The best headphone amplifier for studio work feeds every listener in the room a clear mix at a volume each person controls, because a session falls apart when some headphones are too quiet and others are too loud. A morning call that doubles as a tracking session, a laptop running the whole setup off a hub, and a desk already crowded with cables all make the choice about fit, not features alone. We compared the headphone amplifiers below by channel count, headphone outputs, stated impedance range, power supply and warranty term, using only what each listing publishes.
OfficeKitHQ earns a commission when you buy through links on this page, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Affiliate disclosure.
Quick picks
Best Overall Bolanle PH800: 16 outputs, drives headphones up to 250 ohms Check price on Amazon
Best Bass Boost LZSIG LHA3: Bass boost, 8 channels, 32 to 100 ohm support Check price on Amazon
Best 8-Channel Spare COKYIS HA800S: 8 channels with mono stereo switching, 12 volt adapter Check price on Amazon
Best Stackable ART HeadAMP4: Stackable metal case, 8 outputs from 4 channels Check price on Amazon
Best Compact 4-Channel Behringer HA400: 4 channels, independent volume, 12 volt adapter included Check price on Amazon
Our desk picks
| # | Product | Office Score | Buy |
|---|---|---|---|
| 1 | Bolanle PH800 | 9.7/10 | Buy on Amazon |
| 2 | LZSIG LHA3 | 9.6/10 | Buy on Amazon |
| 3 | COKYIS HA800S | 9.5/10 | Buy on Amazon |
| 4 | ART HeadAMP4 | 9.5/10 | Buy on Amazon |
| 5 | Behringer HA400 | 9.4/10 | Buy on Amazon |

Bolanle PH800
An 8-channel amplifier with 16 headphone outputs that drives headphones up to 250 ohms, with a mono stereo switch and a 7-color LED volume knob.
Pros
- 16 headphone outputs: 8 at 3.5 mm and 8 at 6.35 mm
- Drives headphones up to 250 ohms, the highest stated here
- Mono stereo switch suits live checks and mixing sessions
- Metal housing with a DC 12V/2A safe power supply stated
Cons
- 9.45 in wide, the largest footprint in this group
- 1.21 lb item weight is the heaviest of the five
- No bass boost control is stated
- No aux input is stated for a second source
Detailed Review
Bolanle lists the PH800 as an 8-channel headphone amplifier with 16 outputs, 8 at 3.5 mm and 8 at 6.35 mm, that drives headphones up to 250 ohms. Each of the 16 outputs has its own volume control, a mono stereo switch changes the monitoring mode, and the volume knob carries a 7-color LED ring. It runs on a DC 12V/2A input with a safe power supply in a metal housing, and measures 9.45 by 3.07 by 0.98 in with a 1.21 lb item weight. A 1 year manufacturer warranty is stated.
Who it's for: a home studio that feeds many headphones at once, including high-impedance pairs. Who should skip it: anyone short on desk space who only needs a few outputs.
Its Office Score of 9.7/10 comes from performance 32/35, build 22/25, value 21/25, safety 8/10 and warranty 4/5: 87 of 100 points, placed on our 9.2 to 9.8 scale.
Key Specifications
| Channels | 8 |
|---|---|
| Headphone outputs | 16 |
| Impedance | Up to 250 ohms |
| Dimensions | 9.45 x 3.07 x 0.98 in |
These specs mirror the retailer listing as of 21 November 2026; performance figures are stated by the brand.
Safety and Warranty
What this listing states. Safe power supply with DC 12V/2A input is stated, so safety scores 8 of 10. 1 Year Manufacturer warranty. It does not say everything a buyer needs, such as who pays return shipping, so warranty scores 4 of 5. See How We Pick.
Protect your hearing. Keep volume moderate during long calls, take breaks, and treat noise cancelling and battery figures as the maker's claims.
This is general buying information, not professional advice. Follow each product manual and local rules, and see our Safety Disclaimer.

LZSIG LHA3
An 8-channel amplifier with bass boost, independent volume on every channel and a metal chassis, sized 4.13 by 2.95 by 0.98 in.
Pros
- Bass boost lifts the 400 to 600 Hz and 3000 to 7200 Hz bands
- 11 ROHM low-noise op amps are stated
- Supports headphones from 32 to 100 ohms with 50 mm drivers
- Metal chassis with heavy-duty knobs for desk or travel use
Cons
- 100 ohm ceiling leaves out high-impedance studio headphones
- No LED level indicator is stated
- Bass boost affects two fixed bands with no level control stated
- 8 channels share one stereo input, so no separate mixes are stated
Detailed Review
LZSIG lists the LHA3 as an 8-channel stereo headphone amplifier with one input and 8 outputs, independent volume on every channel and a bass boost switch. The boost lifts the 400 to 600 Hz and 3000 to 7200 Hz bands, and the amp supports headphones from 32 to 100 ohms with 50 mm drivers. The maker lists 11 ROHM low-noise op amps, a stereo mono switch, and 3.5 mm and 6.35 mm connections, with a metal chassis and heavy-duty knobs. It measures 4.13 by 2.95 by 0.98 in, with a 1 year manufacturer warranty.
Who it's for: a small studio that wants bass boost and a separate volume knob for each listener. Who should skip it: anyone driving headphones above 100 ohms.
Its Office Score of 9.6/10 comes from performance 30/35, build 21/25, value 21/25, safety 0/10 and warranty 4/5: 76 of 100 points, placed on our 9.2 to 9.8 scale.
Key Specifications
| Channels | 8 |
|---|---|
| Headphone outputs | 8 |
| Impedance | 32 to 100 ohms |
| Dimensions | 4.13 x 2.95 x 0.98 in |
These specs mirror the retailer listing as of 21 November 2026; performance figures are stated by the brand.
Safety and Warranty
What this listing states. This product does not plug in or run on a battery, so safety is not part of its score. 1 year manufacturer warranty. It does not say everything a buyer needs, such as who pays return shipping, so warranty scores 4 of 5. See How We Pick.
Protect your hearing. Keep volume moderate during long calls, take breaks, and treat noise cancelling and battery figures as the maker's claims.
This is general buying information, not professional advice. Follow each product manual and local rules, and see our Safety Disclaimer.

COKYIS HA800S
An 8-channel amplifier with independent volume on every channel, mono stereo buttons and an included 12 volt adapter.
Pros
- 8 independent channels, each with its own volume control
- Mono stereo buttons simulate stereo from a mono source
- DC 12 volt adapter is included for out-of-box use
- 1 year manufacturer warranty is stated
Cons
- No impedance range is stated for matching headphones
- No bass boost or tone control is stated
- 7.87 in length needs more desk depth than the LZSIG
- No LED indicator is stated for channel status
Detailed Review
COKYIS lists the HA800S as an 8-channel headphone amplifier that connects up to 8 headphones at once, each with its own volume control. Mono stereo buttons switch the source, and the maker lists ultra-low noise at maximum volume with a DC 12 volt adapter included. It measures 2.76 by 0.98 by 7.87 in, with a 1 year manufacturer warranty. The maker gives two item counts, 1 and 60; check before ordering.
Who it's for: a studio that needs eight separate volume knobs and mono stereo switching. Who should skip it: anyone who needs a stated impedance range for high-impedance headphones.
Its Office Score of 9.5/10 comes from performance 28/35, build 20/25, value 20/25, safety 0/10 and warranty 4/5: 72 of 100 points, placed on our 9.2 to 9.8 scale.
Key Specifications
| Channels | 8 |
|---|---|
| Headphone outputs | 8 |
| Dimensions | 2.76 x 0.98 x 7.87 in |
| Power | DC 12 volt adapter included |
These specs mirror the retailer listing as of 21 November 2026; performance figures are stated by the brand.
Safety and Warranty
What this listing states. No volume limit or safety listing is stated, so safety scores zero. 1 Year Manufacturer warranty. It does not say everything a buyer needs, such as who pays return shipping, so warranty scores 4 of 5. See How We Pick.
Protect your hearing. Keep volume moderate during long calls, take breaks, and treat noise cancelling and battery figures as the maker's claims.
This is general buying information, not professional advice. Follow each product manual and local rules, and see our Safety Disclaimer.

ART HeadAMP4
A 4-channel amplifier with 8 outputs, 1/8 in and 1/4 in connections and a stackable metal case for a home or project studio.
Pros
- 8 outputs from 4 channels feed more listeners than a 4-output amp
- Stackable metal case suits a growing rack of studio gear
- 1/8 in and 1/4 in inputs and outputs cover common plugs
- Lower noise and distortion with more output are stated
Cons
- No warranty term is stated
- No impedance range is stated for matching headphones
- No power supply detail is stated
- No mono stereo switch is stated
Detailed Review
ART lists the HeadAMP4 as an 8-output, 4-channel stereo headphone amplifier with 1/8 in and 1/4 in inputs and outputs. The maker lists lower noise, lower distortion and more output, in a custom extruded stackable metal case suited to a home or project studio. It weighs 1.1 lb. No warranty term is stated.
Who it's for: a project studio that wants eight outputs in a stackable case. Who should skip it: anyone who wants a stated warranty term or impedance range.
Its Office Score of 9.5/10 comes from performance 29/35, build 21/25, value 20/25, safety 0/10 and warranty 0/5: 70 of 100 points, placed on our 9.2 to 9.8 scale.
Key Specifications
| Channels | 4 |
|---|---|
| Headphone outputs | 8 |
| Dimensions | 4.61 x 4.09 x 1.85 in |
| Item weight | 1.1 lb |
These specs mirror the retailer listing as of 21 November 2026; performance figures are stated by the brand.
Safety and Warranty
What this listing states. This product does not plug in or run on a battery, so safety is not part of its score. No warranty term, so warranty scores zero. See How We Pick.
Protect your hearing. Keep volume moderate during long calls, take breaks, and treat noise cancelling and battery figures as the maker's claims.
This is general buying information, not professional advice. Follow each product manual and local rules, and see our Safety Disclaimer.

Behringer HA400
A compact 4-channel amplifier with a volume control on every channel, ultra low-noise op amps and an included 12 volt adapter.
Pros
- High-power stereo amplifiers are stated to hold quality at maximum volume
- Ultra low-noise 4580 op amps are stated
- 12 volt DC adapter is included
- 0.82 lb item weight is the lightest of the five
Cons
- No warranty term is stated
- 4 outputs feed fewer listeners than the 8-channel picks
- No mono stereo switch is stated
- No impedance range is stated for matching headphones
Detailed Review
Behringer lists the HA400 as an ultra-compact 4-channel stereo headphone amplifier that powers up to 4 pairs of headphones, each with its own volume control. The maker lists 4 high-power stereo amplifiers with ultra low-noise 4580 op amps, and a 12 volt DC adapter is included. It measures 4.08 by 2.25 by 1.83 in and weighs 0.82 lb. No warranty term is stated.
Who it's for: a small session with up to four listeners who want their own volume knob. Who should skip it: anyone feeding more than four pairs of headphones.
Its Office Score of 9.4/10 comes from performance 28/35, build 20/25, value 21/25, safety 0/10 and warranty 0/5: 69 of 100 points, placed on our 9.2 to 9.8 scale.
Key Specifications
| Channels | 4 |
|---|---|
| Headphone outputs | 4 |
| Dimensions | 4.08 x 2.25 x 1.83 in |
| Item weight | 0.82 lb |
These specs mirror the retailer listing as of 21 November 2026; performance figures are stated by the brand.
Safety and Warranty
What this listing states. No volume limit or safety listing is stated, so safety scores zero. No warranty term, so warranty scores zero. See How We Pick.
Protect your hearing. Keep volume moderate during long calls, take breaks, and treat noise cancelling and battery figures as the maker's claims.
This is general buying information, not professional advice. Follow each product manual and local rules, and see our Safety Disclaimer.
As an Amazon Associate I earn from qualifying purchases.
More picks to compare
Bolanle PH8000Rackmount 8-channel amp driving headphones from 32 to 600 ohms.Check on Amazon
PreSonus HP4Four-channel amp with 130 mW per channel and monitor mute.Check on Amazon
Mackie HM-400Rackmount amp with 12 headphone outputs across four channels.Check on Amazon
StudioMan HPA1800Rackmount 8-channel amp for headphones from 16 to 600 ohms.Check on Amazon
SinLoon HA400Compact 4-channel metal amp for headphones from 32 to 100 ohms.Check on Amazon
Specs compared
| Headphone amplifier | Office Score | Channels | Headphone outputs | Impedance | Warranty | Amazon |
|---|---|---|---|---|---|---|
| Bolanle PH800 | 9.7/10 | 8 | 16 | Up to 250 ohms | 1 year | View on Amazon |
| LZSIG LHA3 | 9.6/10 | 8 | 8 | 32 to 100 ohms | 1 year | View on Amazon |
| COKYIS HA800S | 9.5/10 | 8 | 8 | Not stated | 1 year | View on Amazon |
| ART HeadAMP4 | 9.5/10 | 4 | 8 | Not stated | Not stated | View on Amazon |
| Behringer HA400 | 9.4/10 | 4 | 4 | Not stated | Not stated | View on Amazon |
Specs reflect manufacturer claims on each product listing (as of 21 November 2026). Three of the five state a warranty term; one states a safe power supply.
How to choose the best headphone amplifier for studio
Count the headphones first
Channel count decides how many listeners can join a session. The Bolanle PH800 leads with 16 outputs, the LZSIG LHA3 and the COKYIS HA800S each offer 8, and the ART HeadAMP4 offers 8 outputs from 4 channels while the Behringer HA400 offers 4. Match the output count to the largest session the room hosts, then check the impedance range against the headphones already on the desk.
| Amplifier | Channels | Headphone outputs | Impedance |
|---|---|---|---|
| Bolanle PH800 | 8 | 16 | Up to 250 ohms |
| LZSIG LHA3 | 8 | 8 | 32 to 100 ohms |
| COKYIS HA800S | 8 | 8 | Not stated |
| ART HeadAMP4 | 4 | 8 | Not stated |
| Behringer HA400 | 4 | 4 | Not stated |
Figures as stated in each listing. Impedance is the headphone range the maker states the amplifier drives; where no range is stated, check the maker page before ordering high-impedance headphones.
Match the impedance range
Impedance decides whether an amplifier can drive the headphones already on the desk. The Bolanle PH800 states drive up to 250 ohms, which covers the high-impedance studio pairs named in its listing, including the Audio-Technica ATH-M50x, Sony MDR-7506 and Beyerdynamic DT series, while the LZSIG LHA3 states 32 to 100 ohms. The COKYIS, ART and Behringer state no impedance range, so a buyer with high-impedance headphones has no stated figure to check against. Check the headphone rating against the amplifier range before ordering.
Check the power supply and plugs
Four of the five list a 12 volt supply: the LZSIG includes a power adapter, the Bolanle states a DC 12V/2A input, and the Behringer and COKYIS each include a 12 volt adapter. The ART states no power supply detail, so confirm what ships in the box before ordering. On plugs, the LZSIG and Bolanle state both 3.5 mm and 6.35 mm connections, and the ART states 1/8 in and 1/4 in inputs and outputs. Leave room on the desk for the adapter and the cable run back to the audio interface or mixer.
Read the warranty line
Three listings state a 1 year manufacturer warranty: the LZSIG, the Bolanle and the COKYIS. The ART and the Behringer state no warranty term, so a buyer who wants a stated term should weigh that against the other features. A warranty term is a promise about the unit itself, not about the headphones plugged into it.
Setup Notes
- Measure the desk space first: the Bolanle is 9.45 in wide, the COKYIS is 7.87 in long, and the LZSIG is 4.13 in wide, so each needs a different footprint.
- Place the amplifier within reach of the 12 volt adapter and the audio interface or mixer it connects to, with room for the headphone cables.
- Check every headphone plug against the stated connections: 3.5 mm and 6.35 mm on the LZSIG and Bolanle, 1/8 in and 1/4 in on the ART.
- No assembly steps are stated for these amplifiers; check what ships in the box before ordering.
FAQ
Which of these amplifiers drives the highest stated headphone impedance?
The Bolanle PH800 states drive up to 250 ohms. The LZSIG LHA3 states 32 to 100 ohms, and the COKYIS, ART and Behringer state no impedance range.
How many headphones can each amplifier feed at once?
The Bolanle feeds up to 16, the LZSIG and the COKYIS feed up to 8 each, the ART feeds up to 8 from 4 channels, and the Behringer feeds up to 4.
Do these amplifiers include a power adapter?
The LZSIG includes a power adapter, and the Behringer and COKYIS each include a 12 volt adapter. The Bolanle states a DC 12V/2A input, and the ART states no power supply detail.
What does the bass boost on the LZSIG LHA3 do?
Pressing the bass boost switch lifts the 400 to 600 Hz and 3000 to 7200 Hz bands, which the maker says increases the intensity of vocals and bass. Each channel outputs the effect, so every listener hears it.
Which amplifiers state a warranty term?
The LZSIG, the Bolanle and the COKYIS each state a 1 year manufacturer warranty. The ART and the Behringer state no warranty term.
Score breakdown
The Office Score weighs performance (channel count, headphone outputs, stated impedance range and low-noise circuitry), build (metal chassis, housing and item weight), value for the stated specs, safety and warranty. For a headphone amplifier, safety means a stated safe power supply or overload protection on the listing; the Bolanle states a safe power supply, the other four do not. Three listings state a warranty term: the LZSIG, the Bolanle and the COKYIS each state 1 year. How we pick explains the weights.
| Product | Office Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| Bolanle PH800 | 9.7 | 32 | 22 | 21 | 8 | 4 |
| LZSIG LHA3 | 9.6 | 30 | 21 | 21 | 0 | 4 |
| COKYIS HA800S | 9.5 | 28 | 20 | 20 | 0 | 4 |
| ART HeadAMP4 | 9.5 | 29 | 21 | 20 | 0 | 0 |
| Behringer HA400 | 9.4 | 28 | 20 | 21 | 0 | 0 |
The scale opens at 9.2 and closes at 9.8; between those marks, weighted points translate linearly into the score you see.
More for your workspace
See every headset guide and all connectivity guides. Also see our best headphone splitter for studio. Also see our best studio headphones for beginners. Also see our best headphone amplifier for mixing. Also see our best audio interface for daw.
More picks: best headphone amplifier for mixing, best headphone amplifier for pc, best studio headphones for podcasting.





