The pile of papers beside the laptop keeps growing through the morning call, next to a dim webcam and a chair that sinks by noon, and the best double d hole punch is the tool that turns that pile into a binder-ready stack. We compared 5 two-hole paper punches by sheet capacity, hole spacing, hole size, handle comfort and warranty term, using only what each listing publishes. Capacities run from 20 sheets to 150 sheets, and 2 of the 5 state a lifetime warranty.
OfficeKitHQ earns a commission when you buy through links on this page, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Affiliate disclosure.
Quick picks
Best Overall Swingline 74050: 28-sheet capacity, padded handle, lifetime warranty stated Check price on Amazon
Best for Big Stacks CARL HC-240: 40-sheet capacity, hardened all-steel heads, lifetime warranty stated Check price on Amazon
Best Low Effort Swingline 74135: SmartTouch handle, 50% less force, 9/32 in holes Check price on Amazon
Best High Capacity Topfurn Heavy Duty: 150-sheet capacity, replaceable cutter head, 100 clips included Check price on Amazon
Best Compact FNLIOTUY 2-Hole Punch: 30-sheet capacity, 80 mm spacing, 7 mm holes, locking handle Check price on Amazon
Our desk picks
| # | Product | Office Score | Buy |
|---|---|---|---|
| 1 | Swingline 74050 | 9.6/10 | Buy on Amazon |
| 2 | CARL HC-240 | 9.6/10 | Buy on Amazon |
| 3 | Swingline 74135 | 9.5/10 | Buy on Amazon |
| 4 | Topfurn Heavy Duty | 9.5/10 | Buy on Amazon |
| 5 | FNLIOTUY 2-Hole Punch | 9.5/10 | Buy on Amazon |

Swingline 74050
A 28-sheet 2-hole punch with a wide padded comfort handle that locks closed, a 1/4 in hole size and a limited lifetime warranty.
Pros
- 28-sheet capacity with a 1/4 in hole
- Wide padded handle needs 50% less force, per the maker
- Handle locks in closed position for easy storage
- Limited lifetime warranty is stated
Cons
- No hole spacing is stated
- 1.3 lb item weight is heavier than the Swingline 74135
- No window to check chip level is stated
- 28-sheet capacity is lower than the CARL at 40 sheets
Detailed Review
Swingline lists the 74050 as a 28-sheet 2-hole punch with metal construction, a wide padded comfort handle and a built-in adjustable paper guide. The punch makes a 1/4 in hole, needs 50% less manual force than traditional hole punches, per the maker, and the handle locks in closed position for easy storage. The removable non-skid tray keeps the punch in place and helps with cleanup. The spec table gives a 3.2 by 6.2 by 4.6 in footprint and a 1.3 lb item weight, and states a limited lifetime warranty.
Who it's for: someone who punches 28 sheets at a time and wants a padded handle with a lifetime warranty. Who should skip it: anyone who needs 40 sheets or more in one go, or a stated hole spacing for a specific binder.
Its Office Score of 9.6/10 comes from performance 29/35, build 21/25, value 21/25, safety 3/10 and warranty 4/5: 78 of 100 points, placed on our 9.2 to 9.8 scale.
Key Specifications
| Sheet capacity | 28 sheets |
|---|---|
| Hole size | 1/4 in |
| Handle | Padded, locks closed |
| Item weight | 1.3 lb |
Figures as published on the retailer listing, collected 8 November 2026. Performance figures are manufacturer rated.
Safety and Warranty
What this listing states. Handle locks in closed position for easy storage, so safety scores 3 of 10. Limited Lifetime warranty. It does not say everything a buyer needs, such as who pays return shipping, so warranty scores 4 of 5. See How We Pick.
Shredder and printer safety. Keep hair, ties, jewelry, children and pets away from the feed slot, use the safety lock, unplug when not in use, and give printers and adapters room to vent.
This is general buying information, not professional advice. Follow each product manual and local rules, and see our Safety Disclaimer.

CARL HC-240
A 40-sheet two-hole punch with hardened all-steel heads, dual self-centering guides and a handle that locks down, with a limited lifetime warranty.
Pros
- 40-sheet capacity
- Hardened precision-ground all-steel punch heads
- Dual self-centering guides for positioning
- Limited lifetime warranty is stated
Cons
- Part number HC-340 and model HC-240 do not match
- No hole spacing is stated
- 2.0 lb item weight is heavier than the Swingline punches
Detailed Review
CARL lists the HC-240 as a 40-sheet two-hole punch with a strong handle grip, hardened precision-ground all-steel punch heads and dual self-centering guides. The handle locks down for storage and safety, the receptacle tray removes for cleanup, and the base is non-skid. Two contradictions to note: the title states 9/32 in holes while the bullets state 1/4 in holes, and the spec table lists part number HC-340 against model HC-240. The spec table gives a 6.5 by 7.75 by 3.25 in footprint and a 2.0 lb item weight, and states a limited lifetime warranty.
Who it's for: someone who punches 40 sheets at a time and wants a lifetime warranty with self-centering guides. Who should skip it: anyone who needs one certain hole size, since the listing states two, or a stated hole spacing.
Its Office Score of 9.6/10 comes from performance 29/35, build 21/25, value 20/25, safety 3/10 and warranty 4/5: 77 of 100 points, placed on our 9.2 to 9.8 scale.
Key Specifications
| Sheet capacity | 40 sheets |
|---|---|
| Hole size | 9/32 in (title); 1/4 in (bullets) |
| Handle | Strong grip, locks down |
| Item weight | 2.0 lb |
Figures as published on the retailer listing, collected 8 November 2026. Performance figures are manufacturer rated.
Safety and Warranty
What this listing states. Handle locks down for storage and safety; non-skid base, so safety scores 3 of 10. Limited Lifetime Warranty. It does not say everything a buyer needs, such as who pays return shipping, so warranty scores 4 of 5. See How We Pick.
Shredder and printer safety. Keep hair, ties, jewelry, children and pets away from the feed slot, use the safety lock, unplug when not in use, and give printers and adapters room to vent.
This is general buying information, not professional advice. Follow each product manual and local rules, and see our Safety Disclaimer.

Swingline 74135
A 20-sheet 2-hole punch with a SmartTouch low-effort comfort handle, a 9/32 in hole size and a 90-day warranty.
Pros
- SmartTouch handle needs 50% less force, per the maker
- Wide soft grip handle adds comfort
- Base opening shows when the chip tray is full
- Heads and edge guide keep punch alignment consistent
Cons
- 20-sheet capacity is the lowest here
- 90-day warranty is the briefest term stated here
- No hole spacing is stated
- No removable chip tray is stated; disposal is through a base opening
Detailed Review
Swingline lists the 74135 as a 20-sheet 2-hole punch with strong metal construction and an edge guide for consistent alignment. The SmartTouch handle is wide with a soft grip, locks in closed position for storage, and needs 50% less manual force than traditional hole punches, per the maker. The punch makes precise 9/32 in holes, and an opening in the base allows chip disposal and shows when the tray is full. The spec table gives a 5.81 by 2.125 by 4.31 in footprint and a 0.98 lb item weight, and states a 90-day warranty.
Who it's for: someone who punches small stacks and wants the lowest-effort handle here. Who should skip it: anyone who punches more than 20 sheets at a time or wants a lifetime warranty.
Its Office Score of 9.5/10 comes from performance 28/35, build 20/25, value 20/25, safety 3/10 and warranty 2/5: 73 of 100 points, placed on our 9.2 to 9.8 scale.
Key Specifications
| Sheet capacity | 20 sheets |
|---|---|
| Hole size | 9/32 in |
| Handle | SmartTouch, soft grip, locks closed |
| Item weight | 0.98 lb |
Figures as published on the retailer listing, collected 8 November 2026. Performance figures are manufacturer rated.
Safety and Warranty
What this listing states. Handle locks in closed position for easy storage, so safety scores 3 of 10. 90 Day warranty. It does not say everything a buyer needs, such as who pays return shipping, so warranty scores 2 of 5. See How We Pick.
Shredder and printer safety. Keep hair, ties, jewelry, children and pets away from the feed slot, use the safety lock, unplug when not in use, and give printers and adapters room to vent.
This is general buying information, not professional advice. Follow each product manual and local rules, and see our Safety Disclaimer.

Topfurn Heavy Duty
A heavy-duty 2-hole punch with a 150-sheet capacity, a 2 3/4 in (70 mm) hole distance, a replaceable cutter head and 100 free reinforced metal clips.
Pros
- 150-sheet capacity, the highest here by a wide margin
- All-steel punching head on a metal base plate
- Replaceable cutter head
- 100 free reinforced metal clips are included
Cons
- No warranty term is stated
- No locking handle is stated
- 4.4 lb item weight is the heaviest here
- No hole size is stated
Detailed Review
Topfurn lists this heavy-duty 2-hole punch at 150 sheets with a 2 3/4 in (70 mm) hole distance, a metal base plate and an all-steel punching head. A built-in paper guide aligns the paper, a transparent waste bin shows fill levels, and the cutter head is replaceable. The listing includes 100 free reinforced metal clips for binders with 2.75 in hole spacing and binders up to 2 in thick. The spec table gives a 13.23 by 5.98 by 6.3 in footprint and a 4.4 lb item weight, and states no warranty term.
Who it's for: an office or school that punches thick stacks and wants the highest capacity here. Who should skip it: anyone with a small desk or anyone who wants a locking handle or a warranty term.
Its Office Score of 9.5/10 comes from performance 33/35, build 22/25, value 22/25, safety 0/10 and warranty 0/5: 77 of 100 points, placed on our 9.2 to 9.8 scale.
Key Specifications
| Sheet capacity | 150 sheets |
|---|---|
| Hole spacing | 2 3/4 in (70 mm) |
| Item weight | 4.4 lb |
| Included | 100 reinforced metal clips |
Figures as published on the retailer listing, collected 8 November 2026. Performance figures are manufacturer rated.
Safety and Warranty
What this listing states. This product does not plug in or run on a battery, so safety is not part of its score. No warranty term, so warranty scores zero. See How We Pick.
Shredder and printer safety. Keep hair, ties, jewelry, children and pets away from the feed slot, use the safety lock, unplug when not in use, and give printers and adapters room to vent.
This is general buying information, not professional advice. Follow each product manual and local rules, and see our Safety Disclaimer.

FNLIOTUY 2-Hole Punch
A 30-sheet 2-hole punch with 80 mm hole spacing, 7 mm holes, an adjustable paper guide and a locking mechanism for storage.
Pros
- Punches 30 sheets of 20 lb paper in one go
- 80 mm hole spacing with 7 mm holes fits most binders, per the listing
- Rust-resistant metal construction
- Locking mechanism for compact, safe storage
Cons
- No warranty term is stated
- No handle description is stated
- 30-sheet capacity is lower than the CARL at 40 sheets
- No self-centering guides are stated, only an adjustable guide
Detailed Review
FNLIOTUY lists this 2-hole punch at 30 sheets of standard 20 lb paper in one go, with 80 mm hole spacing and 7 mm holes the maker calls industry-standard. The punch is rust-resistant metal with an adjustable guide, a non-slip base and a detachable waste tray, plus a locking mechanism for compact, safe storage. The spec table gives a 5.83 by 4.38 by 2.53 in footprint and states no warranty term.
Who it's for: someone who files 30 sheets at a time and wants standard 80 mm spacing with a locking handle. Who should skip it: anyone who needs more than 30 sheets per punch or a warranty term.
Its Office Score of 9.5/10 comes from performance 28/35, build 20/25, value 20/25, safety 3/10 and warranty 0/5: 71 of 100 points, placed on our 9.2 to 9.8 scale.
Key Specifications
| Sheet capacity | 30 sheets |
|---|---|
| Hole spacing | 80 mm |
| Hole size | 7 mm |
| Dimensions | 5.83 x 4.38 x 2.53 in |
Figures as published on the retailer listing, collected 8 November 2026. Performance figures are manufacturer rated.
Safety and Warranty
What this listing states. Locking mechanism for compact, safe storage; non-slip base, so safety scores 3 of 10. No warranty term, so warranty scores zero. See How We Pick.
Shredder and printer safety. Keep hair, ties, jewelry, children and pets away from the feed slot, use the safety lock, unplug when not in use, and give printers and adapters room to vent.
This is general buying information, not professional advice. Follow each product manual and local rules, and see our Safety Disclaimer.
As an Amazon Associate I earn from qualifying purchases.
More picks to compare
Officemate Deluxe 2-Hole Punch50-sheet capacity with a padded handle and slide-out chip drawer for busy desksCheck on Amazon
TEMCo Double D Punch Die SetDouble-D dies for punching sheet metal, not paper filingCheck on Amazon
Specs compared
| Hole punch | Office Score | Sheet capacity | Hole spacing | Hole size | Handle | Warranty | Amazon |
|---|---|---|---|---|---|---|---|
| Swingline 74050 | 9.6/10 | 28 sheets | Not stated | 1/4 in | Padded, locks closed | Limited Lifetime | View on Amazon |
| CARL HC-240 | 9.6/10 | 40 sheets | Not stated | 9/32 in (title); 1/4 in (bullets) | Strong grip, locks down | Limited Lifetime | View on Amazon |
| Swingline 74135 | 9.5/10 | 20 sheets | Not stated | 9/32 in | Soft grip, SmartTouch, locks closed | 90 Day | View on Amazon |
| Topfurn Heavy Duty | 9.5/10 | 150 sheets | 2 3/4 in (70 mm) | Not stated | Not stated | Not stated | View on Amazon |
| FNLIOTUY 2-Hole Punch | 9.5/10 | 30 sheets | 80 mm | 7 mm | Not stated | Not stated | View on Amazon |
Dimensions, weight limits and ranges are the maker’s ratings as each listing gives them, collected 8 November 2026. The Swingline 74050 and the CARL state a lifetime warranty; the Swingline 74135 states 90 days.
How to choose the best double d hole punch
Match capacity to the stack
Sheet capacity runs from 20 sheets on the Swingline 74135 to 150 sheets on the Topfurn, with the Swingline 74050 at 28 sheets, the FNLIOTUY at 30 sheets and the CARL at 40 sheets. A 20-sheet punch suits a small stack at a time. The Topfurn suits tax-season filing and heavy paperwork, per the listing. If you want a punch you can see through, the best clear hole punch roundup covers that style. Pick the capacity that matches the thickest stack you punch in one go, not the thinnest.
Check hole spacing and hole size
Hole spacing and hole size decide which binder the punched pages fit. The FNLIOTUY states 80 mm spacing with 7 mm holes, which the listing calls industry-standard spacing. The Topfurn states 2 3/4 in (70 mm) spacing and includes 100 clips for binders with 2.75 in spacing and binders up to 2 in thick. The Swingline 74135 makes 9/32 in holes and the Swingline 74050 makes 1/4 in holes. The CARL title states 9/32 in holes while the bullets state 1/4 in holes, so check with the seller before you count on either size. Match the spacing to the binder you file into; see the ring binder for notes guide for binder options.
Handles, guides and chip trays
The handle decides how the punch feels on a long filing session. The Swingline 74135 uses a SmartTouch handle the maker says needs 50% less force, and the Swingline 74050 has a wide padded handle. Each Swingline handle locks closed for storage. The CARL has a strong handle grip and dual self-centering guides, and the FNLIOTUY has an adjustable guide and a non-slip base. Chip trays keep the desk clean: the FNLIOTUY tray detaches, the Topfurn bin is transparent so fill levels show, and the Swingline 74135 has an opening in the base for chip disposal.
| Hole punch | Item weight | Footprint | Handle |
|---|---|---|---|
| Swingline 74050 | 1.3 lb | 3.2 x 6.2 x 4.6 in | Padded, locks closed |
| CARL HC-240 | 2.0 lb | 6.5 x 7.75 x 3.25 in | Strong grip, locks down |
| Swingline 74135 | 0.98 lb | 5.81 x 2.125 x 4.31 in | Soft grip, SmartTouch, locks closed |
| Topfurn Heavy Duty | 4.4 lb | 13.23 x 5.98 x 6.3 in | Not stated |
| FNLIOTUY 2-Hole Punch | Not stated | 5.83 x 4.38 x 2.53 in | Not stated |
Figures as stated in each listing’s spec table.
Read the warranty line, not the headline
The Swingline 74050 and the CARL state a limited lifetime warranty. The Swingline 74135 states 90 days. The Topfurn and the FNLIOTUY state no warranty term. A limited lifetime term is the longest term stated here; a 90-day term is the briefest.
Setup Notes
- Measure the desk space: the Topfurn is 13.23 in long, the CARL is 7.75 in long, and the FNLIOTUY is 5.83 in long.
- Check hole spacing against the binder: 80 mm on the FNLIOTUY, 2 3/4 in (70 mm) on the Topfurn.
- Plan chip disposal: the FNLIOTUY tray detaches, the Topfurn bin is transparent, and the Swingline 74135 has a base opening for chips.
- Storage: the FNLIOTUY, the Swingline 74050, the Swingline 74135 and the CARL all lock closed for storage; the Topfurn states no lock.
FAQ
What sheet capacity do I need for home filing?
Match the thickest stack you punch in one go. The Swingline 74135 handles 20 sheets, the Swingline 74050 handles 28 sheets, the FNLIOTUY handles 30 sheets, the CARL handles 40 sheets and the Topfurn handles 150 sheets.
What hole spacing fits a standard binder?
The FNLIOTUY states 80 mm spacing with 7 mm holes and calls it industry-standard spacing. The Topfurn states 2 3/4 in (70 mm) spacing and includes 100 clips for binders with 2.75 in spacing. The Swingline and CARL listings state no hole spacing, so check the binder before you buy.
Which of these punches has a lifetime warranty?
The Swingline 74050 and the CARL state a limited lifetime warranty. The Swingline 74135 states 90 days, and the Topfurn and the FNLIOTUY state no warranty term.
What hole size do these punches make?
The FNLIOTUY makes 7 mm holes, the Swingline 74135 makes 9/32 in holes and the Swingline 74050 makes 1/4 in holes. The CARL title states 9/32 in holes while the bullets state 1/4 in holes, so confirm the size with the seller. The Topfurn states no hole size.
Is the heavy-duty Topfurn too big for a small desk?
The Topfurn is 13.23 in long and weighs 4.4 lb, the largest and heaviest punch here. The FNLIOTUY is 5.83 in long and the Swingline 74135 is 5.81 in long, so either suits a small desk better. The Topfurn suits heavy paperwork and tax-season filing, per the listing.
Score breakdown
The Office Score weighs performance (sheet capacity, hole spacing, hole size and paper guide), build (metal construction, handle and base), value for the stated specs, safety and warranty. For a hole punch, safety means a handle that locks closed for storage and a base that stays put; the FNLIOTUY, the Swingline 74050, the Swingline 74135 and the CARL state a locking handle, and the Topfurn does not. The Swingline 74050 and the CARL state a limited lifetime warranty, and the Swingline 74135 states 90 days. How we pick explains the weights.
| Product | Office Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| Swingline 74050 | 9.6 | 29 | 21 | 21 | 3 | 4 |
| CARL HC-240 | 9.6 | 29 | 21 | 20 | 3 | 4 |
| Swingline 74135 | 9.5 | 28 | 20 | 20 | 3 | 2 |
| Topfurn Heavy Duty | 9.5 | 33 | 22 | 22 | 0 | 0 |
| FNLIOTUY 2-Hole Punch | 9.5 | 28 | 20 | 20 | 3 | 0 |
Office Scores run on a short 9.2 to 9.8 scale. We place each item’s weighted point total on it in proportion, so a larger total is always shown as a larger score.
More for your workspace
See every label maker and shredder guide and all office machines and storage guides.
More picks: clear hole punch, label maker, ring binder for notes.





