The best drafting chair foot rest is the one that holds your feet at the right height for the chair you sit in, because feet that dangle or a rest that slides away make a long session at a tall desk harder to sit through. A ring that fits the chair cylinder, a stool that swivels to the right spot, or a rest with enough heights to match the desk all do the same job in different ways. We compared footrests by height range, size, material, chair attachment and warranty term, using only what each listing publishes.
OfficeKitHQ earns a commission when you buy through links on this page, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Affiliate disclosure.
Quick picks
Best Overall CasaZenith Foot Rest: Six heights from 3.1 to 7.3 in, massage rollers, ABS Check price on Amazon
Best Swivel Stool LUE BONA Foot Rest: 360 swivel, 15.35 to 19.29 in height, 300 lb capacity Check price on Amazon
Best Chair Attachment BALAPET Footrest Attachment: Height 15.4 to 20.5 in, locking casters, PU leather Check price on Amazon
Best Heated Pick Snailax Foot Rest: 3 heat levels, 3 vibration modes, swing, timer Check price on Amazon
Best Drafting Ring Frassie Foot Rest Ring: 17.7 in ring fits a 2 in chair cylinder Check price on Amazon
Our desk picks
| # | Product | Office Score | Buy |
|---|---|---|---|
| 1 | CasaZenith Foot Rest | 9.6/10 | Buy on Amazon |
| 2 | LUE BONA Foot Rest | 9.6/10 | Buy on Amazon |
| 3 | BALAPET Footrest Attachment | 9.6/10 | Buy on Amazon |
| 4 | Snailax Foot Rest | 9.5/10 | Buy on Amazon |
| 5 | Frassie Foot Rest Ring | 9.4/10 | Buy on Amazon |

CasaZenith Foot Rest
An under-desk footrest with six heights from 3.1 to 7.3 in, four massage rollers and a non-slip ABS base.
Pros
- Six heights from 3.1 to 7.3 in, set by screws on both sides
- Four massage rollers and a small-particle massage surface
- Non-slip pads keep the rest from sliding
- Detachable design for use at the office, home or travel
Cons
- No warranty term is stated
- No weight capacity is stated
- Height changes by rotating screws on both sides
- ABS surface, with no cushion stated
Detailed Review
CasaZenith lists a footrest with six heights, 3.1, 3.9, 4.9, 5.7, 6.5 and 7.3 in, set by rotating screws on both sides. The rest has a small-particle massage surface with four massage rollers, an ABS body and non-slip pads at the bottom. The listing gives a 16.5 by 12.2 by 7.5 in size, and the rest is detachable for use at the office, home or travel.
Who it's for: a desk worker who wants six heights and massage rollers under the desk. Who should skip it: anyone who wants a ring or attachment that mounts to the chair.
Its Office Score of 9.6/10 comes from performance 30/35, build 21/25, value 21/25, safety 5/10 and warranty 0/5: 77 of 100 points, placed on our 9.2 to 9.8 scale.
Key Specifications
| Heights | 3.1 to 7.3 in, six settings |
|---|---|
| Massage | 4 rollers |
| Material | ABS |
| Size | 16.5 x 12.2 x 7.5 in |
Figures as published on the retailer listing, collected 10 November 2026. Performance figures are manufacturer rated.
Safety and Warranty
What this listing states. Non-slip pads at the bottom of the rest, so safety scores 5 of 10. No warranty term, so warranty scores zero. See How We Pick.
Comfort, not treatment. Cushions, pillows, footrests and chair mats change how a desk feels; they are not medical devices. Check the size against your chair or floor and keep mats flat so casters do not catch.
This is general buying information, not professional advice. Follow each product manual and local rules, and see our Safety Disclaimer.

LUE BONA Foot Rest
A saddle-style footrest stool with 360 swivel, a height range of 15.35 to 19.29 in and a 300 lb capacity.
Pros
- Height adjusts from 15.35 to 19.29 in
- 360 swivel and a saddle-style design
- 300 lb capacity stated
- Assembly in under 10 minutes with parts in the box
Cons
- No warranty term is stated
- Lowest height of 15.35 in sits higher than the under-desk rests
- Faux leather and foam, with no hard platform stated
- Gloss Black is the only color stated
Detailed Review
LUE BONA lists a saddle-style footrest stool that measures 16.93 by 12.6 in, with a height that adjusts from 15.35 to 19.29 in and a 360 swivel. The cushion is high-density foam and faux leather with a 3.1 to 3.5 in thick pad, and the listing states a 300 lb capacity. The round base has anti-slip rubber strips, and the parts and hardware for assembly come in the box, with assembly in under 10 minutes.
Who it's for: a desk worker who wants a swivel stool with a wide height range. Who should skip it: anyone who wants a floor rest with low heights or a chair-mounted ring.
Its Office Score of 9.6/10 comes from performance 29/35, build 21/25, value 21/25, safety 5/10 and warranty 0/5: 76 of 100 points, placed on our 9.2 to 9.8 scale.
Key Specifications
| Height | 15.35 to 19.29 in |
|---|---|
| Size | 16.93 x 12.6 in |
| Capacity | 300 lb |
| Pad | 3.1 to 3.5 in thick |
Figures as published on the retailer listing, collected 10 November 2026. Performance figures are manufacturer rated.
Safety and Warranty
What this listing states. Anti-slip rubber strips grip the floor, so safety scores 5 of 10. No warranty term, so warranty scores zero. See How We Pick.
Comfort, not treatment. Cushions, pillows, footrests and chair mats change how a desk feels; they are not medical devices. Check the size against your chair or floor and keep mats flat so casters do not catch.
This is general buying information, not professional advice. Follow each product manual and local rules, and see our Safety Disclaimer.

BALAPET Footrest Attachment
A chair-mounted footrest attachment with height from 15.4 to 20.5 in, distance from 15.7 to 26.4 in and locking casters.
Pros
- Height adjusts from 15.4 to 20.5 in and distance from 15.7 to 26.4 in
- Two locking casters keep it steady when locked
- PU leather cushion, 16.9 by 13 by 3.9 in, with thick foam
- Pin-lock positions and adjustment knobs
Cons
- No warranty term is stated
- Office chair not included, and assembly is required
- Fits only chairs with an accessible center gas-lift column
- Mounting clamp needs surrounding space on the chair base
Detailed Review
BALAPET lists a footrest attachment that mounts to an office chair, with height from 15.4 to 20.5 in and distance from 15.7 to 26.4 in. The cushion is 16.9 by 13 by 3.9 in, with PU leather, thick foam and a reinforced internal support board. Two locking casters move when unlocked and hold steady when locked, and the rotating support arm repositions the rest. The listing states assembly is required, the office chair is not included, and the chair needs an accessible center gas-lift column.
Who it's for: a chair user who wants a footrest that mounts to the chair and moves with it. Who should skip it: anyone who wants a floor rest instead of a chair attachment.
Its Office Score of 9.6/10 comes from performance 29/35, build 21/25, value 20/25, safety 5/10 and warranty 0/5: 75 of 100 points, placed on our 9.2 to 9.8 scale.
Key Specifications
| Height | 15.4 to 20.5 in |
|---|---|
| Distance | 15.7 to 26.4 in |
| Cushion | 16.9 x 13 x 3.9 in |
| Casters | 2 locking |
Figures as published on the retailer listing, collected 10 November 2026. Performance figures are manufacturer rated.
Safety and Warranty
What this listing states. Two locking casters keep the footrest steady when locked, so safety scores 5 of 10. No warranty term, so warranty scores zero. See How We Pick.
Comfort, not treatment. Cushions, pillows, footrests and chair mats change how a desk feels; they are not medical devices. Check the size against your chair or floor and keep mats flat so casters do not catch.
This is general buying information, not professional advice. Follow each product manual and local rules, and see our Safety Disclaimer.

Snailax Foot Rest
An under-desk footrest with 3 graphene heat levels, 3 vibration modes, a gentle swing and a 1, 2 or 4-hour timer.
Pros
- 3 graphene heat levels and 3 vibration modes
- Gentle swing motion for long sitting hours
- 1H, 2H and 4H timer
- 2 heights, 3 and 4 in, with memory foam
Cons
- No warranty term is stated
- No weight capacity is stated
- Vacuum-packed, fully expands within 1 hour after opening
- Only 2 heights, 3 and 4 in, against six on the CasaZenith
Detailed Review
Snailax lists a footrest with 3 graphene heat levels, 3 vibration modes and a gentle swing motion, with 2 heights of 3 and 4 in. The timer runs 1, 2 or 4 hours, and the memory foam rest measures 10.83 by 15.35 by 3.54 in. The listing notes it arrives vacuum-packed and fully expands within 1 hour after opening.
Who it's for: a desk worker who wants heat, vibration and a timer under the desk. Who should skip it: anyone who wants an unpowered rest or a chair-mounted ring.
Its Office Score of 9.5/10 comes from performance 30/35, build 20/25, value 20/25, safety 4/10 and warranty 0/5: 74 of 100 points, placed on our 9.2 to 9.8 scale.
Key Specifications
| Heat | 3 graphene levels |
|---|---|
| Vibration | 3 modes |
| Timer | 1H, 2H, 4H |
| Size | 10.83 x 15.35 x 3.54 in |
Figures as published on the retailer listing, collected 10 November 2026. Performance figures are manufacturer rated.
Safety and Warranty
What this listing states. 1H / 2H / 4H timer is stated, so safety scores 4 of 10. No warranty term, so warranty scores zero. See How We Pick.
Comfort, not treatment. Cushions, pillows, footrests and chair mats change how a desk feels; they are not medical devices. Check the size against your chair or floor and keep mats flat so casters do not catch.
This is general buying information, not professional advice. Follow each product manual and local rules, and see our Safety Disclaimer.

Frassie Foot Rest Ring
A 17.7 in metal chrome footrest ring that clamps to a 2 in chair cylinder for a drafting chair.
Pros
- 17.7 in ring diameter, larger than the stool
- Fits a 2 in diameter chair cylinder, with a 2.1 in center hole
- Height-adjustable on the cylinder
- Metal chrome, scratch-resistant and sturdy
Cons
- No warranty term is stated
- No cushion or padding is stated
- Fits 2 in cylinders only, so measure before ordering
- Ring only, with no chair or stool included
Detailed Review
Frassie lists a 17.7 in metal chrome footrest ring for a studio drafting chair, with a 2.1 in center hole that fits a 2 in diameter chair cylinder. The ring is height-adjustable on the cylinder, and the listing describes a scratch-resistant, stable and sturdy metal build. The spec table gives a 17.7 by 17.7 by 2.0 in size and a 2.0 lb item weight.
Who it's for: a drafting chair user who wants a ring on the chair cylinder. Who should skip it: anyone whose chair cylinder is not 2 in in diameter.
Its Office Score of 9.4/10 comes from performance 28/35, build 20/25, value 21/25, safety 0/10 and warranty 0/5: 69 of 100 points, placed on our 9.2 to 9.8 scale.
Key Specifications
| Diameter | 17.7 in |
|---|---|
| Center hole | 2.1 in |
| Fits | 2 in cylinder |
| Item weight | 2.0 lb |
Figures as published on the retailer listing, collected 10 November 2026. Performance figures are manufacturer rated.
Safety and Warranty
What this listing states. This product does not plug in or run on a battery, so safety is not part of its score. No warranty term, so warranty scores zero. See How We Pick.
Comfort, not treatment. Cushions, pillows, footrests and chair mats change how a desk feels; they are not medical devices. Check the size against your chair or floor and keep mats flat so casters do not catch.
This is general buying information, not professional advice. Follow each product manual and local rules, and see our Safety Disclaimer.
As an Amazon Associate I earn from qualifying purchases.
More picks to compare
Rboiye Footrest Ring 17.7 in17.7 in steel ring fits a 2 in cylinder, tool-free installCheck on Amazon
LATIBELL Double Step Foot Rest5 heights, metal and wood build, dual cushioned padsCheck on Amazon- chairpartsonline Foot Rest Ring 20 in20 in chrome foot rest ring for a drafting stool or office chairCheck on Amazon
- Frassie Foot Rest Ring 15.7 in15.7 in metal chrome footrest ring for a studio drafting chairCheck on Amazon
Specs compared
| Footrest | Office Score | Height | Size | Material | Warranty | Amazon |
|---|---|---|---|---|---|---|
| CasaZenith Foot Rest | 9.6/10 | 3.1 to 7.3 in | 16.5 x 12.2 in | ABS | Not stated | View on Amazon |
| LUE BONA Foot Rest | 9.6/10 | 15.35 to 19.29 in | 16.93 x 12.6 in | Faux leather, foam | Not stated | View on Amazon |
| BALAPET Footrest Attachment | 9.6/10 | 15.4 to 20.5 in | 16.9 x 13 in | PU leather, foam | Not stated | View on Amazon |
| Snailax Foot Rest | 9.5/10 | 3 and 4 in | 10.83 x 15.35 in | Memory foam | Not stated | View on Amazon |
| Frassie Foot Rest Ring | 9.4/10 | Not stated | 17.7 in diameter | Metal chrome | Not stated | View on Amazon |
All numbers are the manufacturer’s stated specs, not measured in an office, pulled on 10 November 2026. None of the five state a warranty term, and four state a non-slip, locking or timer feature.
How to choose the best drafting chair foot rest
Start with the chair or the floor
A footrest ring clamps to the chair cylinder, so it moves with a drafting chair; the Frassie ring fits a 2 in diameter cylinder with a 2.1 in center hole. A chair attachment such as the BALAPET mounts to the chair and adjusts height and distance. A floor rest such as the CasaZenith, LUE BONA or Snailax sits under the desk and suits any chair. Measure the chair cylinder before ordering a ring, and check the desk clearance before choosing a floor rest.
Height range and how it adjusts
Height range is the number to compare first, and the five state it in different ways. The CasaZenith lists six heights from 3.1 to 7.3 in, set by rotating screws on both sides. The LUE BONA lists a range of 15.35 to 19.29 in, and the BALAPET lists 15.4 to 20.5 in with a distance range of 15.7 to 26.4 in. The Snailax lists two heights, 3 and 4 in, and the Frassie ring adjusts on the cylinder without a stated figure.
| Footrest | Height | Size | Material |
|---|---|---|---|
| CasaZenith Foot Rest | 3.1 to 7.3 in | 16.5 x 12.2 in | ABS |
| LUE BONA Foot Rest | 15.35 to 19.29 in | 16.93 x 12.6 in | Faux leather, foam |
| BALAPET Footrest Attachment | 15.4 to 20.5 in | 16.9 x 13 in | PU leather, foam |
| Snailax Foot Rest | 3 and 4 in | 10.83 x 15.35 in | Memory foam |
| Frassie Foot Rest Ring | Not stated | 17.7 in diameter | Metal chrome |
Figures as stated in each listing. A ring that adjusts on the cylinder suits a chair that moves up and down, while an under-desk footrest with set heights suits a desk that does not move.
Massage, heat and swing
Two of the five list extra features beyond height. The CasaZenith lists four massage rollers with a small-particle massage surface, and the Snailax lists 3 graphene heat levels, 3 vibration modes, a gentle swing and a timer of 1, 2 or 4 hours. For a cold room or a long session at a drafting chair for a standing desk, the heated rest is the one with more to offer.
Read the warranty line
None of the five state a warranty term, so the safety features carry the comparison instead. The CasaZenith lists non-slip pads, the LUE BONA lists anti-slip rubber strips, the BALAPET lists locking casters, and the Snailax lists a timer. Check those parts against the floor: a rest that slides on a hard floor is a rest that needs the pads or casters locked before use.
Setup Notes
- Measure the chair cylinder before ordering a ring: the Frassie ring fits a 2 in diameter cylinder with a 2.1 in center hole.
- Check the desk clearance against the rest size: the CasaZenith measures 16.5 by 12.2 in, and the Snailax measures 10.83 by 15.35 in.
- Set the height before a long session: the CasaZenith lists six heights from 3.1 to 7.3 in, and the BALAPET lists pin-lock positions for height and distance.
- Check assembly needs: the BALAPET states assembly is required, and the LUE BONA lists assembly in under 10 minutes with parts in the box.
FAQ
What size footrest ring fits a drafting chair?
Measure the chair lift cylinder first. The Frassie ring fits a 2 in diameter cylinder with a 2.1 in center hole, and the Rboiye ring in More picks fits the same 2 in cylinder.
Do drafting chair footrests attach to the chair?
Some do and some sit on the floor. The BALAPET mounts to the chair with a mounting clamp, the Frassie ring clamps to the gas-lift cylinder, and the CasaZenith, LUE BONA and Snailax sit on the floor under the desk.
What height should a footrest be?
It depends on the chair and the desk. The CasaZenith lists six heights from 3.1 to 7.3 in, the LUE BONA lists 15.35 to 19.29 in, and the BALAPET lists 15.4 to 20.5 in. Match the range to the chair height before ordering.
Which footrest has heat and massage?
The Snailax lists 3 graphene heat levels, 3 vibration modes and a gentle swing, and the CasaZenith lists four massage rollers with a small-particle massage surface.
Score breakdown
The Office Score weighs performance (height range, adjustment steps, massage or heat features and chair fit), build (material, cushion and stated size), value for the stated specs, safety and warranty. For a footrest, safety means stated non-slip pads, locking casters or a timer; the CasaZenith, LUE BONA and BALAPET state non-slip or locking parts, and the Snailax states a timer, while the Frassie ring states none. None of the five state a warranty term. How we pick explains the weights.
| Product | Office Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| CasaZenith Foot Rest | 9.6 | 30 | 21 | 21 | 5 | 0 |
| LUE BONA Foot Rest | 9.6 | 29 | 21 | 21 | 5 | 0 |
| BALAPET Footrest Attachment | 9.6 | 29 | 21 | 20 | 5 | 0 |
| Snailax Foot Rest | 9.5 | 30 | 20 | 20 | 4 | 0 |
| Frassie Foot Rest Ring | 9.4 | 28 | 20 | 21 | 0 | 0 |
We fit point totals onto a 9.2 low and 9.8 high in a straight line. One item can outscore another only by earning more points.
More for your workspace
See every office chair guide and all office chairs and seating guides. Also see our best drafting chair for home studio. Also see our best drafting chair for short person. Also see our best footrest under desk.
More picks: gaming chairs, seat cushions and lumbar pillows, standing desks.





