Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›

Home office gear, compared spec by spec.

Amazon Black Friday Week deals
Monitor Mounts, Keyboards and Mice

How to Set Up Microphone Stand: Step-by-Step

How to set up a microphone stand: the floor tripod or desk boom arm, the height, the boom angle and the mic clip, with the sizes to check before you buy.

How to Set Up Microphone Stand: Step-by-Step

How to set up microphone stand starts with the base on the floor or the clamp on the desk, then the height, then the boom angle, so the mic sits where the voice lands. A tripod holds the mic in the room, a boom arm holds it over the desk, and the clip holds the mic itself. This guide shows how to place each part, how to set the height and the boom, and which stand in this group fits the mic and the room.

OfficeKitHQ earns a commission when you buy through links on this page, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Affiliate disclosure.

Set the base first

Put the tripod legs on a flat floor and spread them wide, or fix the desk clamp to the edge of the desktop and lock the knob so the arm does not move. The FIFINE clamp (on Amazon) fits desktops up to 2 in thick, and the Frgyee clamps grip desktops up to 4.2 in thick. A base that wobbles makes the mic wobble, so check the stand before the mic goes on.

Set the height and the boom

Raise the stand until the mic sits at mouth height while standing or sitting, then set the boom so the mic points at the mouth. The InnoGear stand adjusts from 28.1 in to 89.8 in, with a boom from 16 in to 30 in that rotates 360 degrees sideways and up to 180 degrees up and down. The CAHAYA stand (on Amazon) adjusts from 25.2 in to 62.2 in, with a boom from 16.9 in to 30.1 in that rotates 360 degrees. The Frgyee riser stands (on Amazon) 31.5 in high and crosses over the monitor, so the mic hangs above the desk without blocking the screen.

Clip the mic and fit the adapter

Fit the mic clip to the boom, then fit the mic to the clip, and use the adapter when the threads do not match. The InnoGear and CAHAYA stands come with 2 mic clips and a 3/8 in to 5/8 in screw adapter, and the Frgyee arm comes with 3/8 in to 5/8 in and 1/4 in to 3/8 in adapters. The FIFINE arm comes with a 5/8 in to 3/8 in metal adapter. Match the adapter to the mic thread before the mic goes on.

How to set up microphone stand: the gear

The tripod or clamp holds the stand and the boom holds the mic in place, so match the stand to the height and the mic it states.

InnoGear TS186D

InnoGear TS186D

InnoGear9.7/10 Office Score
i
The Office Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 2-set tripod boom mic stand that adjusts from 28.1 in to 89.8 in, with a boom from 16 in to 30 in and a carrying bag.

Pros

  • Height adjusts from 28.1 in to 89.8 in
  • Boom adjusts from 16 in to 30 in and rotates 360 degrees sideways and up to 180 degrees up and down
  • Two mic clips and a 3/8 in to 5/8 in adapter are included
  • Carrying bag included; the stand packs into a 19.5 in by 8.3 in bag

Cons

  • No desk clamp is included, so it cannot mount to a desk edge
  • Stand packs into the bag only when taken apart
  • Mic clips fit most microphones, not every model
Detailed Review

InnoGear lists a 2-set tripod boom mic stand with a height that adjusts from 28.1 in to 89.8 in and a boom arm that adjusts from 16 in to 30 in, rotates 360 degrees sideways and up to 180 degrees up and down. The stand uses thickened steel poles, weighs 4.0 lb in the bullets, and comes with 2 mic clips, a 3/8 in to 5/8 in screw adapter and a carrying bag that holds the stand at 19.5 in by 8.3 in when taken apart. The spec table lists a different item weight than the 4.0 lb in the bullets, so the bullets are the figure to trust. The listing states a 12 months warranty.

Who it's for: someone who wants a floor stand for singing or podcasting, with a wide height range and a bag for transport. Who should skip it: anyone who needs a desk-mounted arm, or one stand rather than a 2-set.

Its Office Score of 9.7/10 comes from performance 32/35, build 21/25, value 22/25, safety 5/10 and warranty 3/5: 83 of 100 points, placed on our 9.2 to 9.8 scale.

Key Specifications
Height range28.1 to 89.8 in
Boom arm16 to 30 in
Stand weight4.0 lb
Warranty12 months

These specs mirror the retailer listing as of 13 November 2026; performance figures are stated by the brand.

Safety and Warranty

What this listing states. Thickened steel poles and a tripod base are stated, so safety scores 5 of 10. 12 months. It does not say everything a buyer needs, such as who pays return shipping, so warranty scores 3 of 5. See How We Pick.

Protect your hearing. Keep volume moderate during long calls, take breaks, and treat noise cancelling and battery figures as the maker's claims.

This is general buying information, not professional advice. Follow each product manual and local rules, and see our Safety Disclaimer.

CAHAYA CY0239

CAHAYA CY0239

CAHAYA9.6/10 Office Score
i
The Office Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A floor tripod boom mic stand that adjusts from 25.2 in to 62.2 in, with a boom from 16.9 in to 30.1 in and a carrying bag.

Pros

  • Height adjusts from 25.2 in to 62.2 in
  • Boom extends from 16.9 in to 30.1 in and rotates 360 degrees
  • Non-slip foot pads and hollow bottom supports keep the stand in place
  • Assembles or takes apart in 2 minutes, with a carrying bag and 2 mic clips

Cons

  • Height tops out at 62.2 in, lower than the InnoGear 89.8 in
  • No vertical boom angle is stated, only 360 degrees of rotation
  • No desk clamp is included, so it cannot mount to a desk edge
  • Mic clips fit most microphones, not every model
Detailed Review

CAHAYA lists a floor tripod boom mic stand with a height that adjusts from 25.2 in to 62.2 in and a boom arm that extends from 16.9 in to 30.1 in and rotates 360 degrees. The legs extend wider than most, hollow bottom supports help spread the weight, and non-slip foot pads keep the stand in place. The stand comes with a carrying bag and 2 mic clips, a 3/8 in to 5/8 in adapter, and it assembles or takes apart in 2 minutes. The listing states an item weight of 3.5 lb and a 2 years warranty.

Who it's for: someone who wants a floor stand for stage, speech or podcast use, with a bag and a quick setup. Who should skip it: anyone who needs a desk-mounted arm, or a height above 62.2 in.

Its Office Score of 9.6/10 comes from performance 29/35, build 21/25, value 20/25, safety 6/10 and warranty 3/5: 79 of 100 points, placed on our 9.2 to 9.8 scale.

Key Specifications
Height range25.2 to 62.2 in
Boom arm16.9 to 30.1 in
Item weight3.5 lb
Warranty2 years

These specs mirror the retailer listing as of 13 November 2026; performance figures are stated by the brand.

Safety and Warranty

What this listing states. Non-slip foot pads and hollow bottom supports are stated, so safety scores 6 of 10. 2 years. It does not say everything a buyer needs, such as who pays return shipping, so warranty scores 3 of 5. See How We Pick.

Protect your hearing. Keep volume moderate during long calls, take breaks, and treat noise cancelling and battery figures as the maker's claims.

This is general buying information, not professional advice. Follow each product manual and local rules, and see our Safety Disclaimer.

Frgyee Mic Boom Arm

Frgyee Mic Boom Arm

Frgyee9.6/10 Office Score
i
The Office Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

An overhead desk mic boom arm with a 31.5 in riser that crosses over the monitor, with clamps for desktops up to 4.2 in thick.

Pros

  • 31.5 in riser crosses over the monitor without blocking the screen
  • Clamps grip desktops up to 4.2 in thick
  • Comes with 3/8 in to 5/8 in and 1/4 in to 3/8 in adapters
  • Tool-less adjustment with a quick-moving clip on the joints

Cons

  • No boom arm length is stated
  • No height range is stated, only the 31.5 in riser
  • Desk mount only, with no tripod base
  • Clamp fits desktops up to 4.2 in thick, so thicker desks do not fit
Detailed Review

Frgyee lists an overhead desk mic boom arm with a 31.5 in riser that crosses over the monitor, so the mic hangs above the desk without blocking the screen. The riser and stand use thickened, heavy duty steel, the upgraded clamps grip desktops up to 4.2 in thick, and the joints use a quick-moving clip for tool-less adjustment. The arm comes with 3/8 in to 5/8 in and 1/4 in to 3/8 in adapters and fits mics like the Shure SM7B and Blue Yeti. The listing states an item weight of 3.85 lb and a 2 year warranty, but no boom arm length or height range is stated.

Who it's for: someone who wants the mic overhead on a desk, over the monitor, with a riser and tool-less adjustment. Who should skip it: anyone who needs a floor stand, or a stated boom length.

Its Office Score of 9.6/10 comes from performance 29/35, build 21/25, value 20/25, safety 5/10 and warranty 3/5: 78 of 100 points, placed on our 9.2 to 9.8 scale.

Key Specifications
Riser height31.5 in
Clamp fitUp to 4.2 in thick
Item weight3.85 lb
Warranty2 year

These specs mirror the retailer listing as of 13 November 2026; performance figures are stated by the brand.

Safety and Warranty

What this listing states. Thickened heavy duty steel riser and upgraded clamps are stated, so safety scores 5 of 10. 2 year. It does not say everything a buyer needs, such as who pays return shipping, so warranty scores 3 of 5. See How We Pick.

Protect your hearing. Keep volume moderate during long calls, take breaks, and treat noise cancelling and battery figures as the maker's claims.

This is general buying information, not professional advice. Follow each product manual and local rules, and see our Safety Disclaimer.

FIFINE CS1

FIFINE CS1

FIFINE9.6/10 Office Score
i
The Office Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A scissor mic boom arm with a metal desk clamp for desktops up to 2 in thick, with 180 degrees of rotation.

Pros

  • Metal desk clamp with an anti-scratch pad and a mouth up to 2 in wide
  • Boom arm rotates 180 degrees up and down
  • Strong elastic springs keep the arm steady when the desk is hit
  • Folds to save desktop space and fits in a bag for travel

Cons

  • No boom arm length is stated
  • No height range in inches is stated
  • Clamp fits desktops up to 2 in thick, so thicker desks do not fit
  • Microphone is not included
Detailed Review

FIFINE lists a scissor mic boom arm with a metal desk clamp that has an anti-scratch pad and a mouth up to 2 in wide, for desktops up to 2 in thick. The arm rotates 180 degrees up and down, strong elastic springs keep it steady, and it folds to save desktop space. The arm comes with a 5/8 in to 3/8 in metal adapter and fits mics like the Fifine K669B and K670, but the microphone is not included. The listing states a 1 year warranty, but no boom arm length or height range in inches is stated.

Who it's for: someone who wants a clamp-on boom arm for gaming, streaming or podcasting on a desk up to 2 in thick. Who should skip it: anyone who needs a floor stand, or a stated boom length.

Its Office Score of 9.6/10 comes from performance 28/35, build 20/25, value 20/25, safety 5/10 and warranty 3/5: 76 of 100 points, placed on our 9.2 to 9.8 scale.

Key Specifications
Clamp fitUp to 2 in thick
Rotation180 degrees
Adapter5/8 in to 3/8 in
Warranty1 year warranty

These specs mirror the retailer listing as of 13 November 2026; performance figures are stated by the brand.

Safety and Warranty

What this listing states. Metal desk clamp with anti-scratch pad and a fixed knob are stated, so safety scores 5 of 10. 1 year warranty. It does not say everything a buyer needs, such as who pays return shipping, so warranty scores 3 of 5. See How We Pick.

Protect your hearing. Keep volume moderate during long calls, take breaks, and treat noise cancelling and battery figures as the maker's claims.

This is general buying information, not professional advice. Follow each product manual and local rules, and see our Safety Disclaimer.

As an Amazon Associate I earn from qualifying purchases.

FAQ

How high should a microphone stand go?

The InnoGear stand adjusts from 28.1 in to 89.8 in, and the CAHAYA stand adjusts from 25.2 in to 62.2 in. Set the height so the mic sits at mouth height while standing or sitting.

How long is the boom arm?

The InnoGear boom adjusts from 16 in to 30 in, and the CAHAYA boom extends from 16.9 in to 30.1 in. Set the length so the mic reaches the mouth without pulling the stand over.

What desk thickness fits the clamp?

The FIFINE clamp fits desktops up to 2 in thick, and the Frgyee clamps grip desktops up to 4.2 in thick. Measure the desktop edge before you order.

What adapter fits the mic?

The InnoGear and CAHAYA stands come with a 3/8 in to 5/8 in adapter, and the Frgyee arm adds a 1/4 in to 3/8 in adapter. Match the adapter to the mic thread before the mic goes on.

InnoGear TS186D
Still deciding? Our top pickInnoGear TS186D
Check price on Amazon

More for your workspace

See the computer peripherals guides, the best boom microphone stands, the best desk clamps for microphones and the best USB microphones for podcasters.