Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›

Home office gear, compared spec by spec.

Amazon Black Friday Week deals
Audio, Power and Connectivity

Ethernet Switch Setup: Connect Your Home Office in Steps

Ethernet switch setup in plain steps: pick a switch with enough ports, connect it to the router, plug in each device, and check the link lights.

Ethernet Switch Setup: Connect Your Home Office in Steps

The video call freezes, the printer drops off the network, and the console lags while every device crowds the router. Ethernet switch setup solves that jam: plug an unmanaged switch into the router, connect each device to a port on the switch, and the wired network grows without software or configuration.

OfficeKitHQ earns a commission when you buy through links on this page, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Affiliate disclosure.

The quick answer

An unmanaged switch needs no setup screen and no login: connect a cable from the router to the switch, connect each device to a port on the switch, plug the switch power adapter into an outlet, and the link lights show the connection is live. The listings in this guide state plug-and-play setup with no software installation or configuration, auto-negotiation that senses the link speed, and fanless design for quiet operation. Pick a switch with enough ports for every device plus the router connection, and use the port counts below as a guide.

Ethernet switch setup step by step

Work through the steps in order. The whole job is cabling and placement: no account, no app and no settings page.

Step 1: Count the ports you need

Count every wired device, then add the router connection, and choose a switch with at least that many ports. The listings here come in 5-port, 8-port, 16-port and 24-port sizes: a 5-port switch suits a laptop, a printer, a console and a spare cable run, while a 24-port switch suits a room full of gear. The TP-Link LS1005G (on Amazon) listing states 1 uplink (input) port and 4 output ports, so on that switch the router takes the uplink port and 4 devices share the output ports.

Step 2: Place the switch near the router

Set the switch on the desk or mount it on the wall close to the router, with room for the cables to reach without a sharp bend. Several listings state desktop or wall-mount placement, and the NETGEAR GS324 (on Amazon) listing adds rack-mount placement. The fanless design on these switches keeps operation quiet, so a switch can sit on the desk beside the monitor without adding fan noise. Keep the power adapter within reach of an outlet.

Step 3: Connect the switch to the router

Run an Ethernet cable from a LAN port on the router to a port on the switch. On the TP-Link LS1005G that cable goes into the uplink (input) port, leaving the 4 output ports for devices. Auto-negotiation on the switch senses the link speed, and Auto MDI/MDIX means either end of the cable works, so no crossover cable is needed. The NETGEAR listings state the ports work with existing Cat5e or Cat6 Ethernet cables.

Step 4: Plug in your devices

Connect each device to its own port on the switch with an Ethernet cable: laptop, printer, console, streaming box, or an extra switch in another room. The ports auto-negotiate, so a device that runs at 100 Mbps and a device that runs at 1000 Mbps can share the same switch, each at its own speed. The TP-Link TL-SG105S-M2 (on Amazon) listing states 5 ports at 2.5 Gbps with up to 25 Gbps of switching capacity, and auto-negotiation between 100Mb, 1G and 2.5G speeds.

Step 5: Power on and check the lights

Plug the power adapter into an outlet and watch the link lights: a lit port means the cable and the device are connected, and a dark port means the cable is loose or the device is off. IEEE 802.3X flow control on the listed switches keeps data transfer steady, and IEEE 802.3az Energy Efficient Ethernet trims power use when a port is idle. If a port stays dark, reseat the cable at the switch end and the device end, try a different port, and try a different cable before suspecting the switch.

How many ports do you need

Ports Listed switches Speed
5 TP-Link LS1005G and TP-Link TL-SG105 and NETGEAR GS305 10/100/1000 Mbps
5 TP-Link TL-SG105S-M2 2.5 Gbps
8 TP-Link TL-SG108 and NETGEAR GS308 10/100/1000 Mbps
16 TP-Link TL-SG116 10/100/1000 Mbps
24 NETGEAR GS324 and TP-Link TL-SG1024S 10/100/1000 Mbps

All of the switches above state plug-and-play setup with no software installation or configuration, fanless quiet operation, and auto-negotiation. The TP-Link TL-SG105 and TL-SG116 listings add port-based 802.1p/DSCP QoS and IGMP Snooping to prioritize video and voice traffic, and the TP-Link TL-SG116 (on Amazon) listing states an operating temperature of 0 degrees Celsius to 40 degrees Celsius (32 degrees Fahrenheit to 104 degrees Fahrenheit).

What about warranty and support

The TP-Link LS1005G listing states a 2 year manufacturer warranty, the NETGEAR GS305 and GS308 listings state a limited 3-year hardware warranty, and the TP-Link TL-SG108 (on Amazon) listing states limited lifetime protection. The TP-Link TL-SG105 listing states a 3-year warranty with free technical support from 6am to 6pm PST Monday to Fridays. Keep the box and the receipt until the switch has run for a while, so a warranty claim stays simple.

FAQ

Do I need to install software to set up an unmanaged switch?

No. The listings for the TP-Link LS1005G, NETGEAR GS305 and NETGEAR GS324 all state plug-and-play setup with no software installation or configuration needed. Connect the cables, plug in the power adapter, and the switch starts passing traffic.

Which port connects to the router?

Any port works on an unmanaged switch, but the TP-Link LS1005G listing names 1 uplink (input) port and 4 output ports, so use the uplink port for the router cable and the output ports for devices. On switches that name no uplink port, any free port takes the router cable.

Can I use existing Ethernet cables?

Yes, if they are Cat5e or Cat6. The NETGEAR listings state the ports work with existing Cat5e or Cat6 Ethernet cables, and auto-negotiation senses the link speed for each connected device.

How many devices can a 5-port switch connect?

On the TP-Link LS1005G, 4 devices: the listing states 1 uplink (input) port and 4 output ports, so the router takes the uplink port and 4 devices plug into the output ports. A switch with 8-port, 16-port or 24-port sizes leaves more room for extra devices.

Why is my switch silent?

The listings state a fanless design, so there is no fan to spin or hum. The TP-Link LS1005G, NETGEAR GS305 and TP-Link TL-SG108 listings all describe fanless quiet operation, which suits a desk in a quiet room.

More for your workspace

See the ethernet switch setup guides in the connectivity category, the surge protector and cable management guides, the docking station and USB hub guides and the best small power strips.