The handouts for the morning call sit in a stack beside the keyboard, and the best green hole punch turns them into binder-ready sheets without a trip to the supply closet. We compared green hole punches by sheet capacity, hole size, material, chip tray and warranty, using only what each listing publishes. A heavy duty binder punch leads for thick stacks, while single-hole punches suit cards, tags and craft paper.
OfficeKitHQ earns a commission when you buy through links on this page, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Affiliate disclosure.
Quick picks
Best Overall AFMAT HP17 3 Hole Punch: 40-sheet 3-hole punch with a large chip tray and adjustable paper guide Check price on Amazon
Best Single Hole Cgerma Single Hole Puncher: 1/4 inch single hole punch, 15 sheets, metal build with a lock Check price on Amazon
Best Handheld Aacehlh Circle Hole Puncher: 6.1 inch handheld circle punch with soft silicone handles Check price on Amazon
Best Craft Shapes Zonon 3 Pcs Shape Punchers: 3-piece set with round, heart and star hole shapes Check price on Amazon
Best with Ruler Enday 3 Hole Punch Green: 3-hole punch with a 10 inch built-in ruler and chip tray Check price on Amazon
Our desk picks
| # | Product | Office Score | Buy |
|---|---|---|---|
| 1 | AFMAT HP17 3 Hole Punch | 9.6/10 | Buy on Amazon |
| 2 | Cgerma Single Hole Puncher | 9.6/10 | Buy on Amazon |
| 3 | Aacehlh Circle Hole Puncher | 9.5/10 | Buy on Amazon |
| 4 | Zonon 3 Pcs Shape Punchers | 9.4/10 | Buy on Amazon |
| 5 | Enday 3 Hole Punch Green | 9.4/10 | Buy on Amazon |

AFMAT HP17 3 Hole Punch
A heavy duty 3-hole punch that cuts 40 sheets at a time with 9/32 inch holes, a large chip tray and an adjustable paper guide.
Pros
- Punches up to 40 sheets of 70 gsm paper at a time
- 50% reduced effort from the labor-saving lever structure
- Large chip tray holds cutouts so emptying is less frequent
- Adjustable paper guide and end stopper keep holes aligned
Cons
- Weighs 3.0 lb, which suits a single desk spot
- Three-hole layout only; it cannot punch a single hole
- Pins can stick when the punching slot fills with cutouts
- Clearing a stuck pin means opening the whole bottom cover
Detailed Review
AFMAT lists the HP17 as a heavy duty 3-hole punch that cuts up to 40 sheets of 70 gsm paper at a time with 9/32 inch holes. The labor-saving lever structure is stated to cut effort by 50%, and the adjustable paper guide with an end stopper keeps holes aligned. The large chip tray holds cutouts, and the spec table gives a 3.0 lb weight and a 1 year warranty. The bullets give 9.8 by 6.7 by 7.1 inches while the spec table gives 9.8 by 6.7 by 2.35 inches, and the bullets describe a classic black model while the spec table lists the color as Green.
Who it's for: someone who punches thick binder stacks and wants 40-sheet capacity with a large chip tray. Who should skip it: anyone who needs a single-hole punch or a punch that fits in a bag.
Its Office Score of 9.6/10 comes from performance 32/35, build 22/25, value 21/25, safety 0/10 and warranty 2/5: 77 of 100 points, placed on our 9.2 to 9.8 scale.
Key Specifications
| Sheet capacity | 40 sheets |
|---|---|
| Hole size | 9/32 in |
| Size | 9.8 x 6.7 x 7.1 in |
| Warranty | 1 year |
Figures as published on the retailer listing, collected 11 November 2026. Performance figures are manufacturer rated.
Safety and Warranty
What this listing states. This product does not plug in or run on a battery, so safety is not part of its score. 1 year. It does not say everything a buyer needs, such as who pays return shipping, so warranty scores 2 of 5. See How We Pick.
Shredder and printer safety. Keep hair, ties, jewelry, children and pets away from the feed slot, use the safety lock, unplug when not in use, and give printers and adapters room to vent.
This is general buying information, not professional advice. Follow each product manual and local rules, and see our Safety Disclaimer.

Cgerma Single Hole Puncher
A metal single-hole punch that cuts a 1/4 inch hole through 15 sheets, with a scrap-collecting base and a lock for storage.
Pros
- Punches through 15 sheets of paper, cardboard and cards
- U-shaped blade is stated to reduce effort by 50%
- Metal build with a coated surface
- Built-in lock mechanism for storage in a bag
Cons
- Single hole only; it cannot punch a 3-hole binder pattern
- No warranty term is stated
- 0.9 inch feed distance limits how far from the edge it punches
- Base cover must be opened to empty scraps
Detailed Review
Cgerma lists this single-hole punch as a heavy duty metal punch with a 1/4 inch hole and a 15-sheet capacity. The U-shaped blade is stated to reduce effort by 50%, and the maker states a capacity of up to 3000 punches. The base collects paper scraps and protects tables from blade scratches, and a built-in lock mechanism holds the punch closed for storage. The 0.9 inch feed distance sets how far from the edge the hole lands.
Who it's for: someone who punches ID cards, tickets and tags with a single hole and wants a metal punch that locks shut. Who should skip it: anyone who needs 3-hole binder punching or a stated warranty term.
Its Office Score of 9.6/10 comes from performance 29/35, build 21/25, value 21/25, safety 5/10 and warranty 0/5: 76 of 100 points, placed on our 9.2 to 9.8 scale.
Key Specifications
| Hole size | 1/4 in |
|---|---|
| Sheet capacity | 15 sheets |
| Punch capacity | Up to 3000 punches |
| Feed distance | 0.9 in |
Figures as published on the retailer listing, collected 11 November 2026. Performance figures are manufacturer rated.
Safety and Warranty
What this listing states. Built-in lock mechanism for storage, so safety scores 5 of 10. No warranty term, so warranty scores zero. See How We Pick.
Shredder and printer safety. Keep hair, ties, jewelry, children and pets away from the feed slot, use the safety lock, unplug when not in use, and give printers and adapters room to vent.
This is general buying information, not professional advice. Follow each product manual and local rules, and see our Safety Disclaimer.

Aacehlh Circle Hole Puncher
A handheld circle punch that cuts a 1/4 inch hole, with soft silicone handles and a small scrap container at the bottom.
Pros
- Soft silicone handles with a non-slip particle surface
- Alloy build stated as rustproof, crack-resistant and wear-resistant
- Small scrap container at the bottom keeps the desktop clean
- Punches holes anywhere in the paper, not just at the edge
Cons
- No sheet capacity is stated
- No warranty term is stated
- Handheld design needs hand pressure for each punch
- 6.1 inch length suits one hole at a time, not batch punching
Detailed Review
Aacehlh lists this handheld punch as a single-hole circle punch with a 1/4 inch hole and a length of about 6.1 inches. The alloy body is stated as rustproof, crack-resistant and wear-resistant, and the soft silicone handles carry a fine particle surface for grip. A small container at the bottom stores paper scraps, and the punch suits paper, greeting cards, scrapbooks, labels and decorative PVC cards.
Who it's for: someone who punches single holes in cards, tags and scrapbook paper by hand. Who should skip it: anyone who needs binder punching or a stated sheet capacity.
Its Office Score of 9.5/10 comes from performance 27/35, build 20/25, value 20/25, safety 3/10 and warranty 0/5: 70 of 100 points, placed on our 9.2 to 9.8 scale.
Key Specifications
| Hole size | 1/4 in |
|---|---|
| Length | About 6.1 in |
| Material | Alloy |
| Handles | Soft silicone |
Figures as published on the retailer listing, collected 11 November 2026. Performance figures are manufacturer rated.
Safety and Warranty
What this listing states. Soft silicone handles with a non-slip particle surface, so safety scores 3 of 10. No warranty term, so warranty scores zero. See How We Pick.
Shredder and printer safety. Keep hair, ties, jewelry, children and pets away from the feed slot, use the safety lock, unplug when not in use, and give printers and adapters room to vent.
This is general buying information, not professional advice. Follow each product manual and local rules, and see our Safety Disclaimer.

Zonon 3 Pcs Shape Punchers
A 3-piece set of single-hole punchers in round, heart and star shapes, with stainless steel bodies and rubber-covered handles.
Pros
- 3 pieces punch round, heart and star shaped holes
- Stainless steel bodies resist corrosion
- Rubber-covered handles for a comfortable grip
- Paper scraps store in a groove so the desktop stays clean
Cons
- Only one of the 3 pieces is green; the others are orange and yellow
- No sheet capacity is stated
- No warranty term is stated
- Each puncher measures about 6.20 by 2.95 by 0.59 inches, so it suits small tags
Detailed Review
Zonon lists this set as 3 single-hole punchers that cut round, heart and star shaped holes, each about 6.20 by 2.95 by 0.59 inches with a 1/4 inch hole. The metal bodies are stainless steel, and the handles are covered with rubber. Paper scraps store in a groove after punching, and the set suits paper, greeting cards, scrapbooks, tickets, tags and decorative PVC cards. Only one of the 3 pieces is green; the others are orange and yellow.
Who it's for: someone who punches decorative shaped holes in tags, tickets and scrapbook paper. Who should skip it: anyone who needs binder holes or a punch that is all green.
Its Office Score of 9.4/10 comes from performance 24/35, build 19/25, value 20/25, safety 4/10 and warranty 0/5: 67 of 100 points, placed on our 9.2 to 9.8 scale.
Key Specifications
| Pieces | 3 |
|---|---|
| Hole shapes | Round, heart, star |
| Hole size | 1/4 in |
| Size | 6.20 x 2.95 x 0.59 in |
Figures as published on the retailer listing, collected 11 November 2026. Performance figures are manufacturer rated.
Safety and Warranty
What this listing states. Rubber-covered handle to protect hands during use, so safety scores 4 of 10. No warranty term, so warranty scores zero. See How We Pick.
Shredder and printer safety. Keep hair, ties, jewelry, children and pets away from the feed slot, use the safety lock, unplug when not in use, and give printers and adapters room to vent.
This is general buying information, not professional advice. Follow each product manual and local rules, and see our Safety Disclaimer.

Enday 3 Hole Punch Green
A portable 3-hole punch in green with a 10 inch built-in ruler, a paper guide and a removable chip tray.
Pros
- 10 inch built-in ruler for quick measurement
- Stainless steel punching heads for clean, precise holes
- Removable chip tray keeps punches off the desk
- Built-in paper guide keeps sheets organized
Cons
- Title states a 3-sheet capacity while the specs state up to 5 sheets
- No warranty term is stated
- No item weight is stated
- 3-hole layout only; it cannot punch a single hole
Detailed Review
Enday lists this green 3-hole punch as a portable punch for a standard 3 ring binder with a 10 inch built-in ruler. The title states a 3-sheet capacity while the specs state up to 5 sheets at a time, and the bullets also describe a 2-hole design for 3 ring binders, which conflicts with the 3-hole title. The stainless steel punching heads are stated to deliver clean, neat and precise holes, and the removable chip tray catches paper punches. The punch comes in 6 colors, with green as the listed color here.
Who it's for: someone who wants a light 3-hole punch with a ruler for handouts and binder sheets. Who should skip it: anyone who punches thick stacks or wants the capacity stated without a conflict.
Its Office Score of 9.4/10 comes from performance 26/35, build 19/25, value 20/25, safety 0/10 and warranty 0/5: 65 of 100 points, placed on our 9.2 to 9.8 scale.
Key Specifications
| Holes | 3 |
|---|---|
| Hole size | 1/4 in |
| Ruler | 10 in |
| Chip tray | Removable |
Figures as published on the retailer listing, collected 11 November 2026. Performance figures are manufacturer rated.
Safety and Warranty
What this listing states. This product does not plug in or run on a battery, so safety is not part of its score. No warranty term, so warranty scores zero. See How We Pick.
Shredder and printer safety. Keep hair, ties, jewelry, children and pets away from the feed slot, use the safety lock, unplug when not in use, and give printers and adapters room to vent.
This is general buying information, not professional advice. Follow each product manual and local rules, and see our Safety Disclaimer.
As an Amazon Associate I earn from qualifying purchases.
More picks to compare
AFMAT HP14 3 Hole Punch40-sheet 3-hole punch with a large chip tray and paper guideCheck on Amazon
Aacehlh Triangle Hole PuncherHandheld triangle punch with soft silicone handles and a scrap containerCheck on Amazon
Knamoda Mini Hole PuncherMini single-hole punch with 10-sheet capacity and a storage bottom padCheck on Amazon
NIUBIER 2-Pack Hole Punch2 single-hole punches with soft grip handles and a scrap trayCheck on Amazon
AFMAT HPX2 3 Hole Punch40-sheet 3-hole punch with a large tray and an adjustable paper guideCheck on Amazon
Specs compared
| Hole Punch | Office Score | Holes | Sheet Capacity | Hole Size | Material | Warranty | Amazon |
|---|---|---|---|---|---|---|---|
| AFMAT HP17 3 Hole Punch | 9.6/10 | 3 | 40 sheets | 9/32 in | Metal | 1 year | View on Amazon |
| Cgerma Single Hole Puncher | 9.6/10 | 1 | 15 sheets | 1/4 in | Metal | Not stated | View on Amazon |
| Aacehlh Circle Hole Puncher | 9.5/10 | 1 | Not stated | 1/4 in | Alloy | Not stated | View on Amazon |
| Zonon 3 Pcs Shape Punchers | 9.4/10 | 1 per punch | Not stated | 1/4 in | Stainless steel | Not stated | View on Amazon |
| Enday 3 Hole Punch Green | 9.4/10 | 3 | 3 sheets | 1/4 in | Not stated | Not stated | View on Amazon |
All numbers are the manufacturer’s stated specs, not measured in an office, pulled on 11 November 2026. Only the AFMAT HP17 states a warranty term.
How to choose the best green hole punch
Start with sheet capacity
Sheet capacity is the first number to check, and it splits this group wide open. The AFMAT HP17 cuts up to 40 sheets of 70 gsm paper at a time, and the Cgerma cuts 15 sheets. The Enday title states a 3-sheet capacity while its specs state up to 5 sheets, so read its capacity as unsettled until the listing is corrected. The Aacehlh and Zonon listings state no sheet capacity at all, which leaves thick stacks unconfirmed for both. If most of your punching is a thick binder stack, the AFMAT is the only pick with a 40-sheet figure; if you punch a few sheets at a time, the Cgerma covers cards, tickets and tags with room to spare.
Three holes or one
The hole count decides what the punch is for. The AFMAT and the Enday cut 3 holes for a standard 3 ring binder, with the AFMAT adding an adjustable paper guide and an end stopper so each sheet lands in the same place. The Cgerma, Aacehlh and Zonon cut a single hole for ID cards, tickets, tags and craft paper. For shaped holes, our M shaped hole punch guide covers another craft shape.
Hole size and paper guides
Hole size is nearly uniform here: the AFMAT cuts 9/32 inch holes, and the Cgerma, Aacehlh, Zonon and Enday cut 1/4 inch holes. The difference that matters is the guide. The AFMAT pairs its 3 holes with an adjustable paper guide and an end stopper, and the Enday pairs its 3 holes with a built-in paper guide and a 10 inch ruler for quick measurement. A guide keeps each sheet in the same place, which matters most when a stack is punched in batches.
| Hole Punch | Sheet Capacity | Hole Size | Material |
|---|---|---|---|
| AFMAT HP17 3 Hole Punch | 40 sheets | 9/32 in | Metal |
| Cgerma Single Hole Puncher | 15 sheets | 1/4 in | Metal |
| Aacehlh Circle Hole Puncher | Not stated | 1/4 in | Alloy |
| Zonon 3 Pcs Shape Punchers | Not stated | 1/4 in | Stainless steel |
| Enday 3 Hole Punch Green | 3 sheets | 1/4 in | Not stated |
Figures as stated in each listing. Hole size is the diameter of the cut circle; a 9/32 inch hole gives a little more room on the ring than a 1/4 inch hole.
Chip trays and cleanup
Every punch here catches its own scraps somewhere, but the designs differ. The AFMAT has a large chip tray that rarely needs emptying, and the Enday has a removable chip tray that lifts out for disposal. The Cgerma base collects scraps and protects the table from blade scratches, the Aacehlh keeps a small container at the bottom, and the Zonon stores scraps in a groove after punching. If you punch at a shared desk, a tray that empties in one motion keeps the mess down; if you punch a few cards at a time, any of these catchers works.
Read the warranty line
Only one listing here states a warranty term. The AFMAT HP17 states 1 year, and the other listings state no warranty term. A punch is a simple tool with few parts to fail, but the term still matters when a lever or a pin wears out: the AFMAT is the only pick that puts a time on its cover. For craft punches, our decorative hole punch guide covers more single-hole options.
Setup Notes
- Measure the punch against the desk: the AFMAT spans 9.8 by 6.7 inches, so leave that footprint clear before a long run.
- Set the AFMAT end stopper and the Enday paper guide before punching a stack, so each sheet lands in the same place.
- Keep the Cgerma lock closed when the punch rides in a bag.
- Empty the chip tray or scrap container after a session so cutouts do not spill on the desk.
FAQ
How many sheets can the best green hole punch cut at once?
The AFMAT HP17 cuts up to 40 sheets at a time, and the Cgerma cuts 15 sheets. The Enday title states 3 sheets while its specs state up to 5 sheets, and the Aacehlh and Zonon listings state no sheet capacity.
What hole size do these green punches cut?
The AFMAT cuts 9/32 inch holes. The Cgerma, Aacehlh, Zonon and Enday cut 1/4 inch holes.
Which green hole punch has a chip tray?
The AFMAT has a large chip tray and the Enday has a removable chip tray. The Cgerma base collects scraps, the Aacehlh has a small container at the bottom, and the Zonon stores scraps in a groove.
Do any of these hole punches state a warranty?
Only the AFMAT HP17 states one, a 1 year term. The other listings state no warranty term.
Are all 3 Zonon punchers green?
No. Only one of the 3 pieces is green; the others are orange and yellow.
Score breakdown
The Office Score weighs performance (sheet capacity, hole size and hole count), build, value, safety and warranty. For a hole punch, safety means a lock mechanism, a rubber-covered handle or a non-slip grip on the listing; the Cgerma, Aacehlh and Zonon state one, the AFMAT and Enday do not. Only the AFMAT HP17 states a warranty term, 1 year. How we pick explains the weights.
| Product | Office Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| AFMAT HP17 3 Hole Punch | 9.6 | 32 | 22 | 21 | 0 | 2 |
| Cgerma Single Hole Puncher | 9.6 | 29 | 21 | 21 | 5 | 0 |
| Aacehlh Circle Hole Puncher | 9.5 | 27 | 20 | 20 | 3 | 0 |
| Zonon 3 Pcs Shape Punchers | 9.4 | 24 | 19 | 20 | 4 | 0 |
| Enday 3 Hole Punch Green | 9.4 | 26 | 19 | 20 | 0 | 0 |
We fit point totals onto a 9.2 low and 9.8 high in a straight line. One item can outscore another only by earning more points.
More for your workspace
See every Label Makers and Shredders guide and all Office Machines and Storage guides.
More picks: browse M shaped hole punches, label makers and heavy duty cross cut shredders.





