Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›

Home office gear, compared spec by spec.

Amazon Black Friday Week deals
Office Machines and Storage

How to Use a Staple Remover

How to use a staple remover comes down to the type: slide a push-style remover under the staple wire and push, or grip a jaw-style remover around the staple and squeeze.

How to Use a Staple Remover

A stack of papers that needs re-sorting, a staple in the wrong place, a page that has to come out clean: the staple has to come out, and the remover decides whether the paper survives. How to use a staple remover comes down to the type: slide a push-style remover under the staple wire and push, or grip the staple with a jaw-style remover and pull. This guide shows the steps for each type, and the removers below that do each job.

OfficeKitHQ earns a commission when you buy through links on this page, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Affiliate disclosure.

How to use a staple remover: the quick answer

Slide a push-style remover under the staple wire and push, and the mechanism lifts the staple out without tearing the paper. Grip a jaw-style remover around the staple and squeeze, and the sharp teeth pull it out. The magnetic tip on the push-style removers picks up the loose staple after, so it does not end up on the desk.

Push-style vs jaw-style

Type How it works Removers here Amazon
Push-style Slide under the staple wire and push; the mechanism lifts the staple Bostitch 40000M, Bostitch Neon, ZZTX Magnetic
Jaw-style Grip the staple with the jaws and squeeze; sharp teeth pull it out ZZTX Jaw 3-Pack

Three of the removers here are push-style, and one is jaw-style. The push-style removers all carry a magnetic pick up, and the jaw-style remover does not state one.

Step 1: Slide under the staple

Slide the tip of the remover under the staple wire. The Bostitch Neon listing puts it plainly: slide it under the staple wire and push. Keep the paper flat on the desk while you work.

Step 2: Push or squeeze

For a push-style remover, push the handle and the mechanism lifts the staple out without tearing the paper. For the jaw-style remover, squeeze the contoured grips and the metal plated jaws with sharp teeth grip the staple and pull it out. If the staple does not move, reposition the remover rather than forcing it.

Step 3: Pick up the loose staple

The loose staple has to go somewhere, and the magnetic tip is the tool for it. The Bostitch removers and the ZZTX Magnetic remover all state a magnetic pick up for stray staples, so touch the tip to the loose staple and it lifts away. The jaw-style remover states no magnetic pick up, so pick the staple up by hand.

The staple removers

The removers below cover the steps above: the Bostitch removers and the ZZTX Magnetic remover are the push-style tools for the slide-and-push step, and the ZZTX jaw remover is the grip-and-pull tool.

Bostitch 40000M-BLK

Bostitch 40000M-BLK

Bostitch9.7/10 Office Score
i
The Office Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

One magnetic push-style remover with a staple grabber, ergonomic design and a 7-year limited warranty, per the listing bullets.

Pros

  • Magnetic pick up for easy stray staple clean up
  • Staple grabber eliminates loose staples
  • 7-year limited warranty, per the listing bullets
  • Ergonomic design, more comfortable than pinch style removers, per the listing

Cons

  • One remover, not a pack
  • No stated sheet limit
  • No color choice; black only
Detailed Review

Bostitch's 40000M is the single magnetic remover here: a push-style remover with a staple grabber and a magnetic pick up for stray staples, in black, at 0.08 lb. The listing says the ergonomic design is more comfortable than pinch style removers, and the push style lifts staples easily without tearing paper. The listing gives a release date of 2018-05-01.

The bullets state a 7-year limited warranty while the spec table states a limited lifetime warranty; the bullets are the stated term, so the warranty here is the 7-year limited one. Who it's for: a desk that needs one magnetic remover with a stated warranty. Who should skip it: anyone who wants a pack of three.

Its Office Score of 9.7/10 comes from performance 32/35, build 22/25, value 21/25, safety not scored (non-powered gear) and warranty 3/5: 78 of 90 points, placed on our 9.2 to 9.8 scale.

Key Specifications
TypePush-style, magnetic
Warranty7-year limited (bullets)
Size2.75 x 1.38 x 8.75 in
Weight0.08 lb

These specs mirror the retailer listing as of 13 November 2026; performance figures are stated by the brand.

Safety and Warranty

What this listing states. This product does not plug in or run on a battery, so safety is not part of its score. 7-year limited warranty, per the listing bullets. It does not say everything a buyer needs, such as who pays return shipping, so warranty scores 3 of 5. See How We Pick.

Follow the manual. Assemble and use the product as the maker describes, stay under any stated capacity, and read the manual before first use.

This is general buying information, not professional advice. Follow each product manual and local rules, and see our Safety Disclaimer.

Bostitch Neon 3-Pack

Bostitch Neon 3-Pack

Bostitch9.7/10 Office Score
i
The Office Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 3-pack of magnetic push-style removers in neon colors, with a grabber and magnetic tip, 8 x 2 inches per the listing.

Pros

  • Push-style mechanism: slide it under the staple wire and push, per the listing
  • Grabber and magnetic tip pick up loose staples
  • 3 pack in three neon colors
  • Ergonomic handle for a comfortable grip, per the listing

Cons

  • No warranty term is stated
  • No stated sheet limit
  • No rust resistance stated
Detailed Review

Bostitch's neon set is a 3-pack of push-style removers in three professional colors, with a grabber and a magnetic tip. The listing says to slide it under the staple wire and push, and the tool removes staples in seconds without tearing or crumpling sheets. The ergonomic handle is made for a comfortable grip.

The bullets state the remover is 8 x 2 inches while the spec table states 2.0 x 6.0 x 1.0 inches; the bullets are the stated size. No warranty term is stated. Who it's for: a home, school or office desk that needs three removers in bright colors. Who should skip it: anyone who wants a stated warranty or a sheet limit.

Its Office Score of 9.7/10 comes from performance 30/35, build 21/25, value 22/25, safety not scored (non-powered gear) and warranty 0/5: 73 of 90 points, placed on our 9.2 to 9.8 scale.

Key Specifications
TypePush-style, magnetic
Pack3, neon colors
Size8 x 2 in (bullets)

These specs mirror the retailer listing as of 13 November 2026; performance figures are stated by the brand.

Safety and Warranty

What this listing states. This product does not plug in or run on a battery, so safety is not part of its score. No warranty term, so warranty scores zero. See How We Pick.

Follow the manual. Assemble and use the product as the maker describes, stay under any stated capacity, and read the manual before first use.

This is general buying information, not professional advice. Follow each product manual and local rules, and see our Safety Disclaimer.

ZZTX Magnetic 3-Pack

ZZTX Magnetic 3-Pack

ZZTX9.6/10 Office Score
i
The Office Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 3-pack of magnetic push-style removers in blue, rose and green, with a steel cutter, 6 x 0.67 x 0.71 inches per the listing.

Pros

  • New steel cutter, will not rust, per the listing
  • Magnetic pick up for easy staple clean-up
  • Push-style mechanism lifts staples without tearing paper, per the listing
  • Removes staples fastened on up to 10 sheets, per the listing

Cons

  • No warranty term is stated
  • No grabber stated
Detailed Review

ZZTX's magnetic set is a 3-pack in blue, rose and green, with a push-style mechanism and a magnetic pick up. The listing states a new steel cutter that will not rust, an ergonomic design with a plastic Arc handle, and staples fastened on up to 10 sheets. The bullets give the size as 6 x 0.67 x 0.71 inches.

The spec table states the size as 6.93 x 6.93 x 11.06 inches, which does not match the bullets; the bullets are the stated size. The spec table size also reads 3 Count (Pack of 1) against the 3 pack title. No warranty term is stated. Who it's for: a desk that needs three magnetic removers in different colors. Who should skip it: anyone who wants a stated warranty or a grabber.

Its Office Score of 9.6/10 comes from performance 29/35, build 21/25, value 21/25, safety not scored (non-powered gear) and warranty 0/5: 71 of 90 points, placed on our 9.2 to 9.8 scale.

Key Specifications
TypePush-style, magnetic
Pack3, blue, rose, green
Size6 x 0.67 x 0.71 in (bullets)
SheetsUp to 10 sheets

These specs mirror the retailer listing as of 13 November 2026; performance figures are stated by the brand.

Safety and Warranty

What this listing states. This product does not plug in or run on a battery, so safety is not part of its score. No warranty term, so warranty scores zero. See How We Pick.

Follow the manual. Assemble and use the product as the maker describes, stay under any stated capacity, and read the manual before first use.

This is general buying information, not professional advice. Follow each product manual and local rules, and see our Safety Disclaimer.

ZZTX Jaw 3-Pack

ZZTX Jaw 3-Pack

ZZTX9.6/10 Office Score
i
The Office Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 3-pack of black jaw-style removers with metal plated jaws, sharp teeth and contoured plastic grips.

Pros

  • Jaw style with sharp teeth for stubborn staples, per the listing
  • 3 pack, black
  • Plastic grips contoured for comfortable control
  • Removes staples without ripping paper, per the listing

Cons

  • No magnetic pick up stated
  • No push-style mechanism; jaw type only
  • No dimensions stated
  • No warranty term is stated
Detailed Review

ZZTX's jaw set is a 3-pack of black jaw-style removers with shiny silver metal plated jaws and sharp teeth. The listing says the jaws get even the most stubborn staples, and the plastic grips are contoured for comfortable control. It removes staples easily without ripping paper.

No dimensions are stated, and no magnetic pick up or push-style mechanism is stated; this is the jaw type only. No warranty term is stated. Who it's for: a desk that needs three simple jaw removers. Who should skip it: anyone who wants magnetic clean-up or a push-style tool.

Its Office Score of 9.6/10 comes from performance 28/35, build 20/25, value 20/25, safety not scored (non-powered gear) and warranty 0/5: 68 of 90 points, placed on our 9.2 to 9.8 scale.

Key Specifications
TypeJaw-style
Pack3, black
JawsMetal plated, sharp teeth

These specs mirror the retailer listing as of 13 November 2026; performance figures are stated by the brand.

Safety and Warranty

What this listing states. This product does not plug in or run on a battery, so safety is not part of its score. No warranty term, so warranty scores zero. See How We Pick.

Follow the manual. Assemble and use the product as the maker describes, stay under any stated capacity, and read the manual before first use.

This is general buying information, not professional advice. Follow each product manual and local rules, and see our Safety Disclaimer.

As an Amazon Associate I earn from qualifying purchases.

How to choose a staple remover

Pick the type first

Push-style removers lift the staple with a push, and the three push-style removers here all carry a magnetic pick up. The jaw-style remover grips with teeth and states no magnetic pick up. If the desk sees a lot of staples, the magnetic pick up keeps the loose ones off the desk. For heavier staples, see the best industrial staple remover picks.

Pick the pack size

Three of the removers here come in 3-packs, and the Bostitch 40000M comes as one remover. Pick the pack that matches how many desks the removers serve.

Check the warranty and the size

Only the Bostitch 40000M states a warranty: 7 years limited, per the listing bullets, against a limited lifetime warranty in the spec table. The ZZTX Magnetic remover states a size of 6 x 0.67 x 0.71 inches and staples on up to 10 sheets, and the Bostitch Neon states 8 x 2 inches. The ZZTX jaw remover states no size. For the tool that puts the staples in, see the best electric stapler picks, and for holding papers after the staples come out, see the best binder clips.

FAQ

Can a staple remover tear the paper?

The listings say no, when the tool is used as stated: the push-style removers lift staples without tearing paper, and the jaw-style remover removes staples without ripping paper. Slide under the wire and push, or grip and squeeze, rather than yanking the staple out.

What is the difference between a push-style and a jaw-style remover?

A push-style remover slides under the staple wire and pushes, and the mechanism lifts the staple out. A jaw-style remover grips the staple with metal jaws and sharp teeth and pulls it out. Three of the removers here are push-style, and one is jaw-style.

Do staple removers pick up the loose staples?

The three push-style removers here state a magnetic pick up: the Bostitch 40000M, the Bostitch Neon and the ZZTX Magnetic remover. The jaw-style remover states no magnetic pick up.

How many sheets can a staple remover handle?

The ZZTX Magnetic listing states staples fastened on up to 10 sheets. The other listings state no sheet limit, so check the listing for the remover you hold.

What warranty do staple removers carry?

Only the Bostitch 40000M states one: a 7-year limited warranty, per the listing bullets, while the spec table states a limited lifetime warranty. The other removers state no warranty term.

Bostitch 40000M-BLK
Still deciding? Our top pickBostitch 40000M-BLK
Check price on Amazon

More for your workspace

See the best industrial staple removers, the best electric staplers, the best binder clips and the office storage hub.