A sticky switch is ruining the home office keyboard, and the key that sticks is the one hit all day on calls. The good news is that how to remove keyboard switches without tool starts with a check, not a purchase: on a hot-swappable board, the switch lifts out once the keycap is off and the switch body is gripped and pulled straight up. The steps below show the no-tool way first, then the pullers that make the grip easier.
OfficeKitHQ earns a commission when you buy through links on this page, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Affiliate disclosure.
How to remove keyboard switches without tool
Start by pulling the keycap off the switch. The 2-in-1 tools in this guide combine a keycap puller and a switch puller, so the same tool handles each step, but the keycap comes off first either way. With the keycap off, grip the switch body at the sides and pull straight up with steady pressure. A puller grips the switch at several points at once, which is why the Keymatic listings describe a four-claw grip that runs around the switch without adjusting the clamp.
If the switch does not move, stop and check the board. The pullers in this guide are made for hot-swappable boards, and a soldered switch will not lift out this way. The Keymatic listings say their pullers work without soldering on hot-swappable mechanical or magnetic switches, so a board that needs solder work needs a different job.
Check the board first
Look for the words hot-swappable in the board listing or manual before pulling anything. The Keymatic listings state compatibility with most keyboards equipped with hot-swappable mechanical or magnetic switches, and the Granvela puller is made for hot-swappable switch removal. The GOLD DEER listing claims compatibility with all mechanical keyboards, which is wider than the hot-swappable limit the other listings state, so read the board listing rather than the puller listing when in doubt.
Cherry MX switches and common stabilizers are named in the pink Keymatic listing, so a board with those parts fits the pullers here. A board with soldered switches does not, and pulling on a soldered switch risks the board. If the board listing says nothing about hot-swapping, assume it is soldered and do not pull.
The pullers that help
The pullers below handle the grip step: each one clamps the switch body so it lifts out straight.
| # | Product | Office Score | Buy |
|---|---|---|---|
| 1 | Keymatic Pink 2-in-1 | 9.7/10 | Buy on Amazon |
| 2 | Keymatic Black 2-in-1 | 9.6/10 | Buy on Amazon |
| 3 | Granvela Steel Puller | 9.6/10 | Buy on Amazon |
| 4 | GOLD DEER 6-Piece Kit | 9.6/10 | Buy on Amazon |

Keymatic Pink 2-in-1
A 2-in-1 keycap and switch puller with a four-claw grip, a one-press eject and a 30-Day warranty, made for Cherry MX and hot-swappable switches.
Pros
- Four-claw grip fastens switches from all directions without adjusting the clamp
- One-press eject turns removal into one-touch ejection
- Works with Cherry MX switches, hot-swappable mechanical and magnetic switches plus common stabilizers
- 30-Day warranty stated
Cons
- 5.0 in length is the longest stated here
- No build material stated in the listing
- 30-Day warranty is the lowest term stated here
- No brush, bag or extra tool in the box
Detailed Review
Keymatic lists this as a 2-in-1 keycap and switch puller with a four-claw grip that fastens switches from all directions without adjusting the clamp, and a one-press eject that turns removal into one-touch ejection. It works with Cherry MX switches, hot-swappable mechanical and magnetic switches plus common stabilizers, and the maker claims it cuts 15-20 minutes off keyboard tuning time compared with regular pullers. The spec table gives a 5.0 x 1.0 x 1.0 in size in pink and a 30-Day warranty.
Who it's for: someone swapping switches on a hot-swappable board who wants the widest stated compatibility here. Who should skip it: anyone who wants a cleaning kit in the same box, or a longer warranty term.
Its Office Score of 9.7/10 comes from performance 32/35, build 21/25, value 20/25, safety not scored (non-powered gear) and warranty 1/5: 74 of 90 points, placed on our 9.2 to 9.8 scale.
Key Specifications
| Function | 2-in-1 keycap and switch puller |
|---|---|
| Grip | Four-claw, multi-degree surrounding |
| Size | 5.0 x 1.0 x 1.0 in |
| Color | Pink |
These specs mirror the retailer listing as of 13 November 2026; performance figures are stated by the brand.
Safety and Warranty
What this listing states. This product does not plug in or run on a battery, so safety is not part of its score. 30-Day warranty. It does not say everything a buyer needs, such as who pays return shipping, so warranty scores 1 of 5. See How We Pick.
Fit the desk first. Check the stated size against your desk depth and keyboard tray, and charge or pair as the manual describes. No keyboard, mouse or wrist rest prevents or treats injury.
This is general buying information, not professional advice. Follow each product manual and local rules, and see our Safety Disclaimer.

Keymatic Black 2-in-1
A 2-in-1 switch and keycap puller with a 4-claw grip that runs 360 degrees around the switch and a one-button pop-up eject.
Pros
- 4-claw grip runs 360 degrees around the switch
- One-button pop-up design for quick ejection
- Compatible with most hot-swappable mechanical or magnetic switches
- 30-Day warranty stated
Cons
- No material stated in the listing
- No brush or cleaning tool included
- 30-Day warranty is the lowest term stated here
- 1.0 x 1.0 x 4.3 in size with no weight stated
Detailed Review
Keymatic lists this as a 2-in-1 switch and keycap puller with a four-jaw pressing grip that runs 360 degrees around the switch and grips at multiple points without adjusting the clamp. The one-button pop-up design ejects the switch with one click, and the maker claims it saves 15-20 minutes when cleaning or customizing a keyboard compared with ordinary pullers. It is made for most keyboards with hot-swappable mechanical or magnetic switches, and the spec table gives a 1.0 x 1.0 x 4.3 in size in black with a 30-Day warranty.
Who it's for: someone who wants the same 2-in-1 grip and eject as the pink Keymatic in black. Who should skip it: anyone who wants a stated material, a cleaning brush or a longer warranty.
Its Office Score of 9.6/10 comes from performance 30/35, build 21/25, value 20/25, safety not scored (non-powered gear) and warranty 1/5: 72 of 90 points, placed on our 9.2 to 9.8 scale.
Key Specifications
| Function | 2-in-1 switch and keycap puller |
|---|---|
| Grip | Four-jaw pressing grip, 360 degrees |
| Size | 1.0 x 1.0 x 4.3 in |
| Color | Black |
These specs mirror the retailer listing as of 13 November 2026; performance figures are stated by the brand.
Safety and Warranty
What this listing states. This product does not plug in or run on a battery, so safety is not part of its score. 30-Day warranty. It does not say everything a buyer needs, such as who pays return shipping, so warranty scores 1 of 5. See How We Pick.
Fit the desk first. Check the stated size against your desk depth and keyboard tray, and charge or pair as the manual describes. No keyboard, mouse or wrist rest prevents or treats injury.
This is general buying information, not professional advice. Follow each product manual and local rules, and see our Safety Disclaimer.

Granvela Steel Puller
A stainless steel switch puller and keycap remover with a 1 Year Warranty, the longest warranty term stated here.
Pros
- 304 stainless steel build
- 1 Year Warranty, the longest term stated here
- Ergonomic metal tool for hot-swappable switch removal
- Solid metal build for DIY upgrades
Cons
- Only a single bullet in the listing, with no grip mechanism stated
- No compatibility list beyond hot-swappable switches in the title
- No weight stated
- No brush, bag or extra tool in the box
Detailed Review
Granvela lists this as a stainless steel switch puller and keycap remover made from 304 stainless steel, with an ergonomic metal shape for hot-swappable switch removal. The listing is thin: a single bullet covers the whole pitch, with no grip mechanism, no compatibility list beyond the title and no weight. The spec table gives a 4.34 x 1.77 x 0.79 in size in black and a 1 Year Warranty, the longest term stated here.
Who it's for: someone who wants a metal puller and the longest warranty here. Who should skip it: anyone who wants a stated grip mechanism or a kit with cleaning tools.
Its Office Score of 9.6/10 comes from performance 26/35, build 22/25, value 18/25, safety not scored (non-powered gear) and warranty 3/5: 69 of 90 points, placed on our 9.2 to 9.8 scale.
Key Specifications
| Material | 304 stainless steel |
|---|---|
| Function | Switch puller and keycap remover |
| Size | 4.34 x 1.77 x 0.79 in |
| Color | Black |
These specs mirror the retailer listing as of 13 November 2026; performance figures are stated by the brand.
Safety and Warranty
What this listing states. This product does not plug in or run on a battery, so safety is not part of its score. 1 Year Warranty. It does not say everything a buyer needs, such as who pays return shipping, so warranty scores 3 of 5. See How We Pick.
Fit the desk first. Check the stated size against your desk depth and keyboard tray, and charge or pair as the manual describes. No keyboard, mouse or wrist rest prevents or treats injury.
This is general buying information, not professional advice. Follow each product manual and local rules, and see our Safety Disclaimer.

GOLD DEER 6-Piece Kit
A 6-piece switch and keycap puller kit with brushes, a 4-jaw gripper and a velvet bag for cleaning and maintenance.
Pros
- 6-piece kit with a nylon brush, pullers and a velvet bag
- 4-jaw gripper for switch removal
- Velvet pouch keeps the tools together, 10 x 20 cm
- Nylon brush for keyboards, laptops, screens and printers
Cons
- No warranty term stated
- No dimensions or weight stated
- No specific build material stated
- Compatibility claim covers all mechanical keyboards, with no hot-swappable limit stated
Detailed Review
GOLD DEER lists a 6-piece kit: a small black nylon brush, a yellow IC puller, a black key puller, a small shaft puller, a 2-in-1 key puller and a 4-jaw pick-up tool, plus a black velvet bag sized 10 x 20 cm. The 2-in-1 key puller uses a wire design for key and shaft removal, and the nylon brush cleans keyboards, computers, laptops, screens, printers and electronic devices. The listing claims compatibility with all mechanical keyboards, a wider claim than the hot-swappable limit the Keymatic listings state, so check the board before pulling. No warranty term is stated, and no dimensions or weight are given.
Who it's for: someone who wants pullers plus cleaning tools in one bag. Who should skip it: anyone who wants a warranty term or a stated size.
Its Office Score of 9.6/10 comes from performance 28/35, build 19/25, value 21/25, safety not scored (non-powered gear) and warranty 0/5: 68 of 90 points, placed on our 9.2 to 9.8 scale.
Key Specifications
| Pieces | 6 |
|---|---|
| Includes | Nylon brush, IC puller, key puller, shaft puller, 2-in-1 key puller, 4-jaw pick-up tool, velvet bag |
| Bag | Black velvet, 10 x 20 cm |
| Grip | 4-jaw pick-up tool |
These specs mirror the retailer listing as of 13 November 2026; performance figures are stated by the brand.
Safety and Warranty
What this listing states. This product does not plug in or run on a battery, so safety is not part of its score. No warranty term, so warranty scores zero. See How We Pick.
Fit the desk first. Check the stated size against your desk depth and keyboard tray, and charge or pair as the manual describes. No keyboard, mouse or wrist rest prevents or treats injury.
This is general buying information, not professional advice. Follow each product manual and local rules, and see our Safety Disclaimer.
As an Amazon Associate I earn from qualifying purchases.
What to look for in a puller
- Grip: a four-claw or four-jaw grip holds the switch at several points, so the pull stays even.
- Eject: a one-press or one-button eject clears the switch from the tool without prying it out by hand.
- Compatibility: match the puller to hot-swappable mechanical or magnetic switches, and to Cherry MX switches and common stabilizers where the listing names them.
- Warranty: the Keymatic listings state a 30-Day warranty and the Granvela listing states a 1 Year Warranty, while the GOLD DEER kit (on Amazon) states none.
- Extras: a 6-piece kit adds a brush and a velvet bag for cleaning, while a single puller keeps the desk drawer simpler.
FAQ
Can I remove keyboard switches without a puller?
Yes, on a hot-swappable board. Lift the keycap, grip the switch body at the sides and pull straight up. A puller only makes the grip easier: the Keymatic four-claw grip holds the switch at several points at once.
Do all mechanical keyboards let you pull switches?
No. The pullers here are made for hot-swappable boards, and the Keymatic listings say they work without soldering on those boards. A soldered board needs solder work, not a puller.
What does a four-claw grip do?
It grips the switch at several points around the body. The Keymatic black listing says its four-jaw grip runs 360 degrees around the switch without adjusting the clamp, so the pull stays even.
How long does it take to swap a set of switches?
The Keymatic listings claim their pullers save 15-20 minutes when cleaning or customizing a keyboard, compared with ordinary pullers. The time depends on the board and the number of switches.
Do switch pullers come with a warranty?
The Keymatic listings state a 30-Day warranty, and the Granvela listing states a 1 Year Warranty. The GOLD DEER kit states no warranty term.
More for your workspace
See the best aluminum mechanical keyboards, the best keyboard cleaning sprays and the computer peripherals hub.









