOONENG, MYARTOOL, QIQQIKIN and MyLifeUNIT listings give no warranty figure, so compare them on radii, paper weight and blade instead.
Which punch has the smallest stated footprint?
The QIQQIKIN, at 2.8 by 2.3 in, has the smallest stated length and width. The MyLifeUNIT is the widest at 3.5 by 3 in, and the Kaluofan states no dimensions.
Score breakdown
The Office Score weighs performance (radii offered and paper weight range), build (housing, blade and size), value for the stated specs, safety and warranty. For a corner rounder, safety means a stated non-slip base or burr-free cut edges; only the Kaluofan states those. None of the five listings state a warranty term. How we pick explains the weights.
| Product | Office Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| Kaluofan P1165 | 9.6 | 32 | 21 | 21 | 7 | 0 |
| LOONENG CP21A002 | 9.5 | 30 | 21 | 21 | 0 | 0 |
| MYARTOOL MAT047 | 9.5 | 30 | 21 | 20 | 0 | 0 |
| QIQQIKIN 6-5 | 9.4 | 29 | 20 | 20 | 0 | 0 |
| MyLifeUNIT OF16HW0043 | 9.4 | 26 | 20 | 20 | 0 | 0 |
The scale opens at 9.2 and closes at 9.8; between those marks, weighted points translate linearly into the score you see.
More for your workspace
See every label makers and shredders guide and all office storage guides. Also see our best corner rounder punch. Also see our best corner rounder thick paper. Also see our best hole punch for scrapbooking. Also see our best label maker for scrapbooking.
More picks: best photo scanner for scrapbooking, best label maker, best paper shredder 20 sheets.





