Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›

Home office gear, compared spec by spec.

Amazon Black Friday Week deals
Desk Organizers and Whiteboards

Cork Board Custom Size: Choosing the Right Dimensions

A cork board custom size starts with the wall: measure the space, match the coverage of a felt tile set, and mount tiles that fit.

Cork Board Custom Size: Choosing the Right Dimensions

A cork board custom size starts with the wall, not the board: measure the space where notes, photos and reminders will live, then match a board or a set of tiles to that space. A large board suits an open wall, while felt tiles let you build the size you need across a wide or narrow wall. The steps below show how to measure, lay out tiles, and pick boards that fit a custom size.

OfficeKitHQ earns a commission when you buy through links on this page, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Affiliate disclosure.

The quick answer

Measure the width and height of the wall space, then compare it with the coverage each listing states: the boards here cover 48 x 36 inches and 47.24 x 35.43 inches. Felt tiles in a 12-pack let you split that coverage into sections, so a wide wall takes the full set as a block and a narrow wall takes tiles in a vertical strip. Check the thickness too: the listings here state 0.35 inch and 0.36 inch felt, and push pins need a soft surface they can sink into. Mount the tiles with the adhesive the listing provides, press firmly across each tile, and leave the adhesive time to bond before pinning anything.

Cork board custom size: measure first

Start with the wall, not the catalog. Mark the width and height you want to cover, then check the space around it: light switches, trim, door frames and the reach of the person pinning notes all shrink the usable area. Compare the marked space with the coverage the listing states. A 48 x 36 inch set covers a wide wall as a block, and a 47.24 x 35.43 inch set covers nearly the same area. When the marked space is wider than any set here, split the tiles into sections or add more tiles; when it is narrower, a bar-shaped tile set suits a wall strip where a square board will not fit.

Step 1: Measure the wall

Hold a tape at the edges of the space and mark the width and height with strips of tape, then step back and look at the shape: a wide, low space suits tiles in rows, while a tall, narrow space suits tiles in a column. Leave a margin around the marked area so pins near the edge do not hit trim, and check that the wall is clean, dry and smooth where adhesive tiles will sit. The listings here state coverage of 48 x 36 inches and 47.24 x 35.43 inches, so a marked space near those sizes takes a full set, and a marked space far outside them needs tiles split into sections.

Step 2: Lay out the tiles

Set the tiles on the floor in the shape of the marked space before anything sticks to the wall. The Ekkogo tiles are 11.81 x 11.81 inches each, and the listing states the full set covers 47.24 x 35.43 inches; the Baysola set covers 48 x 36 inches. Mix the order of the tiles so color and texture stay even across the board, and leave the bar-shaped tiles for narrow strips where square tiles will not fit. Count the tiles against the marked space: a 12-pack covers the stated area, and any gap at the edge means the layout needs another row or column, not stretched tiles.

Step 3: Mount the tiles

Mount the tiles with the adhesive the listing provides. Baysola lists a peel-and-stick backing: press firmly across the entire panel and allow the adhesive time to bond before pinning items. Ekkogo lists 72 removable adhesive tabs for its 12 tiles, which mount in minutes without tools or wall damage. Work from a corner of the marked space outward, press each tile flat, and check the edges before moving on: a tile that lifts at the edge will not hold pins well. Push pins are not included with the Baysola set, so have pins ready before the board goes up.

Boards that fit a custom size

The boards below cover the sizes in this guide, from full 48 x 36 inch sets to bar-shaped tiles for narrow walls: match the coverage to the space you marked, then check thickness and mounting before you order.

Ekkogo Felt Board 12-Pack

Ekkogo Felt Board 12-Pack

Ekkogo9.6/10 Office Score
i
The Office Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 12-pack of dense felt tiles covering 47.24 x 35.43 inches, each tile 11.81 x 11.81 inches and 0.36 inch thick, with 72 adhesive tabs included.

Pros

  • 12 tiles cover 47.24 x 35.43 inches with 72 adhesive tabs included
  • Each tile is 11.81 x 11.81 inches and 0.36 inch thick
  • Dense felt at 5.9 oz per square foot pins without crumbling, per the listing
  • Beveled edges give each tile a finished edge

Cons

  • No warranty is stated
  • Sound absorbing claim cannot be checked from specs
  • No push pins are listed as included
  • Listing states no hold duration for the adhesive tabs
Detailed Review

Ekkogo lists 12 dense felt tiles, each 11.81 x 11.81 inches and 0.36 inch thick, covering 47.24 x 35.43 inches with 72 removable adhesive tabs. The listing states 5.9 oz per square foot density, beveled edges, and felt that pins cleanly without crumbling, plus sound dampening from the dense felt. No warranty is stated, and push pins are not listed as included.

Who it's for: someone who wants a finished felt display with tabs included and a stated tile size. Who should skip it: anyone who wants a warranty term or a cork surface rather than felt.

Its Office Score of 9.6/10 comes from performance 29/35, build 21/25, value 21/25, safety not scored (non-powered gear) and warranty 0/5: 71 of 90 points, placed on our 9.2 to 9.8 scale.

Key Specifications
Tile size11.81 x 11.81 in
Thickness0.36 in
Coverage47.24 x 35.43 in
Adhesive tabs72 tabs

Figures as published on the retailer listing, collected 13 November 2026. Performance figures are manufacturer rated.

Safety and Warranty

What this listing states. This product does not plug in or run on a battery, so safety is not part of its score. No warranty term, so warranty scores zero. See How We Pick.

Anchor it. Anchor tall bookshelves and file cabinets to the wall with the supplied hardware or an anti-tip kit, load the lowest shelves and drawers first, and open one drawer at a time.

This is general buying information, not professional advice. Follow each product manual and local rules, and see our Safety Disclaimer.

Fluxynara 48x36 in Felt Board

Fluxynara 48x36 in Felt Board

Fluxynara9.6/10 Office Score
i
The Office Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A Fluxynara felt bulletin board and cork board alternative, 48 by 36 in, 12-pack of felt pin boards, for the 12-pack pick in this group.

Pros

  • 48x36 in stated
  • 12-pack stated
  • Felt pin boards
  • Cork alternative

Cons

  • No stated warranty term
  • No stated certification
  • Felt suits fewer pin users
  • 12-pack needs a large wall
Detailed Review

The Fluxynara listing states a felt bulletin board and cork board alternative, 48 by 36 in, in a 12-pack of felt pin boards, with 11.8, 0.35, 48, 36 and 394 in stated figures. The 12-pack is the standout in this group: it covers a large wall where a single board would be small. The felt surface suits a modern look. The 9mm stated figure rounds out the listing's dimensions.

Who it's for: a classroom that needs a wall of pin space. Who should skip it: anyone who wants real cork, or a warranty term.

The 48x36 in size also suits a project wall, where a 24x36 in board would limit the layout. The tile form also suits a custom arrangement, where a single board would be fixed.

The 12-pack also suits a school hallway, where a single board would be lost. The felt surface also suits a quiet room, where cork would look harsh.

Its Office Score of 9.6/10 comes from performance 27/35, build 21/25, value 21/25, safety not scored (non-powered gear) and warranty 0/5: 69 of 90 points, placed on our 9.2 to 9.8 scale.

Key Specifications
Size48x36 in
Pack12
TypeFelt pin board
BrandFluxynara

Figures as published on the retailer listing, collected 22 October 2026. Performance figures are manufacturer rated.

Safety and Warranty

What this listing states. This product does not plug in or run on a battery, so safety is not part of its score. No warranty term, so warranty scores zero. See How We Pick.

Fit the desk first. Check the stated size against your desk depth and keyboard tray, and charge or pair as the manual describes. No keyboard, mouse or wrist rest prevents or treats injury.

This is general buying information, not professional advice. Follow each product manual and local rules, and see our Safety Disclaimer.

Baysola Felt Board 12-Pack

Baysola Felt Board 12-Pack

Baysola9.5/10 Office Score
i
The Office Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 12-pack of felt tiles covering 48 x 36 inches, each tile 0.35 inch thick with a self-adhesive backing, in black.

Pros

  • 12 tiles cover 48 x 36 inches, the largest coverage here
  • 0.35 inch thick felt per the bullets, a soft pinning surface
  • Self-adhesive backing mounts without nails or screws
  • Tiles arrange horizontally, vertically or in separate sections

Cons

  • Push pins are not included
  • No warranty is stated
  • Peel-and-stick backing needs a clean, dry, smooth indoor surface
Detailed Review

Baysola lists a 12-pack of felt tiles covering 48 x 36 inches, each tile 0.35 inch thick per the bullets, with a self-adhesive backing that mounts to clean, dry, smooth indoor surfaces without nails or screws. The spec table gives product dimensions of 48.0 x 36.0 x 0.2 inches, which conflicts with the 0.35 inch thickness in the bullets; the bullets state the pinning surface, so the thickness reads as 0.35 inch. The listing states push pins are not included, and no warranty is stated.

Who it's for: someone covering a 48 x 36 inch wall area with felt tiles and no drilling. Who should skip it: anyone who needs the thickness confirmed in writing or wants pins included.

Its Office Score of 9.5/10 comes from performance 28/35, build 19/25, value 20/25, safety not scored (non-powered gear) and warranty 0/5: 67 of 90 points, placed on our 9.2 to 9.8 scale.

Key Specifications
Coverage48 x 36 in
Thickness0.35 in
Pack12 tiles
ColorBlack

Figures as published on the retailer listing, collected 13 November 2026. Performance figures are manufacturer rated.

Safety and Warranty

What this listing states. This product does not plug in or run on a battery, so safety is not part of its score. No warranty term, so warranty scores zero. See How We Pick.

Anchor it. Anchor tall bookshelves and file cabinets to the wall with the supplied hardware or an anti-tip kit, load the lowest shelves and drawers first, and open one drawer at a time.

This is general buying information, not professional advice. Follow each product manual and local rules, and see our Safety Disclaimer.

faainit Felt Bar Tiles

faainit Felt Bar Tiles

faainit9.4/10 Office Score
i
The Office Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

Felt bar tiles at 13 by 2 inches with 50 pins and 30 adhesive pads for narrow walls and tight corners.

Pros

  • 13 by 2-inch strip for narrow walls
  • 50 push pins included
  • 30 adhesive pads included
  • 0.35-inch thick, warp resistant

Cons

  • Felt, not cork
  • No tile count stated
  • No warranty term stated
  • Narrow format suits strips, not boards
Detailed Review

The listing states bar-shaped tiles at 13 by 2 inches made of 100% polyester felt in Linen Dusk, 0.35 inch thick and warp resistant, with 50 push pins and 30 adhesive pads. The pads mount on smooth walls, tiles or glass with zero residue. Note the material: these are felt boards, not cork, despite the cork-board title. The spec table lists 300 items, which does not match a tile count; the bullets name the pins and pads.

Who it's for: a narrow wall, desk side or bedside that needs a slim memo strip. Who should skip it: anyone who wants real cork tiles.

Its Office Score of 9.4/10 comes from performance 23/35, build 19/25, value 19/25, safety not scored (non-powered gear) and warranty 0/5: 61 of 90 points, placed on our 9.2 to 9.8 scale.

Key Specifications
Tile13 x 2 in bar
Thickness0.35 in
Extras50 pins, 30 pads
MaterialPolyester felt

Figures as published on the retailer listing, collected 22 October 2026. Performance figures are manufacturer rated.

Safety and Warranty

What this listing states. This product does not plug in or run on a battery, so safety is not part of its score. No warranty term, so warranty scores zero. See How We Pick.

Anchor it. Anchor tall bookshelves and file cabinets to the wall with the supplied hardware or an anti-tip kit, load the lowest shelves and drawers first, and open one drawer at a time.

This is general buying information, not professional advice. Follow each product manual and local rules, and see our Safety Disclaimer.

As an Amazon Associate I earn from qualifying purchases.

FAQ

What size cork board do I need?

Match the board to the wall space you marked: the sets here cover 48 x 36 inches and 47.24 x 35.43 inches, and tiles let you build a size between those figures by splitting the set. Measure the width and height first, then pick the set whose stated coverage fits the marked space.

How thick should a felt board be?

The listings here state 0.35 inch for the Baysola tiles and 0.36 inch for the Ekkogo tiles. Each states a soft pinning surface for lightweight papers, pictures, memos and cards, so either thickness pins the same kind of items; the difference is the tile size and the mounting, not the pinning.

Do felt boards need nails or screws?

No: the Baysola tiles list a self-adhesive backing and the Ekkogo tiles list 72 removable adhesive tabs, and each mounts without tools. The wall still needs to be clean, dry and smooth, per the Baysola listing, and the adhesive needs time to bond before you pin anything.

Can I arrange felt tiles in any shape?

Yes, within the tile count: the listings here are 12-packs, and the Baysola listing states the tiles arrange horizontally, vertically, or in separate sections. A bar-shaped tile set suits a narrow wall strip, and square tiles suit a wide block; count the tiles against the marked space before mounting.

Ekkogo Felt Board 12-Pack
Still deciding? Our top pickEkkogo Felt Board 12-Pack
Check price on Amazon

More for your workspace

See the best extra large bulletin boards, the best cork board key holders, the best bulletin board labels and every Office Machines and Storage guide.