Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›

Home office gear, compared spec by spec.

Amazon Black Friday Week deals
Webcams and Ring Lights

Ring Light Replacement Parts: What to Replace and Where

Ring light replacement parts, from phone holders and gooseneck arms to hot shoe adapters: what each part replaces, what thread it needs, and how to check the fit.

Ring Light Replacement Parts: What to Replace and Where

On a morning video call, when the webcam picture goes dim and the phone slips off the ring light, the question is what broke, and ring light replacement parts are usually the answer: the phone holder, the gooseneck arm or the adapter that joins them. When a ring light stops holding the phone, the failure often sits in one of those pieces, and each one swaps out on its own, so you replace the broken part instead of the whole light. This guide shows which part to replace, how to check the fit, and when the whole light is the part that failed.

OfficeKitHQ earns a commission when you buy through links on this page, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Affiliate disclosure.

Ring light replacement parts: the quick answer

Replace the phone holder first: it is the piece that holds the phone, and it wears out from daily clamping and bending. Next check the gooseneck arm, the flexible tube that aims the phone, and then the adapter, the small piece that joins the holder to the light or the tripod. Match the thread and the phone fit before you order, and the new part screws straight on.

What breaks, and what replaces it

Part What it does Check before ordering Amazon
Phone holder Clamps the phone in the ring Phone size and clamp range
Gooseneck arm Bends the phone to the angle you want Tube length and thread
Adapter Joins the holder to the light or tripod 1/4 thread or hot shoe
Ring light The light itself Size, LEDs and power

The holders in this guide each combine a phone holder, a gooseneck arm and an adapter, so one part replaces the holder, the arm and the joint at once. The Neewer light covers the last row, for when the ring itself is the part that failed.

Check the thread first

Every holder in this guide lists a 1/4 inch thread and a hot shoe adapter, so the thread is the first fit to check. The JCTRIWAY holder lists a 1/4 inch female thread, a hot shoe mount and a 1/4 inch male-to-male adapter for joining female threads. The Leenconghui holder (on Amazon) lists a 1/4-20 thread with its hot shoe adapter, and the Sanmrajian holder (on Amazon) lists a 1/4 inch threaded connector with its hot shoe adapter. Match the thread on the light and the tripod to the thread on the holder, and the part screws on without an extra adapter. See our ring light setup guide for stand, mount and placement.

Check the phone fit

Phone fit is stated in different measures in these listings, so read the figure as the maker states it. The JCTRIWAY holder fits phones from 2.3 to 3.4 inches, and names iPhone, Samsung, Huawei and Google Pixel models. The Leenconghui and Sanmrajian holders fit phones from 4.5 to 7 inches, even with cases on, and both use a plastic clip or clamp to hold the phone. Measure your phone, case and all, against the stated range before you order, and check the clamp style: the Sanmrajian clamp is spring-loaded, while the JCTRIWAY clamp locks.

The gear

The holders below cover the thread and phone-fit checks above: each one lists its thread, its tube length and its phone fit, and the cards show which part of the job it handles.

Leenconghui Phone Holder

Leenconghui Phone Holder

Leenconghui9.6/10 Office Score
i
The Office Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A flexible phone mount for ring lights and tripods with a 14cm aluminum alloy tube, a 1/4-20 and hot shoe adapter, and a fit for 4.5 to 7 inch phones with cases on.

Pros

  • Fits phones from 4.5 to 7 inches, even with cases on
  • 14cm flexible metal tube for angle adjustment
  • 1/4-20 and hot shoe adapter fits ring lights and tripod stands
  • Aluminum alloy gooseneck arm, sturdy and flexible

Cons

  • 14cm tube is shorter than the 15cm JCTRIWAY tube
  • Plastic phone clip rather than a metal clamp
  • No warranty term is stated
  • Fits phones up to 7 inches, so larger phones are out
Detailed Review

Leenconghui lists a universal phone holder for ring lights and tripod stands, with a removable design, a 14cm flexible metal tube and a 1/4-20 and hot shoe adapter. The gooseneck arm is aluminum alloy, and the plastic phone clip holds the phone at any angle. The holder fits phones from 4.5 to 7 inches, even with cases on, and the maker calls it a replacement part for on-the-go filming and photography.

Who it's for: streamers and callers who want a light, portable holder that fits cased phones from 4.5 to 7 inches. Who should skip it: anyone who needs a longer tube, a metal clamp, or a stated warranty term.

Its Office Score of 9.6/10 comes from performance 29/35, build 21/25, value 21/25, safety not scored (non-powered gear) and warranty 0/5: 71 of 90 points, placed on our 9.2 to 9.8 scale.

Key Specifications
Tube14cm flexible metal
Thread1/4-20 and hot shoe
Phone fit4.5 to 7 inches
MaterialAluminum alloy

These specs mirror the retailer listing as of 14 November 2026; performance figures are stated by the brand.

Safety and Warranty

What this listing states. This product does not plug in or run on a battery, so safety is not part of its score. No warranty term, so warranty scores zero. See How We Pick.

Light and privacy. Use the supplied adapter for ring lights, keep lights and cords away from drinks and paper, and cover or unplug a webcam when it is not in use.

This is general buying information, not professional advice. Follow each product manual and local rules, and see our Safety Disclaimer.

JCTRIWAY Phone Holder

JCTRIWAY Phone Holder

JCTRIWAY9.6/10 Office Score
i
The Office Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A ring light phone holder with a 15cm aluminum alloy gooseneck, a 1/4 female thread, a hot shoe mount and a 1/4 male-to-male adapter, for phones from 2.3 to 3.4 inches.

Pros

  • 15cm gooseneck tube, the longest tube in this set
  • Includes a 1/4 male-to-male adapter as well as the hot shoe mount
  • Aluminum alloy gooseneck, strong and flexible
  • Plastic phone clamp with solid locking

Cons

  • Phone fit is stated as 2.3 to 3.4 inches, so check your phone against that range first
  • Plastic phone clamp rather than a metal clamp
  • Built for phones only, not cameras
  • Pocket-size build is easy to misplace
Detailed Review

JCTRIWAY lists a universal phone holder for ring lights and tripod stands, with a 15cm soft metal gooseneck tube, a 1/4 inch female thread, a hot shoe mount, a 1/4 inch male-to-male adapter and a universal phone holder. The gooseneck is aluminum alloy, and the plastic phone clamp locks the phone in place. The holder fits phones from 2.3 to 3.4 inches, including iPhone, Samsung, Huawei and Google Pixel models, and the maker calls it a ring light replacement part for video interviews and live recording.

Who it's for: anyone whose phone holder broke and who wants the longest tube here plus the adapter in the box. Who should skip it: anyone with a phone outside the 2.3 to 3.4 inch range or who needs a camera mount.

Its Office Score of 9.6/10 comes from performance 29/35, build 21/25, value 20/25, safety not scored (non-powered gear) and warranty 0/5: 70 of 90 points, placed on our 9.2 to 9.8 scale.

Key Specifications
Tube15cm gooseneck
Thread1/4 female, hot shoe
Phone fit2.3 to 3.4 inches
MaterialAluminum alloy

These specs mirror the retailer listing as of 14 November 2026; performance figures are stated by the brand.

Safety and Warranty

What this listing states. This product does not plug in or run on a battery, so safety is not part of its score. No warranty term, so warranty scores zero. See How We Pick.

Light and privacy. Use the supplied adapter for ring lights, keep lights and cords away from drinks and paper, and cover or unplug a webcam when it is not in use.

This is general buying information, not professional advice. Follow each product manual and local rules, and see our Safety Disclaimer.

Sanmrajian Phone Holder

Sanmrajian Phone Holder

Sanmrajian9.6/10 Office Score
i
The Office Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A ring light phone holder with a 14cm aluminum alloy gooseneck, a 1/4 inch thread and hot shoe adapter, and a spring-loaded clamp for 4.5 to 7 inch phones with cases.

Pros

  • Fits phones from 4.5 to 7 inches, including devices with cases
  • Spring-loaded clamp grips phones of various sizes
  • 14cm flexible metal tube bends and twists to any angle
  • 1/4 inch thread and hot shoe adapter for ring lights, tripods and cameras

Cons

  • 14cm tube is shorter than the 15cm JCTRIWAY tube
  • Plastic phone clamp rather than a metal clamp
  • Fits phones up to 7 inches, so larger phones are out
  • Compact, bag-size build is easy to misplace
Detailed Review

Sanmrajian lists a ring light phone holder with a detachable design, a 14cm flexible gooseneck arm, a 1/4 inch threaded connector and a hot shoe adapter. The arm is aluminum alloy, and the spring-loaded plastic clamp grips phones from 4.5 to 7 inches, including devices with protective cases. The maker calls it a replacement accessory for ring light setups, for live streaming, video calls, selfies and recording.

Who it's for: creators who want a spring-loaded clamp and a cased-phone fit on a light, portable holder. Who should skip it: anyone who needs a longer tube, a metal clamp, or a phone above 7 inches.

Its Office Score of 9.6/10 comes from performance 28/35, build 21/25, value 20/25, safety not scored (non-powered gear) and warranty 0/5: 69 of 90 points, placed on our 9.2 to 9.8 scale.

Key Specifications
Tube14cm gooseneck
Thread1/4 and hot shoe
Phone fit4.5 to 7 inches
ClampSpring-loaded plastic

These specs mirror the retailer listing as of 14 November 2026; performance figures are stated by the brand.

Safety and Warranty

What this listing states. This product does not plug in or run on a battery, so safety is not part of its score. No warranty term, so warranty scores zero. See How We Pick.

Light and privacy. Use the supplied adapter for ring lights, keep lights and cords away from drinks and paper, and cover or unplug a webcam when it is not in use.

This is general buying information, not professional advice. Follow each product manual and local rules, and see our Safety Disclaimer.

Neewer 55W 18-Inch Ring Light

Neewer 55W 18-Inch Ring Light

NEEWER9.4/10 Office Score
i
The Office Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

An 18-inch, 55W ring light with 240 LEDs at 5500K, sold as the light only with filters and a carry bag.

Pros

  • 55W power with 240 LEDs stated
  • Dimming from 1%-100% with a fixed 5500K temperature
  • Includes orange and white color filters, a soft tube and a phone shutter remote
  • 1-year manufacturer warranty stated

Cons

  • The listing states the light stand is not included
  • Color temperature is fixed at 5500K with no range
  • No safety certification is stated
  • The listing does not state a phone holder
Detailed Review

Neewer lists an 18-inch ring light at 55W with 240 LEDs and a 5500K color temperature, dimmable from 1%-100%. The box includes the ring light, a soft tube, a phone shutter remote, an orange plastic filter, a white plastic filter and a US plug adapter, plus a carrying bag. The listing states the light stand is not included. The bullets state no ultraviolet or infrared radiation and low heat output. The maker states a 1-year manufacturer warranty.

Who it's for: someone who already owns a stand and wants a straightforward 5500K light. Who should skip it: anyone who wants a stand in the box or a range of color temperatures.

Its Office Score of 9.4/10 comes from performance 27/35, build 19/25, value 19/25, safety 0/10 and warranty 3/5: 68 of 100 points, placed on our 9.2 to 9.8 scale.

Key Specifications
LED beads240
Power55W
Color temperature5500K
Dimming1%-100%

Figures as published on the retailer listing, collected 23 October 2026. Performance figures are manufacturer rated.

Safety and Warranty

What this listing states. No FCC or other safety listing is stated, so safety scores zero. 1 Year Manufacturer. It does not say everything a buyer needs, such as who pays return shipping, so warranty scores 3 of 5. See How We Pick.

Light and privacy. Use the supplied adapter for ring lights, keep lights and cords away from drinks and paper, and cover or unplug a webcam when it is not in use.

This is general buying information, not professional advice. Follow each product manual and local rules, and see our Safety Disclaimer.

As an Amazon Associate I earn from qualifying purchases.

When to replace the whole light

When the ring itself fails, no holder or adapter will bring it back. The Neewer light (on Amazon) in this guide is an 18-inch ring at 55W with 240 LEDs, 5500K and filters, a whole-light replacement for a ring whose LEDs or power gave out. If the ring still lights and only the holder slips, replace the holder and keep the light. Our best 18 inch ring light picks compare more full lights.

FAQ

What thread does a ring light phone holder use?

A 1/4 inch thread or a hot shoe adapter. Every holder in this guide lists both, and the JCTRIWAY holder adds a 1/4 inch male-to-male adapter for joining female threads.

Will a phone holder fit my phone?

Check your phone against the stated range. The JCTRIWAY holder fits phones from 2.3 to 3.4 inches, while the Leenconghui and Sanmrajian holders fit phones from 4.5 to 7 inches, even with cases on.

Can I replace just the gooseneck arm?

The holders in this guide combine the holder, the arm and the adapter in one part, so replacing the holder replaces the arm with it. The JCTRIWAY arm runs 15cm and the Leenconghui and Sanmrajian arms run 14cm.

Do I need a new ring light or just a part?

Replace the part when the holder, arm or adapter fails and the ring still lights. Replace the whole light when the ring itself fails; the Neewer 18-inch light in this guide is a whole-light replacement at 55W with 240 LEDs.

Leenconghui Phone Holder
Still deciding? Our top pickLeenconghui Phone Holder
Check price on Amazon

More for your workspace

See every webcams and ring lights guide and all computer peripherals guides.

More picks: ring light sizes, ring light for small desk, webcam tripod stand and ring light for standing desk.