Best Hole Punch Set (2026): 5 Picks, Compared

NEIKO lists the 02604A as a 14 piece set: 13 interchangeable hollow punches plus the 6 in steel handle, which explains why the title says 14 pieces while the bullets count 13 punches. Sizes run from 3/16 in (5mm) to 1-3/8 in (35mm), and the handle includes a spring-loaded center punch with a pilot tip that can be removed for solid disc cutouts. The listing states heat-treated carbon steel punches for rubber, leather, vinyl, carpet, plastic, cardboard, copper and soft brass.

Who it's for: someone who wants one set to cover small and large holes across leather, gasket and craft materials. Who should skip it: anyone who wants a fixed set with no head swapping, or a stated warranty term.

Its Office Score of 9.7/10 comes from performance 32/35, build 22/25, value 21/25, safety 8/10 and warranty 0/5: 83 of 100 points, placed on our 9.2 to 9.8 scale.

Figures as published on the retailer listing, collected 24 October 2026. Performance figures are manufacturer rated.

What this listing states. Knurled handle grip and spring-loaded center punch with pilot tip are stated, so safety scores 8 of 10. No warranty term, so warranty scores zero. See How We Pick.

Shredder and printer safety. Keep hair, ties, jewelry, children and pets away from the feed slot, use the safety lock, unplug when not in use, and give printers and adapters room to vent.

This is general buying information, not professional advice. Follow each product manual and local rules, and see our Safety Disclaimer.

OWDEN lists 12 individual punch sizes from 1/8 in to 3/4 in, with a free cutting mat to place under the material and a canvas pouch that prints each size. The listing states heat-treated carbon steel construction and a no-slip handle grip underneath hammering. Note the spec table gives a hole count of 1, which conflicts with the title and bullets listing 12 punches; this article trusts the title and bullets.

Who it's for: leather and paper workers who want the widest OWDEN range with a mat included. Who should skip it: anyone who wants interchangeable heads, or a stated warranty term.

Its Office Score of 9.6/10 comes from performance 30/35, build 21/25, value 21/25, safety 8/10 and warranty 0/5: 80 of 100 points, placed on our 9.2 to 9.8 scale.

Figures as published on the retailer listing, collected 24 October 2026. Performance figures are manufacturer rated.

What this listing states. No-slip handle grip and cutting mat are stated, so safety scores 8 of 10. No warranty term, so warranty scores zero. See How We Pick.

Shredder and printer safety. Keep hair, ties, jewelry, children and pets away from the feed slot, use the safety lock, unplug when not in use, and give printers and adapters room to vent.

This is general buying information, not professional advice. Follow each product manual and local rules, and see our Safety Disclaimer.

OWDEN lists 9 individual punch sizes from 1/8 in to 1/2 in, with a free cutting mat, a blow case and a color box. The listing states heat-treated high carbon steel construction, a no-slip handle grip underneath hammering, and clean holes in gaskets, leather, paper, rubber, cloth and canvas. The spec table lists a pin hole diameter of 0.5 inches, which matches the largest punch size in the set.

Who it's for: someone who wants a compact leather punch set with a mat and a hard case. Who should skip it: anyone needing holes above 1/2 in, or a stated warranty term.

Its Office Score of 9.6/10 comes from performance 29/35, build 21/25, value 20/25, safety 8/10 and warranty 0/5: 78 of 100 points, placed on our 9.2 to 9.8 scale.

Figures as published on the retailer listing, collected 24 October 2026. Performance figures are manufacturer rated.

What this listing states. No-slip handle grip and cutting mat are stated, so safety scores 8 of 10. No warranty term, so warranty scores zero. See How We Pick.

Shredder and printer safety. Keep hair, ties, jewelry, children and pets away from the feed slot, use the safety lock, unplug when not in use, and give printers and adapters room to vent.

This is general buying information, not professional advice. Follow each product manual and local rules, and see our Safety Disclaimer.

iGeelee lists a 6 piece knockout set with punches in 22.5mm, 28.3mm, 34.6mm, 43.2mm, 49.6mm and 61.5mm, plus 1 wrench, 6 drill bits, 2 pull rods and 1 connector in a red plastic case. The title states a range of 1/2 to 2 inch while the bullets give metric sizes; this article trusts the bullet list. The listing states hardened steel construction and use on mild steel, aluminum, fiberglass and plastic.

Who it's for: conduit and panel work where round holes go through sheet stock. Who should skip it: leather, paper or craft use, or anyone wanting a stated warranty term.

Its Office Score of 9.5/10 comes from performance 28/35, build 20/25, value 19/25, safety 7/10 and warranty 0/5: 74 of 100 points, placed on our 9.2 to 9.8 scale.

Figures as published on the retailer listing, collected 24 October 2026. Performance figures are manufacturer rated.

What this listing states. Long ergonomic handle is stated, so safety scores 7 of 10. No warranty term, so warranty scores zero. See How We Pick.

Shredder and printer safety. Keep hair, ties, jewelry, children and pets away from the feed slot, use the safety lock, unplug when not in use, and give printers and adapters room to vent.

This is general buying information, not professional advice. Follow each product manual and local rules, and see our Safety Disclaimer.

ECOHU lists 5 circle punches in 0.3 in, 0.6 in, 1 in, 1.5 in and 2 in sizes, with a plastic shell, stainless steel cutting blade and spring-action lever. Note a conflict: the bullets give a paper range of 70g-220g while the spec table gives 80g-200g; this article trusts the bullets. The listing states the punches cut cleanly with one press of the handle and warns against sticky paper, tissue paper, felt and too thick paper.

Who it's for: scrapbook, card and photo album makers who punch circles in craft paper. Who should skip it: anyone punching leather, rubber or metal, or anyone wanting a stated warranty term.

Its Office Score of 9.5/10 comes from performance 27/35, build 19/25, value 20/25, safety 5/10 and warranty 0/5: 71 of 100 points, placed on our 9.2 to 9.8 scale.

Figures as published on the retailer listing, collected 24 October 2026. Performance figures are manufacturer rated.

What this listing states. Spring-action lever and handle grip are stated, so safety scores 5 of 10. No warranty term, so warranty scores zero. See How We Pick.

Shredder and printer safety. Keep hair, ties, jewelry, children and pets away from the feed slot, use the safety lock, unplug when not in use, and give printers and adapters room to vent.

This is general buying information, not professional advice. Follow each product manual and local rules, and see our Safety Disclaimer.