Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›

Home office gear, compared spec by spec.

Amazon Black Friday Week deals
Keyboards and Keyboard Trays

Best Keycap Puller Small (2026): 5 Picks Compared

Five compact keycap pullers compared by claw grip, two-in-one switch pulling, housing material and stated extras for small keyboards.

Best Keycap Puller Small (2026): 5 Picks Compared

Halfway through a keyboard clean, a keycap pops off and lands somewhere behind the desk, and the best keycap puller small enough to keep in a drawer is the tool that turns the rest of the job from fiddly to quick. The right one lifts caps without bending a stem and leaves the switch underneath in place. We compared a set of compact keycap pullers by claw grip, two-in-one switch pulling, housing material and stated extras, using only what each listing publishes.

OfficeKitHQ earns a commission when you buy through links on this page, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Affiliate disclosure.

Quick picks

  • Jxiwfvl 2-in-1 Puller
    Best Overall Jxiwfvl 2-in-1 Puller: 4-claw stainless steel grip, one-press pop-up, switch puller built in Check price on Amazon
  • Gateron Twins Pink
    Best Two-in-One Gateron Twins Pink: Pink Twins tool pulls switches and keycaps, holds them after the pull Check price on Amazon
  • Gateron Twins Blue
    Best Blue Pick Gateron Twins Blue: Same Twins tool in blue, PC housing, press to pop out Check price on Amazon
  • New Fashion Kingdom Puller
    Cleaning Brushes Included New Fashion Kingdom Puller: Title lists 2 cleaning brushes with the puller Check price on Amazon
  • SYIDINZN 2-in-1 Puller
    Steel With Plastic Handle SYIDINZN Steel Puller: Stainless steel puller with a plastic handle, per the title Check price on Amazon

Our desk picks

Jxiwfvl 2-in-1 Puller

Jxiwfvl 2-in-1 Puller

Jxiwfvl9.6/10 Office Score
i
The Office Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A two-in-one puller with four stainless steel claws, one-press pop-up removal, an ergonomic pressure pad and a retractable design for compact storage.

Pros

  • Four stainless steel claws for secure gripping, per the listing
  • One-press pop-up removal with a press-type ejection mechanism
  • Handles all hot-swappable switches, with no soldering needed
  • Ergonomic pressure pad and retractable design for compact storage

Cons

  • No warranty term is stated; the spec table lists the warranty description as "No"
  • No size or weight is stated in the listing
  • Colour is limited to Red and Black
  • Listing leans on convenience claims that cannot be checked from specs
Detailed Review

Jxiwfvl lists the puller as a two-in-one tool that combines a keycap puller and a switch remover, with four stainless steel claws for secure gripping and a press-type ejection mechanism for one-press pop-up removal. The listing states it handles all hot-swappable switches, so no soldering is needed, and it lists an ergonomic pressure pad to reduce hand fatigue, a retractable design for compact storage, high-grade steel and ABS construction and an anti-slip texture for secure handling. The spec table gives the colour as Red and Black and lists the warranty description as "No", so no warranty term is stated.

Who it's for: someone who swaps switches as well as caps and wants the most specific grip claim in this set. Who should skip it: anyone who wants a warranty term in writing or a colour other than Red and Black.

Its Office Score of 9.6/10 comes from performance 30/35, build 21/25, value 21/25, safety not scored (non-powered gear) and warranty 0/5: 72 of 90 points, placed on our 9.2 to 9.8 scale.

Key Specifications
Grip4 stainless steel claws
FunctionKeycap and switch puller
MaterialSteel and ABS
ColourRed and Black

Figures as published on the retailer listing, collected 12 November 2026. Performance figures are manufacturer rated.

Safety and Warranty

What this listing states. This product does not plug in or run on a battery, so safety is not part of its score. No warranty term, so warranty scores zero. See How We Pick.

Fit the desk first. Check the stated size against your desk depth and keyboard tray, and charge or pair as the manual describes. No keyboard, mouse or wrist rest prevents or treats injury.

This is general buying information, not professional advice. Follow each product manual and local rules, and see our Safety Disclaimer.

Gateron Twins Pink

Gateron Twins Pink

GATERON9.6/10 Office Score
i
The Office Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A two-in-one Twins tool in pink with a PC housing and a rectangular design that holds the switch and keycap after the pull.

Pros

  • Switch puller and keycap puller in one tool
  • Holds the switch and keycap after pulling, so they do not fall off
  • Press to pop out the held switch or keycap
  • Rectangular design the listing calls more flexible to use

Cons

  • No warranty term is stated
  • No claw or grip material is stated beyond the PC housing
  • No size or weight is stated in the listing
  • Pink is the only colour stated for this listing
Detailed Review

Gateron lists the Twins as a two-in-one tool with both a switch puller and a keycap puller, in a rectangular design the listing calls more flexible to use. The housing is made by PC material, and after pulling out the switch and keycap the tool still holds them, which the listing says keeps them from falling off and getting lost. A gentle press pops out the switch and keycap held by the tool. The spec table gives the colour as Pink and lists one item, with no warranty term stated.

Who it's for: someone who wants one small tool for both switches and caps and likes the cap to stay held after the pull. Who should skip it: anyone who wants a stated claw material or a warranty term.

Its Office Score of 9.6/10 comes from performance 28/35, build 20/25, value 20/25, safety not scored (non-powered gear) and warranty 0/5: 68 of 90 points, placed on our 9.2 to 9.8 scale.

Key Specifications
FunctionSwitch and keycap puller
HousingPC material
DesignRectangular
ColourPink

Figures as published on the retailer listing, collected 12 November 2026. Performance figures are manufacturer rated.

Safety and Warranty

What this listing states. This product does not plug in or run on a battery, so safety is not part of its score. No warranty term, so warranty scores zero. See How We Pick.

Fit the desk first. Check the stated size against your desk depth and keyboard tray, and charge or pair as the manual describes. No keyboard, mouse or wrist rest prevents or treats injury.

This is general buying information, not professional advice. Follow each product manual and local rules, and see our Safety Disclaimer.

Gateron Twins Blue

Gateron Twins Blue

GATERON9.6/10 Office Score
i
The Office Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A two-in-one Twins tool in blue with a PC housing and a rectangular design that holds the switch and keycap after the pull.

Pros

  • Switch puller and keycap puller in one tool
  • Holds the switch and keycap after pulling, so they do not fall off
  • Press to pop out the held switch or keycap
  • Rectangular design the listing calls more flexible to use

Cons

  • No warranty term is stated
  • No claw or grip material is stated beyond the PC housing
  • No size or weight is stated in the listing
  • Blue is the only colour stated for this listing
Detailed Review

Gateron lists the Twins as a two-in-one tool with both a switch puller and a keycap puller, in a rectangular design the listing calls more flexible to use. The housing is made by PC material, and after pulling out the switch and keycap the tool still holds them, which the listing says keeps them from falling off and getting lost. A gentle press pops out the switch and keycap held by the tool. The listing is identical to the pink Twins listing apart from the colour, which the spec table gives as Blue, and no warranty term is stated.

Who it's for: someone who wants one small tool for both switches and caps and prefers blue. Who should skip it: anyone who wants a stated claw material or a warranty term.

Its Office Score of 9.6/10 comes from performance 28/35, build 20/25, value 20/25, safety not scored (non-powered gear) and warranty 0/5: 68 of 90 points, placed on our 9.2 to 9.8 scale.

Key Specifications
FunctionSwitch and keycap puller
HousingPC material
DesignRectangular
ColourBlue

Figures as published on the retailer listing, collected 12 November 2026. Performance figures are manufacturer rated.

Safety and Warranty

What this listing states. This product does not plug in or run on a battery, so safety is not part of its score. No warranty term, so warranty scores zero. See How We Pick.

Fit the desk first. Check the stated size against your desk depth and keyboard tray, and charge or pair as the manual describes. No keyboard, mouse or wrist rest prevents or treats injury.

This is general buying information, not professional advice. Follow each product manual and local rules, and see our Safety Disclaimer.

SYIDINZN 2-in-1 Puller

SYIDINZN 2-in-1 Puller

SYIDINZN9.6/10 Office Score
i
The Office Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 2-in-1 wire puller with a plastic handle and two steel loops for keycaps and switches.

Pros

  • Two steel loops catch and pull keys, and the tool also pulls switches
  • Lists Cherry MX, Alps and Topre switch compatibility
  • Wire loops bend outward to fit onto keycaps
  • Compact wire style suits a drawer or a bag

Cons

  • Not for scissor switches, per the listing warning
  • No warranty term is stated
  • No size or weight is stated
Detailed Review

SYIDINZN lists a keycap puller with a plastic handle and two steel loops that catch and pull keys, and the same tool pulls switches. The listing says the loops bend outward to fit onto keycaps and that keycaps and shafts can be removed more quickly and safely. Compatibility lists Cherry MX, Alps and Topre switches, with a warning against scissor switches. The spec table lists keyboard attributes such as a layout and a key count that describe a keyboard, not a puller; this article uses the title and bullets. The warranty description is a repeated brand string, not a term, so no warranty term is counted.

Who it's for: owners of Cherry MX, Alps or Topre boards who also pull switches. Who should skip it: anyone with scissor switches or anyone who wants a stated warranty term.

Its Office Score of 9.6/10 comes from performance 30/35, build 21/25, value 21/25, safety 5/10 and warranty 0/5: 77 of 100 points, placed on our 9.2 to 9.8 scale.

Key Specifications
TypeKeycap and switch puller
MaterialStainless steel, plastic
CompatibilityCherry MX, Alps, Topre
WarningNot for scissor switches

Figures as published on the retailer listing, collected 24 October 2026. Performance figures are manufacturer rated.

Safety and Warranty

What this listing states. Wire loops the listing says remove keycaps and shafts more quickly and safely, so safety scores 5 of 10. No warranty term, so warranty scores zero. See How We Pick.

Fit the desk first. Check the stated size against your desk depth and keyboard tray, and charge or pair as the manual describes. No keyboard, mouse or wrist rest prevents or treats injury.

This is general buying information, not professional advice. Follow each product manual and local rules, and see our Safety Disclaimer.

New Fashion Kingdom Puller

New Fashion Kingdom Puller

New Fashion Kingdom9.4/10 Office Score
i
The Office Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

Wire keycap puller in stainless steel with 2 cleaning brushes, for Cherry MX, Alps and Topre switches, with a 6-month warranty.

Pros

  • Wire puller bends outward to fit mechanical keycaps
  • Holds up to 3 keys to speed up key removal, per the listing
  • Anti-static brush for cleaning electronic devices
  • 2 cleaning brushes included for keyboards and devices

Cons

  • Title names it a switch puller while bullets describe a wire keycap puller
  • No switch latch grip is described on the listing
  • Not for scissor type switches, per the listing
  • No compatibility beyond Cherry MX, Alps and Topre is stated
Detailed Review

The New Fashion Kingdom pick is a compact wire style keycap puller in stainless steel, with 2 cleaning brushes and an anti-static brush described as temperature resistant, lightweight and portable. The wires bend outward to fit onto mechanical keycaps and can hold up to 3 keys to speed up removal, with compatibility for Cherry MX, Alps and Topre switches and a warning not to use it on scissor type switches. The title names it a switch puller, while the bullets describe a wire keycap puller with cleaning brushes, so the keycap function is the one the bullets support. Dimensions are 5.0 inches x 0.7 inches x 0.2 inches, and the listing states a 6-month warranty.

Who it is for: owners who mainly need keycap removal plus brushes for cleaning. Who should skip it: anyone who needs a dedicated switch latch grip, or who uses scissor type switches.

Its Office Score of 9.4/10 comes from performance 26/35, build 19/25, value 19/25, safety 3/10 and warranty 1/5: 68 of 100 points, placed on our 9.2 to 9.8 scale.

Key Specifications
TypeWire keycap puller with cleaning brushes
MaterialStainless steel wire
CompatibilityCherry MX, Alps, Topre
Dimensions5.0 inches x 0.7 inches x 0.2 inches

Figures as published on the retailer listing, collected 29 October 2026. Performance figures are manufacturer rated.

Safety and Warranty

What this listing states. Anti-static brush stated for cleaning electronic devices, so safety scores 3 of 10. The listing states a warranty of 6-month warranty. It does not say everything a buyer needs, such as who pays return shipping, so warranty scores 1 of 5. See How We Pick.

Fit the desk first. Check the stated size against your desk depth and keyboard tray, and charge or pair as the manual describes. No keyboard, mouse or wrist rest prevents or treats injury.

This is general buying information, not professional advice. Follow each product manual and local rules, and see our Safety Disclaimer.

As an Amazon Associate I earn from qualifying purchases.

Specs compared

Keycap Puller Office Score Grip Switch puller Housing Colour Amazon
Jxiwfvl 2-in-1 Puller 9.6/10 4 stainless steel claws Yes, built in Steel and ABS Red and Black View on Amazon
Gateron Twins Pink 9.6/10 Holds cap after pull Yes, built in PC Pink View on Amazon
Gateron Twins Blue 9.6/10 Holds cap after pull Yes, built in PC Blue View on Amazon
New Fashion Kingdom Puller 9.4/10 Not stated Named in title Not stated Not stated View on Amazon
SYIDINZN Steel Puller 9.6/10 Not stated Named in title Stainless steel Not stated

All numbers are the manufacturer’s stated specs, not measured in an office, pulled on 12 November 2026. None of the five state a warranty term: the Jxiwfvl spec table lists the warranty description as “No”, and the other four listings state no warranty at all.

How to choose the best keycap puller small

Start with the claw grip

The grip is the part that meets the keycap. The Jxiwfvl lists four stainless steel claws for secure gripping, the most specific grip claim in this set, and pairs them with a press-type ejection mechanism for one-press pop-up removal. The Gateron Twins take a different approach: the tool holds the switch and keycap after the pull, which the listing says keeps them from falling off and getting lost. The two title-only picks state no grip detail at all, so their grip is unrated here. If the caps are the priority, a named claw count beats a vague shape claim.

Two-in-one or keycaps only

Every pick in this set names switch pulling in its title, so none of them is a keycap-only tool. The Jxiwfvl combines a keycap puller and a switch remover and states it handles all hot-swappable switches, with no soldering needed. The Gateron Twins put both functions in one rectangular tool and pop the held switch or cap out with a gentle press. A combined tool suits a desk where switches get swapped as often as caps get cleaned; see our keycap puller tool guide for the wider set of puller styles.

Small enough to store, easy to hold

A small puller earns its drawer space by being easy to hold and hard to lose. The Jxiwfvl lists an ergonomic pressure pad to reduce hand fatigue and a retractable design for compact storage, plus an anti-slip texture for secure handling. The Gateron Twins use a rectangular design the listing calls more flexible to use, with an ergonomics design that pops the held cap out on a press. The table below lines up the grip, housing and colour each listing states.

Puller Grip Housing Colour
Jxiwfvl 2-in-1 Puller 4 stainless steel claws Steel and ABS Red and Black
Gateron Twins Pink Holds cap after pull PC Pink
Gateron Twins Blue Holds cap after pull PC Blue
New Fashion Kingdom Puller Not stated Not stated Not stated
SYIDINZN Steel Puller Not stated Stainless steel Not stated

Figures as stated in each listing. Colour is the only stated difference between the two Gateron Twins picks.

Read the warranty line, not the headline

None of the five state a warranty term. The Jxiwfvl spec table lists the warranty description as “No”, and the Gateron Twins listings state no warranty at all. The two title-only picks state no warranty term either, and their listings carry no spec table to check. A puller is a simple hand tool with little to fail, but a stated term is still the only promise that counts, and none of these listings makes one. For a closer look at a different puller shape, see our ring keycap puller guide.

Match the puller to the keyboard

The Jxiwfvl states it handles all hot-swappable switches, which covers the boards where switches lift out without soldering. The Gateron Twins state they remove keyboard switches and replace keycaps on a mechanical keyboard. Neither listing names a specific keyboard model, so check the switch type on the board before ordering. Laptop boards need a different approach; see our keycap puller for laptop guide for those.

Setup Notes

  • Check the switch type on the board first: the Jxiwfvl states it handles all hot-swappable switches, and the Gateron Twins state they work on a mechanical keyboard.
  • Keep the puller in the desk drawer or the keyboard box; a small hand tool goes missing fast once it leaves the desk.
  • Press the Gateron Twins gently to pop out the held switch or keycap, and set each cap aside before pulling the next one.
  • No power, cables or assembly are stated for any pick; the Jxiwfvl lists a retractable design for compact storage.

FAQ

Which keycap puller should I buy for a small keyboard?

The first pick here is the Jxiwfvl 2-in-1 Puller, which lists four stainless steel claws, one-press pop-up removal and a retractable design for compact storage. The Gateron Twins are the next picks, with a two-in-one tool that holds the cap after the pull.

Do I need a switch puller as well as a keycap puller?

Every pick in this set names switch pulling in its title, so each one covers both jobs on paper. The Jxiwfvl states it handles all hot-swappable switches with no soldering needed, and the Gateron Twins pop the held switch out with a press.

Is a steel keycap puller better than a plastic one?

The listings state the materials rather than ranking them. The Jxiwfvl lists stainless steel claws with a steel and ABS body, the SYIDINZN names stainless steel with a plastic handle, and the Gateron Twins list a PC housing. Choose by the grip design the listing states, not by the material name alone.

Will a keycap puller damage my keycaps?

No listing here states damage protection, so the grip design is what to check. The Jxiwfvl lists four stainless steel claws for secure gripping, and the Gateron Twins hold the cap after the pull so it does not fall off and get lost.

What colours do these keycap pullers come in?

The Jxiwfvl is listed in Red and Black, and the Gateron Twins come in Pink and Blue. The two title-only picks state no colour.

Jxiwfvl 2-in-1 Puller
Still deciding? Our top pickJxiwfvl 2-in-1 Puller
Check price on Amazon

Score breakdown

The Office Score weighs performance (claw grip and switch pulling), build (housing and grip materials), value for the stated specs, safety and warranty. For a keycap puller, safety means a stated certification on the listing; none of the five state one, so safety scores zero across the picks. None of the five state a warranty term, so warranty scores zero as well. How we pick explains the weights.

Product Office Score Perf. /35 Build /25 Value /25 Safety /10 Warranty /5
Jxiwfvl 2-in-1 Puller 9.6 30 21 21 n/a 0
Gateron Twins Pink 9.6 28 20 20 n/a 0
Gateron Twins Blue 9.6 28 20 20 n/a 0

We fit point totals onto a 9.2 low and 9.8 high in a straight line. One item can outscore another only by earning more points. No plug, no battery and no listed safety features: the safety column is set to n/a and the score is based on 90 points.

More for your workspace

See every keyboards and keyboard trays guide and all computer peripherals guides.

More picks: ring keycap puller, keycap puller for laptop, keycap puller tool.