Staples sizes come down to the stapler you own and the thickness of the stack you want to fasten. A standard desktop stapler takes a standard staple with a short leg, while a staple gun takes a wider staple in a longer leg. This guide explains the common sizes, what each leg length handles, and which staple listings fit which stapler.
OfficeKitHQ earns a commission when you buy through links on this page, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Affiliate disclosure.
Staples sizes at a glance
The chart below lists each size with its leg length and the stack it handles.
| Staple or stapler | Size | What it handles | Amazon |
|---|---|---|---|
| Bostitch standard staples | 1/4 in leg | 28 sheets | |
| Swingline standard staples | 1/4 in leg | 25 sheets | View on Amazon |
| Arrow T50 staples | 1/4, 3/8, 1/2 in | Upholstery, insulation and repairs | |
| Bostitch Ascend stapler | 20 sheet capacity | Desktop stapling and tacking |
The standard staple boxes share a 1/4 in leg and a 5000 count, and differ in the sheet count the listing states.
Staples and staplers for every stack
The listings below cover the sizes in the chart above: standard staples for desktop staplers, a T50 kit for staple guns, and a stapler that ships with its own staples.
| # | Product | Office Score | Buy |
|---|---|---|---|
| 1 | Bostitch SBS1914CP Staples | 9.8/10 | Buy on Amazon |
| 2 | Bostitch Ascend 3-in-1 Stapler | 9.6/10 | Buy on Amazon |
| 3 | Swingline Standard Staples | 9.6/10 | Buy on Amazon |
| 4 | Arrow T50 Staple Gun Kit | 9.6/10 | Buy on Amazon |

Bostitch SBS1914CP Staples
Standard staples with a 1/4 in leg that hold 28 sheets, in a box of 5000 with 210 per strip.
Pros
- Holds 28 sheets, the largest stack stated in this group
- Chisel point drives through paper cleanly and cuts down on jams
- High carbon steel wire gives a stronger bite and fewer misforms
- 5000 staples per box with 210 per strip keeps a desk stocked
Cons
- A 1/4 in leg cannot cover fastening beyond paper stacks
- No staple remover is stated in the listing
- Steel is the only color stated
- Fits standard desktop, full strip and plier staplers only, not T50 staple guns
Detailed Review
Bostitch lists the SBS1914CP as standard staples with a 1/4 in leg length, a chisel point and high carbon steel wire, and states they hold 28 sheets at a time. Each strip loads 210 staples and the box holds 5000, and the listing states the 1/4 in leg works in nearly any standard desktop, full strip or plier stapler. The spec table gives a 4.5 by 1.6 by 0.1 in box and a 0.38 lb item weight, and states a Lifetime warranty.
Who it's for: anyone who staples reports, packets and handouts at a desk and wants a box to last. Who should skip it: anyone fastening with a T50 staple gun or working beyond paper stacks.
Its Office Score of 9.8/10 comes from performance 32/35, build 22/25, value 21/25, safety not scored (non-powered gear) and warranty 4/5: 79 of 90 points, placed on our 9.2 to 9.8 scale.
Key Specifications
| Leg length | 1/4 in |
|---|---|
| Sheets held | 28 sheets |
| Staples per box | 5000 |
| Staples per strip | 210 |
These specs mirror the retailer listing as of 13 November 2026; performance figures are stated by the brand.
Safety and Warranty
What this listing states. This product does not plug in or run on a battery, so safety is not part of its score. Lifetime. It does not say everything a buyer needs, such as who pays return shipping, so warranty scores 4 of 5. See How We Pick.
Anchor it. Anchor tall bookshelves and file cabinets to the wall with the supplied hardware or an anti-tip kit, load the lowest shelves and drawers first, and open one drawer at a time.
This is general buying information, not professional advice. Follow each product manual and local rules, and see our Safety Disclaimer.

Bostitch Ascend 3-in-1 Stapler
A 3-in-1 stapler with a 20 sheet capacity, a built-in remover and a storage compartment for spare staples.
Pros
- Built-in remover plus an extra staple remover in the pack
- Opens 180 degrees for tacking and craft use
- Storage compartment keeps extra staples close at hand
- Limited Lifetime Warranty is stated
Cons
- 20 sheet capacity covers everyday stacks only
- Color is assorted and may vary, so the shade is not a choice
- No leg length is stated for the included staples
Detailed Review
Bostitch lists the Ascend as a 3-in-1 stapler with a 20 sheet capacity, a built-in remover, an extra staple remover and a storage compartment for spare staples, and states it opens 180 degrees for tacking and craft use. The title states the value pack includes 5000 staples, while the bullets state 1,250 staples, so the count in the box is unclear from the listing. The spec table states a Limited Lifetime Warranty and model B210VP-BLU.
Who it's for: someone who wants a stapler, a remover and staple storage in a pack for everyday desk use. Who should skip it: anyone who needs a firm staple count before buying or staples stacks above 20 sheets.
Its Office Score of 9.6/10 comes from performance 28/35, build 21/25, value 19/25, safety not scored (non-powered gear) and warranty 4/5: 72 of 90 points, placed on our 9.2 to 9.8 scale.
Key Specifications
| Sheet capacity | 20 sheets |
|---|---|
| Opens | 180 degrees |
| Remover | Built-in, plus extra remover |
| Warranty | Limited Lifetime Warranty |
These specs mirror the retailer listing as of 13 November 2026; performance figures are stated by the brand.
Safety and Warranty
What this listing states. This product does not plug in or run on a battery, so safety is not part of its score. Limited Lifetime Warranty. It does not say everything a buyer needs, such as who pays return shipping, so warranty scores 4 of 5. See How We Pick.
Anchor it. Anchor tall bookshelves and file cabinets to the wall with the supplied hardware or an anti-tip kit, load the lowest shelves and drawers first, and open one drawer at a time.
This is general buying information, not professional advice. Follow each product manual and local rules, and see our Safety Disclaimer.

Swingline Standard Staples
Standard staples with a 1/4 in leg that hold 25 sheets, in a box of 5000 with 210 per strip.
Pros
- Chisel point pierces paper cleanly and is designed to prevent jams
- 15% fewer misforms than comparable staples, per the listing
- 5000 staples per box with 210 per strip
- Designed to fit most standard staplers, so refills stay simple
Cons
- Holds 25 sheets, below the 28 sheets stated for the Bostitch box
- Warranty is stated only as Limited, with no term given
- No staple remover is stated in the listing
- Silver is the only color stated
Detailed Review
Swingline lists these as standard staples for desktop staplers with a 1/4 in leg length, a chisel point and a claim of 15% fewer misforms than comparable staples. The listing states they hold 25 sheets of paper, with 210 staples per strip and 5000 per box, and that they fit most standard staplers. The spec table gives a 4.2 by 1.7 by 1.1 in box and a 0.025 lb item weight, and states a Limited warranty with no term.
Who it's for: anyone who wants a standard box of staples for a desktop stapler and values the jam-resistant chisel point. Who should skip it: anyone who needs more than 25 sheets per staple or a warranty term in writing.
Its Office Score of 9.6/10 comes from performance 30/35, build 21/25, value 21/25, safety not scored (non-powered gear) and warranty 0/5: 72 of 90 points, placed on our 9.2 to 9.8 scale.
Key Specifications
| Leg length | 1/4 in |
|---|---|
| Sheets held | 25 sheets |
| Staples per box | 5000 |
| Staples per strip | 210 |
These specs mirror the retailer listing as of 13 November 2026; performance figures are stated by the brand.
Safety and Warranty
What this listing states. This product does not plug in or run on a battery, so safety is not part of its score. No warranty term, so warranty scores zero. See How We Pick.
Anchor it. Anchor tall bookshelves and file cabinets to the wall with the supplied hardware or an anti-tip kit, load the lowest shelves and drawers first, and open one drawer at a time.
This is general buying information, not professional advice. Follow each product manual and local rules, and see our Safety Disclaimer.

Arrow T50 Staple Gun Kit
A chrome steel staple gun kit with 3750 T50 staples in 1/4, 3/8 and 1/2 in sizes for upholstery and repairs.
Pros
- 3750 T50 staples included, 1250 of each size: 1/4, 3/8 and 1/2 in
- Compatible with T50 staples from 1/4 in to 9/16 in
- Chrome steel housing with steel parts hardened in a 1,500-degree furnace
- Rear-load magazine with a jam-resistant mechanism and a staple-viewing window
Cons
- No warranty term is stated in the listing
- Built for upholstery and repairs, not for paper stacks at a desk
- Staple gun only takes T50 staples, so standard staples do not fit
- No staple remover is stated in the listing
Detailed Review
Arrow lists the T50 as a heavy duty staple gun kit with 3750 T50 staples: 1250 pieces each of 1/4, 3/8 and 1/2 in sizes. The listing states a chrome steel housing, steel parts hardened in a 1,500-degree furnace, a rear-load magazine with a jam-resistant mechanism and a staple-viewing window, and compatibility with T50 staples from 1/4 in (6 mm) to 9/16 in (14 mm). The spec table gives 7.31 by 3.4 in dimensions and a silver color.
Who it's for: anyone fastening upholstery, insulation or household repairs with a staple gun and wanting the 1/4, 3/8 and 1/2 in sizes in a kit. Who should skip it: anyone stapling paper at a desk, where a standard stapler and standard staples fit better.
Its Office Score of 9.6/10 comes from performance 29/35, build 22/25, value 20/25, safety not scored (non-powered gear) and warranty 0/5: 71 of 90 points, placed on our 9.2 to 9.8 scale.
Key Specifications
| Staple sizes | 1/4, 3/8, 1/2 in |
|---|---|
| Staples included | 3750 pieces |
| Compatible sizes | 1/4 to 9/16 in |
| Housing | Chrome steel |
These specs mirror the retailer listing as of 13 November 2026; performance figures are stated by the brand.
Safety and Warranty
What this listing states. This product does not plug in or run on a battery, so safety is not part of its score. No warranty term, so warranty scores zero. See How We Pick.
Anchor it. Anchor tall bookshelves and file cabinets to the wall with the supplied hardware or an anti-tip kit, load the lowest shelves and drawers first, and open one drawer at a time.
This is general buying information, not professional advice. Follow each product manual and local rules, and see our Safety Disclaimer.
As an Amazon Associate I earn from qualifying purchases.
How to choose the best staples sizes
Match the leg length to your stapler
Start with the stapler, not the staple. A desk stapler takes standard staples with a 1/4 in leg, and the standard boxes here list that leg length. A T50 staple gun takes T50 staples, and the Arrow kit states compatibility from 1/4 in (6 mm) to 9/16 in (14 mm). Check the size range on the stapler before ordering a box.
Match the staple to the stack
Leg length sets the stack a staple can close. The Bostitch box states 28 sheets, the Swingline box (on Amazon) states 25 sheets, and the Bostitch Ascend stapler states a 20 sheet capacity. Pick the figure that covers the thickest stack you staple in a normal week, and keep a longer T50 leg on hand for fastening beyond paper. For paper stacks, a stapler with a built-in remover handles misfires without a separate tool.
Count the box before you buy
The standard boxes hold 5000 staples with 210 per strip, so a box lasts through long stretches of desk work. The Arrow kit holds 3750 T50 staples, with 1250 of each size. The Ascend listing is unclear here: the title states 5000 staples while the bullets state 1,250, so confirm the count if it matters to you.
Check the warranty term
The Bostitch standard staples state a Lifetime warranty, and the Ascend stapler states a Limited Lifetime Warranty. The Swingline listing states only Limited, with no term, and the Arrow kit states no warranty at all. A stated term matters more for a tool you will keep, such as the Ascend stapler or the Arrow gun, than for a consumable box of staples.
FAQ
What size staples fit a standard stapler?
Standard staples with a 1/4 in leg. The Bostitch and Swingline boxes here list a 1/4 in leg and state they fit most standard desktop staplers.
How many sheets can standard staples hold?
The Bostitch box states 28 sheets and the Swingline box states 25 sheets, each with a 1/4 in leg. Thicker stacks call for a longer leg, such as the 3/8 in or 1/2 in T50 sizes in the Arrow kit.
What are T50 staples used for?
Upholstery, insulation, general repairs and crafts, per the Arrow listing. The kit includes 1/4, 3/8 and 1/2 in sizes and fits T50 staple guns with a 1/4 in to 9/16 in range.
How many staples come in a box?
The standard boxes here hold 5000 staples with 210 per strip. The Arrow kit holds 3750 T50 staples, with 1250 of each size.
More for your workspace
See every Office Machines and Storage guide, plus the best staple remover tool for paper and how to use a staple remover.









