A video call drops the moment the laptop moves to the far bedroom, and the router sits behind a closed door at the other end of the home. A wifi extender using house wiring closes that gap by carrying the network signal through the outlets already in the walls, so the far room gets its own WiFi signal without new cables or drilling. The setup is a powerline kit: an adapter plugs in near the router, another plugs in where the signal is weak, and the pair links the rooms over the electrical wiring. This guide explains how the kits work, what speeds the makers list, and how to set one up.
OfficeKitHQ earns a commission when you buy through links on this page, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Affiliate disclosure.
The quick answer
A wifi extender using house wiring is a powerline kit that sends network data through the home electrical wiring instead of through the air. An adapter near the router plugs into a wall outlet and connects to the router with an Ethernet cable, and a matching adapter in the far room plugs into another wall outlet and broadcasts WiFi or offers a wired port. The adapters must sit on the same electrical circuit and plug directly into wall outlets, since the makers state the kits do not work with surge protectors, power strips or extension cords.
How a wifi extender using house wiring works
Powerline adapters turn the electrical wiring into a network cable. A kit ships as a set of two or more adapters that pair with each other, and each adapter carries data between the router and the far room over the wiring. The adapter near the router takes the network from an Ethernet cable and puts it on the wiring, and the adapter in the far room takes it off the wiring again. The far adapter then broadcasts a wireless signal or offers an Ethernet port.
Many kits clone the router network name and password with a WiFi Clone button, so phones and laptops join the same network in each room. Any WiFi settings change on one powerline adapter is then shared across the whole powerline network, according to the maker.
Speeds and reach the makers list
| Kit | Powerline speed | WiFi speed | Connection |
|---|---|---|---|
| TP-Link TL-WPA7617 KIT | AV1000 | 867 Mbps on 5 GHz and 300 Mbps on 2.4 GHz | WiFi and wired |
| TP-Link TL-WPA7817 KIT | AV1000 | 1201 Mbps on 5 GHz and 300 Mbps on 2.4 GHz | WiFi and wired |
| TP-Link TL-WPA8631P KIT | AV1300 | 867 Mbps on 5 GHz and 300 Mbps on 2.4 GHz | WiFi and wired |
| TP-Link TL-PA9020P KIT | AV2000 | No WiFi | Wired, 2 Gigabit ports |
| TP-Link TL-PA7017 KIT | AV1000 | No WiFi | Wired |
| Tenda PH10 | AV1000 | AC650 dual band WiFi | WiFi and wired |
| NETGEAR PLP2000 | 2000 Mbps | No WiFi | Wired, 2 Ethernet ports |
Powerline speed and WiFi speed are separate figures: the powerline figure covers the link over the wiring, and the WiFi figure covers the wireless signal in the far room. The longest reach the makers list comes from the TP-Link TL-WPA7817 KIT (on Amazon), at up to 980 feet, while the other TP-Link kits here each list up to 750 feet through thick walls. The TL-WPA7817 KIT also lists the highest WiFi speed here, at 1201 Mbps on 5 GHz, and connects up to 64 devices at a time. The NETGEAR PLP2000 (on Amazon) lists the highest powerline speed here, at up to 2000 Mbps, but it is not a WiFi device, so it suits a wired connection for a smart TV or a game console. The Linksys RE7000 (on Amazon) lists coverage up to 10,000 square feet and the Linksys RE6300 (on Amazon) lists coverage up to 6,500 square feet, with WiFi speeds up to N300 + AC433 Mbps.
Step 1: Plug in the adapter near the router
Plug an adapter into a wall outlet near the router and connect the two with an Ethernet cable. Use a wall outlet, not a power strip or a surge protector, and keep the adapter clear of large appliances such as washing machines, refrigerators and air conditioners. Ethernet cables are included with several kits here.
Step 2: Plug in the adapter where WiFi is weak
Plug the matching adapter into a wall outlet in the room that needs coverage, on the same electrical circuit as the adapter near the router. The makers state the adapters must sit on the same electrical circuit for connectivity, and a kit must be installed in sets of two or more. Pick an outlet away from large appliances and out in the open rather than behind a cabinet, so the WiFi signal has a clear path into the room.
Step 3: Pair the adapters and clone the network
Press the pair button on each adapter to link them into a paired powerline network. The kits are plug, pair and play, with no configuration required for the wired link. On a WiFi kit, press the WiFi Clone button to copy the router network name and password, so devices use the same network in each room.
Step 4: Check the connection and move the adapter if needed
Connect a phone or a laptop to the new WiFi signal, or plug a device into the Ethernet port, then open a page or start a stream to confirm the link works. If the signal is weak, move the far adapter to an outlet closer to the router and pair the adapters again. For the full setup walkthrough, see Wifi extender how to set up.
When house wiring is the wrong tool
Powerline kits have limits worth knowing before buying. The makers warn that performance may be limited or blocked in homes with AFCI breakers, which are standard in many homes built after 2000. Powerline may also not work with routers or gateways using modified, open-source or non-standard firmware, and the makers name DD-WRT as an example. A kit with no WiFi, such as the TP-Link TL-PA7017 KIT (on Amazon), extends a wired connection only, so a room that needs wireless still needs a WiFi kit. Where the far room sits on a different circuit, or AFCI breakers block the signal, a regular WiFi extender that repeats the wireless signal may suit better, since it does not depend on the wiring at all.
FAQ
Does a wifi extender using house wiring need new cables?
No. The kit uses the electrical wiring already in the walls, and the makers state no new wires are needed. An Ethernet cable links the router to the adapter near it, and the adapters pair over the wiring.
Can a powerline extender reach a room on another floor?
The makers list the kits for multi-story homes, basements, attics and garages, with reach up to 750 feet for most kits here and up to 980 feet for the TP-Link TL-WPA7817 KIT. Thick walls are the exact case the makers describe, since the signal travels over the wiring rather than through the air.
Do powerline adapters work with surge protectors?
No. The makers state the adapters must plug directly into wall outlets and do not work with surge protectors, power strips or extension cords. A passthrough kit keeps the outlet usable, since it adds an integrated power socket for the device that used the outlet.
How many devices can a powerline WiFi kit connect?
The TP-Link TL-WPA7817 KIT lists up to 64 devices at a time, with dual-band WiFi at 1201 Mbps on 5 GHz and 300 Mbps on 2.4 GHz. Other kits here do not state a device limit.
Does a powerline kit replace the router?
No. The kit extends the network the router already provides, and speeds cannot exceed the internet plan limit. The adapter near the router still needs an Ethernet link to the router, and the far adapter still needs the same electrical circuit to reach it.
More for your workspace
See the Wifi extender how to set up guide and what an outlet extender is and when you need one.





