The best desk clamp for microphone work is the small piece of hardware that decides whether a boom arm stays put through a long recording or slowly slides off the desk edge. A mic on a boom arm hangs from the clamp, and the clamp is what holds the arm steady while you talk. We compared the desk clamps for microphones in this group by mounting hole, desk thickness range, pads, material and warranty, using only what each listing publishes.
OfficeKitHQ earns a commission when you buy through links on this page, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Affiliate disclosure.
Quick picks
Best Overall Angksorm KB47 Mic Clamp: 5/8-27 and 3/8-16 threads, 2 adapters, fits desks up to 2.36 in Check price on Amazon
Best Two-Hole CCITOW 12mm Desk Clamp: Dual 12mm holes, fits desks up to 2.56 in, 1-year warranty stated Check price on Amazon
Best 2-in-1 LILANZo Mic Table Clamp: 2 tube holes at 0.47 in, fits desks up to 2.56 in, rubber pads Check price on Amazon
Best Heavy-Duty SUNMON Heavy-Duty Clamp: Iron clamp with silicone pad, headset hook and 360-degree rotation Check price on Amazon
Best Value NEEWER Metal Table Clamp: Metal clamp with foam padding, fits desks up to 2.2 in Check price on Amazon
Our desk picks
| # | Product | Office Score | Buy |
|---|---|---|---|
| 1 | CCITOW 12mm Desk Clamp | 9.7/10 | Buy on Amazon |
| 2 | LILANZo Mic Table Clamp | 9.6/10 | Buy on Amazon |
| 3 | Angksorm KB47 Mic Clamp | 9.6/10 | Buy on Amazon |
| 4 | SUNMON Heavy-Duty Clamp | 9.5/10 | Buy on Amazon |
| 5 | NEEWER Metal Table Clamp | 9.5/10 | Buy on Amazon |

CCITOW 12mm Desk Clamp
A 2-hole mic clamp with dual 12 mm mounting holes, full-coverage rubber pads and a 36 by 45 mm contact area, fitting desks up to 2.56 in.
Pros
- Dual 12 mm (0.47 in) mounting holes with adjustable screws
- Fits desks up to 2.56 in thick, including wood, glass and metal
- Full-coverage rubber pads on both contact surfaces
- 1-year manufacturer warranty is stated
Cons
- No material is stated beyond high-strength and reinforced
- No stated fit for posts above 0.47 in
- No item weight is stated
- The 2 holes share the 12 mm size, so a post above 0.47 in will not fit
Detailed Review
CCITOW lists a desk clamp for microphone with dual 12 mm (0.47 in) mounting holes with adjustable screws, for vertical and horizontal installation on surfaces up to 2.56 in thick. It states full-coverage rubber pads on both contact surfaces and a 36 by 45 mm contact area, and works with microphone boom arms, phone and tablet holders, overhead camera arms, LED lamps, ring lights and webcams. A 1-year manufacturer warranty is stated.
Who it's for: someone mounting a mic boom arm or a 0.47 in post device on a desk up to 2.56 in thick who wants rubber pads on both contact surfaces. Who should skip it: anyone whose post needs a hole above 0.47 in.
Its Office Score of 9.7/10 comes from performance 30/35, build 21/25, value 21/25, safety 8/10 and warranty 4/5: 84 of 100 points, placed on our 9.2 to 9.8 scale.
Key Specifications
| Mounting holes | Dual 12 mm (0.47 in) |
|---|---|
| Desk thickness | Up to 2.56 in (6.5 cm) |
| Contact area | 36 by 45 mm |
| Warranty | 1 year |
Figures as published on the retailer listing, collected 12 November 2026. Performance figures are manufacturer rated.
Safety and Warranty
What this listing states. Full-coverage rubber pads on both contact surfaces, so safety scores 8 of 10. 1-year manufacturer warranty. It does not say everything a buyer needs, such as who pays return shipping, so warranty scores 4 of 5. See How We Pick.
Match the mount. Check your screen's VESA pattern, size and weight against the stated range, and check that your desk thickness and edge suit a clamp or grommet mount before you drill or clamp.
This is general buying information, not professional advice. Follow each product manual and local rules, and see our Safety Disclaimer.

LILANZo Mic Table Clamp
A 2-in-1 mic clamp with 2 tube holes at 0.47 in, double non-slip rubber pads and 360-degree rotation, fitting desks up to 2.56 in.
Pros
- 2 tube holes at 0.47 in (1.19 cm) take mic arms and camera arms
- Fits desks up to 2.56 in (6.5 cm) thick
- Double non-slip rubber pads on both contact points
- 1-year warranty is stated
Cons
- Reinforced solid plastic base, where the others here are metal
- No item weight is stated
- Hole diameter over 0.47 in cannot be installed
- Orange is the only color stated
Detailed Review
LILANZo lists a table clamp mount for microphone stand with 2 tube holes at 0.47 in (1.19 cm) and an adjustable screw, for vertical or horizontal boards up to 2.56 in (6.5 cm) thick. It states a reinforced solid plastic base, double non-slip rubber pads on both contact points, and 360-degree free rotation. A 1-year warranty is stated.
Who it's for: someone mounting a mic boom arm or overhead camera arm on a desk up to 2.56 in thick who wants 2 holes and a warranty. Who should skip it: anyone who wants a metal base.
Its Office Score of 9.6/10 comes from performance 29/35, build 18/25, value 21/25, safety 8/10 and warranty 4/5: 80 of 100 points, placed on our 9.2 to 9.8 scale.
Key Specifications
| Tube holes | 2 holes at 0.47 in (1.19 cm) |
|---|---|
| Desk thickness | Up to 2.56 in (6.5 cm) |
| Material | Reinforced solid plastic |
| Warranty | 1 year |
Figures as published on the retailer listing, collected 12 November 2026. Performance figures are manufacturer rated.
Safety and Warranty
What this listing states. Double non-slip rubber pads on both contact points, so safety scores 8 of 10. 1-year warranty. It does not say everything a buyer needs, such as who pays return shipping, so warranty scores 4 of 5. See How We Pick.
Match the mount. Check your screen's VESA pattern, size and weight against the stated range, and check that your desk thickness and edge suit a clamp or grommet mount before you drill or clamp.
This is general buying information, not professional advice. Follow each product manual and local rules, and see our Safety Disclaimer.

Angksorm KB47 Mic Clamp
A heavy-duty metal mic clamp with 5/8-27 male and 3/8-16 female threads, 2 thread adapters and double rubber pads, fitting desks up to 2.36 in.
Pros
- 5/8-27 male and 3/8-16 female threads, plus 5/8 to 1/4 and 5/8 to 3/8 adapters
- Fits desks up to 2.36 in thick, or 60 mm
- Double rubber pads and anti-slip shock pads protect the desk
- 1-year manufacturer warranty is stated
Cons
- Needs 1.2 in of clearance from the desk edge to a metal frame
- 0.6 lb item weight is stated with no load figure
- No stated fit for desks above 2.36 in
- Thread adapters cover 1/4 and 3/8 in, but no other sizes are stated
Detailed Review
Angksorm lists the KB47 as a heavy-duty metal table microphone clamp mount with U.S. standard 5/8-27 male and 3/8-16 female threads, plus 5/8 to 1/4 and 5/8 to 3/8 adapters. It fits desks up to 60 mm (2.36 in) thick, the brace and screw-in mount are both padded, and the rubber anti-slip safety shock pads reduce vibration. A 1-year manufacturer warranty is stated. A desk with a metal frame underneath needs at least 1.2 in of clearance from the desk edge to the frame.
Who it's for: someone mounting a mic boom arm or gooseneck on a desk up to 2.36 in thick who wants standard threads and adapters in the box. Who should skip it: anyone whose desk and frame together exceed 60 mm.
Its Office Score of 9.6/10 comes from performance 32/35, build 22/25, value 21/25, safety 8/10 and warranty 0/5: 83 of 100 points, placed on our 9.2 to 9.8 scale.
Key Specifications
| Mounting thread | 5/8-27 male, 3/8-16 female |
|---|---|
| Desk thickness | Up to 2.36 in (60 mm) |
| Item weight | 0.6 lb |
| Warranty | 1 year |
Figures as published on the retailer listing, collected 12 November 2026. Performance figures are manufacturer rated.
Safety and Warranty
What this listing states. Double rubber pads and anti-slip shock pads protect the desk, so safety scores 8 of 10. No warranty term, so warranty scores zero. See How We Pick.
Match the mount. Check your screen's VESA pattern, size and weight against the stated range, and check that your desk thickness and edge suit a clamp or grommet mount before you drill or clamp.
This is general buying information, not professional advice. Follow each product manual and local rules, and see our Safety Disclaimer.

SUNMON Heavy-Duty Clamp
A heavy-duty iron clamp with a silicone pad, an integrated headset hook and a 360-degree screw-in design, for 11 to 13 mm boom arms.
Pros
- Iron clamp with a screw-in design that rotates 360 degrees
- Silicone pad at the contact point protects the table
- Headset hook is integrated into the desk clamp
- Suits 11 to 13 mm diameter boom arms
Cons
- No warranty term is stated
- 4 times larger contact area is the maker's claim, with no measurement stated
- No hole size is stated, only the 11 to 13 mm arm range
Detailed Review
SUNMON lists a heavy-duty metal table mount clamp made of iron, with a screw-in design that rotates 360 degrees and a silicone pad at the contact point. The title states a fit for desks up to 2.48 in (6.2 cm) thick, while the bullets state up to 2.24 in (57 mm); the bullets also state a headset hook and a fit for 11 to 13 mm diameter boom arms. No warranty term is stated.
Who it's for: someone mounting a mic boom arm of 11 to 13 mm on a desk who wants an iron clamp with a headset hook. Who should skip it: anyone who needs a stated warranty term.
Its Office Score of 9.5/10 comes from performance 28/35, build 20/25, value 19/25, safety 7/10 and warranty 0/5: 74 of 100 points, placed on our 9.2 to 9.8 scale.
Key Specifications
| Desk thickness | 2.48 in (title), 2.24 in (bullets) |
|---|---|
| Material | Iron |
| Arm diameter | 11 to 13 mm |
| Pad | Silicone |
Figures as published on the retailer listing, collected 12 November 2026. Performance figures are manufacturer rated.
Safety and Warranty
What this listing states. Silicone pad protection mat at the contact point, so safety scores 7 of 10. No warranty term, so warranty scores zero. See How We Pick.
Match the mount. Check your screen's VESA pattern, size and weight against the stated range, and check that your desk thickness and edge suit a clamp or grommet mount before you drill or clamp.
This is general buying information, not professional advice. Follow each product manual and local rules, and see our Safety Disclaimer.

NEEWER Metal Table Clamp
A metal table mounting clamp with foam padding and an adjustable positioning screw, for mic scissor arms on desks up to 2.2 in.
Pros
- Metal clip base with an adjustable positioning screw
- Soft foam padding at the contact point protects the desktop
- Fits desktops up to 2.2 in (5.6 cm) thick per the bullets
- 0.35 lb item weight keeps the clamp light on the desk edge
Cons
- No warranty term is stated
- Microphone boom arm, cellphone and iPad are not included
- No hole size is stated
Detailed Review
NEEWER lists a metal table mounting clamp for microphone suspension boom arm stand with an adjustable positioning screw and soft foam padding at the contact point. The title states a fit for desktops up to 1.9 in (5 cm) thick, while the bullets state up to 2.2 in (5.6 cm). The clamp suits stores, families, stages, studios and broadcasting, and the microphone boom arm, cellphone and iPad are not included. No warranty term is stated.
Who it's for: someone mounting a mic scissor arm on a desk who wants a metal clamp with foam padding. Who should skip it: anyone who needs a stated warranty term.
Its Office Score of 9.5/10 comes from performance 27/35, build 20/25, value 19/25, safety 7/10 and warranty 0/5: 73 of 100 points, placed on our 9.2 to 9.8 scale.
Key Specifications
| Desk thickness | 1.9 in (title), 2.2 in (bullets) |
|---|---|
| Material | Metal |
| Padding | Soft foam |
| Item weight | 0.35 lb |
Figures as published on the retailer listing, collected 12 November 2026. Performance figures are manufacturer rated.
Safety and Warranty
What this listing states. Soft foam padding at the contact point protects the desktop, so safety scores 7 of 10. No warranty term, so warranty scores zero. See How We Pick.
Match the mount. Check your screen's VESA pattern, size and weight against the stated range, and check that your desk thickness and edge suit a clamp or grommet mount before you drill or clamp.
This is general buying information, not professional advice. Follow each product manual and local rules, and see our Safety Disclaimer.
As an Amazon Associate I earn from qualifying purchases.
More picks to compare
SUNMON Mic Boom ClampAluminum alloy clamp with foam padding, fits desks up to 1.8 inCheck on Amazon
CCITOW Desk Clamp for MicMetal clamp with 0.47 in hole, fits desks up to 2.17 inCheck on Amazon
RTNLIT Desk Clamp for LampAluminum clamp with 1/2 and 5/8 in holes, fits desks up to 3.3 inCheck on Amazon
HLGHLG Table Clamp for MicPlastic clamp with 0.47 in holes, fits desks up to 2.56 inCheck on Amazon
Lifexciting Mic Stand ClampAluminum alloy clamp with 0.47 in hole, fits desks up to 2.6 inCheck on Amazon
Specs compared
| Clamp | Office Score | Mounting hole | Desk thickness | Pads | Material | Warranty | Amazon |
|---|---|---|---|---|---|---|---|
| Angksorm KB47 Mic Clamp | 9.6/10 | 5/8-27, 3/8-16 | Up to 2.36 in | Double rubber | Metal | 1 year | View on Amazon |
| CCITOW 12mm Desk Clamp | 9.7/10 | Dual 12 mm | Up to 2.56 in | Full-coverage rubber | Not stated | 1 year | View on Amazon |
| LILANZo Mic Table Clamp | 9.6/10 | Dual 0.47 in | Up to 2.56 in | Double non-slip rubber | Plastic | 1 year | View on Amazon |
| SUNMON Heavy-Duty Clamp | 9.5/10 | 11 to 13 mm arms | 2.24 in (bullets) | Silicone pad | Iron | Not stated | View on Amazon |
| NEEWER Metal Table Clamp | 9.5/10 | Not stated | 2.2 in (bullets) | Foam padding | Metal | Not stated | View on Amazon |
All numbers are the manufacturer’s stated specs, not measured in an office, pulled on 12 November 2026. 3 of the 5 state a warranty term; all 5 state pads that protect the desk.
How to choose the best desk clamp for microphone
Match the thread to your mic arm
Match the mounting hole before anything else. The Angksorm lists U.S. standard 5/8-27 male and 3/8-16 female threads, plus a 5/8 to 1/4 adapter and a 5/8 to 3/8 adapter. The CCITOW lists dual 12 mm (0.47 in) mounting holes, the LILANZo 2 tube holes at 0.47 in (1.19 cm), and the SUNMON suits 11 to 13 mm diameter boom arms. The NEEWER states no hole size. If your arm post is wider than the hole, the clamp cannot take it. A best boom arm microphone for home studio guide shows what hangs from these holes.
Measure the desk edge before you buy
Desk thickness decides the fit. The LILANZo and CCITOW fit desks up to 2.56 in thick, the Angksorm up to 60 mm (2.36 in), and the SUNMON title states 2.48 in against 2.24 in in the bullets, while the NEEWER title states 1.9 in against 2.2 in. The Angksorm also warns that a desk with a metal frame underneath needs at least 1.2 in of clearance to the frame. Measure the edge where the clamp will sit, and buy the clamp whose range covers that number.
Pads decide whether the desk stays clean
The pad stands between metal and desktop. The Angksorm lists double rubber pads and anti-slip shock pads, the CCITOW full-coverage rubber pads on both contact surfaces, the LILANZo double non-slip rubber pads, the SUNMON a silicone pad, and the NEEWER soft foam padding. Pick a clamp that names its pad in the listing.
Read the warranty line, not the headline
3 of the 5 listings state a warranty term. The Angksorm, LILANZo and CCITOW state a 1-year warranty term. The SUNMON and NEEWER state no warranty term at all. The pads and the screw are the pieces that wear, so a term in writing is worth more than a vague promise.
Clamp, hole and desk fit at a glance
| Clamp | Mounting hole | Desk thickness | Warranty |
|---|---|---|---|
| Angksorm KB47 Mic Clamp | 5/8-27, 3/8-16 | Up to 2.36 in | 1 year |
| CCITOW 12mm Desk Clamp | Dual 12 mm | Up to 2.56 in | 1 year |
| LILANZo Mic Table Clamp | Dual 0.47 in | Up to 2.56 in | 1 year |
| SUNMON Heavy-Duty Clamp | 11 to 13 mm arms | 2.24 in (bullets) | Not stated |
| NEEWER Metal Table Clamp | Not stated | 2.2 in (bullets) | Not stated |
Figures as stated in each listing.
Setup Notes
- Measure the desk edge where the clamp will sit and compare it with the stated fit: 2.36 in on the Angksorm, 2.56 in on the LILANZo and CCITOW.
- Check the clearance under the desk: the Angksorm needs 1.2 in from the desk edge to a metal frame.
- Match the arm post to the hole: 5/8-27 and 3/8-16 threads on the Angksorm, 12 mm holes on the CCITOW, 0.47 in holes on the LILANZo.
- Check the pad before you tighten: double rubber on the Angksorm and LILANZo, full-coverage rubber on the CCITOW, silicone on the SUNMON, foam on the NEEWER.
- Route the mic cable clear of the clamp screw so the cord never pulls the arm off center.
FAQ
What thread size fits a mic boom arm?
The Angksorm lists 5/8-27 male and 3/8-16 female threads, plus 5/8 to 1/4 and 5/8 to 3/8 adapters. The CCITOW and LILANZo take 0.47 in (12 mm) posts, the SUNMON suits 11 to 13 mm arms, and the NEEWER states no hole size.
How thick a desk can these clamps grip?
The LILANZo and CCITOW fit desks up to 2.56 in thick, the Angksorm up to 2.36 in. The SUNMON title states 2.48 in against 2.24 in in the bullets, the NEEWER 1.9 in against 2.2 in.
Do mic clamps damage the desktop?
The Angksorm lists double rubber pads, the CCITOW full-coverage rubber pads, the LILANZo double non-slip rubber pads, the SUNMON a silicone pad, and the NEEWER soft foam padding.
Which clamps come with a warranty?
The Angksorm, LILANZo and CCITOW state a 1-year term; the SUNMON and NEEWER state no warranty term.
Can I mount a camera or lamp on a mic clamp?
The Angksorm takes cameras, drafting table lights, magnifiers, lamps, tablets, monitors, projectors, webcams, ring lights and phone mounts with its adapters. The CCITOW takes phone and tablet holders, overhead camera arms, LED lamps, ring lights and webcams; the LILANZo takes overhead camera arms, tablet arms and LED desk lamps.
Score breakdown
The Office Score weighs performance (mounting hole, desk thickness range and mic arm compatibility), build (material and pads), value for the stated specs, safety and warranty. For a mic clamp, safety means pads that protect the desktop and a grip that holds the arm steady without vibration; all 5 state pads. 3 of the 5 state a warranty term: the Angksorm, LILANZo and CCITOW at 1 year each. How we pick explains the weights.
| Product | Office Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| CCITOW 12mm Desk Clamp | 9.7 | 30 | 21 | 21 | 8 | 4 |
| LILANZo Mic Table Clamp | 9.6 | 29 | 18 | 21 | 8 | 4 |
| Angksorm KB47 Mic Clamp | 9.6 | 32 | 22 | 21 | 8 | 0 |
| SUNMON Heavy-Duty Clamp | 9.5 | 28 | 20 | 19 | 7 | 0 |
| NEEWER Metal Table Clamp | 9.5 | 27 | 20 | 19 | 7 | 0 |
We fit point totals onto a 9.2 low and 9.8 high in a straight line. One item can outscore another only by earning more points.
More for your workspace
See every monitor arm and stand guide and all computer peripheral guides. Also see our best boom arm microphone for home studio. Also see our best microphone mount with pop filter. Also see our best heavy duty microphone stand with pop filter. Also see our best usb microphone for home office.
More picks: desk lamps and light bars, best swing arm desk lamp, best monitor arm for home studio.





