A fresh roll of labels should be a small job: peel, stick, move on. It turns into a fiddly one when the tape in the drawer is the wrong width for the machine, or the cartridge runs out halfway through a shelf of jars. Label maker tape sizes look confusing from the outside, with width, length and cartridge codes all doing separate jobs, but the range on sale is narrower than the shelf suggests. This guide sorts it out: the standard width, the lengths each cartridge holds, and how to match a tape to the label maker on your desk.
OfficeKitHQ earns a commission when you buy through links on this page, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Affiliate disclosure.
The quick answer
Every reference tape in this guide is 12 mm wide, which the makers also state as 0.47 in. What changes is the cartridge: a Brother TZe-231 (on Amazon) cartridge holds 26.2 feet of tape, or 8 m, while a Dymo LetraTag 91330 or 91331 cartridge holds 13 feet, or 4 m. Match the cartridge code to your label maker model, pick laminated tape for damp shelves and outdoor bins, and pick paper tape for plain indoor filing. Pack sizes run from 3-pack to 6-pack, and a 6-pack of one Brother-compatible tape is listed as cutting the cost per label by 62% against buying a single cartridge.
Label maker tape sizes at a glance
The chart below gathers the widths, lengths and pack sizes the makers state for the cartridges in this guide. Every width here is 12 mm, so the choice is about length and cartridge fit, not width.
| Cartridge | Width | Length per cartridge | Pack sizes |
|---|---|---|---|
| Brother TZe-231 | 12 mm (0.47 in) | 26.2 feet (8 m) | 4-pack, 6-pack |
| Dymo LetraTag 91330, paper | 12 mm (0.47 in) | 13 feet (4 m) | 3-pack, 6-pack |
| Dymo LetraTag 91331, plastic | 12 mm (0.47 in) | 13 feet (4 m) | 3-pack, 5-pack |
Cartridge families in this guide come down to Brother TZe-231 and Dymo LetraTag 91330 and 91331. A Brother cartridge holds 26.2 feet of tape and a LetraTag cartridge holds 13 feet, and pack sizes run from 3-pack to 6-pack.
Step 1: Check your label maker model
Start with the model on the label maker, not the tape. Brother TZe-231 tape is listed for Brother P-Touch models including the PT-D210, PT-D220, PT-H110 and PT-D400, and Dymo LetraTag 91330 and 91331 refills are listed for the LT-100H, LT-100T and 200B. The lists run longer than the models named here, so check the full compatibility list for your machine before you order. Brother TZe tape is not listed as compatible with label makers made for M, TC or BTAG type tapes, and one listing names the PT-M95, PT-70BM, PT-45M, PT-N10, PT-N20 and PT-N25BT as machines its TZe-231 tape does not fit.
Step 2: Match the width
Width is the simple part. Every cartridge in this guide is 12 mm wide, stated as 0.47 in on the Brother-compatible tapes and as 12 mm on the LetraTag refills. A 12 mm tape prints a single line of text sized for file tabs, jar labels, cable flags and shelf edges, and it fits any label maker that takes a 12 mm cartridge. If your machine takes a wider or narrower cartridge, the tapes in this guide do not fit it.
Step 3: Match the length and pack size
Length is where the cartridge families part company. A Brother TZe-231 cartridge holds 26.2 feet of tape, or 8 m, and a Dymo LetraTag cartridge holds 13 feet, or 4 m. The pack size sets how many cartridges arrive in the box: Brother-compatible TZe-231 tape is listed in 4-pack and 6-pack boxes, LetraTag 91330 paper tape in 3-pack and 6-pack boxes, and LetraTag 91331 plastic tape in 3-pack and 5-pack boxes. One maker lists its 6-pack as cutting the cost per label by 62% against a single cartridge, and another lists a 65% drop in unit price for its 6-pack against a single cartridge.
Step 4: Pick the tape material
Material decides where the label survives. Laminated Brother-compatible tape is listed as resisting water, fading, grease and abrasion, and one maker lists its laminated tape as withstanding temperatures from -30°C (-22°F) to 120°C (258°F). Paper LetraTag tape is listed for indoor filing and marking, and it prints by heat with no ink or toner. Plastic LetraTag tape is listed as wipeable, hard to tear and suited to indoor use, and colored plastic refills in black on fluorescent yellow, green, orange and neon pink are listed for the same LetraTag models.
What to check before you order
Read the cartridge code, the width and the length together before you order. A TZe-231 cartridge fits Brother P-Touch machines that take TZe tape, and a 91330 or 91331 cartridge fits Dymo LetraTag machines; the codes do not cross over. Check the color too: black on white is the standard listing here, and the colored plastic refills print black on fluorescent yellow, green, orange or neon pink.
FAQ
What is the standard label maker tape width?
The tapes in this guide are all 12 mm wide, stated as 0.47 in on Brother-compatible cartridges. Width is the same across the Brother and Dymo cartridges listed here, so the cartridge code, not the width, is what you match to your machine.
How long is a Brother TZe-231 cartridge?
A Brother TZe-231 cartridge holds 26.2 feet of tape, or 8 m. The genuine Brother listing and the compatible listings state the same length.
How long is a Dymo LetraTag refill?
A Dymo LetraTag 91330 paper refill and a 91331 plastic refill each hold 13 feet of tape, or 4 m. Both are listed in 3-pack boxes, and the 91330 also comes in a 6-pack while the 91331 also comes in a 5-pack.
Does label maker tape work outdoors?
Laminated tape is listed for indoor and outdoor use, and one maker lists its laminated tape as withstanding temperatures from -30°C (-22°F) to 120°C (258°F). Paper tape is listed for indoor filing, so keep paper labels inside.
More for your workspace
See the best label makers for home and office, the label maker types, the best cable label makers and the best label makers for office use.





