Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›

Home office gear, compared spec by spec.

Amazon Black Friday Week deals
Headsets

Headset Setup: How to Connect a USB Headset for Calls

Headset setup, step by step: plug in a USB or 3.5mm headset, pick it in the call app, place the boom mic, and check mute and volume before the call starts.

Headset Setup: How to Connect a USB Headset for Calls

The next call starts soon, the laptop sits on a small desk, and headset setup means getting the headset out of its box, plugging it in, and checking the mic before the call starts. A headset that is plugged in but not picked in the call app stays silent, and a mic that sits too far from the mouth stays quiet, so the order below matters: connect, choose, place, and check. The steps use USB headsets made for calls on Teams, Zoom and Skype.

OfficeKitHQ earns a commission when you buy through links on this page, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Affiliate disclosure.

The quick answer

Headset setup takes a few minutes: plug the headset into a USB-A port, a USB-C port or a 3.5mm jack, wait for the computer to see it, then pick the headset as the speaker and the mic in the call app. Place the boom mic near the mouth, learn the mute control, and make a short call with a colleague to confirm both sides hear each other. Most USB headsets covered here need no drivers, so the plug itself does the work.

Step 1: Plug the headset in

Start with the plug. A USB headset goes into a USB-A port or a USB-C port; the AOC headset (on Amazon) lists both USB-A and USB-C, and the Jabra Evolve 20 (on Amazon) lists USB-A or USB-C for instant use. A headset with a 3.5mm plug goes into the 3.5mm jack on a computer, phone or tablet; the NUBWO HW02 (on Amazon) lists a 3.5mm connection for direct plug-in to a phone or tablet, with detachable USB inline controls for PC and Mac calls. Headset types explains wired, wireless and USB models, and headset plug types covers 3.5mm plugs and adapters.

Plug-and-play headsets need no drivers. The Sennheiser PC 8 USB states no drivers are needed, and the Wantek UC600 (on Amazon) states the same, so the computer should show the headset as an audio device as soon as the plug is in. A USB-C headset suits a laptop that has USB-C ports and no USB-A port.

Step 2: Choose the headset in the call app

Open the call app and open its audio settings. Pick the headset as the speaker and pick the headset mic as the microphone, then leave those choices in place so the app does not fall back to the laptop speakers. The Yealink UH34 (on Amazon) is Teams certified and lists Teams, Zoom and Skype for Business, while the Jabra Evolve 20 is certified for Avaya and Cisco.

If the other side hears nothing, look at the app choice again before touching the headset. A headset that is plugged in but not chosen in the app sends no sound to the ear cups and takes no sound from the mic.

Step 3: Place the boom mic and check mute

Bend the boom so the mic sits near the mouth and points at it. The AOC headset has a 90-degree adjustable boom mic, the EPOS SC 60 has a bendable boom arm, and the Logitech H540 has a rotating boom that tucks into the headband when the mic is not in use. Noise cancelling mics on these headsets cut background noise, so a mic that points away from the mouth picks up room noise instead of voice.

Learn the mute control before the call starts. The NUBWO HW02 has inline controls for volume and mic mute, with an indicator light that shows when the microphone is muted. The Logitech H540 has on-ear controls and a light indicator on the cord, and the Yealink UH34 has a visual busylight that shows when the wearer does not want to be disturbed. On the AOC headset, lift the mic boom 90 degrees to mute, and rotate the right earcup for volume control.

Step 4: Set volume and run a call check

Set the volume with the control on the headset. The NUBWO HW02 and the Wantek UC600 use inline controls in the cord, the Logitech H540 uses on-ear controls, and the Yealink UH34 uses a button on the headset shell.

Sound quality comes from the drivers the maker lists. The AOC headset lists 40mm drivers, the Jabra Evolve 20 lists 28mm speakers, and the EPOS SC 60 lists an audio sensitivity of 113 decibels. Make a short call with a colleague and ask whether the voice sounds clear on the other end. If the voice sounds thin or distant, move the boom mic closer and check the mute light again.

Headset setup for phones and tablets

A phone or a tablet takes the same steps, with the plug doing more of the work. The NUBWO HW02 plugs its 3.5mm connector straight into a phone or tablet, and the AOC headset lists USB-C mobile devices among the devices it works with, so a phone with a USB-C port takes the USB plug. The Jabra Evolve 20 plugs into a laptop through USB-A or USB-C, and the same USB-C plug fits a tablet with a USB-C port. A headset with an aux cable is the pick when the device has a 3.5mm jack and no USB-C port.

Pick the headset in the phone call app the same way as on a computer, and keep the inline controls where they can be reached during the call.

Fit, weight and cable layout

A headset that fits stays put through a long call. The NUBWO HW02 weighs 60 grams, the AOC headset has a 6.17-oz frame with soft protein-memory ear cushions, and the Yealink UH34 has an adjustable metal headband with soft leather ear pads. The Wantek UC600 has an adjustable headband and a flexible mic boom, so the fit can be set once and left alone. Headset sizes covers how to choose the right fit.

Give the cable a clear path. The AOC headset has a 6-ft cable, so route it from the headset to the computer without pulling it tight across the desk, and keep the inline controls off the desk edge where they can be knocked.

FAQ

Does a USB headset need drivers to set up?

No. The Sennheiser PC 8 USB states that no drivers are needed, and the Wantek UC600 states the same, so plug the USB connector in and pick the headset in the call app.

How do you mute the mic on a USB headset?

Use the mute control on the headset: inline controls on the NUBWO HW02, on-ear controls on the Logitech H540, or lift the AOC mic boom 90 degrees to mute. The indicator light shows when the microphone is muted.

Can a USB headset be used with a phone?

Yes, when the plug matches the phone. The NUBWO HW02 plugs its 3.5mm connector into a phone or tablet, and the AOC headset lists USB-C mobile devices, so a phone with a USB-C port takes the USB plug.

What should you check when the other side cannot hear you?

Check the mute light, move the boom mic near the mouth, and open the call app to confirm the headset mic is chosen. A mic that is muted, a boom that points away, or an app that still uses the laptop mic all leave the other side hearing nothing.

More for your workspace

See every computer peripherals guide and the best headset covers, the best headset hooks for desks, the best headset cases and the best headset stands.