A drafting table that is too small leaves the sheet hanging off the edge, while one that is too big eats the whole spare room. Drafting table size is the work surface needed for the sheet, the board or the canvas in front of you, plus the height and tilt that let you reach it. The tables compared here run from a tabletop easel to a full-size desk with storage, and the chart below sets out each one.
OfficeKitHQ earns a commission when you buy through links on this page, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Affiliate disclosure.
The quick answer
Start with the sheet. A tabletop easel suits a single sheet on a small desk, a drawing board suits a flat layout with a straight edge, and a full table suits large sheets plus storage. The smallest surface here is the Falling in Art easel at 16 1/2 by 12 1/8 in, and the largest is the Lurinthal table (on Amazon) at 47.2 by 23.6 in. Height runs from a fixed 29.9 in on the Lurinthal table to an adjustable 31.5 to 49.5 in on the Garvee table (on Amazon), and tilt runs from flat to 80 degrees on the Lurinthal table.
Drafting table size chart
| Table | Work surface | Height | Tilt | Weight | Amazon |
|---|---|---|---|---|---|
| Falling in Art Easel | 16 1/2 by 12 1/8 in | Tabletop | 5 settings to 68 degrees | 1.9 lb | View on Amazon |
| Acurit PXB Drawing Board | 20 by 26 in | Tabletop | 7 angles up to 45 degrees | 15.43 lb | View on Amazon |
| Lurinthal Drafting Table | 47.2 by 23.6 in | 29.9 in | 0 to 80 degrees | 82.0 lb | View on Amazon |
| Garvee Drafting Table | 38.5 by 23.6 in | 31.5 to 49.5 in | 0 to 75 degrees | 56.88 lb | View on Amazon |
These are the sizes the listings state.
Step 1: Match the surface to the sheet
The work surface has to hold the sheet with room to spare. The Falling in Art easel measures 16 1/2 by 12 1/8 in and the listing states it can catch same-size papers, while the Acurit board (on Amazon) measures 20 by 26 in with a parallel motion bar for horizontal lines. The Lurinthal table measures 47.2 by 23.6 in and the Garvee table measures 38.5 by 23.6 in, so both full tables leave room beside the sheet for tools. Check the sheet size against the surface before choosing, and leave space for a ruler, a pencil ledge or a lamp.
Step 2: Check the height range
Tabletop pieces sit on a desk, so their height is the desk height. The Lurinthal table stands 29.9 in high, while the Garvee table adjusts from 31.5 to 49.5 in, and the listing states the height adapts to different work environments. A stool comes with the Garvee table, per its listing. Measure the chair and the desk height against the table height before choosing.
Step 3: Check the tilt range
Tilt changes the angle of the work surface. The Falling in Art easel offers 5 settings from flat to a 68 degree angle, the Acurit board offers 7 drawing angles up to 45 degrees, the Lurinthal table adjusts from 0 to 80 degrees and the Garvee table tilts from 0 to 75 degrees. A wider tilt range covers more kinds of work, from flat writing to angled drawing, so check the stated range against the work planned.
Step 4: Check the footprint and the weight
A full table needs floor space and stays put, while a tabletop piece moves between rooms. The Lurinthal table measures 23.6 by 47.2 by 29.9 in and weighs 82.0 lb, and the Garvee table measures 23.6 by 38.5 by 35.8 in and weighs 56.88 lb. The Acurit board measures 26.0 by 20.0 by 3.15 in and weighs 15.43 lb, with a handle for transport, and the Falling in Art easel weighs 1.9 lb with a non-slip rubber foot. Check the floor space and the weight against the room before choosing.
Drafting tables for every size
The tables below cover the size question from the smallest to the largest: each one states its work surface, height and tilt, so the size can be checked against the sheet and the room.
| # | Product | Office Score | Buy |
|---|---|---|---|
| 1 | Acurit PXB Drawing Board | 9.6/10 | Buy on Amazon |
| 2 | Garvee Drafting Table | 9.6/10 | Buy on Amazon |
| 3 | Lurinthal Drafting Table | 9.6/10 | Buy on Amazon |
| 4 | Falling in Art Easel | 9.6/10 | Buy on Amazon |

Acurit PXB Drawing Board
A 20 by 26 in portable drawing board with a parallel motion bar, 7 angles up to 45 degrees and a 17mm laminated surface.
Pros
- Parallel motion bar draws accurate horizontal lines
- 7 drawing angles up to 45 degrees
- 17mm laminated melamine surface resists scratches and dents
- Transparent ruler with inch markings and an inking edge
Cons
- Warranty is only 90 days
- Height is fixed by the desk it sits on
- 15.43 lb, the heaviest tabletop piece here
- No storage is stated
Detailed Review
Acurit lists the PXB as a 20 by 26 in drawing board with a parallel motion bar, a transparent ruler with inch markings and an inking edge, and a 17mm laminated melamine surface. The frame offers 7 drawing angles up to 45 degrees, rubber feet steady the board and a handle helps carry it between workspaces. The spec table gives a 26.0 by 20.0 by 3.15 in footprint and a 15.43 lb item weight, and the listing states a 90-day warranty.
Who it's for: someone who draws on a desk and wants a straight edge and a ruler built into the board. Who should skip it: anyone who wants a full table with legs, height adjustment or storage.
Its Office Score of 9.6/10 comes from performance 30/35, build 21/25, value 20/25, safety not scored (non-powered gear) and warranty 2/5: 73 of 90 points, placed on our 9.2 to 9.8 scale.
Key Specifications
| Work surface | 20 by 26 in |
|---|---|
| Angles | 7, up to 45 degrees |
| Surface | 17mm laminated melamine |
| Item weight | 15.43 lb |
Figures as published on the retailer listing, collected 13 November 2026. Performance figures are manufacturer rated.
Safety and Warranty
What this listing states. This product does not plug in or run on a battery, so safety is not part of its score. 90 Days. It does not say everything a buyer needs, such as who pays return shipping, so warranty scores 2 of 5. See How We Pick.
Moving desk, heavy load. Stay under the stated lift or weight capacity, leave slack in every cable, keep children, pets and fingers clear while the desk moves, and treat anti-collision as the maker's claim.
This is general buying information, not professional advice. Follow each product manual and local rules, and see our Safety Disclaimer.

Garvee Drafting Table
A height-adjustable drafting table with a stool, a tilting glass tabletop and 2 storage drawers.
Pros
- Height adjusts from 31.5 to 49.5 in
- Tabletop tilts from 0 to 75 degrees
- Glass tabletop with a powder-coated steel frame
- Stool included, with steel legs
Cons
- No warranty term is stated, only a 7-day return policy
- Work surface of 38.5 by 23.6 in is smaller than the Lurinthal table here
- Stool height is not stated
- No safety certification is stated
Detailed Review
Garvee lists this drafting table with a stool, a height adjustable from 31.5 to 49.5 in and a tabletop that tilts from 0 to 75 degrees. The top is tempered glass on a powder-coated steel frame, with 2 storage drawers, a 24-inch slide-up pencil ledge and four anti-vibration feet. The spec table gives a 38.5 by 23.6 by 35.8 in footprint and a 56.88 lb item weight, and the listing states a 7-day return policy.
Who it's for: someone who wants a full drafting table with a stool, adjustable height and tilt in one buy. Who should skip it: anyone who wants a stated warranty term or a larger work surface than 38.5 by 23.6 in.
Its Office Score of 9.6/10 comes from performance 32/35, build 21/25, value 21/25, safety not scored (non-powered gear) and warranty 0/5: 74 of 90 points, placed on our 9.2 to 9.8 scale.
Key Specifications
| Work surface | 38.5 by 23.6 in |
|---|---|
| Height | 31.5 to 49.5 in |
| Tilt | 0 to 75 degrees |
| Item weight | 56.88 lb |
Figures as published on the retailer listing, collected 13 November 2026. Performance figures are manufacturer rated.
Safety and Warranty
What this listing states. This product does not plug in or run on a battery, so safety is not part of its score. No warranty term, so warranty scores zero. See How We Pick.
Moving desk, heavy load. Stay under the stated lift or weight capacity, leave slack in every cable, keep children, pets and fingers clear while the desk moves, and treat anti-collision as the maker's claim.
This is general buying information, not professional advice. Follow each product manual and local rules, and see our Safety Disclaimer.

Lurinthal Drafting Table
A 47.2 by 23.6 in drafting table with a 0 to 80 degree tilt, three drawers, open shelves and a storage cabinet.
Pros
- Largest work surface here at 47.2 by 23.6 in
- Tabletop angle adjusts from 0 to 80 degrees
- Three drawers, 3-tier open shelves and a storage cabinet
- Premium MDF construction, per the listing
Cons
- No warranty term is stated
- Height is fixed at 29.9 in, with no adjustment stated
- 82.0 lb, the heaviest table here
- No safety certification is stated
Detailed Review
Lurinthal lists this drafting table at 47.2 by 23.6 in with a 29.9 in height and a tabletop angle adjustable from 0 to 80 degrees. Storage includes three drawers, 3-tier open shelves and a storage cabinet, and the listing states premium MDF construction with a load-bearing capacity that keeps the surface stable. The spec table gives a 23.6 by 47.2 by 29.9 in footprint and an 82.0 lb item weight.
Who it's for: someone who wants the largest surface here with drawers, shelves and a cabinet in one table. Who should skip it: anyone who needs adjustable height or a lighter table that moves between rooms.
Its Office Score of 9.6/10 comes from performance 30/35, build 21/25, value 20/25, safety not scored (non-powered gear) and warranty 0/5: 71 of 90 points, placed on our 9.2 to 9.8 scale.
Key Specifications
| Work surface | 47.2 by 23.6 in |
|---|---|
| Height | 29.9 in |
| Tilt | 0 to 80 degrees |
| Item weight | 82.0 lb |
Figures as published on the retailer listing, collected 13 November 2026. Performance figures are manufacturer rated.
Safety and Warranty
What this listing states. This product does not plug in or run on a battery, so safety is not part of its score. No warranty term, so warranty scores zero. See How We Pick.
Moving desk, heavy load. Stay under the stated lift or weight capacity, leave slack in every cable, keep children, pets and fingers clear while the desk moves, and treat anti-collision as the maker's claim.
This is general buying information, not professional advice. Follow each product manual and local rules, and see our Safety Disclaimer.

Falling in Art Easel
A beech wood tabletop easel measuring 16 1/2 by 12 1/8 in, with 5 angle settings and a non-slip rubber foot.
Pros
- Lightest piece here at 1.9 lb
- 5 settings from flat to a 68 degree angle
- European beech wood construction
- Non-slip rubber foot steadies the base
Cons
- Smallest work surface here at 16 1/2 by 12 1/8 in
- No warranty term is stated
- No safety certification is stated
Detailed Review
Falling in Art lists this tabletop easel in European beech wood, measuring 16 1/2 by 12 1/8 in with 5 settings from flat to a 68 angle and a non-slip rubber foot. The listing states it weighs 1.9 lb and suits drawing and sketching on same-size papers. One contradiction needs noting: the spec table lists product dimensions that do not match the 12 1/8 in width in the title, so the title and bullets are the reliable source here.
Who it's for: someone who wants a light tabletop easel for small sheets on a desk. Who should skip it: anyone who needs a larger surface, a drawing board with a straight edge or a full table.
Its Office Score of 9.6/10 comes from performance 28/35, build 20/25, value 20/25, safety not scored (non-powered gear) and warranty 0/5: 68 of 90 points, placed on our 9.2 to 9.8 scale.
Key Specifications
| Work surface | 16 1/2 by 12 1/8 in |
|---|---|
| Angles | 5 settings to 68 degrees |
| Material | European beech wood |
| Item weight | 1.9 lb |
Figures as published on the retailer listing, collected 13 November 2026. Performance figures are manufacturer rated.
Safety and Warranty
What this listing states. This product does not plug in or run on a battery, so safety is not part of its score. No warranty term, so warranty scores zero. See How We Pick.
Moving desk, heavy load. Stay under the stated lift or weight capacity, leave slack in every cable, keep children, pets and fingers clear while the desk moves, and treat anti-collision as the maker's claim.
This is general buying information, not professional advice. Follow each product manual and local rules, and see our Safety Disclaimer.
As an Amazon Associate I earn from qualifying purchases.
These are scored on the Office Score, which weighs performance 30, build 20, value 20, safety 15 and warranty 15. Safety here means stated certifications or safety features, and none of the four listings states one, so all four score 0 for safety. Only one of the four states a warranty term, the Acurit board at 90 days, so only it scores for warranty. How we pick explains the weights.
| Product | Office Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| Acurit PXB Drawing Board | 9.6 | 30 | 21 | 20 | n/a | 2 |
| Garvee Drafting Table | 9.6 | 32 | 21 | 21 | n/a | 0 |
| Lurinthal Drafting Table | 9.6 | 30 | 21 | 20 | n/a | 0 |
| Falling in Art Easel | 9.6 | 28 | 20 | 20 | n/a | 0 |
The scale opens at 9.2 and closes at 9.8; between those marks, weighted points translate linearly into the score you see. Electrical items and listings with stated safety features earn safety points. Other items are scored on the 90 points that are left.
FAQ
What size drafting table do I need?
Match the work surface to the sheet. The tables here run from a 16 1/2 by 12 1/8 in tabletop easel to a 47.2 by 23.6 in full table, so check the sheet size against the stated surface before choosing.
What is the standard size of a drafting table?
There is no single standard size in these listings. The full tables here measure 47.2 by 23.6 in and 38.5 by 23.6 in, while the tabletop pieces measure 20 by 26 in and 16 1/2 by 12 1/8 in, so the size depends on the work and the room.
How tall is a drafting table?
The Lurinthal table stands 29.9 in high, and the Garvee table adjusts from 31.5 to 49.5 in. The tabletop easel and drawing board sit on a desk, so their height is the desk height.
How much tilt does a drafting table need?
It depends on the work. The tilt ranges here run from 7 angles up to 45 degrees on the Acurit board to 0 to 80 degrees on the Lurinthal table, so check the stated range against the work planned.
More for your workspace
See the best adjustable drafting tables, the best large drafting tables, the best drafting tables for beginners and the desk mat sizes guide.









