A laptop charger stops fitting when the tip is the wrong size, and the wrong tip will not charge the laptop at all. A laptop charger tip size chart lists the tip sizes in mm and the laptop brands each size fits, so you can match the tip to the socket. The common base for these tip kits is 5.5 x 2.1 mm, and the chart below starts from that base. The steps after the chart show how to measure your socket and confirm the fit.
OfficeKitHQ earns a commission when you buy through links on this page, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Affiliate disclosure.
The quick answer
Measure the socket on your laptop, then find that size in the chart below. The tip kits in this guide share a 5.5 x 2.1 mm female base, and each tip changes that base to a different size for a laptop brand. Match the tip size and the brand to your laptop, and check that the kit fits your laptop before you order.
Laptop charger tip size chart
| Tip size | Fits |
|---|---|
| 7.4 x 5.0 mm | HP Compaq Pavilion |
| 6.3 x 3.0 mm Tuning Fork | Lenovo |
| 5.5 x 2.5 mm Tuning Fork | ASUS, Toshiba, HP, MSI, IBM, Panasonic, Lenovo |
| 5.5 x 2.1 mm Tuning Fork | HP, Sega |
| 5.5 x 1.9 mm DC | Asus |
| 5.5 x 1.7 mm Tuning Fork | Hasee, Acer, Lenovo, Asus, BenQ, Toshiba |
| 4.8 x 1.7 mm Tuning Fork | HP Pavilion, Sony, Asus Eee, NEC, Delta, Compaq |
| 4.0 x 1.7 mm Tuning Fork | Asus, BenQ, Acer, Sony PSP, HP (mini) |
| 4.0 x 1.35 mm Tuning Fork | Asus Zenbook |
| 3.5 x 1.35 mm DC | Fujitsu, Dell, Sharp |
| 3.0 x 1.1 mm DC | Samsung |
| 2.5 x 0.7 mm Tuning Fork | Dell, Samsung, Sharp, Android Tablet |
The sizes in the chart come from a 34 piece tip kit, and the same sizes appear across the other kits in this guide. A tip size is a pair of numbers in mm: the outer diameter, then the inner diameter or pin. A tip that is close in size but not exact will not fit the socket, so match the numbers. The 5.5 x 2.1 mm size is the base and a tip size in its own right, so it appears in the chart as a tip that fits HP and Sega.
Step 1: Find the size on your old tip
Start with the tip you already have. Check the plug size before you order, and measure the DC interface size of the laptop to ensure a proper fit. The socket is the round hole where the charger plugs in. Measure the socket on the laptop, then find that size in the chart above.
Step 2: Match the tip to your laptop brand
Use the chart above to find the tip size for your laptop brand. A 7.4 x 5.0 mm tip fits HP Compaq Pavilion, a 5.5 x 1.9 mm DC tip fits Asus, and a 3.5 x 1.35 mm DC tip fits Fujitsu, Dell and Sharp. A 3.0 x 1.1 mm DC tip fits Samsung, and a 2.5 x 0.7 mm Tuning Fork tip fits Dell, Samsung, Sharp and Android Tablet. If your brand appears under several sizes, check the socket to pick the right tip. For the charger types, see laptop charger types.
Step 3: Check the base and the voltage
Check that the tip fits the base of the kit. The kits in this guide use a 5.5 x 2.1 mm female base, and each tip plugs into that base and changes it to a different size. Check the voltage too: a kit in this guide adjusts from 12 to 24V, with 12, 15, 16, 18, 19, 20, 24V settings. Match the voltage to the laptop’s own adapter, and use the cord that comes with the kit. For wattage and voltage, see laptop charger specs.
Step 4: Confirm the fit before you order
Confirm the fit before you order. Check the plug size, the brand and the voltage against your laptop, and read the kit’s own notes on what it does not fit. The kits in this guide do not fit Mac laptops, and some do not fit Dell mini 1018, Dell Inspiron 5558, ASUS Q504UA 2017 or Xiaomi laptops. If the size is not in the chart, the kit will not fit your laptop.
What the kit piece counts mean
The kits in this guide hold 8, 10, 34, 38, 41, 42 or 45 pieces. A kit with more pieces covers more tip sizes, so pick a kit that holds the size your laptop needs. A kit in this guide comes with 1 power cord, 2 banana tips, 2 chucks, and 1 storage box, so the pieces stay together.
FAQ
What size is the base for these tip kits?
The base is 5.5 x 2.1 mm. The kits in this guide use a 5.5 x 2.1 mm female base, and each tip changes that base to a different size.
How do you measure a laptop charger tip?
Measure the socket on the laptop, not the tip alone. The kits in this guide suggest measuring the DC interface size of the laptop to ensure a proper fit. Match the numbers in mm to the chart above.
Do these tip kits fit a Mac laptop?
No. The kits in this guide do not fit Mac laptops, and the makers state that directly. If you use a Mac laptop, these universal tip kits will not fit it.
What voltage do these tip kits use?
It depends on the kit. A kit in this guide adjusts from 12 to 24V, with 12, 15, 16, 18, 19, 20, 24V settings. Match the voltage to the laptop’s own adapter.
More for your workspace
See the laptop charger types, the laptop charger specs, the best laptop charger with multiple connectors and the best laptop charger guides, plus every docking stations and USB hubs guide and all connectivity guides.





