The morning video call with the monitor pushed to the back edge of the desk is the moment a best monitor mount pole starts to make sense. A pole mount lifts the screen off the desk and holds it where you look, freeing the surface underneath. We compared 5 pole-mount brackets, arms and poles for 17 to 32 inch screens, scoring stated weight capacity, VESA fit, motion range, pole compatibility and warranty term, using only what each listing publishes.
OfficeKitHQ earns a commission when you buy through links on this page, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Affiliate disclosure.
Quick picks
Best Overall MOUNT-IT! MI-391: Two articulating arms, 45° tilt and a lifetime warranty Check price on Amazon
Best Heavy-Duty Pole PUTORSEN 32-IN POLE: 32 in steel pole rated to 88 lbs with clamp and grommet bases Check price on Amazon
Best for Dual Monitors PUTORSEN FPTARM04: 22 lb capacity; a second bracket slides onto the same pole Check price on Amazon
Best Cable Management VIVO MOUNT-POLE01A: Swiveling arm with cable clips and 180° swivel Check price on Amazon
Best Bracket Upgrade VIVO MOUNT-POLE01: 22 lb bracket adds VESA 75/100 to a pole you already own Check price on Amazon
The picks
| # | Product | Office Score | Buy |
|---|---|---|---|
| 1 | MOUNT-IT! MI-391 | 9.7/10 | Buy on Amazon |
| 2 | PUTORSEN 32-IN POLE | 9.7/10 | Buy on Amazon |
| 3 | PUTORSEN FPTARM04 | 9.6/10 | Buy on Amazon |
| 4 | VIVO MOUNT-POLE01A | 9.6/10 | Buy on Amazon |
| 5 | VIVO MOUNT-POLE01 | 9.6/10 | Buy on Amazon |
MOUNT-IT! MI-391
A steel pole mount with two articulating arms, 45° tilt each way and a detachable VESA plate for 17 to 32 inch screens.
Pros
- Two articulating arms for a wider range of screen positions
- Tilts 45° up and 45° down, the widest tilt range here
- Detachable VESA plate for faster installation
- Lifetime warranty stated, the longest term in this roundup
Cons
- 17.6 lb capacity trails the 22 lb options here
- Needs a 1.1 to 2.4 in pole, which is not included
- No cable management clips stated
- Holds one screen; a dual setup needs a second mount
Detailed Review
The Mount-It! MI-391 is a steel pole bracket with two articulating arms for 17 to 32 inch monitors and TVs up to 17.6 lbs, on VESA 75x75 and 100x100. It tilts 45° up and 45° down, swivels 180° and rotates 360°, with a detachable VESA plate and a stated lifetime warranty. One contradiction to note: the spec table lists the minimum supported screen size as 32 inches while the title and bullets state 17 to 32 inches; the title and bullets win.
Who it's for: desk workers who want the widest tilt range and a lifetime warranty on a pole mount. Who should skip it: anyone with a screen over 17.6 lbs, or anyone with no 1.1 to 2.4 in pole to clamp to.
Its Office Score of 9.7/10 comes from performance 32/35, build 21/25, value 21/25, safety 5/10 and warranty 5/5: 84 of 100 points, placed on our 9.2 to 9.8 scale.
Key Specifications
| Screen size | 17 to 32 in |
|---|---|
| Weight capacity | 17.6 lb |
| VESA | 75x75, 100x100 |
| Tilt | 45° up, 45° down |
Figures as published on the retailer listing, collected 23 October 2026. Performance figures are manufacturer rated.
Safety and Warranty
What this listing states. Stated 17.6 lb weight capacity, so safety scores 5 of 10. Lifetime warranty, so warranty scores 5 of 5. See How We Pick.
Match the mount. Check your screen's VESA pattern, size and weight against the stated range, and check that your desk thickness and edge suit a clamp or grommet mount before you drill or clamp.
This is general buying information, not professional advice. Follow each product manual and local rules, and see our Safety Disclaimer.
PUTORSEN 32-IN POLE
An extra-tall 32 inch steel pole rated to 88 lbs, with C-clamp and grommet mounting options for heavy monitors.
Pros
- 88 lb capacity, the highest stated here, suits ultrawide screens
- 32 in height frees vertical space above the desk
- C-clamp fits desks 0.39 to 3.35 in thick; grommet fits 0.39 to 1.97 in holes
- 10-year warranty stated
Cons
- Pole only; monitor brackets are a separate purchase
- Fixed mount with no tilt or swivel of its own
- 35 mm diameter needs a bracket whose clamp range includes 1.38 in
- Compatibility with 90% of desks is the maker's own claim
Detailed Review
This PUTORSEN listing is the pole itself rather than a full mount: a 32 inch, 35 mm steel tube with a powder-coated matte black finish, rated to 88 lbs, for use as an add-on to an existing monitor arm or as a standalone tall pole. It offers a C-clamp for desks 0.39 to 3.35 inches thick or a grommet mount for holes 0.39 to 1.97 inches, and the maker claims compatibility with 90% of desks.
Who it's for: anyone upgrading a short factory pole to hold a heavy or ultrawide screen higher. Who should skip it: anyone who needs the bracket too, since this listing is the pole only.
Its Office Score of 9.7/10 comes from performance 28/35, build 22/25, value 21/25, safety 7/10 and warranty 4/5: 82 of 100 points, placed on our 9.2 to 9.8 scale.
Key Specifications
| Height | 32 in |
|---|---|
| Diameter | 35 mm / 1.38 in |
| Weight capacity | 88 lb |
| Warranty | 10 years |
Figures as published on the retailer listing, collected 23 October 2026. Performance figures are manufacturer rated.
Safety and Warranty
What this listing states. Stated 88 lb weight capacity, so safety scores 7 of 10. 10 years. It does not say everything a buyer needs, such as who pays return shipping, so warranty scores 4 of 5. See How We Pick.
Match the mount. Check your screen's VESA pattern, size and weight against the stated range, and check that your desk thickness and edge suit a clamp or grommet mount before you drill or clamp.
This is general buying information, not professional advice. Follow each product manual and local rules, and see our Safety Disclaimer.
PUTORSEN FPTARM04
A full-motion pole bracket for 17 to 32 inch screens up to 22 lbs, with a quick-release VESA plate and dual-monitor support.
Pros
- 22 lb capacity, the joint highest here
- A second bracket slides onto the same pole for a dual-screen setup
- +60° up and -90° down tilt, the widest bracket tilt range here
- Quick-release VESA plate for fast monitor swaps
Cons
- Fits only a 1.377 in pole with one open end, a narrow requirement
- 2-year warranty is shorter than the 3-year VIVO terms
- Pole must be vertical and is not included
- No cable management stated
Detailed Review
The PUTORSEN FPTARM04 is a steel pole bracket for 17 to 32 inch screens up to 22 lbs on VESA 75x75 and 100x100, with +60° upward and -90° downward tilt, ±90° swivel and 360° rotation. It clamps to a 1.377 inch pole with one open end for sliding the bracket on, and the maker recommends a vertical pole. A second bracket can slide onto the same pole for a dual-screen setup.
Who it's for: dual-screen planners who want a second bracket on one pole. Who should skip it: anyone without a 1.377 in pole with an open end, or anyone wanting a longer warranty.
Its Office Score of 9.6/10 comes from performance 30/35, build 21/25, value 21/25, safety 6/10 and warranty 2/5: 80 of 100 points, placed on our 9.2 to 9.8 scale.
Key Specifications
| Screen size | 17 to 32 in |
|---|---|
| Weight capacity | 22 lb |
| VESA | 75x75, 100x100 |
| Pole fit | 1.377 in, open end |
Figures as published on the retailer listing, collected 23 October 2026. Performance figures are manufacturer rated.
Safety and Warranty
What this listing states. Stated 22 lb weight capacity, so safety scores 6 of 10. 2 Year Manufacturer. It does not say everything a buyer needs, such as who pays return shipping, so warranty scores 2 of 5. See How We Pick.
Match the mount. Check your screen's VESA pattern, size and weight against the stated range, and check that your desk thickness and edge suit a clamp or grommet mount before you drill or clamp.
This is general buying information, not professional advice. Follow each product manual and local rules, and see our Safety Disclaimer.
VIVO MOUNT-POLE01A
A steel pole-mount arm for 17 to 32 inch screens up to 17.6 lbs, with a swiveling arm, cable clips and a removable VESA plate.
Pros
- Swiveling arm adds reach beyond the bracket
- Cable management clips route cords along the arm
- 180° swivel plus 360° rotation for screen sharing
- 3-year warranty stated
Cons
- 17.6 lb capacity is lower than the 22 lb options
- Pole not included; needs a 1.1 to 2.4 in pole
- Tilt limited to +30° / -30°
- No height adjustment on the arm itself
Detailed Review
The VIVO MOUNT-POLE01A is a steel arm that clamps to poles from 1.1 to 2.4 inches in diameter, pole not included, and holds 17 to 32 inch screens up to 17.6 lbs on VESA 75x75 or 100x100. It offers +30° to -30° tilt, 180° swivel, 360° rotation and a swiveling arm, with cable clips and a removable VESA plate.
Who it's for: anyone who wants arm reach plus tidy cables on an existing pole. Who should skip it: anyone with a screen over 17.6 lbs, or anyone with no pole yet.
Its Office Score of 9.6/10 comes from performance 29/35, build 21/25, value 20/25, safety 5/10 and warranty 3/5: 78 of 100 points, placed on our 9.2 to 9.8 scale.
Key Specifications
| Screen size | 17 to 32 in |
|---|---|
| Weight capacity | 17.6 lb |
| VESA | 75x75, 100x100 |
| Item weight | 2.1 lb |
Figures as published on the retailer listing, collected 23 October 2026. Performance figures are manufacturer rated.
Safety and Warranty
What this listing states. Stated 17.6 lb weight capacity, so safety scores 5 of 10. 3 Year Warranty. It does not say everything a buyer needs, such as who pays return shipping, so warranty scores 3 of 5. See How We Pick.
Match the mount. Check your screen's VESA pattern, size and weight against the stated range, and check that your desk thickness and edge suit a clamp or grommet mount before you drill or clamp.
This is general buying information, not professional advice. Follow each product manual and local rules, and see our Safety Disclaimer.
VIVO MOUNT-POLE01
A heavy-duty steel pole bracket for 17 to 32 inch screens up to 22 lbs, adding full-motion VESA mounting to a compatible pole.
Pros
- 22 lb capacity, the joint highest here
- Fits poles from 1.1 to 2.4 in in diameter
- -30° to +30° tilt, 180° swivel and 360° rotation
- 3-year warranty stated
Cons
- Bracket only; the pole is a separate purchase
- No arm, so reach is limited to the bracket
- No cable management stated
- One screen per bracket; a dual setup needs two
Detailed Review
The VIVO MOUNT-POLE01 is a steel bracket that mounts to poles from 1.1 to 2.4 inches in diameter and holds 17 to 32 inch screens up to 22 lbs on VESA 75x75 or 100x100, with -30° to +30° tilt, 180° swivel and 360° rotation in portrait or landscape. Contradiction to note: the spec table lists a 30 inch maximum and 13 inch minimum screen size while the title and bullets state 17 to 32 inches; the title and bullets win.
Who it's for: anyone adding VESA 75/100 mounting to a pole they already own. Who should skip it: anyone who needs the pole itself, or anyone who wants an articulated arm.
Its Office Score of 9.6/10 comes from performance 28/35, build 20/25, value 20/25, safety 6/10 and warranty 3/5: 77 of 100 points, placed on our 9.2 to 9.8 scale.
Key Specifications
| Screen size | 17 to 32 in |
|---|---|
| Weight capacity | 22 lb |
| VESA | 75x75, 100x100 |
| Pole fit | 1.1 to 2.4 in |
Figures as published on the retailer listing, collected 23 October 2026. Performance figures are manufacturer rated.
Safety and Warranty
What this listing states. Stated 22 lb weight capacity, so safety scores 6 of 10. 3 Year Warranty. It does not say everything a buyer needs, such as who pays return shipping, so warranty scores 3 of 5. See How We Pick.
Match the mount. Check your screen's VESA pattern, size and weight against the stated range, and check that your desk thickness and edge suit a clamp or grommet mount before you drill or clamp.
This is general buying information, not professional advice. Follow each product manual and local rules, and see our Safety Disclaimer.
As an Amazon Associate I earn from qualifying purchases.
More picks to compare
VIVO PT-SD-PL01B39 in extra-tall pole for VIVO stand owners; mounting hardware not includedCheck on Amazon
WORLDLIFT 31.6-IN POLE31.6 in pole with C-clamp and grommet bases for a taller setupCheck on Amazon
WORLDLIFT WLMA38-2Height-adjustable pole arm; title claims gas spring, bullets say mechanical springCheck on Amazon
Compare the picks
| Pole Mount | Office Score | Screen size | Weight capacity | VESA | Tilt range | Warranty | Amazon |
|---|---|---|---|---|---|---|---|
| MOUNT-IT! MI-391 | 9.7/10 | 17 to 32 in | 17.6 lb | 75×75, 100×100 | 45° up, 45° down | Lifetime | View on Amazon |
| PUTORSEN 32-IN POLE | 9.7/10 | 17 to 32 in | 88 lb | Not stated | Fixed | 10 years | View on Amazon |
| PUTORSEN FPTARM04 | 9.6/10 | 17 to 32 in | 22 lb | 75×75, 100×100 | +60° up, -90° down | 2 years | View on Amazon |
| VIVO MOUNT-POLE01A | 9.6/10 | 17 to 32 in | 17.6 lb | 75×75, 100×100 | +30° / -30° | 3 years | View on Amazon |
| VIVO MOUNT-POLE01 | 9.6/10 | 17 to 32 in | 22 lb | 75×75, 100×100 | -30° / +30° | 3 years | View on Amazon |
Specifications are manufacturer rated as listed, collected 23 October 2026. 3 of the 5 state a 3-year or shorter warranty; the Mount-It! states a lifetime warranty and the PUTORSEN pole a 10-year term.
How we scored them
The Office Score weighs performance (screen size range, motion range and mounting flexibility), build (steel construction and stated capacity), value for the stated specs, safety and warranty. For a pole mount, safety means a stated weight capacity and a defined pole fit on the listing; all 5 state a capacity. 3 of the 5 state a 3-year or shorter warranty, the Mount-It! states a lifetime warranty and the PUTORSEN pole a 10-year term. How we pick explains the weights.
| Product | Office Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| MOUNT-IT! MI-391 | 9.7 | 32 | 21 | 21 | 5 | 5 |
| PUTORSEN 32-IN POLE | 9.7 | 28 | 22 | 21 | 7 | 4 |
| PUTORSEN FPTARM04 | 9.6 | 30 | 21 | 21 | 6 | 2 |
| VIVO MOUNT-POLE01A | 9.6 | 29 | 21 | 20 | 5 | 3 |
| VIVO MOUNT-POLE01 | 9.6 | 28 | 20 | 20 | 6 | 3 |
Scores run from 9.2 to 9.8: each product’s point total is placed on that range, so more points always means a higher score.
How to choose the best monitor mount pole
Match the VESA pattern first
Every bracket here lists VESA 75×75 and 100×100, so check the hole pattern on the back of the monitor before anything else. The pole-only listings state no VESA pattern, since the bracket you clamp to them decides that. If the monitor’s pattern is recessed or unusual, plan on an adapter the listings do not include.
Check the capacity, then the pole
Stated capacities here run from 17.6 lbs to 88 lbs, so match the mount to the monitor’s stated weight first. Then check the pole: the VIVO and Mount-It! brackets fit poles from 1.1 to 2.4 in in diameter, while the PUTORSEN arm needs a 1.377 in pole with one open end. The PUTORSEN replacement pole is 35 mm, which the listing also gives as 1.38 in, in diameter. For a two-screen desk, the multi monitor mount guide compares dedicated dual arms.
Pole fit at a glance
| Mount | Pole fit | Capacity | Warranty |
|---|---|---|---|
| MOUNT-IT! MI-391 | 1.1 to 2.4 in | 17.6 lb | Lifetime |
| PUTORSEN 32-IN POLE | 35 mm / 1.38 in | 88 lb | 10 years |
| PUTORSEN FPTARM04 | 1.377 in, open end | 22 lb | 2 years |
| VIVO MOUNT-POLE01A | 1.1 to 2.4 in | 17.6 lb | 3 years |
| VIVO MOUNT-POLE01 | 1.1 to 2.4 in | 22 lb | 3 years |
The table uses each listing’s own figures. Where a listing contradicts itself, the review for that pick notes it.
Motion range: tilt, swivel and rotation
All 5 give 360° rotation and at least 180° swivel. Tilt is where they split: the Mount-It! tilts 45° up and 45° down, the PUTORSEN arm tilts +60° up and -90° down, and the VIVO pair tilt +30° to -30°. If the screen often turns toward a second person, favor the wider swivel and an arm with reach; the monitor arm guide covers full articulated arms for comparison.
Read the warranty line, not the headline
The terms here spread wide: lifetime, 10 years, 3 years and 2 years. The Mount-It! states a lifetime warranty, the PUTORSEN pole 10 years, each VIVO 3 years and the PUTORSEN arm 2 years. A longer term matters on hardware that holds an expensive screen all day, every day.
Setup Notes
- Measure the pole diameter before ordering a bracket: 1.1 to 2.4 in for the VIVO and Mount-It! brackets, 1.377 in with one open end for the PUTORSEN arm.
- Confirm the monitor’s VESA pattern, 75×75 or 100×100 on these brackets, and its weight against the bracket’s stated capacity.
- Plan cable routing: the VIVO arm includes cable clips, while the other brackets state no cable management.
- For clamp bases, check desk thickness: the PUTORSEN pole’s C-clamp fits desks 0.39 to 3.35 in thick, and its grommet mount fits holes 0.39 to 1.97 in.
Frequently Asked Questions
Do all monitors fit the same pole mount?
No. Every bracket here lists VESA 75×75 and 100×100, so a monitor with a different pattern needs an adapter the listings do not state. Check the hole pattern on the back of the monitor first.
How do I mount a monitor on a pole?
Clamp or slide the bracket onto the pole, attach the VESA plate to the monitor, then hang the plate on the bracket. The PUTORSEN arm needs a 1.377 in pole with one open end to slide onto, while the VIVO and Mount-It! brackets clamp around poles from 1.1 to 2.4 in.
Are all monitor mounts the same?
No. This roundup covers brackets, an articulated arm and a bare pole, with capacities from 17.6 lbs to 88 lbs and warranties from 2 years to lifetime. Match the type to the job, then the specs to the screen.
Can one pole hold two monitors?
The PUTORSEN FPTARM04 is built for it: a second bracket slides onto the same pole for a dual-screen setup. For heavier pairs, the 88 lb PUTORSEN pole gives the vertical structure to build on.
What pole diameter do I need?
It depends on the bracket. The VIVO and Mount-It! brackets fit poles from 1.1 to 2.4 in in diameter, while the PUTORSEN arm fits a 1.377 in pole only. The PUTORSEN replacement pole is 35 mm, which the listing also gives as 1.38 in.
Related guides
See every monitor arm and stand guide and all computer peripherals guides.
More picks: multi monitor mounts, monitor stands, monitor arms.
