Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›

Home office gear, compared spec by spec.

Amazon Black Friday Week deals
Monitor Mounts, Keyboards and Mice

How to Use Monitor Speaker: Setup and Connection Guide

How to use monitor speaker bars: clip the bar to the monitor, plug in one USB cable, pick the speaker in the sound settings and set the volume.

How to Use Monitor Speaker: Setup and Connection Guide

The desk is quiet at the start of the workday, the monitor glows, and the laptop speakers sound thin across the room. A monitor speaker bar clips to the top or bottom edge of the screen and puts the sound where the picture is, without taking desk space. How to use monitor speaker bars is simple: clip the bar on, plug in its cable, and pick the speaker in the computer sound settings.

OfficeKitHQ earns a commission when you buy through links on this page, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Affiliate disclosure.

How to use monitor speaker

A monitor speaker is a small sound bar that clips to a monitor or stands on the desk, and it takes power and sound through a USB cable. Clip it to the top or bottom edge of the monitor, or set it on the desk in front of the screen. Plug the USB cable into the computer, then open the sound settings and pick the speaker as the output device.

Check the clip against your monitor

Measure the thickness of your monitor edge before you buy a clip-on speaker, since each clip opens only so far. The Cyber Acoustics CA-2890PRO clips (on Amazon) to monitors up to 2 inches thick, the Hupoaf clip (on Amazon) supports screen thickness up to 1.6 inches, the INGA clip (on Amazon) fits monitors up to 1.5 inches thick, and the Inwa clip clamps to monitors up to 1 inch thick. The YYV clip opening measures 0.78 inches at most. A monitor with a curved back needs a different mount: the INGA listing states that its clip is not compatible with curved-back monitors. If the clip does not fit, set the speaker on the desk instead: the Hupoaf, YYV and Inwa speakers all stand on a desk as well.

Clip the speaker on or set it on the desk

Open the spring clip on the bottom of the speaker and press it over the top or bottom edge of the monitor, then let the clip close on the screen. The YYV clip opens by hand and closes on its own, and the INGA clip has silicone pads that protect the monitor. Keep the bar level so the sound faces forward: the SOULION bar uses a 30-degree slanted design that angles sound toward the listener, and the Creative Pebble (on Amazon) angles its drivers at 45°. If the bar sits on the desk, place it in front of the monitor with the drivers facing you, and leave room for the cable at the back.

Connect the USB cable

Most monitor speakers need a single USB cable for both power and sound, so plug it into a USB port on the computer itself. The Hupoaf listing advises plugging directly into the computer tower or laptop USB port rather than a monitor USB port, for the most stable connection. The Cyber Acoustics bars take USB-C or USB-A, and an adapter is included for the older port. Some bars also take a 3.5 mm cable for sound: the SOULION bar connects its USB cable for power and a 3.5 mm jack for audio, and the Creative Pebble connects through USB for power and a 3.5 mm AUX-in for sound. A bar with Bluetooth, such as the Cyber Acoustics CA-2890PRO, can also pair with a phone while it stays connected to the computer through USB. A step-by-step computer speaker setup guide covers the same cable order in more detail, and the computer speaker cable comparison covers the cable itself.

Choose the speaker in your sound settings

After the cable is in, open the sound settings on the computer and look for the speaker in the list of output devices. Pick the monitor speaker as the output, then play a short clip of music or a video and listen for sound from the bar. If the sound still comes from the laptop, check that the right output is picked and that the volume is up. The INGA listing advises checking that the sound card driver is up to date and that the proper playback device is picked in the audio settings. A bar that takes a 3.5 mm cable also needs the cable seated in the headphone jack.

Set volume, mute and lights

Most bars put the controls on top: volume up, volume down and mute. The YYV and Inwa bars have 3 buttons on top for volume up, volume down and mute, and the INGA bar has four top buttons that add power. The SOULION bar uses a rotary switch for volume and a small switch for the LED lights. Light bars cycle through colors with a button press: the Hupoaf bar offers 6 RGB modes, and the Cyber Acoustics CA-2890GX (on Amazon) offers 9 color modes. Press and hold the light button to turn the lights off, per the Hupoaf listing. For calls, the Cyber Acoustics CA-2890PRO works as a speakerphone with a mic mute button, while the YYV listing states that its speaker has no microphone function.

What to check before you buy

A monitor speaker should match the monitor and the desk. The Dell sound bar measures 15.9 by 1.5 by 1.9 inches and weighs 1.0 lb, and the Cyber Acoustics CA-2890PRO measures 2.0 by 10.0 by 3.0 inches and weighs 0.7 lb. Power output is stated in watts: the Cyber Acoustics CA-2890PRO lists 20W and the Cyber Acoustics CA-2890GX lists 10W. The YYV bar carries a 6-month warranty, the Cyber Acoustics bars, the Dell bar and the Inwa bar carry a 1 year warranty, and the INGA and Inwa bars offer lifetime technical support.

FAQ

Do monitor speakers need a power adapter?

No. The monitor speakers in this guide run on USB power alone, with no power adapter. The Cyber Acoustics bars, the Hupoaf bar, the YYV bar and the Inwa bar all take power through their USB cable. The SOULION and Creative bars also need USB power, plus a 3.5 mm cable for sound.

Can a monitor speaker clip to any monitor?

No. Each clip opens only so far, so check the thickness figure before you buy. The Cyber Acoustics CA-2890PRO clips to monitors up to 2 inches thick, the Hupoaf clip supports up to 1.6 inches, the INGA clip fits up to 1.5 inches, and the Inwa clip fits up to 1 inch thick. The INGA clip does not fit curved-back monitors.

Why is there no sound from my monitor speaker?

Check the cable, then the sound settings. Plug the USB cable directly into the computer rather than a monitor USB port, pick the speaker as the output device in the sound settings, and raise the volume. The INGA listing advises checking that the sound card driver is up to date and that the proper playback device is picked.

Can I use a monitor speaker with a phone?

Some bars can. The Cyber Acoustics CA-2890PRO connects to a phone through Bluetooth while it stays connected to the computer through USB. The YYV bar works with some Android phones that have a type-C port, with a USB-C to USB adapter in the box. A bar that needs a 3.5 mm cable can take sound from a phone with a headphone jack.

More for your workspace

See every Monitor Mounts, Keyboards and Mice guide and all Webcams and Ring Lights guides.