The best metal keyboard riser is the small lift that changes how a keyboard sits on a desk, and the right lift disappears under the keys while the wrong lift slides around by midmorning. A home desk in a spare room, an apartment corner or a kitchen table leaves little room for trial and error, so the angle, the material and the grip all have to be right from the listing. This roundup compares the risers by tilt angles, material, width, anti-slip grip and pack size, using only what each listing publishes.
OfficeKitHQ earns a commission when you buy through links on this page, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Affiliate disclosure.
Quick picks
Best Overall Alrhso Keyboard Riser: Three tilt angles at 1.9, 4.1 and 5 cm, alloy build, anti-slip pads Check price on Amazon
Best Two-Pack Bewudy Keyboard Riser: Zinc alloy, 35mm and 60mm angles, 30 grams, folds flat Check price on Amazon
Best Wide Fit Beego Keyboard Stand: 17 in wide, holds full-size and compact keyboards, no assembly Check price on Amazon
Portable Set Notoke Keyboard Riser Set: 4-piece set in black and silver with 2 angles Check price on Amazon
Metal Mesh Stand Simple Trending Monitor Riser: Metal mesh riser, 32 in, for a monitor stand setup Check price on Amazon
Our desk picks
| # | Product | Office Score | Buy |
|---|---|---|---|
| 1 | Alrhso Keyboard Riser | 9.6/10 | Buy on Amazon |
| 2 | Bewudy Keyboard Riser | 9.6/10 | Buy on Amazon |
| 3 | Beego Keyboard Stand | 9.5/10 | Buy on Amazon |
| 4 | Notoke 4-Piece Riser Set | 9.5/10 | Buy on Amazon |
| 5 | Simple Trending Dual Mesh | 9.5/10 | Buy on Amazon |

Alrhso Keyboard Riser
An alloy riser with three tilt angles at 1.9 cm, 4.1 cm and 5 cm, anti-slip silicone and a folding design that packs to 3 by 6 cm.
Pros
- Three tilt angles at 1.9 cm, 4.1 cm and 5 cm, the most here
- Alloy build with anti-slip silicone on the surface
- Folds to 3 by 6 cm for a notebook bag or backpack
- 2 pcs in the pack, one foot for each side of the keyboard
Cons
- No keyboard width or weight limit is stated
- Warranty description reads "use only", not a term
- No angle between 1.9 cm and 4.1 cm is offered
Detailed Review
Alrhso lists a 2-piece alloy keyboard riser with three tilt angles at 1.9 cm, 4.1 cm and 5 cm, anti-slip silicone on the surface and anti-slip pads. The listing states the mini stand folds to 3 by 6 cm, or 1.18 by 2.36 in, and fits keyboards, laptops, mobile phones and tablets. One mismatch to note: the spec table lists 5.91 by 4.13 by 0.39 in, which does not match the 3 by 6 cm in the bullets, so the bullets are the figure to trust. The warranty description reads "use only", which states no term.
Who it's for: someone who wants three tilt choices on an alloy riser that folds into a bag. Who should skip it: anyone who needs a stated width, a weight limit or a warranty term.
Its Office Score of 9.6/10 comes from performance 32/35, build 21/25, value 21/25, safety 5/10 and warranty 0/5: 79 of 100 points, placed on our 9.2 to 9.8 scale.
Key Specifications
| Tilt angles | 1.9 cm, 4.1 cm and 5 cm |
|---|---|
| Size | 3 by 6 cm, 1.18 by 2.36 in |
| Pack | 2 pcs |
| Material | Alloy |
Figures as published on the retailer listing, collected 11 November 2026. Performance figures are manufacturer rated.
Safety and Warranty
What this listing states. Anti-slip silicone on the surface and anti-slip pads are stated, so safety scores 5 of 10. No warranty term, so warranty scores zero. See How We Pick.
Fit the desk first. Check the stated size against your desk depth and keyboard tray, and charge or pair as the manual describes. No keyboard, mouse or wrist rest prevents or treats injury.
This is general buying information, not professional advice. Follow each product manual and local rules, and see our Safety Disclaimer.

Bewudy Keyboard Riser
A zinc alloy 2-piece riser with two tilt angles at 35mm and 60mm, a folding design and self-adhesive feet.
Pros
- Two tilt angles, 35mm and 60mm, in the pack
- Zinc alloy build with an open design for airflow
- Listing states 30 grams and a fully folding design
- 2 pcs in the pack, one foot for each side of the keyboard
Cons
- No tilt angle between 35mm and 60mm is offered
- No warranty term is stated
- Listed for laptops, phones and tablets as well as keyboards, so the fit is general
Detailed Review
Bewudy lists a 2-piece portable keyboard riser in zinc alloy with two tilt angles at 35mm and 60mm, self-adhesive feet and a folding design. The bullets state the stand weighs 30 grams and suits most laptops and desktop computer keyboards, and the maker lists the zinc alloy as a thermal pad with an open design for airflow. One mismatch to note: the spec table lists 0.21 pounds, which does not match the 30 grams in the bullets, so the bullets are the figure to trust. No warranty term is stated.
Who it's for: someone who wants a light folding pair of feet with two tilt choices for travel. Who should skip it: anyone who wants a stated warranty term or a fixed angle.
Its Office Score of 9.6/10 comes from performance 30/35, build 21/25, value 21/25, safety 5/10 and warranty 0/5: 77 of 100 points, placed on our 9.2 to 9.8 scale.
Key Specifications
| Tilt angles | 35mm and 60mm |
|---|---|
| Item weight | 30 grams |
| Pack | 2 pcs |
| Material | Zinc alloy |
Figures as published on the retailer listing, collected 11 November 2026. Performance figures are manufacturer rated.
Safety and Warranty
What this listing states. Self-adhesive feet are stated, so safety scores 5 of 10. No warranty term, so warranty scores zero. See How We Pick.
Fit the desk first. Check the stated size against your desk depth and keyboard tray, and charge or pair as the manual describes. No keyboard, mouse or wrist rest prevents or treats injury.
This is general buying information, not professional advice. Follow each product manual and local rules, and see our Safety Disclaimer.

Beego Keyboard Stand
A 17 in wide black acrylic keyboard stand with a molded silicone strip, rubber pads and a low front stopper, with no assembly.
Pros
- 17 in wide, holds full-size and compact keyboards
- Molded silicone strip and rubber pads hold it in place
- Low front blocks on two sides stay out of the way while typing
- No assembly is needed
Cons
- Thick acrylic, not metal, in a metal riser roundup
- One fixed tilt angle; no angle adjustment is stated
- No warranty term is stated
- Sold as 1 pc, so another board needs another stand
Detailed Review
Beego lists a black acrylic keyboard stand, 17 in wide, with a molded silicone strip on the bottom back and rubber pads under the front lips, plus a low front stopper on two sides. The spec table lists 17.0 by 5.7 by 1.3 in and 0.75 lb, and the listing states no assembly is needed. The material is the point to note: the listing states thick acrylic, not metal, so it sits in this roundup on width and grip rather than on metal build. No warranty term is stated.
Who it's for: someone with a full-size keyboard who wants a wide, stable tray with no assembly. Who should skip it: anyone who wants a metal build or an adjustable tilt angle.
Its Office Score of 9.5/10 comes from performance 28/35, build 19/25, value 20/25, safety 7/10 and warranty 0/5: 74 of 100 points, placed on our 9.2 to 9.8 scale.
Key Specifications
| Width | 17 in |
|---|---|
| Dimensions | 17.0 by 5.7 by 1.3 in |
| Item weight | 0.75 lb |
| Material | Thick acrylic |
Figures as published on the retailer listing, collected 11 November 2026. Performance figures are manufacturer rated.
Safety and Warranty
What this listing states. Molded silicone strip and rubber pads hold the stand in place, so safety scores 7 of 10. No warranty term, so warranty scores zero. See How We Pick.
Fit the desk first. Check the stated size against your desk depth and keyboard tray, and charge or pair as the manual describes. No keyboard, mouse or wrist rest prevents or treats injury.
This is general buying information, not professional advice. Follow each product manual and local rules, and see our Safety Disclaimer.

Notoke 4-Piece Riser Set
A 4-piece set of foldable risers in black and silver with 2 angle settings, self-adhesive feet and a 7 mm folded thickness.
Pros
- 2 black and 2 silver risers suit 2 workstations or a backup set
- Folds to 7 mm, or 0.28 in, for a laptop bag or sleeve
- 2 angle settings adjust the tilt
- Self-adhesive foldable feet grip desk surfaces
Cons
- No width, depth or item weight is stated
- No height figure is stated for either angle setting
- No load figure is stated
Detailed Review
Notoke lists a 4-piece set with 2 black and 2 silver foldable risers, 2 angle settings and self-adhesive foldable feet. Each riser folds to 7 mm, or 0.28 in, and the listing names most laptops, keyboards and tablets as fits. The spec table states no warranty, and no dimensions or item weight are stated.
Who it's for: someone who wants a 2-color folding set for travel or another workstation. Who should skip it: anyone who wants a written warranty term or stated dimensions.
Its Office Score of 9.5/10 comes from performance 28/35, build 20/25, value 20/25, safety 7/10 and warranty 0/5: 75 of 100 points, placed on our 9.2 to 9.8 scale.
Key Specifications
| Pieces | 4 |
|---|---|
| Folded thickness | 7 mm (0.28 in) |
| Angle settings | 2 |
| Colors | Black, silver |
Figures as published on the retailer listing, collected 11 November 2026. Performance figures are manufacturer rated.
Safety and Warranty
What this listing states. Self-adhesive foldable feet for grip are stated, so safety scores 7 of 10. No warranty term, so warranty scores zero. See How We Pick.
Match the mount. Check your screen's VESA pattern, size and weight against the stated range, and check that your desk thickness and edge suit a clamp or grommet mount before you drill or clamp.
This is general buying information, not professional advice. Follow each product manual and local rules, and see our Safety Disclaimer.

Simple Trending Dual Mesh
A 32-inch metal mesh dual riser rated for 100 lbs with a 2-tier deck and an included 32 by 10 inch mouse pad, suited to ultrawide and dual-screen desks.
Pros
- 32-inch width with a 100-pound load capacity for wide or dual setups
- Metal mesh deck with ventilation holes and non-slip suction cups
- 2-tier layout with a 30.5 by 10 inch bottom tier for keyboards and consoles
- Includes a 32 by 10 inch mouse pad for full desk coverage
Cons
- Mesh deck may show dust more than a solid wood shelf
- No cable management channel is stated
- No warranty term is stated
Detailed Review
Simple Trending lists a dual monitor stand riser with a metal mesh platform, steel legs and a 100-pound load capacity. The title and bullets give 32 by 10 by 7 inches with a 2-tier layout, a 30.5 by 10 inch bottom tier, non-slip suction cups and a 32 by 10 inch mouse pad, while the spec table also lists 20 by 10 by 5.8 inches, which contradicts the title; the title and bullets win. The spec table gives a 3.16 kg item weight and a powder-coated metal build.
Who it's for: ultrawide and dual-monitor users who want the widest deck here with ventilation. Who should skip it: anyone who needs the exact 32-inch footprint confirmed, given the conflicting dimension line.
Its Office Score of 9.5/10 comes from performance 30/35, build 21/25, value 21/25, safety 2/10 and warranty 0/5: 74 of 100 points, placed on our 9.2 to 9.8 scale.
Key Specifications
| Width | 32 in |
|---|---|
| Load capacity | 100 lbs |
| Levels | 2 |
| Item weight | 3.16 kg |
Figures as published on the retailer listing, collected 18 October 2026. Performance figures are manufacturer rated.
Safety and Warranty
What this listing states. Non-slip suction cups stated, so safety scores 2 of 10. No warranty term, so warranty scores zero. See How We Pick.
Match the mount. Check your screen's VESA pattern, size and weight against the stated range, and check that your desk thickness and edge suit a clamp or grommet mount before you drill or clamp.
This is general buying information, not professional advice. Follow each product manual and local rules, and see our Safety Disclaimer.
As an Amazon Associate I earn from qualifying purchases.
More picks to compare
Mjeppludh Keyboard Riser 6-PieceA 6-piece set in pink, black and white for travel desksCheck on Amazon
Specs compared
| Keyboard Riser | Office Score | Tilt angles | Material | Size | Pack | Warranty | Amazon |
|---|---|---|---|---|---|---|---|
| Alrhso Keyboard Riser | 9.6/10 | 1.9 cm, 4.1 cm, 5 cm | Alloy | 3 by 6 cm | 2 pcs | Not stated | View on Amazon |
| Bewudy Keyboard Riser | 9.6/10 | 35mm, 60mm | Zinc alloy | Not stated | 2 pcs | Not stated | View on Amazon |
| Beego Keyboard Stand | 9.5/10 | Fixed tilt | Thick acrylic | 17 in wide | 1 pc | Not stated | View on Amazon |
| Notoke Keyboard Riser Set | 9.5/10 | 2 angles | Not stated | Not stated | 4 pieces | Not stated | |
| Simple Trending Monitor Riser | 9.5/10 | Not stated | Metal mesh | 32 in | Not stated | Not stated |
All numbers are the manufacturer’s stated specs, not measured in an office, pulled on 11 November 2026. None of the five states a warranty term; three state anti-slip grip.
How to choose the best metal keyboard riser
Start with the tilt angles
Tilt angle decides how high the back of the keyboard sits. The Alrhso lists three angles at 1.9 cm, 4.1 cm and 5 cm, the Bewudy lists two at 35mm and 60mm, and the Notoke title states 2 angles without figures. The Beego gives a fixed tilt with no adjustment stated, so it suits a desk where one angle is enough. A riser with more angles gives more room to change the feel across the day; see the non-slip keyboard riser picks for more grip-first options.
Metal, acrylic or plastic: read the material line
The material line matters more here than on most desk gear, because a riser carries the keyboard all day. The Bewudy lists zinc alloy and the Alrhso lists alloy, while the Beego lists thick acrylic even though its title calls it a keyboard stand for a metal roundup. The Simple Trending lists metal mesh, and the Mjeppludh in the more picks list is hard plastic. If the metal build is the point, the alloy pair at the top of this roundup is the safer read; the clear keyboard riser picks show what acrylic looks like when it is the stated material.
Measure the width against the keyboard
Width decides whether a riser fits under the board or sticks out past it. The Beego measures 17 in wide and its listing states it holds full-size and compact keyboards, so it is the pick for a wide board. The Alrhso folds to 3 by 6 cm and the Bewudy folds flat, so both suit a compact board and a bag. Check the board against the stated width before ordering, and see mechanical keyboard types for how board sizes differ.
Grip and pack size
Anti-slip grip is what keeps a riser from walking across the desk. The Beego lists a molded silicone strip and rubber pads, the Alrhso lists anti-slip silicone and anti-slip pads, and the Bewudy lists self-adhesive feet. Pack size runs from 2 pcs on the Bewudy and Alrhso to a 4-piece Notoke set and a 6-piece Mjeppludh set in the more picks list, so a spare pair is already covered for another board. A black wrist rest pairs with any of these risers for a fuller desk setup.
| Keyboard Riser | Tilt angles | Material | Pack |
|---|---|---|---|
| Alrhso Keyboard Riser | 1.9 cm, 4.1 cm, 5 cm | Alloy | 2 pcs |
| Bewudy Keyboard Riser | 35mm, 60mm | Zinc alloy | 2 pcs |
| Beego Keyboard Stand | Fixed tilt | Thick acrylic | 1 pc |
| Notoke Keyboard Riser Set | 2 angles | Not stated | 4 pieces |
| Simple Trending Monitor Riser | Not stated | Metal mesh | Not stated |
Figures as stated in each listing. Tilt angles are the heights the maker lists for the raised end.
Setup Notes
- Measure the keyboard against the 17 in Beego before ordering a wide riser for a compact board.
- Check the desk surface before relying on self-adhesive feet; the Bewudy lists them, the Alrhso and Beego list pads and strips instead.
- Place a foot under each side of the keyboard; the 2-piece packs ship as a pair.
- Leave room for the cable to run under the raised keyboard so it does not snag when the board moves.
- Fold the Bewudy and Alrhso flat for travel; both list a folding design.
FAQ
Which metal keyboard riser has the most tilt angles?
The Alrhso lists three tilt angles at 1.9 cm, 4.1 cm and 5 cm. The Bewudy lists two at 35mm and 60mm, and the Notoke title states 2 angles without figures.
Is the Beego stand metal?
No. The Beego listing states thick acrylic, not metal, even though it appears in this metal riser roundup. Its 17 in width and non-slip strip are the reasons it stays in the group.
What size keyboard fits the Beego stand?
The Beego measures 17 in wide and its listing states it holds full-size and compact keyboards. Its spec table lists 17.0 by 5.7 by 1.3 in.
Do any of these risers state a warranty?
None of the five states a warranty term. The Alrhso warranty description reads “use only”, which is not a term, and the other listings state no warranty at all.
Which riser folds flat for travel?
The Bewudy and the Alrhso both list a folding design. The Bewudy lists 30 grams and the Alrhso folds to 3 by 6 cm, so both fit a notebook bag or backpack.
Score breakdown
The Office Score weighs performance (tilt options, fit for common keyboards and stated grip), build (material and construction as listed), value for the stated specs, safety and warranty. For a keyboard riser, safety means anti-slip grip and a stable hold on the desk; the Bewudy, Alrhso and Beego state anti-slip features, the other two list only a title. None of the five states a warranty term, so no warranty points are given in this group. How we pick explains the weights.
| Product | Office Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| Alrhso Keyboard Riser | 9.6 | 32 | 21 | 21 | 5 | 0 |
| Bewudy Keyboard Riser | 9.6 | 30 | 21 | 21 | 5 | 0 |
| Beego Keyboard Stand | 9.5 | 28 | 19 | 20 | 7 | 0 |
We fit point totals onto a 9.2 low and 9.8 high in a straight line. One item can outscore another only by earning more points.
More for your workspace
See every keyboard guide and all computer peripherals guides. Also see our best extended mouse pad. Also see our keyboard switches types. Also see our mouse pad size.
More picks: black wrist rest, extended mouse pad, clear keyboard riser.





