Two laptops sit on one desk, one keyboard and one mouse serve them both, and the cable swap at the start of every workday is the part nobody misses, which is where kvm switch setup earns its place. A KVM switch lets two computers share one set of keyboard, mouse and monitors: connect each computer to the switch, then the switch to the shared screens and peripherals. This guide walks through the setup step by step, using the figures the reference listings state for ports, resolutions and power.
OfficeKitHQ earns a commission when you buy through links on this page, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Affiliate disclosure.
The quick answer: kvm switch setup
Connect each computer to the KVM switch with video cables and a USB cable, connect the monitors, keyboard and mouse to the switch, connect the power adapter, then switch between computers with the front button or the desktop controller. For a dual monitor setup, each computer needs two video outputs and one USB connection to the switch. Check that the switch, the cables and the monitors all support the resolution you want: the listings state figures up to 4K at 60Hz and 8K at 60Hz. A KVM switch differs from a docking station with USB 3.0, which serves one computer rather than two.
What you need before you start
| Part | What to check | Figure in the listings |
|---|---|---|
| Computers | Video outputs on each computer | 2 HDMI or 2 DisplayPort |
| Monitors | Video inputs on each monitor | 1 HDMI or 1 DisplayPort |
| USB cable | One cable per computer | USB 3.0 |
| Power | External adapter | 12V |
| Cables for a full dual monitor setup | HDMI cables to prepare | 6 |
The listings cover switches for two computers sharing 1, 2 or 3 monitors: the UGREEN HDMI switch shares 1 monitor, the ATLAHET, JCYMELE, UGREEN DisplayPort and TRENDnet switches (on Amazon) share 2 monitors, and the CMSTEDCD switch (on Amazon) shares 3 monitors. Count the monitors first, then the video outputs on each computer, since the monitor count decides how many outputs each computer needs.
Step 1: Count the ports on each computer
Start at the back of each computer. A dual monitor switch needs two video outputs on each computer: two HDMI ports for an HDMI switch, or two DisplayPort outputs for a DisplayPort switch. The ATLAHET listing states that each computer needs at least 2 HDMI ports and each monitor needs at least 1 HDMI port, and the JCYMELE listing states that each computer needs two available DP output ports and one USB-A connection to the switch. If a laptop has only USB-C ports, the UGREEN listing says to use a USB-C to USB-A OTG adapter with the included USB-A cable. Count the ports before you buy the switch, since a computer with one video output cannot feed two monitors through a dual monitor switch.
Step 2: Connect the monitors
Connect each monitor to the video outputs on the switch, then set the display mode: extended mode shows different content on each screen, and duplicate or mirror mode shows the same screen on both. The CMSTEDCD listing supports resolutions up to 8K at 60Hz and 4K at 120Hz, the JCYMELE listing supports up to 8K at 60Hz or 4K at 144Hz, and the UGREEN DisplayPort listing supports up to 8K at 60Hz with backward compatibility to 4K at 240Hz, 144Hz, 120Hz, 60Hz and 30Hz. The resolution you get depends on the computer, the monitors and the cables all supporting the same figure. Direct DisplayPort connections are recommended in the JCYMELE listing, and adapter cables are not recommended there. The HDMI cable specs guide covers cable versions, bandwidth and resolution.
Step 3: Connect the keyboard, mouse and USB devices
Connect the keyboard and mouse to the USB ports on the switch, then add the other USB devices. The listings share four USB 3.0 ports between the computers at speeds up to 5Gbps, backward compatible with USB 2.0 and USB 1.1 devices. The UGREEN HDMI listing notes that USB 2.0 runs at 480Mbps while USB 3.0 runs at 5Gbps. High-power USB devices need the external power supply: the ATLAHET listing says use of high power USB devices requires the included 12V power supply, and the UGREEN HDMI listing says to ensure USB-C charging to the power source when connecting high-power equipment. Plug the keyboard and mouse in first, then add printers, scanners and drives one at a time.
Step 4: Connect power and switch
Connect the 12V power adapter, then switch between computers with the front-panel button or the wired desktop controller. The UGREEN DisplayPort listing states that the switch needs a 12V/2A external power supply, and the CMSTEDCD listing states that the 12V power adapter provides stronger drive for the switch. The listings differ on hotkeys: the TRENDnet listing states hot key command shortcuts, while the ATLAHET, JCYMELE and UGREEN listings state that keyboard hotkey switching is not supported. If the switch has a desktop controller, place the controller within reach and keep the switch out of the way: the JCYMELE listing notes that the extension cable lets you place the controller within easy reach while the switch stays out of sight.
Check the display mode and the EDID setting
After the first switch, check that each monitor shows the right content in the right mode. The Hearvo listing states adaptive EDID technology that optimizes display settings for connected monitors, while the UGREEN DisplayPort listing states that it does not support EDID emulation. If a monitor flickers or shows the wrong resolution after a switch, check the EDID note in the listing for your switch, then check the cables: the UGREEN DisplayPort listing says to use a standard 8K DP 1.4 cable shorter than 2 meters, and the UGREEN HDMI listing says the HDMI cable input and output should be within 6.5FT for 8K at 60Hz.
When the screen stays blank
Work through the connections in order, starting with the power adapter, since the listings state that high-power USB devices and stable switching need the 12V supply. Next, check that each computer has two video outputs connected to the switch, since a dual monitor switch needs two video cables and one USB cable per computer. Then check that the cables support the resolution: the CMSTEDCD listing notes that the source, the monitor and the cable must all support 8K. Then check the display mode, since the UGREEN DisplayPort listing notes that the two monitors can only output the video source from one computer at a time. If one monitor works and the other stays blank, swap the two monitor cables at the switch to see whether the blank screen follows the cable.
FAQ
How many monitors can a KVM switch share?
The listings in this guide share 1, 2 or 3 monitors between two computers. The UGREEN HDMI switch shares 1 monitor, the ATLAHET, JCYMELE, UGREEN DisplayPort and TRENDnet switches share 2 monitors, and the CMSTEDCD switch shares 3 monitors.
Does a KVM switch need a power adapter?
The listings include a 12V power adapter, and the ATLAHET and UGREEN listings state that high-power USB devices need the external power supply. The CMSTEDCD listing states that the 12V power adapter provides stronger drive for the switch. Connect the adapter even if the switch seems to work without it.
Can you switch computers with a keyboard shortcut?
It depends on the listing. The TRENDnet listing states hot key command shortcuts, while the ATLAHET, JCYMELE and UGREEN listings state that keyboard hotkey switching is not supported. If hotkeys matter, check the listing for hot key support before you buy, and use the front button or the desktop controller on switches that do not list it.
What cables does a dual monitor KVM switch need?
Each computer needs two video cables and one USB cable connected to the switch. The UGREEN DisplayPort listing states that each computer must connect 2 DP cables and 1 USB-A cable, and the Hearvo listing says to prepare 6 HDMI 2.0 cables for a full setup. DisplayPort video cables are not included with the JCYMELE and UGREEN DisplayPort listings, so check the package list in the listing you buy.
More for your workspace
See the best docking stations with USB 3.0, the dual monitor arm setup, the HDMI cable specs and the docking stations and USB hubs guides.





