Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›

Home office gear, compared spec by spec.

Amazon Black Friday Week deals
Office Machines and Storage

Shelf Pins Sizes: Standard Diameters Guide for Cabinets

Shelf pins sizes come down to the pin diameter matching the hole: 5mm and 1/4 inch are the diameters the listings state, and the kits below cover each size.

Shelf Pins Sizes: Standard Diameters Guide for Cabinets

A shelf that sags in the middle or a bookcase with a peg missing from a corner comes down to a small part that has to match the hole it sits in, and shelf pins sizes are the first thing to check before buying a kit. The pin diameter has to match the hole in the cabinet side, or the pin wobbles, slips out or will not go in. This guide explains the diameters the listings state, how to measure a hole, and which kits cover each size.

OfficeKitHQ earns a commission when you buy through links on this page, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Affiliate disclosure.

Shelf pins sizes: the diameters in the listings

The listings state pin diameters of 5mm and 1/4 inch, with 6.35mm listed as the 1/4 inch size. The JIMROLA, JunLiWei and Okxiri kits list 5mm pins, while the 1/4 inch size appears in the JIMROLA bracket style and in the PRIME-LINE peg (on Amazon). The table below lines up each diameter with the hole it fits and the kits that list it.

Pin diameter Hole it fits Kits that list it Amazon
5mm 5mm holes JIMROLA, JunLiWei, Okxiri
1/4 inch (6.35mm) 1/4 inch holes JIMROLA bracket style, PRIME-LINE

The JIMROLA listing states the hole should be equal to or slightly smaller than the pin diameter, and the Okxiri listing gives the same guidance for 5mm holes. Measure the hole before ordering, and check the pin diameter on the listing against that measurement.

Measure the hole before you buy

Start with the hole, not the pin. Measure the diameter of a hole in the cabinet side with calipers, or check the diameter of a pin that already fits the cabinet. The hole should be equal to or slightly smaller than the pin diameter: the JIMROLA listing and the Okxiri listing state that fit, so a pin that drops in loose has a hole that is too large, and a pin that will not enter has a hole that is too small. Pins that screw into the cabinet side suit a different fitting; see the screw-in shelf support pins comparison for that style.

The gear

Once the hole diameter is known, the kits below cover the pin sizes the listings state, with styles for wood, glass and plastic boards.

Okxiri 124-Pc Shelf Pegs Kit

Okxiri 124-Pc Shelf Pegs Kit

Okxiri9.7/10 Office Score
i
The Office Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 124-piece kit in 5 nickel-plated styles, all with a 5mm pin diameter, for cabinets, kitchen shelves, bookcases and glass shelves.

Pros

  • 124 pieces in 5 styles, including L-shaped, dowel, flat spoon and cylindrical pins
  • All pegs share a 5mm pin diameter for 5mm shelf holes
  • Polished nickel finish, stated as rust-resistant and burr-free
  • Peg lengths from 8mm to 25mm across the styles

Cons

  • No warranty term is stated
  • Every style is a 5mm pin, so a 1/4 inch hole needs a different kit
  • Lengths for some styles are given as a 10 to 25mm range, not per style
  • 5 styles are claimed but only L-shaped, dowel, flat spoon and cylindrical pegs are named
Detailed Review

Okxiri lists a 124-piece kit in 5 styles: L-shaped support pins, dowel pins, flat spoon shelf holders and cylindrical cabinet shelf pegs with a cap, all with a 5mm pin diameter. The L-shaped and flat spoon pegs are 5mm in diameter and 8mm long, while the other pegs range from 10 to 25mm, and the listing states the pegs fit 5mm shelf holes. The listing says 5 styles but names L-shaped, dowel, flat spoon and cylindrical pegs, so one style goes unnamed in the text. The pegs are polished nickel, stated as rust-resistant and burr-free, and the listing states the hole should be equal to or slightly smaller than 5mm for a tight fit.

Who it's for: someone who wants a large kit that covers L-shaped, dowel, flat spoon and cylindrical pins in 5mm for a cabinet with 5mm holes. Who should skip it: anyone whose cabinet takes 1/4 inch pins, or who wants a warranty term in writing.

Its Office Score of 9.7/10 comes from performance 32/35, build 21/25, value 21/25, safety not scored (non-powered gear) and warranty 0/5: 74 of 90 points, placed on our 9.2 to 9.8 scale.

Key Specifications
Pack size124 pieces
Styles5
Pin diameter5mm
Pin lengths8 to 25mm

Figures as published on the retailer listing, collected 12 November 2026. Performance figures are manufacturer rated.

Safety and Warranty

What this listing states. This product does not plug in or run on a battery, so safety is not part of its score. No warranty term, so warranty scores zero. See How We Pick.

Anchor it. Anchor tall bookshelves and file cabinets to the wall with the supplied hardware or an anti-tip kit, load the lowest shelves and drawers first, and open one drawer at a time.

This is general buying information, not professional advice. Follow each product manual and local rules, and see our Safety Disclaimer.

JIMROLA 120-Pc Shelf Pins Kit

JIMROLA 120-Pc Shelf Pins Kit

JIMROLA9.6/10 Office Score
i
The Office Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 120-piece kit in 4 nickel-plated styles that covers 5mm and 1/4 inch holes, with a plastic storage box.

Pros

  • Covers 5mm and 1/4 inch holes in one kit
  • 120 pieces in 4 styles, with 48 flat spoon and 48 cylindrical pins
  • Per-style dimensions are listed for every style
  • Nickel-plated pegs with a smooth surface and no metal burrs, per the listing

Cons

  • No warranty term is stated
  • The title calls the kit 5mm (1/4 inch), but the bullets list 5mm and 6.35mm as separate sizes
  • Only 12 bracket-style supports and 12 dowel pins in the 120 pieces
  • The 1/4 inch size appears only in the bracket style
Detailed Review

JIMROLA lists a 120-piece kit in 4 styles: 48 flat spoon pegs, 48 cylindrical pins, 12 bracket-style supports and 12 dowel pins, with a plastic box. The bracket pin is 6.35mm in diameter and 8mm long, the flat spoon peg is 5mm in diameter and 10mm long, the cylindrical pin is 5mm in diameter and 16mm long, and the dowel pin is 5mm in diameter and 25mm long. The title calls the kit 5mm (1/4 inch), but the bullets list 5mm and 6.35mm as separate sizes, so the bullets are the sizes to trust. The pegs are nickel plated with a smooth surface and no metal burrs, per the listing, and the listing states the hole should be equal to or slightly smaller than the pin diameter.

Who it's for: someone who needs the 5mm and 1/4 inch sizes in one kit, with a bracket style for 1/4 inch holes and 5mm styles for the rest. Who should skip it: anyone who wants one size only, or who wants a warranty term in writing.

Its Office Score of 9.6/10 comes from performance 30/35, build 21/25, value 21/25, safety not scored (non-powered gear) and warranty 0/5: 72 of 90 points, placed on our 9.2 to 9.8 scale.

Key Specifications
Pack size120 pieces
Styles4
Pin diameters5mm and 6.35mm
Bracket pin6.35mm dia, 8mm long

Figures as published on the retailer listing, collected 12 November 2026. Performance figures are manufacturer rated.

Safety and Warranty

What this listing states. This product does not plug in or run on a battery, so safety is not part of its score. No warranty term, so warranty scores zero. See How We Pick.

Anchor it. Anchor tall bookshelves and file cabinets to the wall with the supplied hardware or an anti-tip kit, load the lowest shelves and drawers first, and open one drawer at a time.

This is general buying information, not professional advice. Follow each product manual and local rules, and see our Safety Disclaimer.

PRIME-LINE Shelf Peg 8-Pack

PRIME-LINE Shelf Peg 8-Pack

PRIME-LINE9.5/10 Office Score
i
The Office Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A clear plastic peg for standard 1/4 inch shelf holes, sold as an 8-pack with a 1-year warranty against manufacturing defects.

Pros

  • Fits standard 1/4 inch shelf support holes
  • Clear plastic blends into the furniture
  • 1-year warranty against manufacturing defects is stated
  • 8-pack suits replacing a few pegs at a time

Cons

  • 8 pegs per pack is the smallest count here
  • Plastic, while the other kits here are nickel-plated metal
  • The listing warns against exceeding the load capacity but states no figure
  • One size only: 1/4 inch pins for 1/4 inch holes
Detailed Review

Prime-Line lists a clear plastic shelf support peg for standard 1/4 inch diameter shelf support holes, sold in an 8-pack. The listing states the clear design blends into furniture while giving reliable shelf support, and it warns against exceeding the recommended load capacity without stating a figure. Goods are warranted against manufacturing defects for 1 year, per the listing.

Who it's for: someone replacing a few clear pegs in a cabinet with 1/4 inch holes who wants the pegs to blend in. Who should skip it: anyone whose cabinet takes 5mm pins, or who needs a large pack for many shelves.

Its Office Score of 9.5/10 comes from performance 28/35, build 19/25, value 18/25, safety not scored (non-powered gear) and warranty 2/5: 67 of 90 points, placed on our 9.2 to 9.8 scale.

Key Specifications
Pin diameter1/4 inch
MaterialClear plastic
Pack size8 pack
Warranty1 year

Figures as published on the retailer listing, collected 12 November 2026. Performance figures are manufacturer rated.

Safety and Warranty

What this listing states. This product does not plug in or run on a battery, so safety is not part of its score. Goods are warranted against manufacturing defects for 1 year. It does not say everything a buyer needs, such as who pays return shipping, so warranty scores 2 of 5. See How We Pick.

Anchor it. Anchor tall bookshelves and file cabinets to the wall with the supplied hardware or an anti-tip kit, load the lowest shelves and drawers first, and open one drawer at a time.

This is general buying information, not professional advice. Follow each product manual and local rules, and see our Safety Disclaimer.

JunLiWei 50-Pc Shelf Pegs

JunLiWei 50-Pc Shelf Pegs

JunLiWei9.5/10 Office Score
i
The Office Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 50-piece set of L-shaped nickel-plated iron pegs with a hole design, sized at 5mm for 5mm shelf holes.

Pros

  • L-shaped pegs with a hole design keep the board level and stable
  • Iron with nickel plating, stated as rust-resistant
  • 50 pegs with a plastic storage box
  • Installs by hand

Cons

  • No warranty term is stated
  • One style only: L-shaped pegs at 5mm
  • Pin length is not stated in the listing
Detailed Review

JunLiWei lists 50 L-shaped shelf support pegs with a hole design, in iron with nickel plating, for 5mm holes. The L-shaped pegs keep the board level and stable, per the listing, and the pegs install by hand. The spec table lists product dimensions that do not match a peg, so the bullets are the sizes to trust: a 5mm leg diameter. A plastic box is included.

Who it's for: someone fitting L-shaped pegs to a cabinet with 5mm holes who wants the hole design for a level board. Who should skip it: anyone whose cabinet takes 1/4 inch pins, or who wants more than one peg style in the box.

Its Office Score of 9.5/10 comes from performance 29/35, build 20/25, value 20/25, safety not scored (non-powered gear) and warranty 0/5: 69 of 90 points, placed on our 9.2 to 9.8 scale.

Key Specifications
Pack size50 pieces
StyleL-shaped with hole
Pin diameter5mm
MaterialIron, nickel plated

Figures as published on the retailer listing, collected 12 November 2026. Performance figures are manufacturer rated.

Safety and Warranty

What this listing states. This product does not plug in or run on a battery, so safety is not part of its score. No warranty term, so warranty scores zero. See How We Pick.

Anchor it. Anchor tall bookshelves and file cabinets to the wall with the supplied hardware or an anti-tip kit, load the lowest shelves and drawers first, and open one drawer at a time.

This is general buying information, not professional advice. Follow each product manual and local rules, and see our Safety Disclaimer.

As an Amazon Associate I earn from qualifying purchases.

FAQ

What size are standard shelf pins?

The listings state 5mm and 1/4 inch diameters, with 6.35mm listed as the 1/4 inch size. Match the pin diameter to the hole in the cabinet side before ordering.

Are 5mm and 1/4 inch shelf pins the same size?

No. The JIMROLA listing gives 6.35mm for its 1/4 inch bracket pin and 5mm for its flat spoon, cylindrical and dowel pins, so the sizes are listed separately. A 5mm pin in a 1/4 inch hole sits loose, and a 1/4 inch pin will not enter a 5mm hole.

How do I measure a shelf pin hole?

Measure the hole diameter with calipers and match it to the pin diameter on the listing. The hole should be equal to or slightly smaller than the pin, per the JIMROLA and Okxiri listings.

Do shelf pins work on glass shelves?

Yes, the JIMROLA, JunLiWei and Okxiri listings name glass boards among the uses, alongside wood and plastic boards. Check the hole diameter first, since the pin size depends on the hole, not the board.

How many pins come in a kit?

The JIMROLA kit (on Amazon) has 120 pieces in 4 styles, the Okxiri kit (on Amazon) has 124 pieces in 5 styles, the JunLiWei set has 50 pieces, and the PRIME-LINE peg comes in an 8-pack. Count the shelves to fill and match the pack size to the job.

Okxiri 124-Pc Shelf Pegs Kit
Still deciding? Our top pickOkxiri 124-Pc Shelf Pegs Kit
Check price on Amazon

More for your workspace

See every bookshelves and file cabinets guide, the heavy duty shelf pins comparison, and all office storage guides.