A stack of loose pages waits on the desk beside the morning coffee, and the report that should look bound still looks like a pile, so comb binding machine how to use comes down to a short routine: punch the pages, open the comb, thread the pages on, and close the comb. The steps below follow that routine, with the punch and bind capacities the listings state for each machine.
OfficeKitHQ earns a commission when you buy through links on this page, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Affiliate disclosure.
The quick answer: comb binding machine how to use
Punch a small stack, open the plastic comb with the machine, lay the punched pages over the open teeth, then close the comb so the teeth curl back through the holes. Match the comb to the stack: a 22 mm comb binds up to 200 sheets on the RAYSON listings, a 1 1/2 in comb binds up to 300 sheets on the Fellowes 5006801, and a 2 in comb binds up to 500 sheets on the Fellowes Quasar+ and Orion E 500.
Punch and bind capacity by machine
| Machine | Punch per pass | Bind capacity | Comb size | Punch length |
|---|---|---|---|---|
| Fellowes Quasar+ 5227201 | 25 sheets | 500 sheets | 2 in | Not stated |
| Tamerica 210PB | 20 sheets | 425 sheets | 2 in | 12 in |
| RAYSON SD1202 | 10 sheets | 200 sheets | 22 mm (7/8 in) | Not stated |
| Tamerica TCC242 | 15 sheets | 425 sheets | 2 in | 14 in |
| Fellowes 5006801 | Not stated | 300 sheets | 1 1/2 in | Not stated |
| Fellowes Orion E 500 | 30 sheets | 500 sheets | 2 in | 12 in wide |
| RAYSON SD-1501A21 | 15 sheets | 200 sheets | 22 mm (7/8 in) | Not stated |
| Akiles EcoBind-C | Not stated | Not stated | Not stated | 12 in |
Capacities are the figures each listing states; punch counts are per pass, and bind counts are the maximum sheets per book.
Step 1: Pick the comb size
Start from the stack. A 22 mm comb binds up to 200 sheets, which covers the RAYSON SD1202 and SD-1501A21 listings; a 1 1/2 in comb binds up to 300 sheets on the Fellowes 5006801; a 2 in comb binds up to 500 sheets on the Fellowes Quasar+ and the Orion E 500, and up to 425 sheets on the Tamerica 210PB and TCC242. If the stack sits near a limit, move up a comb size rather than forcing the pages on. If the machine is still on the shopping list, see the best comb binding machine guide.
Step 2: Set the edge guide and margin
Square the stack and set the edge guide so the holes land in the same place on every page. The RAYSON listings give a side margin adjustment with an edge guide from 3 mm to 6 mm, and the Tamerica listings give a 4-position punching depth adjustment for margin control. The Fellowes Quasar+ and Orion E 500 listings describe an edge guide that centers documents for punching, and the Akiles EcoBind-C (on Amazon) listing gives side margin control for a centered punch.
Step 3: Punch in small stacks
Punch only what the machine lists per pass: 10 sheets on the RAYSON SD1202 (on Amazon), 15 sheets on the Tamerica TCC242 (on Amazon) and the RAYSON SD-1501A21 (on Amazon), 20 sheets on the Tamerica 210PB (on Amazon), 25 sheets on the Fellowes Quasar+, and 30 sheets on the Fellowes Orion E 500. The Tamerica listings also state a rate of 5,000 sheets per hour and 250 books per hour for high-volume runs. Keep the stack square against the guide and punch the whole document in matching passes.
Step 4: Open the comb and thread the pages
Open the comb on the machine until the teeth spread, then lay the punched pages over the teeth, starting with the cover. The RAYSON SD-1501A21 listing includes 20 comb binding rings to start, and the SD1202 listing includes a starter comb set. The Tamerica 210PB lists 21 disengageable dies and the TCC242 lists 24 holes, so match the hole pattern to the comb before threading. For the matching supplies, see the best binding covers guide.
Step 5: Close the comb and check the bind
Close the comb slowly so the teeth curl back through the holes and the pages sit flat. Flip through the book and check that every page turns on the comb and no hole is torn. If a page hangs, open the comb again, reseat the page and close it again. A book that turns freely is done.
FAQ
How many sheets can a comb binding machine punch per pass?
It depends on the machine: the listings here run from 10 sheets per pass on the RAYSON SD1202 to 30 sheets per pass on the Fellowes Orion E 500, with 15, 20 and 25 sheets per pass on the models between.
How many sheets can a comb binding machine bind?
Up to 500 sheets with a 2 in comb on the Fellowes Quasar+ and Orion E 500, up to 425 sheets on the Tamerica 210PB and TCC242, up to 300 sheets with a 1 1/2 in comb on the Fellowes 5006801, and up to 200 sheets with a 22 mm comb on the RAYSON models.
What size comb do I need?
Match the comb to the stack: 22 mm combs bind up to 200 sheets, 1 1/2 in combs bind up to 300 sheets, and 2 in combs bind up to 425 or 500 sheets depending on the machine.
Can I punch longer documents?
Yes, with an open throat: the Tamerica 210PB lists a punch length of 12 in, the Akiles EcoBind-C lists a punch length of 12 in with an open throat, and the Tamerica TCC242 lists 14 in with an open throat.
More for your workspace
See the best comb binding machine, the best binding combs, the how to use a coil binding machine guide and the best binding machine for home use.





