Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›

Home office gear, compared spec by spec.

Amazon Black Friday Week deals
Label Makers and Shredders

Best Block Hole Punch (2026): 5 Picks Compared

Five block hole punches compared by piece count, bench block, hammer faces, pad size and material, from pin punch sets to a single-hole punch.

Best Block Hole Punch (2026): 5 Picks Compared

The best block hole punch is the block that holds the work still while the punch lands where it should, because a block that slides or a pad that gives under the punch is what ruins the hole. A stack of papers waits beside the keyboard, the binder needs holes before the pages go in, and the punch set on the desk decides whether the job takes a minute or a morning. We compared block hole punches by piece count, bench block, hammer, pad size and material, using only what each listing publishes.

OfficeKitHQ earns a commission when you buy through links on this page, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Affiliate disclosure.

Quick picks

Our desk picks

BESTNULE 25pc Punch Set

BESTNULE 25pc Punch Set

BESTNULE9.7/10 Office Score
i
The Office Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 25-piece pin punch set with a bench block and a 4-face hammer, in heat-treated 40# chrome steel hardened to HRC 50-55.

Pros

  • 25 pieces cover roll pin, flat pin and hollow end starter punches
  • Bench block includes a magnetic pin catcher and removal grooves
  • Hammer has 4 replaceable faces: brass, chrome steel, nylon and rubber
  • Punches are heat-treated 40# chrome steel hardened to HRC 50-55

Cons

  • No warranty term is stated
  • No safety certification is stated
  • Steel punches top out at 5/16 in
  • Punch lengths top out at 3.58 in
Detailed Review

BESTNULE lists a 25-piece roll pin punch set with a bench block, tweezers and a hammer with 4 detachable faces. The punches are heat-treated 40# chrome steel hardened to HRC 50-55, with a chrome-plated or black oxide finish, and punch lengths run 2.76 to 3.58 in with tip lengths of 0.58 and 0.88 in. The set covers roll pin punches, flat pin punches and hollow end starter punches, plus 8 carbon steel punches from 1/8 to 5/16 in and 2 plastic pin punches. The 8 oz hammer has brass, chrome steel, nylon and rubber faces, and the bench block has a removal groove, a staking groove, a drift channel, a link pin removal V channel, pin removal holes and a magnetic pin catcher. The spec table lists a 25-piece size. No warranty term is stated.

Who it's for: someone who wants one set for roll pins, flat pins and starter punches with a bench block for the work. Who should skip it: anyone who wants a stated warranty term or a paper punch for the office.

Its Office Score of 9.7/10 comes from performance 32/35, build 22/25, value 21/25, safety not scored (non-powered gear) and warranty 0/5: 75 of 90 points, placed on our 9.2 to 9.8 scale.

Key Specifications
Pieces25
Hammer8 oz, 4 faces
Bench blockIncluded
HardnessHRC 50-55

Figures as published on the retailer listing, collected 11 November 2026. Performance figures are manufacturer rated.

Safety and Warranty

What this listing states. This product does not plug in or run on a battery, so safety is not part of its score. No warranty term, so warranty scores zero. See How We Pick.

Shredder and printer safety. Keep hair, ties, jewelry, children and pets away from the feed slot, use the safety lock, unplug when not in use, and give printers and adapters room to vent.

This is general buying information, not professional advice. Follow each product manual and local rules, and see our Safety Disclaimer.

HARFINGTON Punching Pad

HARFINGTON Punching Pad

HARFINGTON9.6/10 Office Score
i
The Office Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 7.87 by 5.91 by 0.59 in PP punching pad for leather, paper and thin plastic sheets.

Pros

  • 7.87 by 5.91 by 0.59 in pad suits leather, paper and thin plastic
  • PP material resists high temperature, oil and wear
  • Strong supporting force and a hard PP surface are stated
  • 15 mm thickness gives a firm backing for punches

Cons

  • No warranty term is stated
  • No safety certification is stated
  • Not suitable for rhombic chopping and needle-shaped circular chopping
  • No punch or hammer is included
Detailed Review

HARFINGTON lists a leather craft punching pad measuring 7.87 by 5.91 by 0.59 in, or 200 by 150 by 15 mm, in PP material. The listing states the pad is high temperature resistant, oil resistant, wear-resistant and durable, with strong supporting force. It suits leather, paper and thin plastic sheets for punching holes, craft stamping, leather cutting and belt punching. The listing warns it is not suitable for rhombic chopping and needle-shaped circular chopping, and that the wrong backing board can tear the back of cut leather. No warranty term is stated.

Who it's for: someone who punches holes in leather, paper or thin plastic and wants a firm pad under the work. Who should skip it: anyone who needs a punch, a hammer or a pad for rhombic chopping.

Its Office Score of 9.6/10 comes from performance 29/35, build 21/25, value 20/25, safety not scored (non-powered gear) and warranty 0/5: 70 of 90 points, placed on our 9.2 to 9.8 scale.

Key Specifications
Pad size7.87 x 5.91 x 0.59 in
MaterialPP
Size200 x 150 x 15 mm
UsesLeather, paper, thin plastic

Figures as published on the retailer listing, collected 11 November 2026. Performance figures are manufacturer rated.

Safety and Warranty

What this listing states. This product does not plug in or run on a battery, so safety is not part of its score. No warranty term, so warranty scores zero. See How We Pick.

Shredder and printer safety. Keep hair, ties, jewelry, children and pets away from the feed slot, use the safety lock, unplug when not in use, and give printers and adapters room to vent.

This is general buying information, not professional advice. Follow each product manual and local rules, and see our Safety Disclaimer.

SEDY 25-Piece Punch Set

SEDY 25-Piece Punch Set

SEDY9.6/10 Office Score
i
The Office Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 25-piece pin punch set with a bench block and a hammer with 4 interchangeable heads.

Pros

  • 25 pieces with a bench block included
  • Hammer has 4 interchangeable heads: rubber, brass, steel and nylon
  • Bench block has grooves and channels for pin removal
  • Listing names leather crafting, metal work and woodworking as uses

Cons

  • No punch sizes are listed
  • No item weight or dimensions are stated
  • No warranty term is stated
  • No safety certification is stated
Detailed Review

SEDY lists a 25-piece pin punch hammer set with a bench block, in black. The chrome-plated steel hammer has 4 interchangeable heads in rubber, brass, steel and nylon, and the detachable design suits assembly work, woodworking and mechanical repairs. The workbench block has multiple grooves and channels for removing pins and springs. The listing names leather crafting, metal work and woodworking as uses, and offers customer service help if issues arise. No punch sizes, item weight or dimensions are stated, and no warranty term is stated.

Who it's for: someone who wants a 25-piece set with a bench block and a hammer that swaps heads for different tasks. Who should skip it: anyone who needs stated punch sizes, a stated weight or a warranty term.

Its Office Score of 9.6/10 comes from performance 28/35, build 20/25, value 20/25, safety not scored (non-powered gear) and warranty 0/5: 68 of 90 points, placed on our 9.2 to 9.8 scale.

Key Specifications
Pieces25
Hammer4 heads
Bench blockIncluded
ColorBlack

Figures as published on the retailer listing, collected 11 November 2026. Performance figures are manufacturer rated.

Safety and Warranty

What this listing states. This product does not plug in or run on a battery, so safety is not part of its score. No warranty term, so warranty scores zero. See How We Pick.

Shredder and printer safety. Keep hair, ties, jewelry, children and pets away from the feed slot, use the safety lock, unplug when not in use, and give printers and adapters room to vent.

This is general buying information, not professional advice. Follow each product manual and local rules, and see our Safety Disclaimer.

Auniwaig Leather Punch Pad

Auniwaig Leather Punch Pad

Auniwaig9.5/10 Office Score
i
The Office Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 5.5 by 4.7 by 0.59 in polyurethane punch pad for leather work, stamping and hole punching.

Pros

  • Pad measures 5.5 by 4.7 by 0.59 in
  • Polyurethane resists oils, solvents and corrosion
  • Tear-resistant surface protects punch and chisel tools
  • Rubber mute board cuts noise during stamping

Cons

  • No warranty term is stated
  • No item weight is stated
  • Paper use is not stated
Detailed Review

Auniwaig lists a leather craft punch pad in polyurethane, measuring 5.5 by 4.7 by 0.59 in, or 14 by 12 by 1.5 cm. The listing states the rubber mute board resists oils, solvents and corrosion, has a smooth tear-resistant surface, and protects punch and chisel tools while cutting noise. It suits hole punching, bag hardware installation, intricate stamping and leather cutting. The spec table lists a 7.9 by 1.9 in size that does not match the 5.5 by 4.7 in size in the title and bullets; the title and bullets win. No item weight or warranty term is stated.

Who it's for: someone who wants a small pad for leather stamping and hole punching at a desk. Who should skip it: anyone who needs a stated weight, a warranty term or a pad for paper.

Its Office Score of 9.5/10 comes from performance 27/35, build 19/25, value 19/25, safety not scored (non-powered gear) and warranty 0/5: 65 of 90 points, placed on our 9.2 to 9.8 scale.

Key Specifications
Pad size5.5 x 4.7 x 0.59 in
MaterialPolyurethane
Pieces1

Figures as published on the retailer listing, collected 11 November 2026. Performance figures are manufacturer rated.

Safety and Warranty

What this listing states. This product does not plug in or run on a battery, so safety is not part of its score. No warranty term, so warranty scores zero. See How We Pick.

Shredder and printer safety. Keep hair, ties, jewelry, children and pets away from the feed slot, use the safety lock, unplug when not in use, and give printers and adapters room to vent.

This is general buying information, not professional advice. Follow each product manual and local rules, and see our Safety Disclaimer.

Swingline 1-Hole Punch 74005

Swingline 1-Hole Punch 74005

Swingline9.5/10 Office Score
i
The Office Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A compact chrome single-hole punch for teachers on the move, with a 5-sheet capacity and a hinged chip compartment.

Pros

  • Compact chrome punch fits pockets and backpacks
  • Solid metal plier design for long-term durability
  • Hinged compartment holds punched paper chips
  • Limited 90 day warranty stated

Cons

  • 5-sheet capacity is the lowest of the picks
  • Single hole only, not for binder filing
  • No grip description is stated
  • Small size suits single sheets, not large stacks
Detailed Review

The Swingline 1 Hole Punch is a handheld single-hole punch in solid metal with a traditional slim plier design, punching up to 5 sheets at a time in precise 1/4 inch holes. A hinged compartment holds punched paper chips and opens for disposal into a waste basket, and its compact chrome body fits pockets and backpacks. Its dimensions are 5.9 inches x 2.7 inches x 0.3 inches, and the listing states a limited 90 day warranty.

Who it's for: a teacher who wants a pocket punch for single sheets on the go. Who should skip it: a teacher punching binder sets or large stacks, where the 5-sheet capacity slows the job.

Its Office Score of 9.5/10 comes from performance 26/35, build 21/25, value 16/25, safety not scored (non-powered gear) and warranty 2/5: 65 of 90 points, placed on our 9.2 to 9.8 scale.

Key Specifications
HolesSingle hole
Sheet capacity5 sheets
Hole size1/4 inch
Chip compartmentHinged compartment

Figures as published on the retailer listing, collected 29 October 2026. Performance figures are manufacturer rated.

Safety and Warranty

What this listing states. This product does not plug in or run on a battery, so safety is not part of its score. Limited 90 day. It does not say everything a buyer needs, such as who pays return shipping, so warranty scores 2 of 5. See How We Pick.

Shredder and printer safety. Keep hair, ties, jewelry, children and pets away from the feed slot, use the safety lock, unplug when not in use, and give printers and adapters room to vent.

This is general buying information, not professional advice. Follow each product manual and local rules, and see our Safety Disclaimer.

As an Amazon Associate I earn from qualifying purchases.

More picks to compare

  • BESTNULE 24pc Punch SetBESTNULE 24pc Punch SetA 24-piece pin punch set with hammer for repair work.Check on Amazon
  • CALFOVERA Punch Pad 2-PackCALFOVERA Punch Pad 2-PackTwo plastic punch pads for leather work and DIY crafts.Check on Amazon

Specs compared

Hole punch Office Score Pieces Block or pad Hammer Warranty Amazon
BESTNULE 25pc Punch Set 9.7/10 25 pieces Bench block included 8 oz, 4 faces Not stated View on Amazon
HARFINGTON Punching Pad 9.6/10 1 pad 7.87 x 5.91 x 0.59 in Not included Not stated View on Amazon
SEDY 25-Piece Punch Set 9.6/10 25 pieces Bench block included 4 heads Not stated View on Amazon
Auniwaig Leather Punch Pad 9.5/10 1 pad 5.5 x 4.7 x 0.59 in Not included Not stated View on Amazon
Swingline 1 Hole Punch 9.5/10 1 hole Not stated Not included Not stated

All numbers are the manufacturer’s stated specs, not measured in an office, pulled on 11 November 2026. None of the five state a warranty term; none of the five states a safety certification.

How to choose the best block hole punch

Start with the piece count and the block

Two of the five picks are 25-piece pin punch sets with a bench block: the BESTNULE set and the SEDY set. Both include a hammer with 4 faces or heads and a block with grooves and channels for pin removal. The BESTNULE set lists every punch size, from 1/16 in roll pin punches to 5/16 in carbon steel punches, plus 2 plastic pin punches, while the SEDY set lists no punch sizes at all. If the job is driving pins, a set with a block beats a pad; if the job is punching holes in paper, the Swingline single-hole punch is the only paper punch here.

Match the pad to the work

The two pads could hardly be more different in size: the HARFINGTON pad measures 7.87 by 5.91 by 0.59 in, while the Auniwaig pad measures 5.5 by 4.7 by 0.59 in. The HARFINGTON pad is PP and suits leather, paper and thin plastic sheets; the Auniwaig pad is polyurethane and suits leather work, stamping and hole punching. Both are 0.59 in thick. Pick the larger pad when the work is wide, and the smaller pad when desk space is tight.

Pad Size Material Uses
Auniwaig Leather Punch Pad 5.5 x 4.7 x 0.59 in Polyurethane Leather work, stamping
HARFINGTON Punching Pad 7.87 x 5.91 x 0.59 in PP Leather, paper, thin plastic

Figures as stated in each listing. The Auniwaig spec table lists a 7.9 by 1.9 in size that does not match its title; the title and bullets win.

Read the hammer and the block

The BESTNULE hammer weighs 8 oz and has 4 replaceable faces in brass, chrome steel, nylon and rubber, so one hammer covers heavy striking and delicate assembly. The SEDY hammer has 4 interchangeable heads in rubber, brass, steel and nylon. The BESTNULE bench block adds a magnetic pin catcher, a removal groove, a staking groove, a drift channel and pin removal holes, with an anti-slip textured bottom. The SEDY block lists grooves and channels without naming them. A block with a magnetic catcher keeps small pins from rolling off the desk.

Read the warranty line

None of the five listings states a warranty term. The SEDY listing offers customer service help if issues arise, and the BESTNULE listing leans on hardened steel and reinforced stress points, but neither puts a term in writing. A warranty term is worth more than a general promise of quality, so read the warranty line before you buy. For a paper punch, see our best two hole punch picks, and for labelling the filed pages, see our best label maker picks.

Setup Notes

  • Measure the desk space against the 7.87 by 5.91 in pad and the 5.5 by 4.7 in pad before choosing.
  • Match punch sizes to the pins: the BESTNULE steel punches run 1/8 to 5/16 in.
  • No power or charging applies: none of these picks lists a cord, battery or plug.
  • Check the box on arrival: the BESTNULE set lists a compact organizer box with bench block, while the SEDY set lists no case.
  • No assembly steps are stated for any pick, so check the box contents on arrival.

FAQ

What is a bench block for in a punch set?

A bench block gives pins a stable surface for removal and staking. The BESTNULE block has a removal groove, a staking groove, a drift channel, pin removal holes and a magnetic pin catcher, with an anti-slip textured bottom.

Which punch pad is larger?

The HARFINGTON pad at 7.87 by 5.91 by 0.59 in is larger than the Auniwaig pad at 5.5 by 4.7 by 0.59 in. Both are 0.59 in thick.

How many sheets does the Swingline punch handle?

The Swingline 1 Hole Punch lists a 5 sheet capacity. The listing gives no other details.

What hammer faces come with the BESTNULE set?

The 8 oz hammer has 4 replaceable faces: brass, chrome steel, nylon and rubber.

Do any of these picks state a warranty term?

No. None of the five listings states a warranty term, so warranty scores zero for every pick.

BESTNULE 25pc Punch Set
Still deciding? Our top pickBESTNULE 25pc Punch Set
Check price on Amazon

Score breakdown

The Office Score weighs performance (piece count, bench block, hammer faces and pad size), build (steel grade, pad material and item weight), value for the stated specs, safety and warranty. For a hole punch, safety means a stated safety certification on the listing; none of the five states one. None of the five listings states a warranty term. How we pick explains the weights.

Product Office Score Perf. /35 Build /25 Value /25 Safety /10 Warranty /5
BESTNULE 25pc Punch Set 9.7 32 22 21 n/a 0
HARFINGTON Punching Pad 9.6 29 21 20 n/a 0
SEDY 25-Piece Punch Set 9.6 28 20 20 n/a 0
Auniwaig Leather Punch Pad 9.5 27 19 19 n/a 0

We fit point totals onto a 9.2 low and 9.8 high in a straight line. One item can outscore another only by earning more points. When an item is unpowered and its listing names no safety feature, we drop safety and score it out of 90 points.

More for your workspace

See every label makers and shredders guide and all office machines and storage guides.

More picks: desk organizers and whiteboards, bookshelves and file cabinets, home office printers.