The report is printed, the covers are stacked beside the printer, and the binding machine waits on the corner of the desk. The last thing to get right is the comb, and binding combs sizes run from slim spines for a thin report to thick spines for a full binder. This guide explains how the diameter lines up with the sheet count, so the comb you buy closes around the stack instead of gaping open or pinching it shut.
OfficeKitHQ earns a commission when you buy through links on this page, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Affiliate disclosure.
OfficeKitHQ earns a commission when you buy through links on this page, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Affiliate disclosure.
Binding combs sizes: the quick answer
A binding comb is sized by its diameter, and the diameter decides how many sheets the comb holds. Diameters in the listings run from 1/4 inch to 1 inch, and the sheet counts run from 20 sheets to 225 sheets. Small diameters suit thin stacks and large diameters suit thick stacks, so count the sheets first and match the diameter to the count. Round-back combs are the common shape in these listings, and every comb here fits a 19-ring system except the Koceci spines (on Amazon), which use 30 rings.
Binding combs sizes by diameter
| Comb diameter | Sheets | Brand |
|---|---|---|
| 1/4 in | 20 | Rayson |
| 5/16 in | 40 | Fellowes, Rayson |
| 3/8 in | 55 | Rayson, MYFULLY |
| 1/2 in | 90 | Rayson |
| 5/8 in | 120 | Fellowes, Binditek |
| 13/16 in | 160 | Rayson |
| 7/8 in | 170 | Rayson |
| 1 in | 190 | Rayson |
| 1 in | 200 | Fellowes |
| 1 in | 225 | Binditek |
The same diameter can hold a different sheet count by brand. A 1 inch comb holds 190 sheets per Rayson, 200 sheets per Fellowes and 225 sheets per Binditek, so check the brand figure for the comb you buy. The 5/8 inch size shows the same spread on a smaller scale, with Fellowes and Binditek listing 120 sheets and Rayson listing 125 sheets. The TOTiyea set covers 3/8 inch to 1 inch in 5 sizes, with capacities from 60 to 200 sheets across the set.
Step 1: Count the sheets in the stack
Count the sheets in the stack, including the front and back binding covers, since covers take up room in the comb. Stack the pages flat and count them in groups, then write the count down before you shop. A stack that fits a 1/2 inch comb will not close in a 3/8 inch comb, so count before you buy. If the stack includes divider pages or printed tabs, count those sheets too. If the document grows after binding, the comb opens and lets pages in and out, so a comb that fits today still works after a revision.
Step 2: Pick the diameter from the table
Find the sheet count in the table above and read the diameter beside it. If the count falls between diameters, take the larger diameter: a comb that is too small will not close, while a larger comb still closes around the stack. A comb that is too large leaves the pages loose in the rings, so stay close to the count. Multi-size packs help when the stack size changes from job to job: the TOTiyea set holds 5 sizes with 20 pieces of each size, and the Rayson multi-size packs hold four sizes in a box.
Step 3: Check the rings and the paper size
Most of the listings here use a 19-ring comb for letter size paper, 8.5 by 11 inches. The TOTiyea combs (on Amazon) are 11 inches long and the Rayson combs are about 10.7 inches long, and each fits letter size paper. The Koceci spines are different: they use 30 rings for A4 paper with a 9.5 mm pitch, so they take 30-hole A4 paper and do not fit a 19-ring comb binding machine. Check the ring count and the paper size on the listing before you buy, and measure the holes in the pages if you are unsure.
What changes the capacity
Covers and margins change the sheet count a comb holds. Binditek lists its 1 inch comb at 225 sheets of #20 paper with a 3mm paper margin, and warns that binding with covers or a 5mm margin reduces the capacity. The TOTiyea set lists capacities from 60 to 200 sheets across its 5 sizes, so the same box covers a thin handout and a thick manual. Paper weight matters too: the figures here assume #20 paper, so thicker paper fills the comb sooner and thinner paper leaves room to spare. Count the covers with the pages, and if the stack sits close to the limit, take the next diameter up.
FAQ
What size binding comb do I need for 100 sheets?
A 5/8 inch comb, which Fellowes and Binditek list at 120 sheets, holds 100 sheets. A 1/2 inch comb holds 90 sheets per Rayson, so it is too small for 100 sheets. If the stack grows past 120 sheets, move up to a 1 inch comb.
Can I use a 1 inch comb for a thin document?
You can, but the pages will sit loose in the comb and the document will not lie flat. A 1/4 inch comb holds 20 sheets per Rayson, and a 5/16 inch comb holds 40 sheets per Fellowes and Rayson, so match the diameter to the stack instead.
Do binding combs fit any binding machine?
Most of the listings here work with any standard 19-ring comb binding system, including Fellowes, Binditek, Rayson and MYFULLY combs (on Amazon). The Koceci spines are the exception: they use 30 rings for A4 paper with a 9.5 mm pitch, so check the ring count before you buy.
How many sheets does a 1 inch binding comb hold?
It depends on the brand: Binditek lists 225 sheets, Fellowes lists 200 sheets, and Rayson lists 190 sheets for a 1 inch comb. The figures assume #20 paper with a 3mm margin, and covers or a 5mm margin reduce the count.
Where do binding comb sizes start in these listings?
The listings here start at 1/4 inch, which Rayson lists at 20 sheets. The TOTiyea set starts at 3/8 inch, and the Koceci spines start at 8.5 mm inner diameter.
More for your workspace
See the best comb binding machines, the best binding covers, the best plastic binding combs and the office storage guides.





