Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›

Home office gear, compared spec by spec.

Amazon Black Friday Week deals
Webcams and Ring Lights

Ring Light Setup: Stand, Mount and Placement

Ring light setup, step by step: pick a stand or mount, set the height, place the light by the camera, and tune brightness and color temperature.

Ring Light Setup: Stand, Mount and Placement

A video call starts with a face in shadow while bright window light falls from the side, and the camera shows a dim outline instead of a clear face. A ring light setup puts a circle of light around the camera lens, so the light falls evenly on the face from the front and the screen shows a clear image for calls, lessons and recordings. The setup is a stand or a mount, a ring light mounted on it, a phone or camera in the center, and power within reach of the desk. The steps below show how to pick the support, set the height, place the light, and tune brightness and color temperature with the figures the listings state.

OfficeKitHQ earns a commission when you buy through links on this page, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Affiliate disclosure.

The quick answer

Ring light setup means mounting the light on a stand or a desk clamp, raising it to eye level, placing it just behind the camera, and tuning brightness and color temperature while watching the preview. A floor tripod that adjusts from 28.7 to 72 inches suits a room corner or a home studio, while a desk clamp stand that adjusts from 19 to 39 inches suits a desk with no floor space to spare. A light that adjusts from 3000K to 6500K and from 10% to 100% brightness gives room to match daylight or warm room light. Check the load limit before mounting a light, because a small stand that holds up to 2 lb cannot carry a large ring light.

Ring light setup height chart

Support Height range Load capacity
ClarVise tripod stand 22 to 63 inches Up to 2 lb
Neewer light stand Maximum height 74.8 inches; folded height 25.98 inches 13.5 pounds
UTEBIT light stand, 2-pack 15.7 to 44.9 inches 6.6 lbs
SMALLRIG desk clamp stand 19 to 39 inches with ball head and C-clamp 6.6 pounds
ULANZI MT-89 light stand Height 79 inches; folded height 15.16 inches 2.2 lbs
HALLUV ring light tripod 28.7 to 72 inches Not stated

The listings state the ranges in different ways, so read the bullets as well as the title. The Neewer title states 75 inches while the bullets state a maximum height of 74.8 inches, and the SMALLRIG title states 15 to 35 inches while the bullets state 19 to 39 inches with the ball head and C-clamp fitted. Use the bullet range when planning the height, because it states what the stand reaches in use.

Step 1: Choose the stand or mount

Start with the size and weight of the light, then match the support to it. The ClarVise listing states it suits small, centered gear up to 2 lb, including compact LED lights up to 10 inches, and it states plainly that it is not built for 18 inch ring lights, so a large ring light needs a heavier stand. The Neewer stand (on Amazon) lists a maximum load capacity of 13.5 pounds, and the UTEBIT stand (on Amazon) lists 6.6 lbs, so either stand carries a larger light with room to spare. A desk clamp mount saves floor space: the SMALLRIG stand clamps (on Amazon) to the desk and lists a maximum load capacity of 6.6 pounds, while the ULANZI MT-89 (on Amazon) lists a load of 2.2 lbs and works as a handheld stand for a small light. See the best ring light mounts under 30 and the best ring lights with tripods under 1000 for mounts and tripod kits that match these sizes.

Step 2: Place the stand and set the height

Put the stand where it will not block the desk or the door, spread the legs wide, and keep the load centered over the base. The ClarVise listing advises spreading the legs wide and keeping the load centered for stability, and its non-slip rubber feet grip hard floors. Extend the sections in turn and hand-tighten each twist-lock collar until snug, without forcing the collars, because the listing warns that forcing them can deform them and stop them gripping. Raise the light to eye level, then lock each section before mounting the light, so the height does not slip while the light is on the stand. A stand that folds down small, such as the ClarVise at 22.4 inches folded or the ULANZI at 15.16 inches folded, also packs away when the call ends.

Step 3: Set brightness and color temperature

Power the light, then tune it while watching the camera preview instead of judging it by eye alone. The HALLUV ring light (on Amazon) lists 24W of power, up to 1800 lumens, and CRI 95+, with brightness that adjusts from 10% to 100% and color temperature that adjusts from 3000K to 6500K. Start near the middle of the brightness range and raise it until the face looks clear without harsh glare, then shift the color temperature toward daylight or toward warm room light until skin tones look natural on screen. The HALLUV listing states a digital display shows both settings, which helps in recreating a preferred setup, and the included Bluetooth remote starts photos or video recording from a distance. See the best ring lights for webcam video calls for lights with dimming and color controls.

Step 4: Mount the phone or camera and check the frame

Mount the camera in the center of the ring, or on the phone holder, and check the frame before the call starts. Most of these stands use a standard 1/4 inch screw, and the SMALLRIG stand adds a 1/4 inch ball head that allows 360 degree rotation and -90 degree to +45 degree front tilt, so the light can angle without coming off the stand. The HALLUV light includes a 7.5-inch flexible phone holder with 360 degree phone rotation for portrait or landscape shooting, and the UTEBIT stands include 2 phone clamps and 2 action camera adapters. The ULANZI ball head rotates vertically up to 180 degrees, which helps when the light needs to point down for a close-up tutorial. Route the power cable behind the desk, keep the adapter within reach, and run a short check call to confirm the light stays put and the frame stays steady.

Ring light setup on a small desk

A small desk suits a clamp mount or a compact tripod rather than a full floor stand. The SMALLRIG desk clamp stand suits tables with a thickness of 4.7 cm / 1.85 inches, weighs 15 ounces / 430 grams, and takes up no floor space, while the ClarVise tripod weighs 0.33 kg / 0.73 lb and folds down to 22.4 inches x 2.76 inches for a backpack or a shelf. Keep the base clear of the keyboard and the mouse, and keep the light close enough to the camera that the face stays lit without the stand crowding the work surface. See the best ring lights for small desks for lights sized for tight desks.

FAQ

How high should a ring light stand be?

Raise it to eye level, within the range the stand lists. The HALLUV tripod adjusts from 28.7 to 72 inches, the ClarVise tripod from 22 to 63 inches, and the SMALLRIG desk clamp stand from 19 to 39 inches, so pick the support that reaches eye level from the floor or from the desk.

What color temperature should a ring light use for video calls?

Use a light that adjusts across a wide range, then tune it while watching the preview. The HALLUV ring light adjusts from 3000K to 6500K with CRI 95+, so it covers warm room light and daylight, and the digital display shows the setting in use.

Can a small tripod hold a ring light?

It depends on the weight and the size of the light. The ClarVise tripod holds up to 2 lb and suits compact LED lights up to 10 inches, but the listing states it is not built for 18 inch ring lights. The ULANZI MT-89 lists a load of 2.2 lbs, while the Neewer stand lists 13.5 pounds for heavier lights.

Does a ring light setup need a phone holder?

Not always, but a holder keeps the phone in the center of the light. The HALLUV light includes a 7.5-inch flexible phone holder with 360 degree rotation, the UTEBIT stands include 2 phone clamps, and the SMALLRIG stand includes a ring light adapter with a 1/4 inch ball head.

More for your workspace

See the best ring lights under 40, the best ring light mounts, the best ring lights with tripod stands and the webcams and ring lights guides.