Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›

Home office gear, compared spec by spec.

Amazon Black Friday Week deals
Monitor Mounts, Keyboards and Mice

Bluetooth Headset Repair: Common Fixes

Most Bluetooth headset faults come down to a worn eartip, a flattened earpad or a cracked ear hook, and each one swaps out without replacing the headset.

Bluetooth Headset Repair: Common Fixes

The call starts and the other side hears an echo, or the earbud slips out mid-sentence and the headset dangles from its hook. Before ordering a whole new headset, look at the part that wore out. Bluetooth headset repair usually means swapping a worn eartip, earpad, mic foam or ear hook, and replacement parts for those jobs are sold on their own for the headsets people actually wear at a desk.

OfficeKitHQ earns a commission when you buy through links on this page, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Affiliate disclosure.

The quick answer

Work out which part failed, then replace that part. A loose or torn eartip, a flattened earpad, a frayed mic foam cover or a cracked ear hook each has a replacement kit made for a named headset model, and the swap is a matter of pulling the old part off and pushing the new part on. When the fault sits in the headset body, the battery or the wireless link, no spare part in these listings covers it, and that is the point to stop and weigh a replacement headset.

Bluetooth Headset Repair Step by Step

Step 1: Find the worn part

Put the headset on and run a call, then look at what moved, slipped or sounded wrong. An eartip that no longer seals lets outside sound in and lets the bud slide, while an earpad that has gone flat leaves the ear pressed against hard plastic. A mic foam cover that has torn or gone missing makes the voice sound thin on the other end, and an ear hook that has cracked lets the whole headset swing. Match the symptom to the part before ordering anything, and check the model name printed on the headset against the listing, since every kit here fits named models only.

Step 2: Swap the eartips

Eartips wear out, and the listings treat them as a consumable. Wiki VALLEY sells a kit of 3 medium silicone eartips with 3 foam covers for the Plantronics Voyager 5200, 5220 and 5210, with a 24 month warranty stated in the listing. WirelessFinest sells the same fit in 3 sizes, small, medium and mixed, each as 3 replacement tips with foam cushions, and the listing calls the swap an easy 2 step replacement. Yealink sells 3 PCS eartips in size S for its BH71 headset, with a 2 year manufacturer warranty stated. D & K Exclusives sells 8 medium silicone tips sized 12 mm by 14 mm by 26 mm, with an inner hole that stretches from 7 mm to 13 mm, and the listing states support within 24 hours.

To swap one, pull the old tip straight off the bud, line the new tip up with the bud and push it on until it sits snug. Try the fit on a call before the workday starts: a tip that seals keeps the bud in place and keeps outside sound out, while a tip that slips needs the next size up or down. Mixed-size kits exist for exactly this reason, since the size that fits varies from ear to ear.

Step 3: Swap the earpads

On-ear headsets wear at the earpad, and the pad is a separate part. YunYiYi sells 1 pair of earpads with 1 pair of mic foam covers for the BlueParrott B450-XT and B550-XT, made of memory foam, and the listing states the pads are not compatible with the B245-XT, B250-XT and B350-XT. Blucalm sells 3 earpad cushions in 3 fabrics, protein leather, breathable mesh and ice silk, with 3 mic foam covers and 1 installation kit, for the BlueParrott B450-XT, B550-XT and B650-XT, with a 1 year warranty stated. The listing also states a detailed replacement guide and a demonstration video on the product page.

To swap a pad, peel the old pad off the earcup, line the new pad up with the cup and press it into place, then do the same for the mic foam cover. Check that the pad sits flat all round the cup before wearing the headset, since a pad that rides up on one side lets sound leak and leaves the ear against the cup edge. When the listing offers a choice of fabric, pick the one that suits the room: protein leather for wear, mesh for long calls, ice silk for a cool feel, all 3 stated in the Blucalm listing.

Step 4: Swap the ear hook

An ear hook that has cracked or gone soft will not hold the headset, and the hook is a separate part too. D & K Exclusives sells a 6 pack of replacement ear hooks with an 8 mm clamp, made of flexible TPU, and the listing states the hooks loop around the ear to keep the headset adjusted. The listing also states the hooks are not compatible with the Glazata Bluetooth headset, so check the model before ordering. To swap one, unhook the old hook from the headset body, clip the new hook on and loop it around the ear, then adjust it until the bud sits in place through a call.

Step 5: When a swap is not enough

Some faults sit past the replaceable parts. A headset that will not charge, will not pair, or cuts out mid-call has a fault in the body, and no eartip, earpad or hook kit in these listings covers it. Check the warranty first: the Wiki VALLEY kit states a 24 month warranty, the Blucalm cushions (on Amazon) state a 1 year warranty, and the Yealink eartips (on Amazon) state a 2 year manufacturer warranty, while the D & K listings state support within 24 hours. When the headset is out of warranty and the fault is in the body, a replacement headset costs less in time than chasing the fault, and the guides linked below cover what to look for in a new one.

FAQ

Can I repair a Bluetooth headset myself?

For the parts that wear out, yes: eartips, earpads, mic foam covers and ear hooks are sold as replacement kits, and the listings describe the swap as pulling the old part off and pushing the new part on. When the fault is in the headset body, the battery or the wireless link, no spare part in these listings covers it.

How do I know which eartips fit my headset?

Match the model name on the headset to the listing. The kits here name the Plantronics Voyager 5200, 5220 and 5210, the Yealink BH71, and the BlueParrott B450-XT, B550-XT and B650-XT, with sizes in small, medium and mixed. Measure the bud against the stated size where the listing gives one, such as the D & K tips at 12 mm by 14 mm by 26 mm.

How often should eartips and earpads be replaced?

When they stop sealing, slip, or feel flat, not on a schedule. The listings sell the parts in packs of 3 or 8, so keep a spare set at the desk and swap the part when the fit goes, rather than waiting for it to tear.

Do replacement earpads change the sound?

The makers say so: YunYiYi states that its memory foam earpads improve the sound of the headset, and Blucalm states that its memory foam earpads isolate sound from the environment. A pad that sits flat seals the ear, while a pad that rides up lets sound leak, so the fit matters as much as the foam.

What if my headset model is not listed?

Do not order a kit made for a named model and hope it fits: the Blucalm listing states it will not fit any other model, and the YunYiYi listing names the models it does not fit. Search for a kit that names the model printed on the headset, or check with the maker, since a tip or pad made for one bud rarely fits another.

More for your workspace

See the best single ear Bluetooth headsets, the best Bluetooth headsets with long battery life, headset types, headset sizes, and the computer peripherals guides.