Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›

Home office gear, compared spec by spec.

Amazon Black Friday Week deals
Monitor Mounts, Keyboards and Mice

Green Screen Lighting Setup for Home Video Calls

A green screen needs its own light, separate from the light on your face, and the kits here pair a green backdrop with softboxes, umbrellas and daylight bulbs.

Green Screen Lighting Setup for Home Video Calls

The webcam blinks on for the morning call, and the wall behind the chair shows a bookshelf, a door frame and a pile of laundry. The green screen hangs behind the desk, but the picture still looks patchy, and green screen lighting setup is the part that makes the screen disappear instead of glowing in patches. This guide shows how to place the lights, match the color and keep the screen flat, so the call shows a clean background instead of a green glow.

OfficeKitHQ earns a commission when you buy through links on this page, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Affiliate disclosure.

OfficeKitHQ earns a commission when you buy through links on this page, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Affiliate disclosure.

Green screen lighting setup: the quick answer

A green screen needs its own light, separate from the light on your face. The screen should be lit evenly from side to side, the subject lit from the front, and the bulbs should match in color temperature, such as 5500K or 5600K. The kits here pair a green backdrop with softboxes or umbrellas and bulbs from 30W to 135W, so the screen and the subject can each have their own light.

What the kits pair with a green screen

Kit Green screen Lights Bulbs
LINCO AM169 5x10ft 4 stands, 2 softboxes, 2 umbrellas 30W, 5700K
EMART ULK45 6x9ft 2 softboxes, 2 umbrellas 50W, 5500K
RaLeno PS55 6x9ft 2 softboxes, 2 umbrellas 50W, 45W, 5500K
EMART BSG-2ULK 6x9ft 2 umbrellas 45W, 5500K
WEPHOTOJET WE1001 6x9ft 2 softboxes, 2 umbrellas 85W, 45W
ShowMaven PLK72 5.25×9.2ft 3 softboxes, 5 umbrellas 65W
ShowMaven SM-4902 5.9×9.2ft 4 umbrellas 135W

Every kit in the table pairs a green backdrop with at least one softbox or umbrella, and each of them lists bulbs in daylight color, from 5500K to 5700K. The bulb watt figures run from 30W to 135W, so a kit for a small room and a kit for a full studio read very differently on the box. Match the kit to the room: a backdrop that fills the wall behind the desk needs stands that reach the height of the room.

Step 1: Hang the screen flat and wide enough

Hang the green backdrop flat, with no folds or wrinkles across the middle, since a fold catches the light and shows as a dark line on the call. The backdrops here measure 5x10ft, 6x9ft, 5.25×9.2ft or 5.9×9.2ft, and the stands adjust from 2.6ft to 8.5ft in height, so check the width of the wall behind the desk before you buy. Clamp the top edge to the stand and let the cloth fall straight, then step back and look at the screen on the camera preview.

Step 2: Light the screen first, then the subject

Point a softbox or an umbrella at the green screen first, so the screen itself is lit evenly from side to side, then add a light for your face. The kits here give the screen its own lights: the LINCO kit (on Amazon) has 4 stands with 2 softboxes and 2 umbrellas, and the RaLeno kit (on Amazon) has 4 stands with 2 softboxes and 2 umbrellas. Keep the screen light off your face and the face light off the screen, so each light does one job.

Step 3: Match the color temperature

Match the color temperature across every bulb in the room, so the screen and your face read the same color on the call. The kits here use daylight bulbs: LINCO lists 5700K, EMART and RaLeno list 5500K, and ALTSON lists 5600K. A bulb with a different color temperature makes the screen look green in one corner and gray in another, so check the K figure on every bulb before you buy.

Step 4: Set the stands to the height of the room

Set the stands so the top of the backdrop clears the top of the frame on the call. The EMART stand adjusts from 2.6ft to 8.5ft in height and from 5ft to 10ft in width, the RaLeno stand adjusts from 4.3 feet to 8.5 feet in height and from 5 feet to 10 feet in width, and the RaLeno light stands adjust from 26.7 inches to 78.7 inches. The ShowMaven stands adjust from 27 in to 78 in, and the WEPHOTOJET stands (on Amazon) adjust from 28 in to 78 in. Measure the ceiling height and the width of the wall before you buy, and leave room for the stand legs on the floor.

A small desk setup

For a small desk, a single LED panel can light the face without stands. The ALTSON panel measures 5.73 by 3.78 inches, with 70 lamp beads, 1000lm brightness and 9 color filters, and its tripod extends from 27.19 in to 48.39 in. It runs on USB power with a 5V 2A charger, and the cable controls brightness from 10% to 100%. A panel like this lights the face for a call, but it does not light a green screen, so pair it with a screen kit when the background must disappear.

FAQ

How many lights do I need for a green screen?

At least one light for the screen and one light for your face. The kits here include 4 stands with softboxes and umbrellas, such as the LINCO kit with 2 softboxes and 2 umbrellas, so the screen and the subject each have their own light.

What color temperature should green screen lights be?

Daylight color, and the same figure on every bulb. The kits here list 5500K, 5600K or 5700K, so pick one figure and match every bulb in the room to it.

Can I use a green screen in a small room?

Yes, when the backdrop fits the wall and the stands fit the floor. The backdrops here measure 5x10ft, 6x9ft, 5.25×9.2ft or 5.9×9.2ft, and the ALTSON panel lights the face from a tripod that extends from 27.19 in to 48.39 in, so measure the wall and the floor space before you buy.

Do green screen kits come with a warranty?

Most of the kits here list a 1 year warranty, including LINCO, EMART, RaLeno, ALTSON and ShowMaven. The WEPHOTOJET kit lists a limited warranty, so check the listing for the term before you buy.

How bright should the lights be?

Bright enough to light the screen evenly, with the same color on every bulb. The kits here list bulbs from 30W to 135W, and the ALTSON panel lists 1000lm with brightness from 10% to 100%, so dim the face light to match the screen instead of raising the screen light.

More for your workspace

See the how to use a green screen for video calls, the best green screen light bars, the best ring light and microphone kits and the computer peripherals guides.