A stack of printed pages waits beside an open binder on a home desk, and the holes miss the rings, so the pages sit crooked: that mismatch is what a different size hole punch is for. Hole diameter and hole spacing decide whether pages sit straight on the rings, and sheet capacity decides how many pages the punch handles at a time. This guide explains the sizes, the spacing and the sheet capacity to check, and the punches below show how those figures differ across models.
OfficeKitHQ earns a commission when you buy through links on this page, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Affiliate disclosure.
The quick answer
For a standard 3-ring binder, a 3-hole punch that makes 9/32 in holes is the match, and the punches here state that diameter apart from the Bostitch inPRESS, which states a standard 3-hole configuration. Sheet capacity runs from 12 sheets to 40 sheets across the punches here, so match the capacity to the stack. Reduced effort matters on a thick stack: the AFMAT, the Swingline and the Bostitch inPRESS each state 50% less force or effort.
Hole punch size chart
| Punch | Holes | Hole diameter | Sheet capacity | Amazon |
|---|---|---|---|---|
| AFMAT HP14 | 3-hole | 9/32 in | 40 sheets | View on Amazon |
| Swingline 74133 | 3-hole | 9/32 in | 20 sheets | View on Amazon |
| Bostitch HP15 | 3-hole | 9/32 in | 15 sheets | View on Amazon |
| Bostitch inPRESS 2101 | 3-hole | Not stated | 12 sheets |
Hole diameter is the size of each hole, and sheet capacity is the number of sheets the listing states the punch handles at a time. The Bostitch inPRESS states a standard 3-hole configuration, and its listing does not state a hole diameter.
Hole diameter and spacing
The hole diameter decides whether the holes fit the rings, and the spacing decides whether the holes line up with the rings on the binder. The AFMAT, the Swingline and the Bostitch HP15 each state 9/32 in holes for a standard 3-ring binder, and the Bostitch inPRESS states the same standard 3-hole configuration. The AFMAT has an adjustable paper guide and an end stopper, the Bostitch inPRESS has a paper guide, and the Swingline has an edge guide, so the stack stays in the same place and the holes land in the same spot on each sheet.
Sheet capacity
Sheet capacity is the number of sheets the punch handles in one press, and the figure to compare is the one the listing states. The AFMAT states 40 sheets, the Swingline states 20 sheets, the Bostitch HP15 states 15 sheets, and the Bostitch inPRESS states 12 sheets. A higher capacity suits a thick stack, while a lower capacity suits a thin stack and a smaller punch. Punch fewer sheets than the stated capacity when the paper is thick, and clear the chip tray when it fills.
The punches
The punches below cover the hole size and spacing this guide explains, so match the punch to the binder and the stack it has to handle.
| # | Product | Office Score | Buy |
|---|---|---|---|
| 1 | Bostitch inPRESS 12 | 9.6/10 | Buy on Amazon |
| 2 | AFMAT HP14 | 9.6/10 | Buy on Amazon |
| 3 | Swingline 74133 | 9.6/10 | Buy on Amazon |
| 4 | Bostitch HP15 | 9.6/10 | Buy on Amazon |

Bostitch inPRESS 12
A 12-sheet 3-hole punch with 50% less force, an integrated ruler and a handle lock for storage.
Pros
- Needs 50% less force, per the listing
- Integrated ruler for measuring
- Handle lock holds the punch closed for storage
- Paper guide keeps documents in place for hole placement
Cons
- Punches up to 12 sheets, fewer than the other punches here
- No hole diameter is stated
- No non-slip base is stated
- No comfort handle is stated
Detailed Review
Bostitch lists the inPRESS 12 as a reduced-effort 3-hole punch with EZ Squeeze technology, metal construction and No-Jam technology. It punches up to 12 sheets, needs 50% less force, and has an integrated ruler, a paper guide and an easy-clean chip tray. The handle locks for storage, and the punch makes a standard 3-hole configuration. The spec table lists 11.0 by 3.0 by 1.63 in, a 0.9 lb item weight and a 2 year limited Warranty.
Who it's for: someone who punches a thin stack and wants a ruler, a paper guide and a handle lock. Who should skip it: anyone who needs more than 12 sheets at a time or a stated hole diameter.
Its Office Score of 9.6/10 comes from performance 28/35, build 20/25, value 20/25, safety not scored (non-powered gear) and warranty 3/5: 71 of 90 points, placed on our 9.2 to 9.8 scale.
Key Specifications
| Sheet capacity | 12 sheets |
|---|---|
| Size | 11.0 x 3.0 x 1.63 in |
| Item weight | 0.9 lb |
| Warranty | 2 year limited Warranty |
These specs mirror the retailer listing as of 13 November 2026; performance figures are stated by the brand.
Safety and Warranty
What this listing states. This product does not plug in or run on a battery, so safety is not part of its score. 2 year limited Warranty. It does not say everything a buyer needs, such as who pays return shipping, so warranty scores 3 of 5. See How We Pick.
Anchor it. Anchor tall bookshelves and file cabinets to the wall with the supplied hardware or an anti-tip kit, load the lowest shelves and drawers first, and open one drawer at a time.
This is general buying information, not professional advice. Follow each product manual and local rules, and see our Safety Disclaimer.
Pros
- Punches up to 40 sheets of 70 gsm paper at a time
- Labor-saving lever needs 50% less hand pressure, per the listing
- Large chip tray holds more cutouts between empties
- Adjustable paper guide and end stopper align each stack
Cons
- No warranty term is stated
- No integrated ruler is stated
- 6.7 in wide, broader than the Bostitch punches
Detailed Review
AFMAT lists the HP14 as a heavy-duty 3-hole punch with sturdy metal construction, 3 sharp puncher pins and a labor-saving lever that needs 50% less hand pressure. It punches up to 40 sheets of 70 gsm paper at a time with no-jam technology, making 9/32 in holes, and the adjustable paper guide and end stopper hold the stack in place. The large chip tray holds the cutouts, and the bottom cover opens to clear a jam. The title names the color Green while the spec table lists Turquoise, so the color is Green per the title. The spec table lists 9.8 by 6.7 by 7.1 in, with no warranty term stated.
Who it's for: someone who punches a 40-sheet stack and wants reduced effort with a large chip tray. Who should skip it: anyone who wants a warranty term in writing or a smaller punch for a thin stack.
Its Office Score of 9.6/10 comes from performance 33/35, build 22/25, value 22/25, safety not scored (non-powered gear) and warranty 0/5: 77 of 90 points, placed on our 9.2 to 9.8 scale.
Key Specifications
| Sheet capacity | 40 sheets |
|---|---|
| Hole diameter | 9/32 in |
| Size | 9.8 x 6.7 x 7.1 in |
| Paper | 70 gsm |
These specs mirror the retailer listing as of 13 November 2026; performance figures are stated by the brand.
Safety and Warranty
What this listing states. This product does not plug in or run on a battery, so safety is not part of its score. No warranty term, so warranty scores zero. See How We Pick.
Anchor it. Anchor tall bookshelves and file cabinets to the wall with the supplied hardware or an anti-tip kit, load the lowest shelves and drawers first, and open one drawer at a time.
This is general buying information, not professional advice. Follow each product manual and local rules, and see our Safety Disclaimer.

Swingline 74133
A 20-sheet 3-hole punch with 9/32 in holes, a SmartTouch comfort handle and 50% reduced effort.
Pros
- Punches up to 20 sheets at a time
- Needs 50% less manual force than traditional punches, per the listing
- Wide, soft grip comfort handle locks closed for storage
- 9/32 in holes match a standard 3-ring binder
Cons
- One-year warranty is shorter than the 2-year term on the Bostitch inPRESS
- No removable chip tray is stated, only a base opening for disposal
- No integrated ruler is stated
- 12.375 in length is longer than the Bostitch HP15 at 10.8 in
Detailed Review
Swingline lists the 74133 as a durable 3-hole punch with strong metal construction, a SmartTouch comfort handle and an edge guide for consistent punch alignment. It punches up to 20 sheets at a time, making 9/32 in holes, and the maker states 50% less manual force than traditional hole punches. The wide, soft grip handle locks in the closed position for storage, and a base opening allows chip disposal while the hole pattern in the base shows when the chip tray is full. The spec table lists 12.375 by 2.375 by 4.81 in and a 1.0 lb item weight, with a manufacturer's one-year warranty.
Who it's for: someone who punches a 20-sheet stack and wants reduced effort with a handle that locks closed. Who should skip it: anyone who needs a longer warranty term or a removable chip tray.
Its Office Score of 9.6/10 comes from performance 30/35, build 21/25, value 21/25, safety not scored (non-powered gear) and warranty 0/5: 72 of 90 points, placed on our 9.2 to 9.8 scale.
Key Specifications
| Sheet capacity | 20 sheets |
|---|---|
| Hole diameter | 9/32 in |
| Size | 12.375 x 2.375 x 4.81 in |
| Item weight | 1.0 lb |
These specs mirror the retailer listing as of 13 November 2026; performance figures are stated by the brand.
Safety and Warranty
What this listing states. This product does not plug in or run on a battery, so safety is not part of its score. No warranty term, so warranty scores zero. See How We Pick.
Anchor it. Anchor tall bookshelves and file cabinets to the wall with the supplied hardware or an anti-tip kit, load the lowest shelves and drawers first, and open one drawer at a time.
This is general buying information, not professional advice. Follow each product manual and local rules, and see our Safety Disclaimer.

Bostitch HP15
A 15-sheet 3-hole punch with 9/32 in holes, all-metal construction and a non-slip base.
Pros
- Punches up to 15 sheets at a time
- All-metal construction for heavy-duty use
- 9/32 in holes align with standard 3-ring binders
- Non-slip base keeps the punch stable on the desk
Cons
- No warranty term is stated
- No reduced-effort feature is stated
- No paper guide is stated
- No handle lock is stated
Detailed Review
Bostitch lists the HP15 as a metal 3-hole punch with a 15-sheet capacity, sharp steel punch heads and an easy-empty chip tray. It makes clean 9/32 in holes that align with standard 3-ring binders, and the non-slip base keeps the punch stable on the desk. The spec table lists 10.8 by 1.9 by 2.6 in, with no warranty term stated.
Who it's for: someone who wants a simple metal punch for a 15-sheet stack and a non-slip base. Who should skip it: anyone who wants reduced effort, a paper guide or a warranty term.
Its Office Score of 9.6/10 comes from performance 28/35, build 21/25, value 20/25, safety not scored (non-powered gear) and warranty 0/5: 69 of 90 points, placed on our 9.2 to 9.8 scale.
Key Specifications
| Sheet capacity | 15 sheets |
|---|---|
| Hole diameter | 9/32 in |
| Size | 10.8 x 1.9 x 2.6 in |
| Construction | All-metal |
These specs mirror the retailer listing as of 13 November 2026; performance figures are stated by the brand.
Safety and Warranty
What this listing states. This product does not plug in or run on a battery, so safety is not part of its score. No warranty term, so warranty scores zero. See How We Pick.
Anchor it. Anchor tall bookshelves and file cabinets to the wall with the supplied hardware or an anti-tip kit, load the lowest shelves and drawers first, and open one drawer at a time.
This is general buying information, not professional advice. Follow each product manual and local rules, and see our Safety Disclaimer.
As an Amazon Associate I earn from qualifying purchases.
How to choose a different size hole punch
Match the hole size to the binder
Start with the binder: a standard 3-ring binder takes 9/32 in holes in the standard 3-hole configuration, and the AFMAT, the Swingline and the Bostitch HP15 each state that diameter. Check the hole diameter on the listing before you buy, since the diameter is the figure that decides whether the pages sit straight on the rings.
Match the capacity to the stack
Count the sheets in the stack you punch most, then pick a punch whose stated capacity covers it. The AFMAT states 40 sheets, the Swingline states 20 sheets, the Bostitch HP15 states 15 sheets, and the Bostitch inPRESS states 12 sheets. A punch with reduced effort helps on a thick stack: the AFMAT, the Swingline and the Bostitch inPRESS each state 50% less force or effort.
Check the tray and the guide
Look at the chip tray and the paper guide before you buy. The AFMAT has a large chip tray, the Bostitch inPRESS has an easy-clean chip tray, the Bostitch HP15 has a chip tray that opens for cleanup, and the Swingline has an opening in the base for chip disposal. The AFMAT has an adjustable paper guide and an end stopper, the Bostitch inPRESS has a paper guide, and the Swingline has an edge guide.
FAQ
What size holes does a standard 3-hole punch make?
The AFMAT, the Swingline and the Bostitch HP15 each state 9/32 in holes, and the Bostitch inPRESS states a standard 3-hole configuration. Check the hole diameter on the listing, since the diameter is the figure that decides whether the pages fit the rings.
How many sheets can a 3-hole punch handle at once?
It depends on the punch. The AFMAT states 40 sheets, the Swingline states 20 sheets, the Bostitch HP15 states 15 sheets, and the Bostitch inPRESS states 12 sheets. Match the stated capacity to the stack you punch most.
Do all 3-hole punches fit the same binder?
The AFMAT, the Swingline and the Bostitch HP15 state 9/32 in holes in the standard 3-hole configuration, and the Bostitch inPRESS states the standard 3-hole configuration. A standard 3-ring binder takes that hole pattern, so check the hole diameter and the paper guide before you buy.
What does reduced effort mean on a hole punch?
Reduced effort means the punch needs less hand force for each press. The AFMAT states 50% reduced effort, the Swingline states 50% less manual force, and the Bostitch inPRESS states 50% less force. A punch with reduced effort helps on a thick stack.
More for your workspace
See the hole punch size guide, the 3-ring binder sizes, the best rolling filing cabinets and every office storage guide.










