The best headset and control stand keeps the headset and the controllers off the desk and within reach, because a headset left on the desk gathers dust and a controller left in a drawer is never charged when it is needed. A stand that holds the headset, parks the controllers and, on one pick here, charges a phone too turns a cluttered corner into a setup that is ready to use. We compared five headset and control stands by what they hold, how they charge, how they mount, stated materials, assembly and warranty term, using only what each listing publishes.
OfficeKitHQ earns a commission when you buy through links on this page, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Affiliate disclosure.
Quick picks
Best Overall TPEETEEK CLAMP STAND: Aluminum clamp stand, 2-year warranty, fits desks to 1.95 in Check price on Amazon
Best Rotating OIVO ROTATING STAND: 360-degree swivel, height adjustable, phone holder, 1-year warranty Check price on Amazon
Best Wood UPERGO VD-4B: Solid wood stand, 2-year warranty, holds headset and controller Check price on Amazon
Best Charging KDD KDD-752W: Wireless charging, 2 USB and 1 Type-C, 9 light modes Check price on Amazon
Best Organizer KDD KDD-713: Cable holes and phone groove, metal base, 1.1 lb Check price on Amazon
Our desk picks
| # | Product | Office Score | Buy |
|---|---|---|---|
| 1 | TPEETEEK CLAMP STAND | 9.7/10 | Buy on Amazon |
| 2 | OIVO ROTATING STAND | 9.7/10 | Buy on Amazon |
| 3 | UPERGO VD-4B | 9.6/10 | Buy on Amazon |
| 4 | KDD KDD-752W | 9.6/10 | Buy on Amazon |
| 5 | KDD KDD-713 | 9.6/10 | Buy on Amazon |

TPEETEEK CLAMP STAND
An aluminum clamp stand that hangs a headset and controller from a desk edge up to 1.95 in thick, with a 2-year warranty.
Pros
- Aluminum supporting bar with a high-temperature paint finish resists oxidation and wear
- Clamp fits desks up to 1.95 in thick and mounts on top or underneath
- 2-year warranty is the longest term stated here, shared with the UPERGO
- Silicone pads in the holder and an EVA pad on the clamp protect gear and desk
Cons
- Clamp mount needs a desk edge no thicker than 1.95 in
- No wireless charging or USB ports are stated
- No rotation or phone holder is stated
- Holds one headset and one controller, fewer controllers than the KDD RGB
Detailed Review
TpeeTeek lists this stand as a 2-in-1 headset and controller stand that clamps to a desk edge up to 1.95 in thick, with an aluminum supporting bar coated in a high-temperature paint finish. Silicone pads sit in the controller holder, and an EVA pad on the clamp protects the desk. The listing states a 2-year warranty. It mounts on top of the desk or underneath and holds most over-ear headphones and controllers for PS5, Xbox Series X/S and more.
Who it's for: someone who wants the stand off the desk surface and has a desk edge no thicker than 1.95 in. Who should skip it: anyone with a thicker desk edge or who wants wireless charging.
Its Office Score of 9.7/10 comes from performance 29/35, build 22/25, value 20/25, safety 7/10 and warranty 3/5: 81 of 100 points, placed on our 9.2 to 9.8 scale.
Key Specifications
| Mount | Clamp, 1.95 in max desk |
|---|---|
| Material | Aluminum bar |
| Warranty | 2 years |
| Holds | Headset and controller |
Figures as published on the retailer listing, collected 10 November 2026. Performance figures are manufacturer rated.
Safety and Warranty
What this listing states. Soft silicone pads in the controller holder and an EVA pad on the clamp are stated, so safety scores 7 of 10. 2 Years. It does not say everything a buyer needs, such as who pays return shipping, so warranty scores 3 of 5. See How We Pick.
Protect your hearing. Keep volume moderate during long calls, take breaks, and treat noise cancelling and battery figures as the maker's claims.
This is general buying information, not professional advice. Follow each product manual and local rules, and see our Safety Disclaimer.

OIVO ROTATING STAND
A rotating stand with adjustable height, a phone holder and room for a headset and 2 controllers, assembled in about 15 seconds.
Pros
- 360-degree swivel hook positions the headset where it is wanted
- Height adjusts with a knob so headset and controller do not touch
- Assembles from 3 parts in about 15 seconds with no tools
- Phone holder and cord slot keep a phone and headset cable in reach
Cons
- No charging ports or wireless charging are stated
- Material of the stand body is not stated
- 1-year manufacturer warranty is shorter than the 2-year terms here
- The listing says to lower the height at the back or the stand can tip
Detailed Review
OIVO lists this stand as a rotating headset and controller stand that assembles from 3 parts in about 15 seconds with no tools. The 360-degree swivel headphone hook turns to position the headset, a cord slot suits wired headphone users, and the height adjusts with a knob so the headset and controller do not touch. A phone holder sits on the stand, and silicone anti-slip pads protect the headset and controller while 4 non-slip pads grip the base. It measures 5.04 by 7.83 by 14.06 in, weighs 0.5 lb, and states a 1-year manufacturer warranty.
Who it's for: someone who wants a rotating hook, adjustable height and a phone holder. Who should skip it: anyone who wants wireless charging or a wood stand.
Its Office Score of 9.7/10 comes from performance 30/35, build 20/25, value 21/25, safety 7/10 and warranty 3/5: 81 of 100 points, placed on our 9.2 to 9.8 scale.
Key Specifications
| Height | 14.06 in |
|---|---|
| Item weight | 0.5 lb |
| Rotation | 360 degrees |
| Warranty | 1 year |
Figures as published on the retailer listing, collected 10 November 2026. Performance figures are manufacturer rated.
Safety and Warranty
What this listing states. Soft silicone anti-slip pads on the hanger and cradle and 4 non-slip pads at the base are stated, so safety scores 7 of 10. 1 Year Manufacturer. It does not say everything a buyer needs, such as who pays return shipping, so warranty scores 3 of 5. See How We Pick.
Protect your hearing. Keep volume moderate during long calls, take breaks, and treat noise cancelling and battery figures as the maker's claims.
This is general buying information, not professional advice. Follow each product manual and local rules, and see our Safety Disclaimer.

UPERGO VD-4B
A solid wood stand for 1 headset and 1 controller with a 2-year manufacturer warranty and setup in under 2 minutes.
Pros
- Solid wood build with a smooth sanded finish and non-slip grips
- 2-year manufacturer warranty is the longest term stated here, shared with the TpeeTeek
- Sets up in under 2 minutes with the included hardware
- Fits PS5, Xbox Series S/X and Switch Pro controllers
Cons
- Holds only 1 headset and 1 controller
- No charging ports or wireless charging are stated
- No rotation, height adjustment or phone holder is stated
Detailed Review
UPERGO lists this stand as a solid wood headphone stand with a controller holder that holds 1 headset and 1 controller. The base has non-slip grips, the finish is smooth sanded wood, and setup takes under 2 minutes with the included hardware. The listing states a 2-year manufacturer warranty. It fits standard headphone styles plus PS5, Xbox Series S/X and Switch Pro controllers, and it arrives in a gift-ready box. The title and bullets describe natural solid wood with a warm wood grain, while the spec table lists the color as Black, with no stain or finish detail to reconcile the two.
Who it's for: someone who wants a wood stand that doubles as desk decor and holds one headset and one controller. Who should skip it: anyone who needs room for a second controller or wants charging.
Its Office Score of 9.6/10 comes from performance 27/35, build 22/25, value 20/25, safety 7/10 and warranty 3/5: 79 of 100 points, placed on our 9.2 to 9.8 scale.
Key Specifications
| Material | Solid wood |
|---|---|
| Holds | 1 headset, 1 controller |
| Assembly | Under 2 minutes |
| Warranty | 2 years |
Figures as published on the retailer listing, collected 10 November 2026. Performance figures are manufacturer rated.
Safety and Warranty
What this listing states. Non-slip grips keep the base planted, per the listing, so safety scores 7 of 10. 2 Year Manufacturer. It does not say everything a buyer needs, such as who pays return shipping, so warranty scores 3 of 5. See How We Pick.
Protect your hearing. Keep volume moderate during long calls, take breaks, and treat noise cancelling and battery figures as the maker's claims.
This is general buying information, not professional advice. Follow each product manual and local rules, and see our Safety Disclaimer.

KDD KDD-752W
A wireless charging stand with 9 light modes, 2 USB and 1 Type-C ports, holding 1 headset and 2 controllers or 4 controllers.
Pros
- Wireless charging plus 2 USB and 1 Type-C ports charge a phone, tablet or other devices
- Holds 1 headset and 2 controllers, or 4 controllers at the same time
- 9 light modes with a memory function, in 7 colors
- Multiple protection systems guard against overloading, short-circuiting and over-current
Cons
- No warranty term is stated
- Type-C port cannot be used for charging iPhone, per the listing
- Plastic casing where the TpeeTeek and UPERGO use aluminum and solid wood
- Light modes suit a gaming desk more than a plain office desk
Detailed Review
KDD lists this stand as a headphone and controller stand with wireless charging and 9 light modes. It holds one headset and two controllers, or four game controllers at the same time, and the headset stand rotates 360 degrees with cable storage. It has 2 USB ports and 1 Type-C port for charging a phone, tablet or other devices, and the listing notes the Type-C port cannot be used for charging iPhone. Multiple protection systems guard against overloading, short-circuiting and over-current. Assembly takes 3 parts in 30 seconds, and no warranty term is stated.
Who it's for: someone who wants wireless charging, extra USB ports and room for up to 4 controllers. Who should skip it: anyone who wants a warranty term in writing or a wood stand.
Its Office Score of 9.6/10 comes from performance 33/35, build 22/25, value 21/25, safety 8/10 and warranty 0/5: 84 of 100 points, placed on our 9.2 to 9.8 scale.
Key Specifications
| Charging | Wireless, 2 USB, 1 Type-C |
|---|---|
| Light modes | 9 |
| Rotation | 360 degrees |
| Holds | 1 headset, 2 controllers |
Figures as published on the retailer listing, collected 10 November 2026. Performance figures are manufacturer rated.
Safety and Warranty
What this listing states. Multiple protection systems against overloading, short-circuiting and over-current are stated, so safety scores 8 of 10. No warranty term, so warranty scores zero. See How We Pick.
Protect your hearing. Keep volume moderate during long calls, take breaks, and treat noise cancelling and battery figures as the maker's claims.
This is general buying information, not professional advice. Follow each product manual and local rules, and see our Safety Disclaimer.

KDD KDD-713
A metal-base stand with an aluminum bar, cable holes and a phone groove, holding 2 pads and 1 headphone.
Pros
- Cable holes organize headset and controller charging cables
- Metal base with a low center of gravity and a silicone pad resists slipping
- Groove holds a smart phone or Switch 2 beside the headset
- Aluminum supporting bar with rubber on the hooks protects gear from slipping off
Cons
- No warranty term is stated
- No charging ports or wireless charging are stated
- No rotation or height adjustment is stated
Detailed Review
KDD lists this stand as a headphone stand and controller holder with an aluminum supporting bar, a metal base and cable holes for headset and controller charging cables. The hook is pasted with rubber, the base has a silicone pad, and the stand holds up to 2 pads and 1 headphone, with a groove for a smart phone or Switch 2. The bullets give a height of 11.2 in with a 6.7 in length and 5.9 in width, while the spec table lists 6.7 by 7.09 by 2.05 in; the bullets are the stated size used here. It weighs 1.1 lb, assembles in about 5 minutes, and states no warranty term.
Who it's for: someone who wants cable holes, a phone groove and a metal base on a compact stand. Who should skip it: anyone who wants a stated warranty term or a clamp mount.
Its Office Score of 9.6/10 comes from performance 28/35, build 21/25, value 20/25, safety 7/10 and warranty 0/5: 76 of 100 points, placed on our 9.2 to 9.8 scale.
Key Specifications
| Height | 11.2 in |
|---|---|
| Item weight | 1.1 lb |
| Material | Aluminum bar, metal base |
| Assembly | About 5 minutes |
Figures as published on the retailer listing, collected 10 November 2026. Performance figures are manufacturer rated.
Safety and Warranty
What this listing states. Rubber on the hooks and a silicone pad under the base are stated, so safety scores 7 of 10. No warranty term, so warranty scores zero. See How We Pick.
Protect your hearing. Keep volume moderate during long calls, take breaks, and treat noise cancelling and battery figures as the maker's claims.
This is general buying information, not professional advice. Follow each product manual and local rules, and see our Safety Disclaimer.
As an Amazon Associate I earn from qualifying purchases.
More picks to compare
KDD KDD-752W BlackBlack version of the KDD-752W with wireless charging and 9 light modesCheck on Amazon
Velavow Wooden StandWooden 4-in-1 stand with tray for headsets, controllers and small accessoriesCheck on Amazon
Luckit RGB StandRGB stand holding 1 headphone and 2 controllers with 2 USB portsCheck on Amazon
Specs compared
| Stand | Office Score | Holds | Charging | Height | Warranty | Amazon |
|---|---|---|---|---|---|---|
| TPEETEEK CLAMP STAND | 9.7/10 | Headset and controller | Not stated | Clamp, 1.95 in max desk | 2 years | View on Amazon |
| OIVO ROTATING STAND | 9.7/10 | Headset, 2 controllers | Not stated | 14.06 in | 1 year | View on Amazon |
| UPERGO VD-4B | 9.6/10 | 1 headset, 1 controller | Not stated | Not stated | 2 years | View on Amazon |
| KDD KDD-752W | 9.6/10 | 1 headset, 2 controllers | Wireless, 2 USB, 1 Type-C | Not stated | Not stated | View on Amazon |
| KDD KDD-713 | 9.6/10 | 2 pads, 1 headphone | Not stated | 11.2 in | Not stated | View on Amazon |
Dimensions, weight limits and ranges are the maker’s ratings as each listing gives them, collected 10 November 2026. Three of the five state a warranty term.
How to choose the best headset and control stand
Count the controllers first
Capacity is the first split. The KDD RGB holds 1 headset and 2 controllers, or 4 controllers at the same time, and the OIVO holds a headset and 2 controllers. The TpeeTeek and the UPERGO each hold 1 headset and 1 controller, while the KDD-713 holds 2 pads and 1 headphone. If two controllers live on the desk, only the KDD RGB and the OIVO have room for both. A headset stand for a gaming desk guide covers more options.
Charging changes the shortlist
Only one pick here charges anything. The KDD RGB offers wireless charging plus 2 USB ports and 1 Type-C port for a phone, tablet or other devices, and the listing notes the Type-C port cannot be used for charging iPhone. The other four state no charging ports at all, so a phone stays on its own charger with those stands. See our best wireless headset with stand guide for headsets that bring their own charging stand.
Measure the desk before the clamp
Mounting decides fit. The TpeeTeek clamps to a desk edge up to 1.95 in thick and mounts on top of the desk or underneath, so measure the edge before ordering. The other four stand on the desk: the OIVO stands 14.06 in tall and the KDD-713 stands 11.2 in tall, so check the clearance under a shelf or a monitor arm. The UPERGO and the KDD RGB state no height, so leave room above them.
| Stand | Height | Holds | Charging |
|---|---|---|---|
| TPEETEEK CLAMP STAND | Clamp, 1.95 in max desk | Headset and controller | Not stated |
| OIVO ROTATING STAND | 14.06 in | Headset, 2 controllers | Not stated |
| UPERGO VD-4B | Not stated | 1 headset, 1 controller | Not stated |
| KDD KDD-752W | Not stated | 1 headset, 2 controllers | Wireless, 2 USB, 1 Type-C |
| KDD KDD-713 | 11.2 in | 2 pads, 1 headphone | Not stated |
Figures as stated in each listing.
Wood, aluminum or plastic
Materials split the group three ways. The UPERGO is solid wood with a smooth sanded finish, the TpeeTeek uses an aluminum supporting bar with a high-temperature paint finish, and the KDD-713 pairs an aluminum bar with a metal base. The KDD RGB uses a hardened plastic casing, and the OIVO states no body material. A desktop headset stand guide has more material options.
Read the warranty line
Three of the five state a warranty term. The TpeeTeek states 2 years and the UPERGO states a 2-year manufacturer warranty, while the OIVO states a 1-year manufacturer warranty. The KDD RGB and the KDD-713 state no warranty term, so the buyer has only the listing support promises to rely on.
Setup Notes
- Measure the desk edge first: the TpeeTeek clamp fits edges up to 1.95 in thick.
- Check vertical clearance: the OIVO is 14.06 in tall and the KDD-713 is 11.2 in tall.
- Plan power for the KDD RGB: wireless charging plus 2 USB and 1 Type-C ports need an outlet.
- Assembly runs from about 15 seconds for the OIVO and 30 seconds for the KDD RGB to under 2 minutes for the UPERGO and about 5 minutes for the KDD-713.
FAQ
Which stand here holds the most controllers?
The KDD RGB holds 1 headset and 2 controllers, or 4 controllers at the same time. The OIVO holds a headset and 2 controllers.
Which of these stands can charge a phone?
Only the KDD RGB, with wireless charging plus 2 USB ports and 1 Type-C port. The listing notes the Type-C port cannot be used for charging iPhone.
What desk thickness fits the clamp stand?
The TpeeTeek clamp fits desk edges up to 1.95 in thick.
Which stands state a 2-year warranty?
The TpeeTeek and the UPERGO state 2 years, while the OIVO states 1 year. The KDD RGB and the KDD-713 state no warranty term.
Which stand is made of solid wood?
The UPERGO is listed as solid wood with a smooth sanded finish, while the spec table lists its color as Black and the title and bullets describe natural solid wood.
Score breakdown
The Office Score weighs performance (what each stand holds, charging and mounting), build (materials and stated construction), value for the stated specs, safety and warranty. For a headset stand, safety means stated protection systems, anti-slip pads and a stable base; all five state one. Three listings state a warranty term: TpeeTeek at 2 years, OIVO at 1 year and UPERGO at 2 years. How we pick explains the weights.
| Product | Office Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| TPEETEEK CLAMP STAND | 9.7 | 29 | 22 | 20 | 7 | 3 |
| OIVO ROTATING STAND | 9.7 | 30 | 20 | 21 | 7 | 3 |
| UPERGO VD-4B | 9.6 | 27 | 22 | 20 | 7 | 3 |
| KDD KDD-752W | 9.6 | 33 | 22 | 21 | 8 | 0 |
| KDD KDD-713 | 9.6 | 28 | 21 | 20 | 7 | 0 |
Office Scores run on a short 9.2 to 9.8 scale. We place each item’s weighted point total on it in proportion, so a larger total is always shown as a larger score.
More for your workspace
See every headset guide and all audio, power and connectivity guides, plus our best desktop headset stand, best headset stand for gaming desk, best wall mounted headset stand, best headset hook for desk, best wireless headset with stand, best headset stand for standing desk, best desktop headset stand under 20 and best headset for work guides.
More picks: docking stations and USB hubs, computer speakers, standing desks.





