A video call starts, the monitor stays dark, and the cable running from the laptop to the screen is the first suspect. The screen, the laptop and the cable each have a part in the picture, and the cable is the part people check last. HDMI cable specs are the version, bandwidth, resolution, refresh rate, length and certification a listing states, and they decide whether the picture the device sends is the picture the screen shows.
OfficeKitHQ earns a commission when you buy through links on this page, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Affiliate disclosure.
The quick answer
For a desk screen, read the version and the bandwidth first. HDMI 2.1 cables in the listings state 48Gbps, with 8K at 60Hz and 4K at 240Hz, while HDMI 2.0 states 18Gbps. Match the cable to the screen and the device, pick a length that reaches without coiling behind the desk, and look for the certification the listing states.
HDMI Cable Specs: Versions and Bandwidth
Bandwidth is the figure that sets the ceiling for a cable. Every cable in the listings states 48Gbps and HDMI 2.1, with backward compatibility to HDMI 2.0, 1.4, 1.3, 1.2 and 1.1 stated across the listings. The table below lines up the versions the listings describe.
| Version | Bandwidth stated | Resolution and refresh stated | Where the figure comes from |
|---|---|---|---|
| HDMI 2.1 | 48Gbps | 8K at 60Hz, 4K at 240Hz, 4K at 120Hz | Anker, Acer, Silkland and UGREEN listings |
| HDMI 2.0 | 18Gbps | Not stated in these listings | UGREEN comparison figure |
UGREEN states that its 48Gbps cable is faster than HDMI 2.0 at 18Gbps, and Highwings states 48Gbps as 6GB/s. The 18Gbps figure is a comparison figure from one listing, so read it as the contrast the maker draws, not as a figure every HDMI 2.0 listing states.
Step 1: Match the version to the screen
Start with what the screen and the device can show. The listings state 8K at 60Hz and 4K at 240Hz, 120Hz and 144Hz for HDMI 2.1 cables, with 5K at 120Hz and 90Hz, 2K at 240Hz and 165Hz, 1440p and 1080p stated on some listings. If the screen tops out at 4K at 60Hz, a 48Gbps cable still works, since the listings state backward compatibility with earlier HDMI versions. Check the screen and the device for the resolution and refresh they support, then match the cable to the lower figure.
Step 2: Check bandwidth and resolution
Bandwidth decides how much picture the cable can carry, and resolution and refresh rate decide how much picture the screen asks for. The listings state 8K at 7680 x 4320 from UGREEN and Cable Matters, 10K at 120Hz from Monoprice with Display Stream Compression, and 12-bit color with 4:4:4 RGB from Cable Matters. Cable Matters also states a 21:9 cinema aspect ratio, 32 audio channels and a 1536 kHz sampling rate. A cable that states 48Gbps covers the resolutions in the table above, while a listing that states no bandwidth figure leaves the question open.
Step 3: Pick the length
Measure the run from the device to the screen, then pick a length that reaches with slack. The listings state lengths of 3ft, 6ft, 6.6ft, 10ft and 16ft, with Acer listing 3ft, 6ft and 10ft options and Cable Matters listing a 3-pack of 6.6ft cables in three colors. UGREEN lists 10FT and 16FT cables, Anker lists 6FT and 10ft cables, and Highwings lists a 10FT cable in 3M. A cable that is too long coils behind the desk, and a cable that is too short pulls at the ports. The HDMI cable size guide has a length and connector chart for the same figures.
Step 4: Look for certification and build
Certification is the check that the cable meets the HDMI 2.1 standard. Silkland states that only 1% of HDMI cables on the market have passed HDMI 2.1 certification, with a QR code for verification, and Anker, UGREEN, Cable Matters, Zeskit and Monoprice state Certified Ultra High Speed or HDMI 2.1 Certified in their titles. Build details in the listings include braided nylon jackets, aluminum alloy shells and nickel-plated connectors, and Anker states that its cable withstands up to 1,000 bends. Warranty terms in the listings include an 18-month warranty from Anker, a 2 Year Manufacturer warranty from UGREEN and a Lifetime Warranty from Monoprice. The HDMI cable types guide explains which type to buy for each setup.
Audio, HDR and extra features
A cable carries audio as well as video. The listings state eARC and ARC, Dolby Atmos, Dolby Vision, DTS:X and HDCP 2.2 and 2.3, with HDR10 and HDR10+ on several listings. VRR, ALLM, QFT and QMS appear in the listings for gaming, and Monoprice states eARC with Dolby Atmos and DTS:X. Ethernet and 3D support appear in the UGREEN listing, and the USB-C cables and video guide covers the other cable on many desks. Match the audio features to the soundbar or receiver, since the cable can only carry what the devices support.
FAQ
What does 48Gbps mean on an HDMI cable?
It is the bandwidth the listings state for HDMI 2.1 cables: 48Gbps, against 18Gbps for HDMI 2.0 as stated by UGREEN. Higher bandwidth carries higher resolution and refresh rates, such as 8K at 60Hz and 4K at 240Hz.
Is an HDMI 2.1 cable needed for 4K?
It depends on the refresh rate. The listings state 4K at 60Hz, 120Hz, 144Hz and 240Hz for HDMI 2.1 cables at 48Gbps. A screen that shows 4K at 120Hz and above calls for the 48Gbps figure, while a screen that shows 4K at 60Hz can use a cable with a lower bandwidth figure.
How long can an HDMI cable be?
The listings state lengths from 3ft to 16ft, with 6ft, 6.6ft and 10ft appearing across several listings. Measure the run and pick a length that reaches with slack.
What is HDMI eARC?
Enhanced Audio Return Channel, stated in the listings as eARC, sends audio from the TV to a soundbar or receiver, including Dolby Atmos and DTS:X. Look for eARC in the listing when the soundbar needs it.
More for your workspace
See the HDMI cable types guide, the HDMI cable size guide, the powered HDMI extender picks and every Audio, Power and Connectivity guide.





