The best tablet stand for musicians holds the tablet at eye level through a full practice session, since a stand that slips or sits too low turns sheet music into a distraction. We compared mic-stand mounts and floor tripods by tablet fit, height, tilt, clamp size and warranty, using only what each listing publishes.
OfficeKitHQ earns a commission when you buy through links on this page, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Affiliate disclosure.
Quick picks
Best Overall elitehood FT3 Tripod: 65 in tripod, 4.7 to 15.6 in fit, 360 degree rotation, 18-month warranty Check price on Amazon
Best Lifetime Warranty Tackform MS100-TAB: Anti-slip ball joint mount with a lifetime warranty Check price on Amazon
Best Mic-Stand Mount elitehood EM3 Mount: Aluminum mount for 4.7 to 13 in tablets, posts 0.45 to 1.5 in Check price on Amazon
Best Wide Fit PLDHPRO DC04-P5: Fits 5.5 to 14.6 in tablets with three 360-degree joints Check price on Amazon
Best with Remote Lamicall FT02 Tripod: Tripod with Bluetooth remote, 16.7 to 65 in height, folds to 24 in Check price on Amazon
Our desk picks
| # | Product | Office Score | Buy |
|---|---|---|---|
| 1 | elitehood FT3 Tripod | 9.7/10 | Buy on Amazon |
| 2 | Tackform MS100-TAB | 9.7/10 | Buy on Amazon |
| 3 | elitehood EM3 Mount | 9.7/10 | Buy on Amazon |
| 4 | PLDHPRO DC04-P5 | 9.6/10 | Buy on Amazon |
| 5 | Lamicall FT02 Tripod | 9.6/10 | Buy on Amazon |

elitehood FT3 Tripod
A 65 in aluminum floor tripod with a weighted base, 360 degree rotation and 135 degree tilt for tablets from 4.7 to 15.6 in.
Pros
- Extends from 17 to 65 in for standing or seated playing
- 360 degree rotation and 135 degree tilt with no knobs
- Four-spring metal brackets grip the tablet from two sides
- Weighted tripod base and 5/8 in thread for extra accessories
Cons
- Takes floor space that a mic-stand mount does not need
- Tablet fit tops out at 15.6 in, so larger tablets do not fit
- The weighted base makes it the bulkiest pick to move between rooms
- Flip locks must be opened to extend each section
Detailed Review
elitehood lists a 65 in aluminum floor tripod with weighted base, four-spring metal brackets gripping from two sides, and 360 degree rotation with 135 degree tilt without knobs. It extends 17 to 65 in, fits 4.7 to 15.6 inches, and carries a 5/8 in thread. The maker gives two fit ranges, 4.7 to 13 inches and 4.7 to 15.6 inches; check before ordering. Warranty stated: 18-month.
Who it's for: musicians who want a tall floor stand for sheet music at standing height. Who should skip it: anyone who wants a mount that clamps to a mic stand they already own.
Its Office Score of 9.7/10 comes from performance 32/35, build 22/25, value 21/25, safety 8/10 and warranty 3/5: 86 of 100 points, placed on our 9.2 to 9.8 scale.
Key Specifications
| Height | 17 to 65 in |
|---|---|
| Tablet fit | 4.7 to 15.6 in |
| Rotation | 360 degrees, 135 degree tilt |
| Material | Aluminum alloy, stainless steel |
These specs mirror the retailer listing as of 21 November 2026; performance figures are stated by the brand.
Safety and Warranty
What this listing states. Weighted tripod base and four-spring metal brackets are stated, so safety scores 8 of 10. 18-month warranty. It does not say everything a buyer needs, such as who pays return shipping, so warranty scores 3 of 5. See How We Pick.
Match the mount. Check your screen's VESA pattern, size and weight against the stated range, and check that your desk thickness and edge suit a clamp or grommet mount before you drill or clamp.
This is general buying information, not professional advice. Follow each product manual and local rules, and see our Safety Disclaimer.

Tackform MS100-TAB
A lightweight composite tablet cradle with an anti-slip metal ball and socket joint for mic stands with a 5/8"-27 thread.
Pros
- Lifetime warranty is stated
- All-metal ball and socket joint with an anti-slip hold
- Composite cradle adds little weight to the end of a mic stand
- Industry standard 5/8"-27 thread fits standard mic stands
Cons
- Does not fit the Galaxy View
- Needs a mic stand with a 5/8"-27 thread, or it will not fit
- Composite cradle, not aluminum, for buyers who want an all-metal mount
- Holds one tablet at a time; a second device needs a second mount
Detailed Review
Tackform lists a lightweight composite cradle with all-metal ball and socket joint and anti-slip hold. It fits iPad mini to iPad Pro and Samsung Galaxy devices, not the Galaxy View, and mounts by 5/8"-27 female thread. Warranty stated: lifetime.
Who it's for: performers who want a light cradle on a standard mic stand. Who should skip it: anyone whose mic stand does not use a 5/8"-27 thread.
Its Office Score of 9.7/10 comes from performance 29/35, build 21/25, value 20/25, safety 8/10 and warranty 4/5: 82 of 100 points, placed on our 9.2 to 9.8 scale.
Key Specifications
| Mount | 5/8"-27 female thread |
|---|---|
| Tablet fit | iPad mini to iPad Pro |
| Connection | Anti-slip ball and socket |
| Material | Composite cradle, metal joint |
These specs mirror the retailer listing as of 21 November 2026; performance figures are stated by the brand.
Safety and Warranty
What this listing states. Anti-slip metal ball and socket joint is stated, so safety scores 8 of 10. Lifetime Warranty. It does not say everything a buyer needs, such as who pays return shipping, so warranty scores 4 of 5. See How We Pick.
Match the mount. Check your screen's VESA pattern, size and weight against the stated range, and check that your desk thickness and edge suit a clamp or grommet mount before you drill or clamp.
This is general buying information, not professional advice. Follow each product manual and local rules, and see our Safety Disclaimer.

elitehood EM3 Mount
An aluminum mic-stand mount with 360 degree swivel and tilt from -45 to 90 degrees for tablets from 4.7 to 13 in.
Pros
- Aluminum build, not plastic, for a mic-stand mount
- Fits posts from 0.45 to 1.5 in, including mic, boom, music and cymbal stands
- Switches between portrait and landscape with a built-in hinge
- No tools are needed to install, and it fits in a small backpack
Cons
- Tripod stand is not included
- Fits tablets up to 13 in, so larger tablets do not fit
- Adds 1.0 lb to the end of a mic stand
- One mount holds one tablet; a phone needs a separate holder
Detailed Review
elitehood lists an aluminum mic-stand mount for 4.7 to 13 inches with or without cases, including iPad Pro 13 and 12.9, iPad Air and Samsung Galaxy. It clamps to posts 0.45 to 1.5 in; the hinge switches portrait and landscape, tilt -45 to 90 degrees. No tools needed; tripod stand not included. Warranty stated: 1 year.
Who it's for: musicians who want a metal tablet mount on a mic stand they already own. Who should skip it: anyone who wants a free-standing floor tripod.
Its Office Score of 9.7/10 comes from performance 30/35, build 21/25, value 21/25, safety 7/10 and warranty 3/5: 82 of 100 points, placed on our 9.2 to 9.8 scale.
Key Specifications
| Tablet fit | 4.7 to 13 in |
|---|---|
| Post size | 0.45 to 1.5 in |
| Tilt | -45 to 90 degrees |
| Weight | 1.0 lb |
These specs mirror the retailer listing as of 21 November 2026; performance figures are stated by the brand.
Safety and Warranty
What this listing states. Heavy-duty aluminum mount clamps posts from 0.45 to 1.5 in, so safety scores 7 of 10. 1 year. It does not say everything a buyer needs, such as who pays return shipping, so warranty scores 3 of 5. See How We Pick.
Match the mount. Check your screen's VESA pattern, size and weight against the stated range, and check that your desk thickness and edge suit a clamp or grommet mount before you drill or clamp.
This is general buying information, not professional advice. Follow each product manual and local rules, and see our Safety Disclaimer.

PLDHPRO DC04-P5
An ABS plastic mic-stand holder with a 3.74 in arm and three 360-degree joints for devices from 5.5 to 14.6 in.
Pros
- Widest tablet fit here at 5.5 to 14.6 in
- Three 360-degree joints and a 3.74 in arm for angle adjustment
- Snaps together or apart in seconds with no tools needed
- Fits mic stands, booms, music stands, cymbal stands and poles from 0.78 to 1.6 in
Cons
- ABS plastic, not aluminum, for buyers who want a metal mount
- Devices under 7.9 in stick to vertical mode
- Three joints mean three points to tighten before playing
- No floor-standing option; it needs a pole or stand
Detailed Review
PLDHPRO lists a mic-stand holder for 5.5 to 14.6 inches, including iPad Pro, Air and Mini, Galaxy Tab and Surface Pro. Devices under 7.9 inches stick to vertical mode. A 3.74 in arm with three 360-degree joints sets the angle; the clamp fits poles 0.78 to 1.6 in. ABS plastic, snaps together with no tools. Warranty stated: 12 month.
Who it's for: musicians who want the widest tablet fit on a mic stand. Who should skip it: anyone who wants an aluminum mount or a floor tripod.
Its Office Score of 9.6/10 comes from performance 29/35, build 19/25, value 20/25, safety 7/10 and warranty 3/5: 78 of 100 points, placed on our 9.2 to 9.8 scale.
Key Specifications
| Tablet fit | 5.5 to 14.6 in |
|---|---|
| Arm | 3.74 in, three 360-degree joints |
| Pole size | 0.78 to 1.6 in |
| Material | ABS plastic |
These specs mirror the retailer listing as of 21 November 2026; performance figures are stated by the brand.
Safety and Warranty
What this listing states. Clamp mounts mic stands, booms and poles from 0.78 to 1.6 in, so safety scores 7 of 10. 12 months. It does not say everything a buyer needs, such as who pays return shipping, so warranty scores 3 of 5. See How We Pick.
Match the mount. Check your screen's VESA pattern, size and weight against the stated range, and check that your desk thickness and edge suit a clamp or grommet mount before you drill or clamp.
This is general buying information, not professional advice. Follow each product manual and local rules, and see our Safety Disclaimer.

Lamicall FT02 Tripod
A 64.9 in aluminum floor tripod with a Bluetooth remote, four height levels and 360 degree rotation for tablets from 4 to 13 in.
Pros
- Four height levels from 16.7 to 65 in for sitting or standing
- Bluetooth remote is included for hands-free control
- Folds to 24 in and weighs 0.75 kg for carrying
- 360 degree rotation adjusts with one hand
Cons
- No warranty term is stated
- Fits tablets up to 13 in, so larger tablets do not fit
- Device width is limited to 5.6 to 8.6 in
- Tripod legs need floor space a mic-stand mount does not
Detailed Review
Lamicall lists a floor tripod with four levels from 16.7 to 65 inches, aluminum pole and tripod, and one-hand 360 degree rotation. It fits 4 to 13 inches, width 5.6 to 8.6 inches, with Bluetooth remote and storage bag. Folded: 24 inches, 0.75 kg. No warranty term stated.
Who it's for: musicians who want a tall floor stand with a remote for practice or streaming. Who should skip it: anyone who wants a stated warranty or a mic-stand mount.
Its Office Score of 9.6/10 comes from performance 32/35, build 21/25, value 21/25, safety 7/10 and warranty 0/5: 81 of 100 points, placed on our 9.2 to 9.8 scale.
Key Specifications
| Height | 16.7 to 65 in |
|---|---|
| Tablet fit | 4 to 13 in |
| Folded length | 24 in |
| Weight | 0.75 kg |
These specs mirror the retailer listing as of 21 November 2026; performance figures are stated by the brand.
Safety and Warranty
What this listing states. Stable aluminum tripod with a solid main pole is stated, so safety scores 7 of 10. No warranty term, so warranty scores zero. See How We Pick.
Match the mount. Check your screen's VESA pattern, size and weight against the stated range, and check that your desk thickness and edge suit a clamp or grommet mount before you drill or clamp.
This is general buying information, not professional advice. Follow each product manual and local rules, and see our Safety Disclaimer.
As an Amazon Associate I earn from qualifying purchases.
More picks to compare
Weilisi GTD01 TripodTall floor tripod with a bendable gooseneck for watching, streaming and recording.Check on Amazon
Aureday 67 in TripodFloor stand with a gooseneck and remote for reading sheet music and watching videos.Check on Amazon
Amazon Basics SIP105Mic-stand mount for 7 to 11 in tablets with 360-degree swivel.Check on Amazon
Mippko MK58 ArmMic-stand arm with a 10-inch reach for tablets up to 12.9 inches.Check on Amazon
elitehood EH-6 TripodTripod with two holders for a tablet and a phone, for music and reading.Check on Amazon
Specs compared
| Stand | Office Score | Tablet fit | Height | Tilt / rotation | Mount | Warranty | Amazon |
|---|---|---|---|---|---|---|---|
| elitehood FT3 Tripod | 9.7/10 | 4.7 to 15.6 in | 17 to 65 in | 360 degrees, 135 degree tilt | Floor tripod | 18 months | View on Amazon |
| Tackform MS100-TAB | 9.7/10 | iPad mini to iPad Pro | Not stated | Ball and socket | 5/8″-27 thread | Lifetime | View on Amazon |
| elitehood EM3 Mount | 9.7/10 | 4.7 to 13 in | Not stated | 360 degrees, -45 to 90 degrees | Posts 0.45 to 1.5 in | 1 year | View on Amazon |
| PLDHPRO DC04-P5 | 9.6/10 | 5.5 to 14.6 in | Not stated | Three 360-degree joints | Poles 0.78 to 1.6 in | 12 months | View on Amazon |
| Lamicall FT02 Tripod | 9.6/10 | 4 to 13 in | 16.7 to 65 in | 360 degrees | Floor tripod | Not stated | View on Amazon |
All numbers are the manufacturer’s stated specs, not measured in an office, pulled on 21 November 2026. Four of the five state a warranty term; one states none.
How to choose the best tablet stand for musicians
Mic-stand mount or floor tripod
Start with where the stand lives. The elitehood mount, PLDHPRO and Tackform clamp to a stand you own, travel light and leave the floor clear. The elitehood tripod and Lamicall stand on their own legs for a player with no mic stand. The elitehood mount notes the tripod stand is not included. For desk reading, see our tablet stand for iPad picks.
Tablet fit and case thickness
Tablet fit decides whether a stand works at all. The PLDHPRO fits 5.5 to 14.6 in, the elitehood tripod 4.7 to 15.6 in, the elitehood mount 4.7 to 13 in with or without cases, and the Lamicall 4 to 13 in with device width 5.6 to 8.6 in. The Tackform fits iPad mini to iPad Pro and Samsung Galaxy devices, not the Galaxy View. Measure with the case on, width as well as diagonal. Devices under 7.9 in stick to vertical mode on the PLDHPRO.
Height, tilt and rotation
Height and tilt set eye level. The elitehood tripod extends 17 to 65 in with 360 degree rotation and 135 degree tilt; the Lamicall adjusts 16.7 to 65 in across four levels with 360 degree rotation. The elitehood mount swivels 360 degrees, tilts -45 to 90 degrees; the PLDHPRO adds a 3.74 in arm with three 360-degree joints; the Tackform uses an all-metal ball and socket joint. Players who switch between sitting and standing want the tallest range.
| Stand | Height range | Tablet fit | Mount |
|---|---|---|---|
| elitehood FT3 Tripod | 17 to 65 in | 4.7 to 15.6 in | Floor tripod |
| Tackform MS100-TAB | Not stated | iPad mini to iPad Pro | 5/8″-27 thread |
| elitehood EM3 Mount | Not stated | 4.7 to 13 in | Posts 0.45 to 1.5 in |
| PLDHPRO DC04-P5 | Not stated | 5.5 to 14.6 in | Poles 0.78 to 1.6 in |
| Lamicall FT02 Tripod | 16.7 to 65 in | 4 to 13 in | Floor tripod |
Figures as stated. A mount takes its height from the mic stand it clamps to.
What is in the box
Extras affect setup speed. The elitehood mount and PLDHPRO need no tools; the PLDHPRO snaps together or apart in seconds. The elitehood tripod unfolds by unscrewing a knob and carries a 5/8 in thread for accessories. The Lamicall includes a Bluetooth remote and storage bag and folds to 24 in. For a live set, see our condenser microphone for live performance picks and our mechanical keyboard for music production picks.
Setup Notes
- Measure the post first: elitehood mount 0.45 to 1.5 in, PLDHPRO 0.78 to 1.6 in, Tackform 5/8″-27 thread.
- Check fit with the case on: elitehood mount 4.7 to 13 in with or without cases; Lamicall devices 5.6 to 8.6 in wide.
- Plan floor space: elitehood tripod 17 to 65 in, Lamicall 16.7 to 65 in; both fold for carrying.
- Keep the Lamicall Bluetooth remote in its storage bag with the folded stand.
- No tools for the elitehood mount or PLDHPRO; the elitehood tripod opens with a flip lock.
FAQ
What size tablet fits these stands?
PLDHPRO 5.5 to 14.6 in; elitehood tripod 4.7 to 15.6 in; elitehood mount 4.7 to 13 in; Lamicall 4 to 13 in, width 5.6 to 8.6 in. Tackform fits iPad mini to iPad Pro and Samsung Galaxy, not Galaxy View.
Do these stands attach to any mic stand?
No. Elitehood mount posts 0.45 to 1.5 in; PLDHPRO poles 0.78 to 1.6 in; Tackform needs a 5/8″-27 thread. Both tripods stand on the floor.
Which stand reaches the tallest height?
Both tripods reach 65 in: elitehood 17 to 65 in, Lamicall 16.7 to 65 in. Mounts take height from the mic stand.
Which stand includes a remote?
The Lamicall includes a Bluetooth remote and a storage bag. The other four stands list no remote.
Do any of these stands need tools to set up?
The elitehood mount and PLDHPRO need no tools; the PLDHPRO snaps together in seconds. The elitehood tripod unfolds by unscrewing a knob; the Tackform screws onto a thread.
Which stand has the longest warranty?
Tackform: lifetime. Elitehood tripod: 18 months. Elitehood mount: 1 year. PLDHPRO: 12 months. Lamicall: no term stated.
Score breakdown
The Office Score weighs performance (fit, height, tilt and clamp), build, value, safety and warranty. For a tablet stand, safety means a secure clamp and stable base, which each pick states. Four state a warranty: Tackform lifetime, elitehood tripod 18 months, elitehood mount 1 year and PLDHPRO 12 months. How we pick explains the weights.
| Product | Office Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| elitehood FT3 Tripod | 9.7 | 32 | 22 | 21 | 8 | 3 |
| Tackform MS100-TAB | 9.7 | 29 | 21 | 20 | 8 | 4 |
| elitehood EM3 Mount | 9.7 | 30 | 21 | 21 | 7 | 3 |
| PLDHPRO DC04-P5 | 9.6 | 29 | 19 | 20 | 7 | 3 |
| Lamicall FT02 Tripod | 9.6 | 32 | 21 | 21 | 7 | 0 |
We fit point totals onto a 9.2 low and 9.8 high in a straight line. One item can outscore another only by earning more points.
More for your workspace
See every monitor arm and stand guide and all monitor mounts, keyboards and mice guides.
More picks: tablet stands for iPad, tablet stands for bed, phone stands for recording, and monitor arms and stands.





