A desk covered in loose label rolls turns a quick shipping run into a hunt through tangled paper, and the best holder for label rolls is the stand that keeps the roll feeding straight while the printer stays put. This article compares holders that support roll and fan-fold labels, by stated roll diameter, fan-fold size, holder size, assembly and warranty term, using only what each listing publishes. Some holders also store the printer itself, while others are a simple stand for the roll, so the right pick depends on how much desk space the printer and the roll together should occupy. The picks below cover metal and plastic stands, with and without a drawer, for home, office and warehouse desks.
OfficeKitHQ earns a commission when you buy through links on this page, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Affiliate disclosure.
Quick picks
Best Overall MUNBYN 3-in-1 Holder: Stores printer and labels, 9.45 x 6.29 x 6.65 in, 12 months stated Check price on Amazon
Best Metal Pick Marbrasse Metal Holder: Metal holder with drawer, 30 pounds stated, 4 adjustable feet Check price on Amazon
Longest Warranty PONNOR Label Holder: 2 year stated, 7 in roll diameter, 7.3 x 4.3 in fan-fold Check price on Amazon
Best Compact MUNBYN ILH01 Holder: 7.4 x 5.62 x 5.47 in, 5 parts, cords pass beneath Check price on Amazon
Best Portable Size Jiose 4×6 Holder: 8.8 x 5.4 x 6.4 in, 7 in roll diameter, 1 minute assembly Check price on Amazon
Our desk picks
| # | Product | Office Score | Buy |
|---|---|---|---|
| 1 | MUNBYN 3-in-1 Holder | 9.7/10 | Buy on Amazon |
| 2 | Marbrasse Metal Holder | 9.7/10 | Buy on Amazon |
| 3 | PONNOR Label Holder | 9.6/10 | Buy on Amazon |
| 4 | MUNBYN ILH01 Holder | 9.4/10 | Buy on Amazon |
| 5 | Jiose 4x6 Holder | 9.4/10 | Buy on Amazon |

MUNBYN 3-in-1 Holder
A double-layer holder that stores the printer and the labels together, with cord holes on both sides of the upper layer.
Pros
- Stores the printer and the labels in one double-layer stand.
- Upper layer holes on both sides hide the power cord.
- Assembly uses 4 main parts in 2 simple steps, per the listing.
- Stated size of 9.45 x 6.29 x 6.65 in fits a desktop shipping station.
Cons
- Stated load limit of 8.8 lb is lower than the metal holder here.
- No maximum roll diameter is stated on the listing.
- No maximum fan-fold size is stated separately from 4x6 labels.
- Double-layer stand takes more vertical space than a simple roll stand.
Detailed Review
The listing states a 3-in-1 holder that stores the printer and labels, with a double-layer structure, a size of 9.45 x 6.29 x 6.65 in, a load limit of 8.8 lb, and a 12 months warranty. The maker claims the design frees up to 65% of desktop space. The spec table lists different dimensions from the bullets, so this review trusts the bullets and the title over the spec table, per the site rule for contradictions.
Who it's for: a home office or shipping station where the printer and the roll should sit in one stand. Who should skip it: a buyer who only needs a simple roll stand, or who needs a stated roll diameter.
Its Office Score of 9.7/10 comes from performance 32/35, build 21/25, value 21/25, safety 7/10 and warranty 3/5: 84 of 100 points, placed on our 9.2 to 9.8 scale.
Key Specifications
| Holder size | 9.45 x 6.29 x 6.65 in |
|---|---|
| Label size | 4x6 shipping labels |
| Load limit | 8.8 lb |
| Warranty | 12 months |
Figures as published on the retailer listing, collected 2 November 2026. Performance figures are manufacturer rated.
Safety and Warranty
What this listing states. Bottom plastic feet pad stated, with a stated load limit of 8.8 lb, so safety scores 7 of 10. 12 months. It does not say everything a buyer needs, such as who pays return shipping, so warranty scores 3 of 5. See How We Pick.
Anchor it. Anchor tall bookshelves and file cabinets to the wall with the supplied hardware or an anti-tip kit, load the lowest shelves and drawers first, and open one drawer at a time.
This is general buying information, not professional advice. Follow each product manual and local rules, and see our Safety Disclaimer.

Marbrasse Metal Holder
A metal double-layer holder with a removable drawer at the bottom and four adjustable feet for stability.
Pros
- Metal construction with a removable drawer for office supplies.
- Stated load limit of 30 pounds, the highest stated here.
- Four adjustable feet at the bottom for stability.
- Double-layer design keeps the printer and labels within reach.
Cons
- No warranty term is stated on the listing.
- No maximum roll diameter is stated on the listing.
- Stated size of 12 x 8 x 10.2 in is the largest holder here.
- Assembly tip requires leveling the shelf before fully tightening screws.
Detailed Review
The listing states a metal holder with a removable drawer, four adjustable feet, a load limit of 30 pounds, and a size of 12 x 8 x 10.2 in, for rolls and fanfold labels, with clear installation instructions included. The listing states compatibility with many brands of thermal label printers, and a response time of 24 hours for questions, which is a service claim rather than a holder specification.
Who it's for: a warehouse, office or home desk that needs a sturdy metal stand with drawer storage. Who should skip it: a buyer who needs a compact stand, or a stated warranty term.
Its Office Score of 9.7/10 comes from performance 30/35, build 22/25, value 20/25, safety 9/10 and warranty 0/5: 81 of 100 points, placed on our 9.2 to 9.8 scale.
Key Specifications
| Holder size | 12 x 8 x 10.2 in |
|---|---|
| Material | Metal |
| Load limit | 30 pounds |
| Storage | Removable drawer |
Figures as published on the retailer listing, collected 2 November 2026. Performance figures are manufacturer rated.
Safety and Warranty
What this listing states. Four adjustable feet stated, with a stated load limit of 30 pounds, so safety scores 9 of 10. No warranty term, so warranty scores zero. See How We Pick.
Anchor it. Anchor tall bookshelves and file cabinets to the wall with the supplied hardware or an anti-tip kit, load the lowest shelves and drawers first, and open one drawer at a time.
This is general buying information, not professional advice. Follow each product manual and local rules, and see our Safety Disclaimer.

PONNOR Label Holder
A compact black holder for roll and fan-fold labels, with a stated 2 year warranty and a power cable route under the stand.
Pros
- Maximum roll diameter of 7 in, tied for the largest stated here.
- Maximum fan-fold size of 7.3 x 4.3 in stated on the listing.
- Assembly uses 5 parts and takes 1 minute, per the listing.
- Stated warranty of 2 year, the longest term stated here.
Cons
- No feet or load limit is stated on the listing.
- Compact size of 8 x 5.5 x 6 in still needs desk space beside the printer.
- Holder does not store the printer itself, only the labels.
- No color choice is stated beyond black on the listing.
Detailed Review
The listing states a holder for roll and fan-fold labels, with a maximum roll diameter of 7 in, a maximum fan-fold size of 7.3 x 4.3 in, a size of 8 x 5.5 x 6 in, assembly from 5 parts in 1 minute, a power cable route under the stand, and a 2 year warranty. The bullet size and the spec table size agree on this listing.
Who it's for: a small business or home office that prints roll and fan-fold labels and wants a stated warranty. Who should skip it: a buyer who wants the printer stored on the same stand, or stated feet for stability.
Its Office Score of 9.6/10 comes from performance 30/35, build 20/25, value 21/25, safety 0/10 and warranty 4/5: 75 of 100 points, placed on our 9.2 to 9.8 scale.
Key Specifications
| Holder size | 8 x 5.5 x 6 in |
|---|---|
| Max roll diameter | 7 in |
| Max fan-fold size | 7.3 x 4.3 in |
| Warranty | 2 year |
Figures as published on the retailer listing, collected 2 November 2026. Performance figures are manufacturer rated.
Safety and Warranty
What this listing states. This product does not plug in or run on a battery, so safety is not part of its score. 2 year. It does not say everything a buyer needs, such as who pays return shipping, so warranty scores 4 of 5. See How We Pick.
Anchor it. Anchor tall bookshelves and file cabinets to the wall with the supplied hardware or an anti-tip kit, load the lowest shelves and drawers first, and open one drawer at a time.
This is general buying information, not professional advice. Follow each product manual and local rules, and see our Safety Disclaimer.

MUNBYN ILH01 Holder
A compact black holder for rolls and fan-fold labels, with a taller base that lets printer cords pass beneath the stand.
Pros
- Compact stated size of 7.4 x 5.62 x 5.47 in for a small desk.
- Maximum label width of 4.76 in stated, with a minimum inner core of 0.74 in.
- Assembly and disassembly use only 5 parts, per the listing.
- Taller base lets printer cords pass beneath the stand.
Cons
- Maximum roll diameter of 6 in is smaller than the 7 in holders here.
- No warranty term is stated on this listing.
- No feet or load limit is stated on the listing.
- No maximum fan-fold size is stated separately on the listing.
Detailed Review
The listing states a holder for rolls and fan-fold labels, with a maximum label width of 4.76 in, a maximum outer label diameter of 6 in, a minimum inner core size of 0.74 in, 5 parts for assembly, and a size of 7.4 x 5.62 x 5.47 in. The spec table lists different dimensions from the bullets, so this review trusts the bullets and the title over the spec table, per the site rule for contradictions.
Who it's for: a small desk that prints rolls up to 6 in in diameter and needs cord space beneath the stand. Who should skip it: a buyer who prints larger rolls, or who needs a stated warranty term.
Its Office Score of 9.4/10 comes from performance 29/35, build 20/25, value 20/25, safety 0/10 and warranty 0/5: 69 of 100 points, placed on our 9.2 to 9.8 scale.
Key Specifications
| Holder size | 7.4 x 5.62 x 5.47 in |
|---|---|
| Max roll diameter | 6 in |
| Max label width | 4.76 in |
| Min inner core | 0.74 in |
Figures as published on the retailer listing, collected 2 November 2026. Performance figures are manufacturer rated.
Safety and Warranty
What this listing states. This product does not plug in or run on a battery, so safety is not part of its score. No warranty term, so warranty scores zero. See How We Pick.
Anchor it. Anchor tall bookshelves and file cabinets to the wall with the supplied hardware or an anti-tip kit, load the lowest shelves and drawers first, and open one drawer at a time.
This is general buying information, not professional advice. Follow each product manual and local rules, and see our Safety Disclaimer.

Jiose 4x6 Holder
A portable black holder for roll and fan-fold labels, assembled in 1 minute per the listing.
Pros
- Maximum roll diameter of 7 in, tied for the largest stated here.
- Maximum fan-fold size of 7 x 4.1 in stated on the listing.
- Assembly takes 1 minute, per the listing, with an assembly guide.
- Portable stated size of 8.8 x 5.4 x 6.4 in for moving between desks.
Cons
- No warranty term is stated on the listing.
- No feet or load limit is stated on the listing.
- No printer storage is stated, only roll and fan-fold label support.
Detailed Review
The listing states a holder for roll and fan-fold labels, with a maximum roll diameter of 7 in, a maximum fan-fold size of 7 x 4.1 in, assembly in 1 minute, and a portable size of 8.8 x 5.4 x 6.4 in in the bullets. The spec table lists a different size from the bullets, so this review trusts the bullets and the title over the spec table, per the site rule for contradictions.
Who it's for: a desk that needs a portable stand for 4x6 labels in roll or fan-fold form. Who should skip it: a buyer who needs a stated warranty term, or printer storage on the same stand.
Its Office Score of 9.4/10 comes from performance 28/35, build 20/25, value 20/25, safety 0/10 and warranty 0/5: 68 of 100 points, placed on our 9.2 to 9.8 scale.
Key Specifications
| Holder size | 8.8 x 5.4 x 6.4 in |
|---|---|
| Max roll diameter | 7 in |
| Max fan-fold size | 7 x 4.1 in |
| Color | Black |
Figures as published on the retailer listing, collected 2 November 2026. Performance figures are manufacturer rated.
Safety and Warranty
What this listing states. This product does not plug in or run on a battery, so safety is not part of its score. No warranty term, so warranty scores zero. See How We Pick.
Anchor it. Anchor tall bookshelves and file cabinets to the wall with the supplied hardware or an anti-tip kit, load the lowest shelves and drawers first, and open one drawer at a time.
This is general buying information, not professional advice. Follow each product manual and local rules, and see our Safety Disclaimer.
As an Amazon Associate I earn from qualifying purchases.
More picks to compare
MUNBYN ILH01 White HolderWhite holder for rolls and fan-fold labels, with a 1 year warranty stated.Check on Amazon
Jiose 4×6 Pink HolderPink holder for rolls and fan-fold labels, with a 7 in roll diameter stated.Check on Amazon
Sutter Signs Acrylic HolderAcrylic holder with rubber feet and spacer springs for various roll sizes.Check on Amazon
Specs compared
| Label holder | Office Score | Max roll diameter | Fan-fold max | Holder size | Assembly | Warranty | Amazon |
|---|---|---|---|---|---|---|---|
| MUNBYN 3-in-1 Holder | 9.7/10 | Not stated | Not stated | 9.45 x 6.29 x 6.65 in | 2 steps, 4 parts | 12 months | View on Amazon |
| Marbrasse Metal Holder | 9.7/10 | Not stated | Not stated | 12 x 8 x 10.2 in | Instructions included | Not stated | View on Amazon |
| PONNOR Label Holder | 9.6/10 | 7 in | 7.3 x 4.3 in | 8 x 5.5 x 6 in | 5 parts, 1 minute | 2 year | View on Amazon |
| MUNBYN ILH01 Holder | 9.4/10 | 6 in | Not stated | 7.4 x 5.62 x 5.47 in | 5 parts | Not stated | View on Amazon |
| Jiose 4×6 Holder | 9.4/10 | 7 in | 7 x 4.1 in | 8.8 x 5.4 x 6.4 in | 1 minute | Not stated |
All numbers are the manufacturer’s stated specs, not measured in an office, pulled on 2 November 2026. Two listings state a warranty term, and two holders state feet or a stated load limit.
How to choose the best holder for label rolls
Start with roll diameter and fan-fold size
Roll diameter is the first figure to check, because a roll that is too wide for the stand will not sit in it at all. PONNOR and Jiose both state a maximum roll diameter of 7 in, while the MUNBYN ILH01 states 6 in, with a maximum label width of 4.76 in and a minimum inner core of 0.74 in. For fan-fold labels, PONNOR states 7.3 x 4.3 in and Jiose states 7 x 4.1 in, while the MUNBYN 3-in-1 is described for 4×6 shipping labels and the Marbrasse states no maximum size at all, only that it fits rolls and fanfold labels. Check the roll in hand against both figures, not just the label width, before buying.
Measure the holder against the desk
Holder size matters as much as roll size, because a stand that crowds the printer makes every label change awkward. The Marbrasse at 12 x 8 x 10.2 in is the largest holder here, followed by the MUNBYN 3-in-1 at 9.45 x 6.29 x 6.65 in, Jiose at 8.8 x 5.4 x 6.4 in, PONNOR at 8 x 5.5 x 6 in, and the MUNBYN ILH01 at 7.4 x 5.62 x 5.47 in. A smaller holder suits a tight desk, but a larger holder can carry the printer as well, which changes the desk math completely. Browse office storage guides for stands that sit beside printers and filing gear.
| Holder | Holder size | Assembly |
|---|---|---|
| MUNBYN 3-in-1 Holder | 9.45 x 6.29 x 6.65 in | 2 steps, 4 parts |
| Marbrasse Metal Holder | 12 x 8 x 10.2 in | Instructions included |
| PONNOR Label Holder | 8 x 5.5 x 6 in | 5 parts, 1 minute |
| MUNBYN ILH01 Holder | 7.4 x 5.62 x 5.47 in | 5 parts |
| Jiose 4×6 Holder | 8.8 x 5.4 x 6.4 in | 1 minute |
Figures as stated in each listing. Where a listing gives two sizes, the bullet size is used here, since the site rule trusts the title and bullets over the spec table.
Decide whether the printer sits on the holder
Two holders here are built to carry the printer as well as the labels, and the rest are label stands only. The MUNBYN 3-in-1 stores the printer and the labels in a double-layer stand, with cord holes on both sides of the upper layer, and the maker claims the design frees up to 65% of desktop space. The Marbrasse uses a double-layer design that keeps the printer and labels organized, plus a removable drawer for office supplies. If the printer already has a fixed home, a simple stand such as PONNOR, Jiose or the MUNBYN ILH01 leaves the printer where it is and only manages the roll. See label makers and shredders guides for printer-side gear.
Read the warranty line, not the headline
Only two listings here state a warranty term in concrete form, and the rest state none, so the warranty line is worth reading before the headline claims. PONNOR states 2 year and the MUNBYN 3-in-1 states 12 months, while Marbrasse, Jiose and the MUNBYN ILH01 state no warranty term on their listings. A stated term is reported here exactly as the listing gives it, and an unstated term is not treated as a promise. For other desk gear, browse desk organizers and whiteboards guides.
Setup Notes
- Measure the roll diameter first: PONNOR and Jiose state 7 in, while the MUNBYN ILH01 states 6 in.
- Measure the holder against the desk: Marbrasse states 12 x 8 x 10.2 in, and the MUNBYN ILH01 states 7.4 x 5.62 x 5.47 in.
- Plan the power cord route: the MUNBYN 3-in-1 has cord holes on both sides, PONNOR routes the cable under the stand, and the MUNBYN ILH01 lets cords pass beneath its taller base.
- Count the parts before assembly: PONNOR and the MUNBYN ILH01 use 5 parts, and the MUNBYN 3-in-1 uses 4 main parts in 2 steps.
- Respect the stated load limit: Marbrasse states 30 pounds, and the MUNBYN 3-in-1 states 8.8 lb.
FAQ
Which holder stores the printer as well as the labels?
The MUNBYN 3-in-1 stores the printer and the labels in one double-layer stand, and the Marbrasse double-layer design also keeps the printer and labels organized, with a removable drawer.
Which holder has the largest stated roll diameter?
PONNOR and Jiose both state a maximum roll diameter of 7 in, while the MUNBYN ILH01 states 6 in, and the other two holders state no maximum roll diameter.
Which holders state a warranty term?
PONNOR states 2 year and the MUNBYN 3-in-1 states 12 months, while Marbrasse, Jiose and the MUNBYN ILH01 state no warranty term on their listings.
Does any holder have a drawer?
Yes, the Marbrasse holder has a removable drawer at the bottom for office supplies such as labels and other items, per the listing.
Which holder lists metal construction?
The Marbrasse holder is the only pick here that lists metal construction, with four adjustable feet and a stated load limit of 30 pounds.
Score breakdown
The Office Score weighs performance, build, value, safety and warranty. For a label holder, safety means a stated stable base, feet, or load limit on the listing; the Marbrasse and the MUNBYN 3-in-1 state one, the other three do not. Two listings state a warranty term: PONNOR at 2 year and the MUNBYN 3-in-1 at 12 months. How we pick explains the weights.
| Product | Office Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| MUNBYN 3-in-1 Holder | 9.7 | 32 | 21 | 21 | 7 | 3 |
| Marbrasse Metal Holder | 9.7 | 30 | 22 | 20 | 9 | 0 |
| PONNOR Label Holder | 9.6 | 30 | 20 | 21 | 0 | 4 |
| MUNBYN ILH01 Holder | 9.4 | 29 | 20 | 20 | 0 | 0 |
| Jiose 4×6 Holder | 9.4 | 28 | 20 | 20 | 0 | 0 |
We fit point totals onto a 9.2 low and 9.8 high in a straight line. One item can outscore another only by earning more points.
More for your workspace
See every bookshelves and file cabinets guide and all office machines and storage guides.
More picks: label makers and shredders, desk organizers and whiteboards, printers.





