A new monitor arrives, the cable in the box reaches the laptop, and the screen stays dark or flickers whenever the picture moves. The cause is often a mismatch in HDMI cable types: the cable cannot carry the resolution and refresh rate the screen asks for. HDMI cable types split by speed and by connector shape. By speed, the listings compared here divide into High Speed cables and Ultra High Speed cables, and by connector the common plug is Type A. Match the speed to the resolution and refresh rate the screen and source use, and the picture follows.
OfficeKitHQ earns a commission when you buy through links on this page, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Affiliate disclosure.
The quick answer
For a screen at 4K and 60 Hz, a High Speed cable rated at 18 Gbps carries the picture: the Amazon Basics listings state 4K at 60 Hz with bandwidth up to 18 Gbps. For 8K at 60 Hz or 4K at 120 Hz, step up to an Ultra High Speed cable rated at 48 Gbps: the Anker, Acer and Highwings listings state 48 Gbps with 8K at 60 Hz and 4K at 120 Hz. The same High Speed cable also covers 1080p, and the Vorothin listing states 1080p at 144 Hz on an 18 Gbps cable. Check the length next, since the listings here run from 6 ft to 50 ft.
HDMI cable types by speed
Speed is the main split, and the listings state it as bandwidth in Gbps. High Speed cables carry the older HDMI 2.0 standard, while Ultra High Speed cables carry HDMI 2.1. The table below compares the speed classes in the listings.
| Cable type | Bandwidth | Resolution and refresh rate | Example listing |
|---|---|---|---|
| High Speed (HDMI 2.0) | 18 Gbps | 4K at 60 Hz, 2160p | Amazon Basics, 6 ft |
| Ultra High Speed (HDMI 2.1) | 48 Gbps | 8K at 60 Hz, 4K at 120 Hz | Anker, 6 ft; Acer, 6.6 ft |
High Speed cables state 4K video at 60 Hz, 2160p and 48-bit color depth, with bandwidth up to 18 Gbps. Ultra High Speed cables state 8K at 60 Hz, 4K at 120 Hz and 4K at 240 Hz, with bandwidth up to 48 Gbps. The Silkland listing also states 10K, 5K at 120 Hz and 2K at 240 Hz on its Ultra High Speed cable. Older HDMI versions stay in use through backward compatibility: the Highwings and Silkland listings state backward compatibility from HDMI 2.1 to 1.1, and the Cheges listing states compatibility with HDMI 1.3, 1.4, 2.0, 2.0a and 2.1.
Step 1: Match the cable to the screen
Start with the screen and the source, not the cable. Read the resolution and refresh rate the screen and source use, then match the cable speed to those figures. For 4K at 60 Hz, a High Speed cable at 18 Gbps is enough: the Amazon Basics listings state 4K at 60 Hz, 2160p and 48-bit color depth. For 8K at 60 Hz or 4K at 120 Hz, an Ultra High Speed cable at 48 Gbps is the match: the Anker listing states 8K at 60 Hz with 4K at 120 Hz, and the Acer listing states 8K at 60 Hz with 4K at 240 Hz, 120 Hz and 144 Hz. For a monitor at 1080p and 144 Hz, the Vorothin listing states 1080p at 144 Hz on an 18 Gbps cable. For gaming, look for VRR in the listing: the Highwings and Acer listings state VRR support for smoother play. See the HDMI cable for 4K monitor picks for cables matched to a 4K screen.
Step 2: Pick the length
Measure the run from the source to the screen before ordering, and leave slack for the cable to bend without strain. The listings here run from 6 ft to 50 ft: the Amazon Basics and Anker cables are 6 ft, the Acer and Silkland cables are 6.6 ft, the Highwings cable is 15 ft, the Cheges cable (on Amazon) is 20 ft, and the looyotul and KIMTABO cables (on Amazon) are 50 ft. A short cable suits a laptop beside a monitor, while a long cable suits a console across the room or a wall-mounted screen. The Highwings 15 ft cable (on Amazon) is CL3 rated for in-wall runs. For a desk with the source under it, see the HDMI cable for home office picks.
Step 3: Check the connector and the extras
Check the plug shape and the extras in the listing. The common plug is Type A: the Amazon Basics cable is A Male to A Male. Smaller Type C and Type D plugs fit compact devices, while the listings here use the standard plug. For sound, look for ARC or eARC: the KIMTABO listing states ARC for sending audio from the TV to a soundbar or AV receiver, and the Acer listing states eARC with Dolby Vision and Dolby Atmos. For streaming, look for HDCP 2.2 and 2.3: the Highwings, Anker, Acer and Silkland listings state HDCP 2.2 and 2.3 compliance. For durability, look for a braided jacket and gold-plated connectors: the Acer and Silkland listings state braided jackets, the Cheges listing states a nylon-braided jacket with a bend lifespan of 10,000+, and the Anker listing states up to 1,000 bends. The listings also state 24K gold-plated connectors, and the Amazon Basics listings state Ethernet support. Warranty terms in the listings run from 18 months to lifetime: the Anker and Cheges listings state 18 months, the Vorothin listing states 24 months, and the Amazon Basics listing states lifetime.
Which cable for a console, and which for a desk
Consoles and desks ask for different cables. The Anker, Acer and Highwings listings name PS5 and Xbox, and state 48 Gbps with 8K at 60 Hz and 4K at 120 Hz for console play. A desk monitor at 4K and 60 Hz needs less: the Amazon Basics listings state 4K at 60 Hz with 18 Gbps, and the Vorothin listing states 1080p at 144 Hz for a monitor at lower resolution. For a desk with a laptop and a monitor, a 6 ft cable is the common length in the listings, while a console across the room may need 15 ft or 20 ft. For a setup with a monitor and an added screen, see the HDMI splitter for dual monitors picks.
FAQ
Do I need an HDMI 2.1 cable for a 4K TV?
For 4K at 60 Hz, no: a High Speed cable at 18 Gbps carries the picture, and the Amazon Basics listings state 4K at 60 Hz with bandwidth up to 18 Gbps. An HDMI 2.1 cable at 48 Gbps is for 8K at 60 Hz or 4K at 120 Hz, as the Anker and Acer listings state.
Are HDMI cables backward compatible?
Yes. The Highwings and Silkland listings state backward compatibility from HDMI 2.1 to 1.1, and the Cheges listing states compatibility with HDMI 1.3, 1.4, 2.0, 2.0a and 2.1, so an Ultra High Speed cable works with older HDMI devices.
What is eARC on an HDMI cable?
Enhanced Audio Return Channel sends audio from the TV back to a soundbar or AV receiver over the same cable. The KIMTABO listing states ARC for sending audio from the TV to a soundbar or AV receiver, and the Acer listing states eARC with Dolby Vision and Dolby Atmos.
How long can an HDMI cable be?
The listings here run from 6 ft to 50 ft. The looyotul and KIMTABO cables are 50 ft and state 4K at 60 Hz, the Highwings cable is 15 ft, and the Amazon Basics and Anker cables are 6 ft. Measure the run before ordering.
More for your workspace
See every connectivity guide, and the HDMI cable for 4K monitor, HDMI cable for home office and HDMI splitter for dual monitors picks.





