Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›

Home office gear, compared spec by spec.

Amazon Black Friday Week deals
Office Machines and Storage

Types of Pegboard Hooks: Styles, Sizes and Uses

Types of pegboard hooks by shape and size: straight, curved and angled hooks, L-shape hooks, bins, ring holders and racks for a pegboard wall.

Types of Pegboard Hooks: Styles, Sizes and Uses

At a home desk, the wall above the work surface is extra storage, if the hooks hold what you hang on them. Learning the types of pegboard hooks, from hooks and bins to rings and racks, keeps the wall tidy and the tools within reach, and the choice starts with the board you own. This guide walks through the hook types and the sets that carry them.

OfficeKitHQ earns a commission when you buy through links on this page, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Affiliate disclosure.

Types of pegboard hooks: the short list

Hooks differ by shape, length and what they hold. The table lines up the hook types in the sets below, with the sizes each listing states.

Hook type What it holds Stated in Amazon
Straight hook Hand tools and hanging items ELEAD 297-piece kit
Curved hook Tools that need a lip to stay put ELEAD 297-piece kit
Angled hook Items hung at an angle ELEAD 297-piece kit
L-shape hook Tools on a 1/4 inch board INCLY 60-pack
Bins Screws and small accessories SEDY 300-piece set, ELEAD 297-piece kit
Ring tool holder Ring-shaped tools ELEAD 297-piece kit
Multi-tool rack Several tools in one rack ELEAD 297-piece kit

Match the hook to the board

Check the board thickness and the hole spacing first. The SEDY, ELEAD 66-piece and ELEAD 297-piece (on Amazon) sets fit both 1/8 inch and 1/4 inch pegboards with 1 inch spacing, while the INCLY hooks fit a 1/4 inch holed pegboard with 1 inch spacing and a 0.2 inch thick diameter. A hook that is too thin for the hole wobbles, and a hook that is too thick will not seat, so match the diameter to the board before you buy.

Pick the length for the load

Hook length sets what hangs on it. The ELEAD 66-piece and INCLY sets come in 2, 4 and 6 inch lengths, and the INCLY set states 20 hooks of each size. Longer hooks hold bigger items, but they also reach further from the wall, so leave room in front of the board. The INCLY hooks state a load bearing of 30LBS, the only load figure in these listings, so check the load figure when the hook must hold a heavy tool.

Add bins, holders and locks

Hooks alone leave small parts with nowhere to go. The SEDY set includes 12 bins, and the ELEAD 297-piece kit includes 20 bins, a ring tool holder, a multi-tool rack and peg locks to keep the hooks mounted. Bins hold screws and small accessories, and locks keep the hooks from lifting off the board when you pull a tool free. See our desk organizers and whiteboards guides for more ways to sort small parts.

Pegboard hook sets for the job

The wall layout step is where the sets come in: a set with hooks, bins and locks covers the whole wall, while a hook-only set suits a board that already has bins. The picks below cover both forms, ranked by Office Score.

SEDY 300-Piece Set

SEDY 300-Piece Set

SEDY9.6/10 Office Score
i
The Office Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 300-piece set with 16 types of accessories and 12 bins in hardened steel with a chrome finish; it handles the full wall layout, from hooks to bins.

Pros

  • 300 pieces with 16 types of accessories for a full layout
  • Hardened steel hooks with a chrome-plated finish that resists rust
  • Fits both 1/8 inch and 1/4 inch pegboards with 1 inch spacing
  • 12 bins in the set for screws and small accessories

Cons

  • No warranty term is stated
  • No load figure is stated for any hook
  • No hook lengths are stated beyond the 1 inch spacing
Detailed Review

SEDY lists a 300-piece pegboard hook set with 16 types of accessories, hardened steel hooks with a chrome-plated finish, and 12 bins, for garages, workshops and craft rooms. The hooks fit both 1/8 inch and 1/4 inch pegboards with 1 inch spacing. The spec table gives product dimensions of 1.0 x 1.0 x 1.0 inches, which cannot describe a 300-piece set, so take the piece count and the 16 types from the title and bullets. No warranty term is stated, so warranty scores zero.

Who it's for: a garage or workshop owner who wants one set to cover hooks and bins across a whole wall. Who should skip it: anyone who wants stated hook lengths or a load figure per hook.

Its Office Score of 9.6/10 comes from performance 30/35, build 21/25, value 21/25, safety not scored (non-powered gear) and warranty 0/5: 72 of 90 points, placed on our 9.2 to 9.8 scale.

Key Specifications
Pieces300
Types16
Fit1/8 and 1/4 inch pegboards
Bins12

Figures as published on the retailer listing, collected 13 November 2026. Performance figures are manufacturer rated.

Safety and Warranty

What this listing states. This product does not plug in or run on a battery, so safety is not part of its score. No warranty term, so warranty scores zero. See How We Pick.

Anchor it. Anchor tall bookshelves and file cabinets to the wall with the supplied hardware or an anti-tip kit, load the lowest shelves and drawers first, and open one drawer at a time.

This is general buying information, not professional advice. Follow each product manual and local rules, and see our Safety Disclaimer.

ELEAD 297-Piece Kit

ELEAD 297-Piece Kit

ELEAD9.6/10 Office Score
i
The Office Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 297-piece kit with 16 types of hooks, 20 bins, a ring tool holder, a multi-tool rack and peg locks; it handles the hooks, bins and holders for a full wall.

Pros

  • 297 pieces with 16 types of hooks: curved, angled and straight
  • 20 pegboard bins plus a ring tool holder and a multi-tool rack
  • Peg locks hold the hooks in place on the board
  • Hooks are hardened steel with chrome plating; bins are durable plastic

Cons

  • No warranty term is stated
  • No hook lengths are stated
  • No load figure is stated for any hook
  • Color field reads 297-Piece Black & Red, which states the count rather than a color
Detailed Review

ELEAD lists a 297-piece kit with 16 types of pegboard hooks, including curved, angled and straight hooks, along with 20 pegboard bins, a ring tool holder, a multi-tool rack and peg locks. The hooks are hardened steel with chrome plating and the bins are durable plastic, and the kit fits both 1/8 inch and 1/4 inch pegboards with 1 inch spacing. The peg locks keep the hooks mounted on metal or wood pegboards. No warranty term is stated, so warranty scores zero.

Who it's for: a workshop owner who wants hooks, bins and holders in one kit with locks to keep them mounted. Who should skip it: anyone who wants stated hook lengths or a load figure per hook.

Its Office Score of 9.6/10 comes from performance 30/35, build 21/25, value 20/25, safety not scored (non-powered gear) and warranty 0/5: 71 of 90 points, placed on our 9.2 to 9.8 scale.

Key Specifications
Pieces297
Types16
Bins20
Fit1/8 and 1/4 inch pegboards

Figures as published on the retailer listing, collected 13 November 2026. Performance figures are manufacturer rated.

Safety and Warranty

What this listing states. This product does not plug in or run on a battery, so safety is not part of its score. No warranty term, so warranty scores zero. See How We Pick.

Anchor it. Anchor tall bookshelves and file cabinets to the wall with the supplied hardware or an anti-tip kit, load the lowest shelves and drawers first, and open one drawer at a time.

This is general buying information, not professional advice. Follow each product manual and local rules, and see our Safety Disclaimer.

INCLY 60-Pack Hooks

INCLY 60-Pack Hooks

INCLY9.6/10 Office Score
i
The Office Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 60-pack of hooks in 2, 4 and 6 inch lengths, 20 of each size, in extra-thick hardened steel with a 30LBS load bearing; it handles hanging tools on a 1/4 inch pegboard.

Pros

  • 60 hooks in 3 sizes, 2, 4 and 6 inch, with 20 of each size
  • Load bearing of 30LBS is stated
  • One-piece L-shape design with rubber tips for protection
  • Extra-thick hardened steel with a powder-coated matte black finish

Cons

  • No warranty term is stated
  • Fits 1/4 inch pegboards only, not 1/8 inch boards
  • No bins, holders or racks are included
  • Maker claims up to 3x thick hooks against competing products, without naming them
Detailed Review

INCLY lists a 60-pack of pegboard hooks in 3 sizes, 2 inch, 4 inch and 6 inch, with 20 hooks of each size, in hardened steel with a powder-coated matte black finish. The one-piece L-shape design is stated to be stronger, and rubber tips protect the items hung on them. The hooks are 0.2 inch thick to fit a 1/4 inch holed pegboard with 1 inch spacing, and the load bearing is stated as 30LBS. No warranty term is stated, so warranty scores zero.

Who it's for: a garage or workshop owner who hangs tools on a 1/4 inch pegboard and wants a stated load figure. Who should skip it: anyone with a 1/8 inch pegboard or anyone who wants bins with the hooks.

Its Office Score of 9.6/10 comes from performance 29/35, build 21/25, value 20/25, safety not scored (non-powered gear) and warranty 0/5: 70 of 90 points, placed on our 9.2 to 9.8 scale.

Key Specifications
Pieces60
Sizes2, 4 and 6 inch
Load bearing30LBS
Fit1/4 inch pegboard

Figures as published on the retailer listing, collected 13 November 2026. Performance figures are manufacturer rated.

Safety and Warranty

What this listing states. This product does not plug in or run on a battery, so safety is not part of its score. No warranty term, so warranty scores zero. See How We Pick.

Anchor it. Anchor tall bookshelves and file cabinets to the wall with the supplied hardware or an anti-tip kit, load the lowest shelves and drawers first, and open one drawer at a time.

This is general buying information, not professional advice. Follow each product manual and local rules, and see our Safety Disclaimer.

ELEAD 66-Piece Hooks

ELEAD 66-Piece Hooks

ELEAD9.6/10 Office Score
i
The Office Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 66-piece set of 2, 4 and 6 inch hooks in heavy-duty hardened steel with a galvanized finish and rubber caps; it handles hanging hand tools on 1/4 and 1/8 inch pegboards.

Pros

  • 66 pieces in 2, 4 and 6 inch lengths
  • Heavy-duty hardened steel with a galvanized finish
  • Fits both 1/4 inch and 1/8 inch pegboards
  • Rubber caps protect items and keep hooks in place

Cons

  • No warranty term is stated
  • No load figure is stated for any hook
  • No bins, holders or racks are included
  • No stated count per size, only the 66-piece total
Detailed Review

ELEAD lists a 66-piece set of 2, 4 and 6 inch pegboard hooks in heavy-duty hardened steel with a galvanized finish, for garages, workshops and kitchens. The hooks fit 1/4 inch and 1/8 inch pegboards, and rubber caps protect items and keep the hooks in place. The set suits hand tools, extension cords and baskets on any wall or board. No warranty term is stated, so warranty scores zero.

Who it's for: a home worker who wants a simple hook set in 2, 4 and 6 inch lengths for a mixed pegboard. Who should skip it: anyone who wants bins, a stated load figure, or a count per size.

Its Office Score of 9.6/10 comes from performance 29/35, build 20/25, value 20/25, safety not scored (non-powered gear) and warranty 0/5: 69 of 90 points, placed on our 9.2 to 9.8 scale.

Key Specifications
Pieces66
Sizes2, 4 and 6 inch
MaterialHardened steel, galvanized
Fit1/4 and 1/8 inch pegboards

Figures as published on the retailer listing, collected 13 November 2026. Performance figures are manufacturer rated.

Safety and Warranty

What this listing states. This product does not plug in or run on a battery, so safety is not part of its score. No warranty term, so warranty scores zero. See How We Pick.

Anchor it. Anchor tall bookshelves and file cabinets to the wall with the supplied hardware or an anti-tip kit, load the lowest shelves and drawers first, and open one drawer at a time.

This is general buying information, not professional advice. Follow each product manual and local rules, and see our Safety Disclaimer.

As an Amazon Associate I earn from qualifying purchases.

FAQ

What size pegboard hooks do I need?

The ELEAD 66-piece and INCLY sets come in 2, 4 and 6 inch lengths, and the INCLY set states 20 hooks of each size. Match the length to the item and the diameter to the board.

Do pegboard hooks fit any pegboard?

The SEDY and both ELEAD sets fit 1/8 inch and 1/4 inch pegboards with 1 inch spacing. The INCLY hooks fit a 1/4 inch pegboard with 1 inch spacing.

How much weight can a pegboard hook hold?

The INCLY hooks state a load bearing of 30LBS. The other listings state no load figure.

What is in a pegboard hook set?

The SEDY set has 300 pieces with 16 types of accessories and 12 bins. The ELEAD 297-piece kit has 16 types of hooks, 20 bins, a ring tool holder, a multi-tool rack and peg locks.

Do pegboard hooks need locks?

The ELEAD 297-piece kit includes peg locks to keep the hooks mounted. The other sets state no locks, so check the listing if your hooks lift off the board.

SEDY 300-Piece Set
Still deciding? Our top pickSEDY 300-Piece Set
Check price on Amazon

More for your workspace

See the best label makers, the label makers and shredders guides and every office storage guide.