The best desk clamp with hole is the small piece of hardware that decides whether a mic arm stays put through a long call or slowly slides off the desk edge. A boom arm, a swing arm lamp and a magnifying light all hang from the same kind of clamp, and the hole in the top is what takes the arm. We compared the desk clamps with holes in this group by hole size, desk thickness range, pads, pack size and warranty, using only what each listing publishes.
OfficeKitHQ earns a commission when you buy through links on this page, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Affiliate disclosure.
Quick picks
Best Overall RTNLIT Desk Lamp Clamp: 4 holes at 0.49 in, fits desks up to 2-1/2 in, 180-day warranty stated Check price on Amazon
Best 2-Pack Jhanw 3 in C-Clamp: 2-pack steel clamp, 4 holes in back, clamping range 0.39 to 3.5 in Check price on Amazon
Best for Lamps HLGHLG C-Clamp Lamp Holder: Fits surfaces up to 2.24 in, hole under 0.47 in, soft rubber pad Check price on Amazon
Best for Mic Arms SUNMON Mic Boom Clamp: Aluminum alloy clamp for mic boom arms, fits desks up to 1.8 in Check price on Amazon
Best Four-Pack AYWGZL Desk C-Clamp 4-Pack: 4-pack with 0.49 in hole, fits desks from 0 to 1.77 in Check price on Amazon
Our desk picks
| # | Product | Office Score | Buy |
|---|---|---|---|
| 1 | RTNLIT Desk Lamp Clamp | 9.7/10 | Buy on Amazon |
| 2 | Jhanw 3 in C-Clamp | 9.6/10 | Buy on Amazon |
| 3 | HLGHLG C-Clamp Lamp Holder | 9.6/10 | Buy on Amazon |
| 4 | SUNMON Mic Boom Clamp | 9.5/10 | Buy on Amazon |
| 5 | AYWGZL Desk C-Clamp 4-Pack | 9.4/10 | Buy on Amazon |

RTNLIT Desk Lamp Clamp
A 4-hole aluminum alloy clamp with a 0.49 in thread hole that fits desks up to 2-1/2 in, with double anti-slip pads and the only stated warranty here.
Pros
- 4 bracket thread holes at 0.49 in take mic arms, swing arm lamps and tablet arms
- Fits desks up to 2-1/2 in thick
- Double anti-slip pads on both contact points protect the desk
- 180-day warranty is stated
Cons
- Pack holds 1 clamp
- Aluminum alloy is the only material stated; no steel grade is given
- Listing gives no item weight
- All 4 holes share the 0.49 in size, so a base that needs a larger hole will not fit
Detailed Review
RTNLIT lists a desk lamp clamp with 4 bracket thread holes at 0.49 in, a C-clip opening of 2-1/2 in, double anti-slip pads and an aluminum alloy body. The clamp suits microphone arms, swing arm lamps, magnifying lamps, tablet arm mounts, gooseneck phone mounts and overhead camera arms, and fits desks, carts, benches and worktables. A 180-day warranty is stated, the only warranty term in this group.
Who it's for: someone mounting a mic arm or swing arm lamp on a desk up to 2-1/2 in thick who wants the warranty in writing. Who should skip it: anyone whose arm base needs a hole larger than 0.49 in, or anyone who wants a pack of more than 1 clamp.
Its Office Score of 9.7/10 comes from performance 32/35, build 22/25, value 21/25, safety 8/10 and warranty 4/5: 87 of 100 points, placed on our 9.2 to 9.8 scale.
Key Specifications
| Hole size | 0.49 in, 4 holes |
|---|---|
| Desk thickness | Up to 2-1/2 in |
| Material | Aluminum alloy |
| Warranty | 180 days |
Figures as published on the retailer listing, collected 12 November 2026. Performance figures are manufacturer rated.
Safety and Warranty
What this listing states. Double anti-slip pads on both contact points protect the desk, so safety scores 8 of 10. 180-day warranty. It does not say everything a buyer needs, such as who pays return shipping, so warranty scores 4 of 5. See How We Pick.
Match the mount. Check your screen's VESA pattern, size and weight against the stated range, and check that your desk thickness and edge suit a clamp or grommet mount before you drill or clamp.
This is general buying information, not professional advice. Follow each product manual and local rules, and see our Safety Disclaimer.

Jhanw 3 in C-Clamp
A 2-pack steel C-clamp with 4 small holes in the back, non-slip pads and a clamping range the listing states in 2 figures.
Pros
- 2-pack suits a mic arm and a lamp at once
- 4 small holes in the back take a privacy panel or pegboard
- Steel body with non-slip pads in the contact area
- Hexagonal flower handle-screw is 3.14 in long
Cons
- No warranty term is stated
- 0.9 lb item weight is stated with no capacity figure
- Black is the only color stated
Detailed Review
Jhanw lists a 3 in steel C-clamp in a 2-pack, with non-slip pads in the contact area and 4 small holes on the back for a privacy panel or pegboard. The title states a clamping range of 0.35 to 3.37 in, while the bullets state an opening of 3.54 in, a hexagonal flower handle-screw length of 3.14 in and a clamping range of 0.39 to 3.5 in. The ranges disagree, so measure your desk edge before ordering. No warranty term is stated.
Who it's for: someone who wants a steel clamp with a spare in the pack and holes for a privacy panel or pegboard. Who should skip it: anyone who needs a stated warranty term, or a listing with matching range figures.
Its Office Score of 9.6/10 comes from performance 30/35, build 21/25, value 22/25, safety 7/10 and warranty 0/5: 80 of 100 points, placed on our 9.2 to 9.8 scale.
Key Specifications
| Clamping range | 0.35 to 3.37 in (title), 0.39 to 3.5 in (bullets) |
|---|---|
| Holes | 4 small holes in back |
| Material | Steel |
| Pack | 2-pack |
Figures as published on the retailer listing, collected 12 November 2026. Performance figures are manufacturer rated.
Safety and Warranty
What this listing states. Non-slip pads in the contact area protect the desktop, so safety scores 7 of 10. No warranty term, so warranty scores zero. See How We Pick.
Match the mount. Check your screen's VESA pattern, size and weight against the stated range, and check that your desk thickness and edge suit a clamp or grommet mount before you drill or clamp.
This is general buying information, not professional advice. Follow each product manual and local rules, and see our Safety Disclaimer.

HLGHLG C-Clamp Lamp Holder
A white C-clamp lamp holder with a soft rubber pad, tool-free install and a mounting hole for bases under 0.47 in.
Pros
- Fits surfaces up to 2.24 in thick
- Soft rubber pad at the contact area protects the table surface
- Tool-free install: installs in seconds without any tools
- Takes swing arm lamps, microphone holders and phone brackets
Cons
- Mounting hole takes bases under 0.47 in only
- No warranty term is stated
- White is the only color stated
- No item weight is stated
Detailed Review
HLGHLG lists a white universal C-clamp lamp holder, with a screw clamp that grips surfaces up to 2.24 in and a soft rubber pad. It mounts swing arm lamps, microphone holders and phone brackets, and suits bases with a mounting hole diameter under 12 mm (0.47 in). Product dimensions are 3.8 by 3.4 by 1.22 in. Install is tool-free, with no warranty term stated.
Who it's for: someone mounting a swing arm lamp or mic holder on a desk up to 2.24 in thick who wants a white clamp with a rubber pad. Who should skip it: anyone whose base needs a hole of 0.47 in or more, or anyone who wants a warranty term.
Its Office Score of 9.6/10 comes from performance 29/35, build 20/25, value 21/25, safety 7/10 and warranty 0/5: 77 of 100 points, placed on our 9.2 to 9.8 scale.
Key Specifications
| Desk thickness | Up to 2.24 in |
|---|---|
| Hole | Under 0.47 in |
| Dimensions | 3.8 by 3.4 by 1.22 in |
| Color | White |
Figures as published on the retailer listing, collected 12 November 2026. Performance figures are manufacturer rated.
Safety and Warranty
What this listing states. Soft rubber pad at the contact area protects the table surface, so safety scores 7 of 10. No warranty term, so warranty scores zero. See How We Pick.
Match the mount. Check your screen's VESA pattern, size and weight against the stated range, and check that your desk thickness and edge suit a clamp or grommet mount before you drill or clamp.
This is general buying information, not professional advice. Follow each product manual and local rules, and see our Safety Disclaimer.

SUNMON Mic Boom Clamp
An aluminum alloy clamp for a microphone suspension boom arm, with foam padding at the contact point and a fit for desks up to 1.8 in.
Pros
- Aluminum alloy body with an adjustable positioning screw
- Fits desks up to 1.8 in thick
- Soft foam padding at the contact point protects the desktop
- Designed for a microphone suspension boom scissor arm stand
Cons
- Microphone boom arm is not included
- No warranty term is stated
- No hole size is stated
- Foam padding is bonded to the clamp, so a worn pad cannot be swapped
Detailed Review
SUNMON lists a metal desk clamp for a microphone suspension boom scissor arm stand, made from aluminum alloy with an adjustable positioning screw and soft foam padding. It clips to any desktop up to 1.8 in thick, and the microphone suspension boom scissor arm stand is not included. No hole size, warranty term or pack size is stated.
Who it's for: someone mounting a mic boom arm on a desk up to 1.8 in thick who wants foam padding between clamp and desk. Who should skip it: anyone who needs the boom arm included, or a stated hole size for the arm base.
Its Office Score of 9.5/10 comes from performance 28/35, build 21/25, value 19/25, safety 7/10 and warranty 0/5: 75 of 100 points, placed on our 9.2 to 9.8 scale.
Key Specifications
| Desk thickness | Up to 1.8 in |
|---|---|
| Material | Aluminum alloy |
| Padding | Soft foam, bonded |
| Use | Microphone boom arm |
Figures as published on the retailer listing, collected 12 November 2026. Performance figures are manufacturer rated.
Safety and Warranty
What this listing states. Soft foam padding at the contact point protects the desktop surface, so safety scores 7 of 10. No warranty term, so warranty scores zero. See How We Pick.
Match the mount. Check your screen's VESA pattern, size and weight against the stated range, and check that your desk thickness and edge suit a clamp or grommet mount before you drill or clamp.
This is general buying information, not professional advice. Follow each product manual and local rules, and see our Safety Disclaimer.

AYWGZL Desk C-Clamp 4-Pack
A 4-pack of metal and plastic C-clamps with a 0.49 in mounting hole, for desks from 0 to 1.77 in thick.
Pros
- 4-pack covers a mic stand, a lamp, a phone stand and a tablet holder
- Mounting hole diameter of 12.5 mm / 0.49 in
- Adjustable size from 0 to 45 mm / 0 to 1.77 in
- Suits bases less than 0.49 in in diameter
Cons
- Metal and plastic build, with no alloy grade stated
- No pad is stated to protect the desktop
- No warranty term is stated
- 1.77 in desk fit is the smallest top end here
Detailed Review
AYWGZL lists 4 black C-clamps in metal and plastic, with an adjustable size of 0 to 45 mm / 0 to 1.77 in and a mounting hole diameter of 12.5 mm / 0.49 in. The clamps suit swing arm desk lamps, phone stands, microphone stands and tablet holders with a base under 0.49 in. No pad, warranty term or item weight is stated.
Who it's for: someone who wants 4 clamps at once for mic stands, lamps and phone stands on a desk up to 1.77 in thick. Who should skip it: anyone who wants a pad between clamp and desk, or a desk fit above 1.77 in.
Its Office Score of 9.4/10 comes from performance 27/35, build 18/25, value 22/25, safety 0/10 and warranty 0/5: 67 of 100 points, placed on our 9.2 to 9.8 scale.
Key Specifications
| Hole | 12.5 mm / 0.49 in |
|---|---|
| Desk thickness | 0 to 1.77 in |
| Pack | 4-pack |
| Material | Metal and plastic |
Figures as published on the retailer listing, collected 12 November 2026. Performance figures are manufacturer rated.
Safety and Warranty
What this listing states. This product does not plug in or run on a battery, so safety is not part of its score. No warranty term, so warranty scores zero. See How We Pick.
Match the mount. Check your screen's VESA pattern, size and weight against the stated range, and check that your desk thickness and edge suit a clamp or grommet mount before you drill or clamp.
This is general buying information, not professional advice. Follow each product manual and local rules, and see our Safety Disclaimer.
As an Amazon Associate I earn from qualifying purchases.
More picks to compare
Zeromall C-Clamp 2-PackAluminum clamp with 1/4 and 3/8 in thread holes for mic arms and lampsCheck on Amazon
QWORK Desk C-Clamp 4-Pack4-pack clamp with 1/2 in thread hole for swing arm lamps and micsCheck on Amazon
CAMVATE C Clamp with Screw HoleAluminum clamp with 1/4 and 3/8 in holes for desks and benchesCheck on Amazon
Jhanw Desk C-ClampSteel clamp with 0.47 in arm hole and anti-slip pads for mic standsCheck on Amazon
LifCratms C-Clamp Base StandAluminum alloy clamp with 0.47 in hole, fits desks up to 2.3 inCheck on Amazon
Specs compared
| Clamp | Office Score | Hole size | Desk thickness | Pack | Material | Warranty | Amazon |
|---|---|---|---|---|---|---|---|
| RTNLIT Desk Lamp Clamp | 9.7/10 | 0.49 in, 4 holes | Up to 2-1/2 in | 1 | Aluminum alloy | 180 days | View on Amazon |
| Jhanw 3 in C-Clamp | 9.6/10 | 4 holes in back | 0.39 to 3.5 in | 2-pack | Steel | Not stated | View on Amazon |
| HLGHLG C-Clamp Lamp Holder | 9.6/10 | Under 0.47 in | Up to 2.24 in | 1 | Not stated | Not stated | View on Amazon |
| SUNMON Mic Boom Clamp | 9.5/10 | Not stated | Up to 1.8 in | 1 | Aluminum alloy | Not stated | View on Amazon |
| AYWGZL Desk C-Clamp 4-Pack | 9.4/10 | 0.49 in | 0 to 1.77 in | 4-pack | Metal and plastic | Not stated | View on Amazon |
Specs reflect manufacturer claims on each product listing (as of 12 November 2026). 1 of the 5 states a warranty term; 4 state pads that protect the desk.
How to choose the best desk clamp with hole
Match the hole to your arm base
Match the hole to the arm before anything else. The RTNLIT and AYWGZL list a 0.49 in hole, and the AYWGZL also lists a 1/2 in thread hole, while the HLGHLG takes bases under 0.47 in. The Jhanw lists 4 small holes in the back for a privacy panel or pegboard, and the SUNMON states no hole size. A base wider than the hole will not fit. A boom arm guide such as best boom arm microphone for home studio shows what hangs from these holes.
Measure the desk edge before you buy
Desk thickness decides the fit. The Jhanw lists a clamping range of 0.39 to 3.5 in in the bullets against 0.35 to 3.37 in in the title, the RTNLIT fits up to 2-1/2 in, the HLGHLG up to 2.24 in, the SUNMON up to 1.8 in, and the AYWGZL 0 to 1.77 in. Measure the edge where the clamp will sit, apron and trim included, and buy one whose range covers it.
Pads decide whether the desk stays clean
A clamp grips by pressure, so the pad stands between metal and desktop. The RTNLIT lists double anti-slip pads on both contact points, the HLGHLG a soft rubber pad, the Jhanw non-slip pads in the contact area, and the SUNMON soft foam padding bonded to the clamp. The AYWGZL states no pad. If you care about the desk top, pick a clamp that names its pad.
Count the pack before you order
Pack size runs from 1 to 4 here. The AYWGZL comes as a 4-pack for a mic stand, lamp, phone stand and tablet holder, the Jhanw comes as a 2-pack with a spare, and the RTNLIT, HLGHLG and SUNMON each come as 1. A 4-pack suits a desk with a mic, lamp and phone stand; a 2-pack suits a mic arm plus a lamp. best desk lamp with clamp shows lamps that hang from the same kind of base.
Clamp, hole and desk fit at a glance
| Clamp | Hole | Desk thickness | Pack |
|---|---|---|---|
| RTNLIT Desk Lamp Clamp | 0.49 in, 4 holes | Up to 2-1/2 in | 1 |
| Jhanw 3 in C-Clamp | 4 holes in back | 0.39 to 3.5 in | 2-pack |
| HLGHLG C-Clamp Lamp Holder | Under 0.47 in | Up to 2.24 in | 1 |
| SUNMON Mic Boom Clamp | Not stated | Up to 1.8 in | 1 |
| AYWGZL Desk C-Clamp 4-Pack | 0.49 in | 0 to 1.77 in | 4-pack |
Figures as stated in each listing.
Setup Notes
- Measure the desk edge where the clamp will sit and compare it with the stated range: 0.39 to 3.5 in on the Jhanw, 0 to 1.77 in on the AYWGZL.
- Match the arm base to the hole: 0.49 in on the RTNLIT and AYWGZL, under 0.47 in on the HLGHLG.
- Check the pad before you tighten: foam on the SUNMON, non-slip pads on the Jhanw, rubber on the HLGHLG, double anti-slip pads on the RTNLIT.
- Route the lamp or mic cable clear of the clamp screw so the cord never pulls the arm off center.
- Keep the clamp screw clear of any apron or trim under the desk top, and leave room to turn the handle.
FAQ
What hole size fits a swing arm mic stand?
The RTNLIT and AYWGZL list a 0.49 in hole; the AYWGZL also lists a 1/2 in thread hole. The HLGHLG takes bases under 0.47 in, so check the arm base against the hole.
How thick a desk can these clamps grip?
The Jhanw lists 0.39 to 3.5 in, the RTNLIT fits up to 2-1/2 in, the HLGHLG up to 2.24 in, the SUNMON up to 1.8 in, and the AYWGZL 0 to 1.77 in.
Do desk clamps damage the desktop?
A pad protects the top. The RTNLIT lists double anti-slip pads, the HLGHLG a soft rubber pad, the Jhanw non-slip pads and the SUNMON soft foam padding. The AYWGZL states no pad.
Can I mount a desk lamp on these clamps?
The RTNLIT, AYWGZL and HLGHLG list swing arm desk lamps among their uses, and the HLGHLG also lists magnifying lamps. Check the lamp base against the hole size.
Which clamp comes with a warranty?
The RTNLIT states a warranty term of 180 days. The others state no warranty term.
Score breakdown
The Office Score weighs performance (hole size, desk thickness range and arm compatibility), build (material and pads), value for the stated specs, safety and warranty. For a clamp, safety means pads that protect the desktop and a grip that holds the arm steady; the SUNMON, Jhanw, HLGHLG and RTNLIT state pads, and the AYWGZL states none. The RTNLIT is the only listing here that states a warranty term, at 180 days. How we pick explains the weights.
| Product | Office Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| RTNLIT Desk Lamp Clamp | 9.7 | 32 | 22 | 21 | 8 | 4 |
| Jhanw 3 in C-Clamp | 9.6 | 30 | 21 | 22 | 7 | 0 |
| HLGHLG C-Clamp Lamp Holder | 9.6 | 29 | 20 | 21 | 7 | 0 |
| SUNMON Mic Boom Clamp | 9.5 | 28 | 21 | 19 | 7 | 0 |
| AYWGZL Desk C-Clamp 4-Pack | 9.4 | 27 | 18 | 22 | 0 | 0 |
The scale opens at 9.2 and closes at 9.8; between those marks, weighted points translate linearly into the score you see.
More for your workspace
See every monitor arm and stand guide and all computer peripheral guides. Also see our best boom arm microphone for home studio. Also see our best desk lamp with clamp. Also see our best monitor arm for home studio. Also see our best clamp on keyboard tray. Also see our best microphone mount with pop filter.
More picks: desk lamps and light bars, best swing arm desk lamp, best monitor arm for dorm room.





