The best microphone and stand with phone mount holds the phone where lyrics, a script or call controls stay in view while the microphone stays put. A morning call with a dim webcam and a chair that sinks by noon is hard enough without a phone sliding off mid-sentence. We compared the stands and mounts below by pole fit, phone fit, adjustment, clamp hold and warranty term, using only what each listing publishes.
OfficeKitHQ earns a commission when you buy through links on this page, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Affiliate disclosure.
Quick picks
Best Overall GUITTO GMS-04: Complete floor stand with phone and tablet holder to 10 in, boom to 70 in Check price on Amazon
Best Phone Size Range Sunmig Phone Holder: Stated 4.7 to 7 in phone fit with anti-slip padding and a 1 Year warranty Check price on Amazon
Best Gooseneck JCWINY PH01: 12cm soft metal gooseneck bends to any viewing angle, O-Style Buckle Lock Check price on Amazon
Best Clamp Range ZMHH ZM09: Super clamp jaw fits 0.866 to 3.43 in, with a stated 3.3 lb capacity Check price on Amazon
Best Rotation JCWINY Dual Ballhead: Dual ball-head with 360-degree rotation, pole fit from 0.4 to 1.2 in Check price on Amazon
Our desk picks
| # | Product | Office Score | Buy |
|---|---|---|---|
| 1 | GUITTO GMS-04 | 9.8/10 | Buy on Amazon |
| 2 | Sunmig Phone Holder | 9.7/10 | Buy on Amazon |
| 3 | JCWINY PH01 | 9.6/10 | Buy on Amazon |
| 4 | ZMHH ZM09 | 9.6/10 | Buy on Amazon |
| 5 | JCWINY Dual Ballhead | 9.6/10 | Buy on Amazon |

GUITTO GMS-04
The only floor stand here, with a built-in phone and tablet holder, an adjustable boom arm and a heavy-duty base.
Pros
- Built-in holder mounts a phone or a tablet up to 10 in beside the microphone
- Boom arm and height adjust up to 70 in for seated or standing use
- Heavy-duty base is stated to prevent wobbling and tipping
- 3/8 in to 5/8 in adapter is included for most microphones
Cons
- Floor stand takes more room than a clamp that fits an existing stand
- No load capacity is stated for the boom arm or the holder
- No phone width range is stated beyond the 10 in tablet limit
- Listing leans on performance claims that cannot be checked from specs
Detailed Review
GUITTO lists the GMS-04 as a microphone floor stand with a built-in phone and tablet holder for streaming, podcasting, recording and live performances. The boom arm and height run up to 70 in, the heavy-duty base is stated to prevent wobbling and tipping, and the holder takes phones and tablets up to 10 in. A 3/8 in to 5/8 in adapter is included, assembly and disassembly are quick, and the design is lightweight. The spec table gives a 1-year manufacturer warranty for manufacturing defects.
Who it's for: someone who wants a complete stand with a phone or tablet mount. Who should skip it: anyone who already owns a mic stand and only needs a phone clamp.
Its Office Score of 9.8/10 comes from performance 32/35, build 22/25, value 21/25, safety 8/10 and warranty 4/5: 87 of 100 points, placed on our 9.2 to 9.8 scale.
Key Specifications
| Height | Up to 70 in |
|---|---|
| Device fit | Phones and tablets up to 10 in |
| Adapter | 3/8 in to 5/8 in included |
| Base | Heavy-duty |
Figures as published on the retailer listing, collected 11 November 2026. Performance figures are manufacturer rated.
Safety and Warranty
What this listing states. Heavy-duty base stated to prevent wobbling and tipping, so safety scores 8 of 10. 1-year manufacturer warranty. It does not say everything a buyer needs, such as who pays return shipping, so warranty scores 4 of 5. See How We Pick.
Protect your hearing. Keep volume moderate during long calls, take breaks, and treat noise cancelling and battery figures as the maker's claims.
This is general buying information, not professional advice. Follow each product manual and local rules, and see our Safety Disclaimer.

Sunmig Phone Holder
A tool-free clamp for mic stand poles from 0.4 to 1.1 in, sized for phones with 4.7 to 7 in screens.
Pros
- Phone size range of 4.7 to 7 in screens is stated plainly
- Anti-slip rubber padding is stated to protect the phone and stop slipping
- Tool-free installation fits poles from 0.4 to 1.1 in
- 1 Year Manufacturer warranty is stated in the spec table
Cons
- No adjustment range is stated beyond the clamp and the phone size
- No gooseneck or ball-head angle control is stated
- No load capacity is stated for the clamp
- No tablet fit is stated, unlike the GUITTO pick
Detailed Review
Sunmig lists this holder as a phone clamp for microphone stands, music stands, drum stands, light stands and tripods, fitting poles from 0.4 to 1.1 in. It takes smartphones with 4.7 to 7 in screens, and anti-slip rubber padding holds the phone and protects it from scratches. Installation is tool-free, and the spec table states a 1 Year Manufacturer warranty. No gooseneck, ball head or tilt range is stated, so the viewing angle comes from the stand.
Who it's for: someone with a 4.7 to 7 in phone who wants a simple clamp. Who should skip it: anyone who needs a tablet mount.
Its Office Score of 9.7/10 comes from performance 29/35, build 21/25, value 21/25, safety 7/10 and warranty 4/5: 82 of 100 points, placed on our 9.2 to 9.8 scale.
Key Specifications
| Pole fit | 0.4 to 1.1 in |
|---|---|
| Phone fit | 4.7 to 7 in screens |
| Install | Tool-free |
| Warranty | 1 Year Manufacturer |
Figures as published on the retailer listing, collected 11 November 2026. Performance figures are manufacturer rated.
Safety and Warranty
What this listing states. Anti-slip rubber padding stated to stop slipping and protect the phone, so safety scores 7 of 10. 1 Year Manufacturer. It does not say everything a buyer needs, such as who pays return shipping, so warranty scores 4 of 5. See How We Pick.
Protect your hearing. Keep volume moderate during long calls, take breaks, and treat noise cancelling and battery figures as the maker's claims.
This is general buying information, not professional advice. Follow each product manual and local rules, and see our Safety Disclaimer.

JCWINY PH01
A flexible phone holder with a 12cm gooseneck and an O-Style Buckle Lock that clamps poles from 0.4 to 1.1 in.
Pros
- 12cm soft metal gooseneck bends to horizontal, vertical or tilted angles
- O-Style Buckle Lock is stated to hold the phone without drifting down
- Fits poles from 0.4 to 1.1 in, including mic, music and light stands
- 90 days warranty is stated in the spec table
Cons
- 90 days is the lowest warranty term stated here
- No phone size range is stated in inches
- No load capacity is stated for the gooseneck or the clamp
Detailed Review
JCWINY lists the PH01 as a flexible phone holder for microphone stands with a 12cm soft metal gooseneck that bends to horizontal, vertical, face-up, face-down or tilted angles. The clamp fits 0.4 to 1.1 in poles, and the O-Style Buckle Lock is stated to hold the phone so it does not drift down when touched. The holder is stated to fit nearly all smartphones with or without a case, including iPhone 14, 13 and 12 and Samsung Galaxy models. The spec table states a 90-day warranty and lists 3 items, but the bullets do not say what the three parts are.
Who it's for: someone who wants a bendable gooseneck. Who should skip it: anyone who wants a longer warranty.
Its Office Score of 9.6/10 comes from performance 28/35, build 20/25, value 20/25, safety 7/10 and warranty 3/5: 78 of 100 points, placed on our 9.2 to 9.8 scale.
Key Specifications
| Gooseneck | 12cm soft metal |
|---|---|
| Pole fit | 0.4 to 1.1 in |
| Lock | O-Style Buckle Lock |
| Warranty | 90 days |
Figures as published on the retailer listing, collected 11 November 2026. Performance figures are manufacturer rated.
Safety and Warranty
What this listing states. O-Style Buckle Lock stated to give strong clamp force, so safety scores 7 of 10. 90 days. It does not say everything a buyer needs, such as who pays return shipping, so warranty scores 3 of 5. See How We Pick.
Protect your hearing. Keep volume moderate during long calls, take breaks, and treat noise cancelling and battery figures as the maker's claims.
This is general buying information, not professional advice. Follow each product manual and local rules, and see our Safety Disclaimer.

ZMHH ZM09
A two-stage arm with a super clamp, three ball joints and a stated 3.3 lb capacity, for mic stands and much wider poles.
Pros
- Super clamp jaw fits surfaces from 0.866 in to 3.43 in, wider than the other clamps
- Stated 3.3 lb capacity is the only load figure in this group
- Two-stage arms with three ball joints adjust angle and rotation
- Clip stretches to 5.12 in and adds a 1/4-20 screw hole and a cold shoe
Cons
- No warranty term is stated in the spec table
- Phone-size line reads 3.57.5 inch, which looks like a missing dash
- Two-stage arm adds bulk beside a simple clip clamp
- No phone width in inches is stated beyond the clip stretch
Detailed Review
ZMHH lists the ZM09 as a two-stage magic arm with a super clamp for microphone stands, music stands, handlebars, booms, tripods and railings. The upper arm is optical nylon fiber, the lower arm is aluminum alloy, and three ball joints run through the two arms with a stated capacity up to 3.3 lbs. The super clamp jaw fits 0.866 in (2.2 cm) to 3.43 in (8.7 cm) surfaces, the phone clip stretches to 5.12 in (13 cm), and a 17mm ball head socket, a 1/4-20 screw hole and a cold shoe are included. The bullets read 3.57.5 inch for phone size, which looks like a missing dash, so check the 5.12 in clip stretch against the phone. No warranty term is stated.
Who it's for: someone who clamps onto thick poles or rails. Who should skip it: anyone who wants a warranty in writing.
Its Office Score of 9.6/10 comes from performance 30/35, build 21/25, value 21/25, safety 8/10 and warranty 0/5: 80 of 100 points, placed on our 9.2 to 9.8 scale.
Key Specifications
| Clamp jaw | 0.866 to 3.43 in |
|---|---|
| Capacity | Up to 3.3 lbs |
| Clip stretch | 5.12 in |
| Mounts | 17mm ball, 1/4-20, cold shoe |
Figures as published on the retailer listing, collected 11 November 2026. Performance figures are manufacturer rated.
Safety and Warranty
What this listing states. Rubber-padded jaws stated as non-slip, shockproof and scratch-resistant, so safety scores 8 of 10. No warranty term, so warranty scores zero. See How We Pick.
Protect your hearing. Keep volume moderate during long calls, take breaks, and treat noise cancelling and battery figures as the maker's claims.
This is general buying information, not professional advice. Follow each product manual and local rules, and see our Safety Disclaimer.

JCWINY Dual Ballhead
A dual ball-head holder with 360-degree rotation that clamps poles from 0.4 to 1.2 in with no tools.
Pros
- Dual ball-head gives 360-degree rotation for precise positioning
- Pole fit from 0.4 to 1.2 in is wider than the Sunmig and PH01 clamps
- O-Style Buckle Locking is stated to hold the phone without drifting down
- No tools are required, and the box lists a clamp mount, a phone clip and a thin gasket
Cons
- No warranty term is stated; the spec table reads N/a.
- No phone size range is stated in inches
- No gooseneck length is stated, unlike the PH01
- No load capacity is stated for the ball heads or the clamp
Detailed Review
JCWINY lists this holder as a dual ball-head phone mount for mic stands, music stands, drum stands, ring light stands, booms, speaker stands, light stands and tripods, fitting 0.4 to 1.2 in poles. The dual ball-head rotates 360 degrees for positioning, and the O-Style Buckle Locking is stated to hold the phone so it does not drift down when touched. The holder is stated to fit nearly all smartphones with or without a case, and the box holds a clamp mount, a phone clip and a thin gasket. The spec table states no warranty, reading N/a.
Who it's for: someone who sets the phone angle with two ball heads. Who should skip it: anyone who wants a warranty.
Its Office Score of 9.6/10 comes from performance 29/35, build 20/25, value 21/25, safety 7/10 and warranty 0/5: 77 of 100 points, placed on our 9.2 to 9.8 scale.
Key Specifications
| Pole fit | 0.4 to 1.2 in |
|---|---|
| Rotation | Dual ball-head, 360 degrees |
| Lock | O-Style Buckle Locking |
| Install | No tools required |
Figures as published on the retailer listing, collected 11 November 2026. Performance figures are manufacturer rated.
Safety and Warranty
What this listing states. O-Style Buckle Locking stated to give strong clamp force, so safety scores 7 of 10. No warranty term, so warranty scores zero. See How We Pick.
Protect your hearing. Keep volume moderate during long calls, take breaks, and treat noise cancelling and battery figures as the maker's claims.
This is general buying information, not professional advice. Follow each product manual and local rules, and see our Safety Disclaimer.
As an Amazon Associate I earn from qualifying purchases.
More picks to compare
JCWINY MagSafe Mic Stand Phone HolderMagSafe mount with a 7 in gooseneck for iPhone 12, 13, 14 and 15Check on Amazon
Crescendo CR-30 SlimClipClip for poles 1/8 in to 1-1/2 in, phones up to 3-7/8 in wideCheck on Amazon
FPN Mic Stand Phone Holder7.9 in gooseneck bends to any angle, poles 0.47 to 1.8 inCheck on Amazon
elitehood Swivel Tilt Phone HolderMetal clamp for poles 0.45 to 1.5 in, 180-degree tilt, 360-degree rotationCheck on Amazon
Accessory Basics Mic Stand MountTwist-to-lock clamp for phones up to 3.75 in wide, 360-degree swivelCheck on Amazon
Specs compared
| Microphone stand | Office Score | Phone fit | Pole fit | Adjustment | Warranty | Amazon |
|---|---|---|---|---|---|---|
| GUITTO GMS-04 | 9.8/10 | Phones and tablets to 10 in | Floor stand, built-in holder | Boom arm, height to 70 in | 1-year manufacturer | View on Amazon |
| Sunmig Phone Holder | 9.7/10 | Phones 4.7 to 7 in | Poles 0.4 to 1.1 in | Tool-free clamp | 1 Year Manufacturer | View on Amazon |
| JCWINY PH01 | 9.6/10 | Nearly all smartphones | Poles 0.4 to 1.1 in | 12cm gooseneck | 90 days | View on Amazon |
| ZMHH ZM09 | 9.6/10 | Clip stretches 5.12 in | Jaw 0.866 to 3.43 in | 2-stage arms, three ball joints | Not stated | View on Amazon |
| JCWINY Dual Ballhead | 9.6/10 | Nearly all smartphones | Poles 0.4 to 1.2 in | Dual ball-head, 360 degrees | Not stated | View on Amazon |
All numbers are the manufacturer’s stated specs, not measured in an office, pulled on 11 November 2026.
How to choose the best microphone and stand with phone mount
Start with the pole or the floor
The GUITTO GMS-04 is the only complete stand here: a floor stand with a built-in phone and tablet holder, a boom arm and a height that runs up to 70 in. The other picks clamp onto a stand already in the room: the Sunmig and JCWINY PH01 fit 0.4 to 1.1 in poles, the JCWINY Dual Ballhead fits 0.4 to 1.2 in, and the ZMHH super clamp jaw fits 0.866 in to 3.43 in surfaces. Measure the pole first: a clamp too narrow cannot hold. A headset stand holds the headset while the mic stand is in use.
Match the phone fit to the phone
Phone fit is the next number to check, and the listings state it in different ways. The Sunmig states 4.7 to 7 in screens, the GUITTO takes phones and tablets up to 10 in, and the ZMHH clip stretches to 5.12 in. The two JCWINY holders state no inch range, claiming a fit for nearly all smartphones with or without cases. With a thick case, check the clip stretch or stated screen range before ordering.
Adjustment decides the viewing angle
The mount is only useful if the phone ends up at a readable angle. The JCWINY PH01 bends on a 12cm gooseneck, the JCWINY Dual Ballhead turns on two ball heads with 360-degree rotation, and the ZMHH turns on two-stage arms and three ball joints. The GUITTO moves on a boom arm with height to 70 in, and the Sunmig states no angle adjustment, so its viewing angle comes from the stand. Pick the adjustment for the room: a gooseneck bends by hand, ball heads lock in place, and a boom arm moves the microphone with the phone.
Read the warranty line, not the headline
Three listings state a warranty term. The GUITTO states a 1-year manufacturer warranty, the Sunmig states 1 Year Manufacturer, and the JCWINY PH01 states 90 days. The ZMHH states no warranty term, and the JCWINY Dual Ballhead reads N/a. A clamp, a gooseneck and a ball head are the parts that loosen first, so a term that covers parts is worth more than a vague promise. Run the charging cable along the stand, clear of the boom hinge; a cable management clip keeps it from snagging.
Setup Notes
- Measure the stand pole first: the clamps fit 0.4 to 1.1 in, 0.4 to 1.2 in or 0.866 in to 3.43 in.
- Check the phone against the stated fit: 4.7 to 7 in on the Sunmig, 5.12 in on the ZMHH, or phones and tablets to 10 in on the GUITTO.
- Set the GUITTO where the boom arm can rise to 70 in.
- Route the charging cable along the stand so it does not pull the phone.
- The JCWINY Dual Ballhead and the Sunmig need no tools; the GUITTO lists quick assembly and disassembly.
FAQ
Can a phone holder clamp fit any mic stand pole?
No. The Sunmig and JCWINY PH01 fit 0.4 to 1.1 in poles, the JCWINY Dual Ballhead fits 0.4 to 1.2 in, and the ZMHH jaw fits 0.866 to 3.43 in.
Which pick holds a tablet as well as a phone?
The GUITTO GMS-04. Its built-in holder takes phones and tablets up to 10 in.
Do any of these include the microphone stand itself?
Only the GUITTO GMS-04, a floor stand with a boom arm and a heavy-duty base. The rest are phone holders that clamp onto a mic stand, a music stand or a similar pole.
Which mounts state a warranty?
Three of them: the GUITTO at 1-year, the Sunmig at 1 Year Manufacturer, and the JCWINY PH01 at 90 days. The ZMHH and the JCWINY Dual Ballhead state no warranty term.
What keeps the phone from slipping?
The GUITTO base is heavy-duty, the Sunmig has anti-slip rubber padding, the ZMHH has rubber-padded jaws, and both JCWINY holders use an O-Style Buckle Lock.
Score breakdown
The Office Score weighs performance (phone fit, adjustment and clamp hold), build (materials and clamp design), value, safety and warranty. For this product type, safety means a stated clamp hold, anti-slip padding or a base that keeps the stand upright. Three listings state a warranty term: GUITTO at 1-year, Sunmig at 1 Year Manufacturer and JCWINY PH01 at 90 days. How we pick explains the weights.
| Product | Office Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| GUITTO GMS-04 | 9.8 | 32 | 22 | 21 | 8 | 4 |
| Sunmig Phone Holder | 9.7 | 29 | 21 | 21 | 7 | 4 |
| JCWINY PH01 | 9.6 | 28 | 20 | 20 | 7 | 3 |
| ZMHH ZM09 | 9.6 | 30 | 21 | 21 | 8 | 0 |
| JCWINY Dual Ballhead | 9.6 | 29 | 20 | 21 | 7 | 0 |
We fit point totals onto a 9.2 low and 9.8 high in a straight line. One item can outscore another only by earning more points.
More for your workspace
See every headset guide and all audio, power and connectivity guides. Also see our best headset stand for gaming desk. Also see our best headset for mic quality. Also see our best computer speakers with headphone jack. Also see our best desk pad for remote workers.
More picks: small power strip, rustic desk organizer, label maker for spice jars.





