Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›

Home office gear, compared spec by spec.

Amazon Black Friday Week deals
Office Machines and Storage

Hole Punch Size: Hole Diameter and Spacing Guide

Hole punch size comes down to the hole diameter and the sheet capacity, and the punches here range from 20 sheets to 45 sheets.

Hole Punch Size: Hole Diameter and Spacing Guide

A stack of pages waits for the binder, and hole punch size is the detail that decides whether the holes line up with the rings. Every punch in this guide makes a hole pattern for a standard binder, and the sections below explain the hole size, the sheet capacity and the fit before the gear section shows the punches.

OfficeKitHQ earns a commission when you buy through links on this page, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Affiliate disclosure.

Hole punch size: the quick answer

A hole punch size comes down to the hole diameter and the sheet capacity. The AFMAT, the Swingline and the Bostitch HP20 (on Amazon) state a 9/32 inch hole diameter, and the Bostitch HP40 does not state a diameter. Sheet capacity runs from 20 sheets on the Bostitch HP20 to 45 sheets on the Swingline, with the Bostitch HP40 and the AFMAT at 40 sheets. All are metal punches, and each states 50% easier punching or 50% less force.

Hole punch size at a glance

Punch Sheets Hole diameter Size Amazon
Bostitch HP40 40 sheets Not stated Not stated View on Amazon
Swingline 74136 45 sheets 9/32 inch 12.3 x 3.1 x 7.8 inches View on Amazon
Bostitch HP20 20 sheets 9/32 inch 11.1 x 2.0 x 4.4 inches View on Amazon
AFMAT HP14 40 sheets 9/32 inch 9.8 x 6.7 x 7.1 inches View on Amazon

Use the table to match the punch to the stack: check the capacity, then the hole diameter, then the size on the desk. The Bostitch HP40 states no hole diameter and no dimensions, and the AFMAT height follows the bullets, since the spec table states a different figure.

Hole diameter and spacing

The hole diameter and the hole pattern decide whether the punched pages fit the binder rings. The AFMAT, the Swingline and the Bostitch HP20 state 9/32 inch holes, and the Bostitch HP40 does not state a diameter. All make a 3-hole pattern for a binder, and the paper guide on the Bostitch HP40 and the AFMAT, and the edge guide on the Swingline, keep the holes aligned so the pages sit straight on the rings. Match the pattern to the binder the pages go into: see 3 ring binder sizes for the ring sizes.

Sheet capacity: 20 to 45 sheets

Sheet capacity decides how much of a stack goes through in a press. The Bostitch HP20 punches up to 20 sheets, the Bostitch HP40 and the AFMAT punch up to 40 sheets, and the Swingline punches up to 45 sheets. The AFMAT states its 40-sheet capacity for 70 gsm paper. Match the capacity to the thickest stack you punch at a time, and split a thicker stack across presses.

Punching effort and handles

Every punch here states 50% easier punching or 50% less force, but the mechanism differs. The Bostitch HP20 states 50% easier punching, the Bostitch HP40 uses EZ Squeeze technology to reduce punching force by 50%, the AFMAT states 50% reduced effort with a labor-saving lever, and the Swingline states 50% less manual force with SmartTouch. The Bostitch HP20 handle locks for compact storage, the Swingline handle locks in closed position for storage, the Bostitch HP40 states a non-slip rubber base and a removable chip tray, and the AFMAT states a large chip tray.

The gear: hole punches for the binder

The punches below cover the range from a 20-sheet desk punch to a 45-sheet heavy-duty punch, and the choice turns on capacity, effort and the size on the desk.

Bostitch HP40

Bostitch HP40

Bostitch9.7/10 Office Score
i
The Office Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A heavy-duty 3-hole punch with a 40-sheet capacity, all-metal construction, EZ Squeeze technology and a limited lifetime warranty.

Pros

  • 40-sheet capacity for large document stacks
  • All-metal construction for years of daily use
  • EZ Squeeze technology reduces punching force by 50%
  • Integrated paper guide keeps every document centered

Cons

  • No hole diameter is stated on this listing
  • No dimensions are stated on this listing
  • No locking handle is stated for storage
  • 40-sheet capacity is below the Swingline at 45 sheets
Detailed Review

Bostitch lists the HP40 as a heavy-duty 3-hole punch with a 40-sheet capacity, all-metal construction and EZ Squeeze technology that reduces punching force by 50%. The integrated paper guide keeps every document centered, the chip tray removes for cleaning, and the non-slip rubber base holds the punch steady. The listing states a limited lifetime warranty. No hole diameter and no dimensions are stated on this listing.

Who it's for: home workers and offices that punch large stacks and want a lifetime warranty with a guide that keeps documents centered. Who should skip it: anyone who needs a stated hole diameter or a locking handle for storage.

Its Office Score of 9.7/10 comes from performance 32/35, build 22/25, value 21/25, safety 4/10 and warranty 4/5: 83 of 100 points, placed on our 9.2 to 9.8 scale.

Key Specifications
Capacity40 sheets
ConstructionAll-metal
GuideIntegrated paper guide
TrayRemovable chip tray

These specs mirror the retailer listing as of 13 November 2026; performance figures are stated by the brand.

Safety and Warranty

What this listing states. Non-slip rubber base for stability, as the listing states, so safety scores 4 of 10. Limited Lifetime Warranty. It does not say everything a buyer needs, such as who pays return shipping, so warranty scores 4 of 5. See How We Pick.

Shredder and printer safety. Keep hair, ties, jewelry, children and pets away from the feed slot, use the safety lock, unplug when not in use, and give printers and adapters room to vent.

This is general buying information, not professional advice. Follow each product manual and local rules, and see our Safety Disclaimer.

Bostitch HP20

Bostitch HP20

Bostitch9.6/10 Office Score
i
The Office Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 20-sheet 3-hole punch with a metal body, 9/32 inch holes, a locking handle and a 3-year limited warranty.

Pros

  • 9/32 inch holes in a standard 3-hole configuration
  • Metal construction for durability
  • 50% easier punching up to 20 sheets
  • Locking handle and rubber base pad for storage and stability

Cons

  • 20-sheet capacity is the lowest here
  • No paper guide is stated for centering documents
  • No chip tray is stated
  • No item weight is stated on this listing
Detailed Review

Bostitch lists the HP20 as a 20-sheet 3-hole punch with a metal body and 9/32 inch holes. The listing states 50% easier punching, a locking handle for compact storage and a rubber base pad for stability. The punch measures 11.1 x 2.0 x 4.4 inches, and the listing states a 3 year limited warranty. No paper guide and no chip tray are stated.

Who it's for: home workers who punch small stacks and want a compact metal punch that locks shut for storage. Who should skip it: anyone who punches thick stacks or wants a paper guide and a chip tray.

Its Office Score of 9.6/10 comes from performance 28/35, build 20/25, value 20/25, safety 5/10 and warranty 3/5: 76 of 100 points, placed on our 9.2 to 9.8 scale.

Key Specifications
Capacity20 sheets
Hole diameter9/32 inch
Dimensions11.1 x 2.0 x 4.4 inches
HandleLocking handle

These specs mirror the retailer listing as of 13 November 2026; performance figures are stated by the brand.

Safety and Warranty

What this listing states. Locking handle for compact storage and rubber base pad for stability, as the listing states, so safety scores 5 of 10. 3 Year Limited. It does not say everything a buyer needs, such as who pays return shipping, so warranty scores 3 of 5. See How We Pick.

Shredder and printer safety. Keep hair, ties, jewelry, children and pets away from the feed slot, use the safety lock, unplug when not in use, and give printers and adapters room to vent.

This is general buying information, not professional advice. Follow each product manual and local rules, and see our Safety Disclaimer.

Swingline 74136

Swingline 74136

Swingline9.6/10 Office Score
i
The Office Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 3-hole punch with a 45-sheet capacity, SmartTouch low effort, fixed heads and an edge guide, with a 1-year warranty.

Pros

  • 45-sheet capacity, the highest here
  • 9/32 inch holes with fixed heads and an edge guide
  • SmartTouch low effort, 50% less manual force
  • Comfort handle locks in closed position for storage

Cons

  • 1-year warranty is shorter than the Bostitch HP40 lifetime warranty
  • No removable chip tray is stated, only an opening for chip disposal
  • Longest punch here at 12.3 inches
  • No non-slip rubber base is stated, unlike the Bostitch punches
Detailed Review

Swingline lists the 74136 as a 3-hole punch with a 45-sheet capacity, SmartTouch low effort and 9/32 inch holes. The fixed heads and edge guide keep punch alignment consistent, the wide soft grip handle locks in closed position for storage, and an opening in the base allows quick chip disposal. The listing states 50% less manual force than traditional hole punches and a manufacturer's 1-year warranty. The punch measures 12.3 x 3.1 x 7.8 inches and the listed weight is 2.37 lb.

Who it's for: home workers who punch the thickest stacks and want the highest capacity with a handle that locks shut. Who should skip it: anyone who wants a lifetime warranty or a removable chip tray.

Its Office Score of 9.6/10 comes from performance 33/35, build 22/25, value 21/25, safety 5/10 and warranty 0/5: 81 of 100 points, placed on our 9.2 to 9.8 scale.

Key Specifications
Capacity45 sheets
Hole diameter9/32 inch
Dimensions12.3 x 3.1 x 7.8 inches
Item weight2.37 lb

These specs mirror the retailer listing as of 13 November 2026; performance figures are stated by the brand.

Safety and Warranty

What this listing states. Handle locks in closed position for storage, as the listing states, so safety scores 5 of 10. No warranty term, so warranty scores zero. See How We Pick.

Shredder and printer safety. Keep hair, ties, jewelry, children and pets away from the feed slot, use the safety lock, unplug when not in use, and give printers and adapters room to vent.

This is general buying information, not professional advice. Follow each product manual and local rules, and see our Safety Disclaimer.

AFMAT HP14

AFMAT HP14

AFMAT9.5/10 Office Score
i
The Office Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A heavy-duty 3-hole punch with a 40-sheet capacity, 9/32 inch holes, 50% reduced effort and a large chip tray.

Pros

  • 40-sheet capacity for 70 gsm paper
  • 9/32 inch holes with 3 sharp puncher pins
  • 50% reduced effort with a labor-saving lever
  • Large chip tray and adjustable paper guide

Cons

  • 1-year warranty is shorter than the Bostitch HP40 lifetime warranty
  • No locking handle is stated for storage
  • 40-sheet capacity is stated for 70 gsm paper
Detailed Review

AFMAT lists the HP14 as a heavy-duty 3-hole punch with a 40-sheet capacity, 9/32 inch holes and 50% reduced effort. The bullets state a 9.8 x 6.7 x 7.1 inch size, but the spec table states 9.8 x 6.7 x 2.35 inches, so the bullets and the spec table do not agree on height; the bullets are the figure to trust. The listing states 3 sharp puncher pins, a large chip tray, an adjustable paper guide and a 1 year warranty from the purchase date. The 40-sheet capacity is stated for 70 gsm paper.

Who it's for: home workers who punch 40-sheet stacks and want a large chip tray with a guide that adjusts to the paper length. Who should skip it: anyone who wants the dimensions settled or a warranty longer than 1 year.

Its Office Score of 9.5/10 comes from performance 29/35, build 20/25, value 21/25, safety 0/10 and warranty 2/5: 72 of 100 points, placed on our 9.2 to 9.8 scale.

Key Specifications
Capacity40 sheets of 70 gsm paper
Hole diameter9/32 inch
Dimensions9.8 x 6.7 x 7.1 inches
TrayLarge chip tray

These specs mirror the retailer listing as of 13 November 2026; performance figures are stated by the brand.

Safety and Warranty

What this listing states. This product does not plug in or run on a battery, so safety is not part of its score. 1 year warranty from the purchase date. It does not say everything a buyer needs, such as who pays return shipping, so warranty scores 2 of 5. See How We Pick.

Shredder and printer safety. Keep hair, ties, jewelry, children and pets away from the feed slot, use the safety lock, unplug when not in use, and give printers and adapters room to vent.

This is general buying information, not professional advice. Follow each product manual and local rules, and see our Safety Disclaimer.

As an Amazon Associate I earn from qualifying purchases.

FAQ

What size hole does a hole punch make?

The AFMAT, the Swingline and the Bostitch HP20 state 9/32 inch holes. The Bostitch HP40 does not state a hole diameter.

How many sheets can a hole punch punch at once?

The Bostitch HP20 punches up to 20 sheets, the Bostitch HP40 and the AFMAT punch up to 40 sheets, and the Swingline punches up to 45 sheets. The AFMAT states its 40-sheet capacity for 70 gsm paper.

Do hole punches need much force to use?

Each punch here states 50% easier punching or 50% less force. The Bostitch HP40 uses EZ Squeeze technology, the AFMAT uses a labor-saving lever, and the Swingline uses SmartTouch.

What warranty do hole punches come with?

The Bostitch HP40 states a limited lifetime warranty, the Bostitch HP20 states a 3 year limited warranty, and the AFMAT and the Swingline state a 1 year warranty.

Bostitch HP40
Still deciding? Our top pickBostitch HP40
Check price on Amazon

More for your workspace

See the 3 ring binder sizes, the binder clips sizes, the best heavy duty D ring binders and the desk organizers and whiteboards guides.