A chair that wobbles after a move, a gas cylinder that sticks and a base that will not fit through the door all point to the same job: how to disassemble office chair hardware, bolt by bolt. Most fasteners under the seat, on the backrest and around the tilt mechanism are hex socket bolts, so a hex key set is the tool that sets the pace. The steps below take the chair apart in order, then show the hex key sets with stated figures to compare.
OfficeKitHQ earns a commission when you buy through links on this page, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Affiliate disclosure.
The quick answer
Start with the hex keys, since every step below turns a hex socket bolt. The ELEAD set covers metric sizes from 0.7 to 10 mm and SAE sizes from 0.028 in to 3/8 in, the Amazon Basics set lists 36 keys in SAE and metric sizes, the MULWARK set lists 17 pieces in a pack of 2, and the toolant set lists 14 sizes in a folding handle. Work from the top down: seat, backrest and armrests, then gas cylinder and base, then casters. Keep the bolts from each part together, since the parts go back in the reverse order.
How to disassemble office chair step by step
Step 1: Turn the chair over and find the bolts
Set the chair upside down on a soft surface so the seat faces down and the base faces up. Look under the seat for the bolts that hold the seat plate to the gas cylinder, and at the back of the chair for the bolts that hold the backrest and the armrests. Match a hex key to each bolt before turning anything: the ELEAD set lists metric sizes from 0.7 to 10 mm and SAE sizes from 0.028 in to 3/8 in. A key that slips in the socket is the wrong size, so try the next size up or down.
Step 2: Remove the seat from the base
Turn the bolts under the seat plate counter-clockwise and lift the seat off the gas cylinder. The seat plate and the tilt mechanism come off with the seat, so set them aside with their bolts. The Amazon Basics set lists 36 keys with long and short arm lengths, and the long arm reaches bolts set deep under the seat plate.
Step 3: Take off the backrest and armrests
Turn the bolts at the back of the seat and at the base of each armrest, then lift the backrest and the armrests away. The MULWARK set lists a flexible angle design for work in tight spaces, which suits the bolts behind the backrest frame. Keep the armrest bolts apart from the seat bolts, since the parts differ in length.
Step 4: Separate the gas cylinder and the base
Hold the base steady and pull the gas cylinder out of the center of the base. The cylinder sits in a tapered socket, so it may need a firm pull to come free. The toolant set folds into a compact handle with 14 sizes, so it stays in a pocket between pulls.
Step 5: Pull the casters and sort the parts
Pull each caster straight out of the base, then lay the parts out in the order they came off: seat, backrest, armrests, gas cylinder, base and casters. The ELEAD set lists 15 long reach keys and 15 high leverage short keys with a torque handle, so the long keys reach the recessed bolts and the short keys turn the ones in the open. Store each bolt with its part, so reassembly starts from the last part removed.
The gear: four hex key sets for the job
The sets below handle the bolts in the steps above: seat plate, backrest and armrest bolts first, then the base bolts and the caster work, so the ranking runs from the widest stated size range to the smallest folding set.
| # | Product | Office Score | Buy |
|---|---|---|---|
| 1 | ELEAD 31-Piece Hex Key Set | 9.7/10 | Buy on Amazon |
| 2 | Amazon Basics 36-Piece Set | 9.6/10 | Buy on Amazon |
| 3 | MULWARK 17-Piece Folding Set | 9.6/10 | Buy on Amazon |
| 4 | toolant 14-Piece Folding Set | 9.5/10 | Buy on Amazon |

ELEAD 31-Piece Hex Key Set
The widest stated size range here, with a torque handle for the seat plate bolts and the backrest bolts.
Pros
- Metric sizes from 0.7 to 10 mm and SAE sizes from 0.028 in to 3/8 in, the widest stated range here
- Torque handle adds force for stubborn bolts under the seat plate
- 15 long reach keys and 15 high leverage short keys cover recessed and open bolts
- High-visibility size markings and a sturdy carrying case
Cons
- No warranty term is stated
- 31 pieces is more than the job needs if the chair uses one size
- No stated item weight, so the case weight cannot be checked
- No stated hardness rating, unlike the toolant set at HRC 58 to 62
Detailed Review
ELEAD lists a 31-piece hex key set with metric sizes from 0.7 to 10 mm and SAE sizes from 0.028 in to 3/8 in, in heat-treated steel with a black-oxide finish. The set lists 15 long reach keys and 15 high leverage short keys, a torque handle, and high-visibility size markings with a sturdy carrying case. The long keys reach the recessed bolts under the seat plate and the short keys turn the backrest and armrest bolts. No warranty term is stated, so warranty scores zero.
Who it's for: someone taking apart a chair with mixed metric and SAE bolts who wants the widest stated size range. Who should skip it: anyone who only needs one size and does not want a 31-piece set.
Its Office Score of 9.7/10 comes from performance 32/35, build 22/25, value 21/25, safety not scored (non-powered gear) and warranty 0/5: 75 of 90 points, placed on our 9.2 to 9.8 scale.
Key Specifications
| Piece count | 31 |
|---|---|
| Metric range | 0.7 to 10 mm |
| SAE range | 0.028 in to 3/8 in |
| Torque handle | Included |
Figures as published on the retailer listing, collected 10 November 2026. Performance figures are manufacturer rated.
Safety and Warranty
What this listing states. This product does not plug in or run on a battery, so safety is not part of its score. No warranty term, so warranty scores zero. See How We Pick.
Fit and capacity. Check the stated seat height range against your desk height and the stated weight capacity against the heaviest user. Tighten bolts after the first week. Adjustments are comfort features, not treatment for pain; ask a clinician about any condition.
This is general buying information, not professional advice. Follow each product manual and local rules, and see our Safety Disclaimer.

Amazon Basics 36-Piece Set
The largest piece count here, with long and short arms for the recessed bolts under the seat plate.
Pros
- 36 keys is the largest piece count here
- Long and short arm lengths reach recessed and open bolts
- Chrome vanadium steel with a black oxide finish for rust resistance
- 2 hinged cases with dedicated slots and clear size markings
Cons
- No warranty term is stated
- No stated size range, only SAE and metric, so the exact sizes cannot be checked
- No torque handle, unlike the ELEAD set
Detailed Review
Amazon Basics lists a 36-piece Allen wrench set in SAE and metric sizes, with long and short arm lengths, in chrome vanadium steel with a black oxide finish. The listing states 2 hinged cases with dedicated slots and clear size markings, and product dimensions of 7.40 by 3.39 by 1.65 in. The long arm reaches the recessed bolts under the seat plate. The spec table lists NumberOfItems as 1 while the title and bullets list 36 pieces, so trust the title and bullets over the spec table. No warranty term is stated, so warranty scores zero.
Who it's for: someone who wants the most keys in two organized cases. Who should skip it: anyone who needs the exact size range stated, or a torque handle.
Its Office Score of 9.6/10 comes from performance 30/35, build 21/25, value 21/25, safety not scored (non-powered gear) and warranty 0/5: 72 of 90 points, placed on our 9.2 to 9.8 scale.
Key Specifications
| Piece count | 36 |
|---|---|
| Sizes | SAE and metric |
| Material | Chrome vanadium steel |
| Product dimensions | 7.40 by 3.39 by 1.65 in |
Figures as published on the retailer listing, collected 10 November 2026. Performance figures are manufacturer rated.
Safety and Warranty
What this listing states. This product does not plug in or run on a battery, so safety is not part of its score. No warranty term, so warranty scores zero. See How We Pick.
Fit and capacity. Check the stated seat height range against your desk height and the stated weight capacity against the heaviest user. Tighten bolts after the first week. Adjustments are comfort features, not treatment for pain; ask a clinician about any condition.
This is general buying information, not professional advice. Follow each product manual and local rules, and see our Safety Disclaimer.

MULWARK 17-Piece Folding Set
Two folding sets with a flexible angle for the tight bolts behind the backrest and around the armrests.
Pros
- Pack of 2 gives a spare folding set for the workshop and the room
- Metric sizes from 1.5 to 8 mm and SAE sizes from 5/64 to 1/4 in are fully listed
- Flexible angle design suits bolts in tight spaces behind the backrest
- Ergonomic handle gives leverage and torque on stubborn bolts
Cons
- No warranty term is stated
- Metric range stops at 8 mm, below the ELEAD range of 0.7 to 10 mm
- No stated hardness rating, unlike the toolant set at HRC 58 to 62
- Folding design means only one size is open at a time
Detailed Review
MULWARK lists a 17-piece folding Allen wrench set in a pack of 2, with metric sizes from 1.5 to 8 mm and SAE sizes from 5/64 to 1/4 in, in high-grade alloy steel. The listing states a flexible angle design for tight spaces, an ergonomic handle for leverage and torque, and a design less prone to stripping. The flexible angle suits the tight bolts behind the backrest and around the armrests, and the second set covers the seat plate bolts. No warranty term is stated, so warranty scores zero.
Who it's for: someone who wants two folding sets with the size range fully listed. Who should skip it: anyone who needs metric sizes above 8 mm or a stated hardness rating.
Its Office Score of 9.6/10 comes from performance 28/35, build 20/25, value 20/25, safety not scored (non-powered gear) and warranty 0/5: 68 of 90 points, placed on our 9.2 to 9.8 scale.
Key Specifications
| Piece count | 17 per set |
|---|---|
| Pack | 2 sets |
| Metric sizes | 1.5 to 8 mm |
| SAE sizes | 5/64 to 1/4 in |
Figures as published on the retailer listing, collected 10 November 2026. Performance figures are manufacturer rated.
Safety and Warranty
What this listing states. This product does not plug in or run on a battery, so safety is not part of its score. No warranty term, so warranty scores zero. See How We Pick.
Fit and capacity. Check the stated seat height range against your desk height and the stated weight capacity against the heaviest user. Tighten bolts after the first week. Adjustments are comfort features, not treatment for pain; ask a clinician about any condition.
This is general buying information, not professional advice. Follow each product manual and local rules, and see our Safety Disclaimer.

toolant 14-Piece Folding Set
A compact folding set with the only stated hardness rating here, for the seat and backrest bolts.
Pros
- 14 metric and SAE sizes in one folding handle
- CR-V steel with an HRC rating of 58 to 62, the only stated hardness here
- Square-cut hex-key ends for a full-depth fit, per the listing
- Compact folding design and a light stated weight of 0.51 lb
Cons
- No warranty term is stated
- Metric sizes stop at 6 mm, the narrowest stated range here
- Brand field lists Kraftek while the title names toolant, so check the listing before ordering
- Bottle opener feature has nothing to do with chair bolts
Detailed Review
toolant lists a 14-piece folding Allen wrench set with 7 SAE sizes from 5/64 to 1/4 in and 7 metric sizes from 2 to 6 mm, in CR-V steel with an HRC rating of 58 to 62. The listing states square-cut hex-key ends for a secure, full-depth fit and a compact folding design, with an item weight of 0.51 lb. The set covers the seat and backrest bolts. The brand field lists Kraftek while the title names toolant, so check the listing before ordering. No warranty term is stated, so warranty scores zero.
Who it's for: someone who wants a pocket folding set with a stated hardness rating. Who should skip it: anyone who needs metric sizes above 6 mm or a wider stated range.
Its Office Score of 9.5/10 comes from performance 26/35, build 19/25, value 19/25, safety not scored (non-powered gear) and warranty 0/5: 64 of 90 points, placed on our 9.2 to 9.8 scale.
Key Specifications
| Piece count | 14 |
|---|---|
| Metric sizes | 2 to 6 mm |
| SAE sizes | 5/64 to 1/4 in |
| Material | CR-V steel, HRC 58 to 62 |
Figures as published on the retailer listing, collected 10 November 2026. Performance figures are manufacturer rated.
Safety and Warranty
What this listing states. This product does not plug in or run on a battery, so safety is not part of its score. No warranty term, so warranty scores zero. See How We Pick.
Fit and capacity. Check the stated seat height range against your desk height and the stated weight capacity against the heaviest user. Tighten bolts after the first week. Adjustments are comfort features, not treatment for pain; ask a clinician about any condition.
This is general buying information, not professional advice. Follow each product manual and local rules, and see our Safety Disclaimer.
As an Amazon Associate I earn from qualifying purchases.
FAQ
What tools are needed to disassemble an office chair?
A hex key set. The ELEAD set lists metric sizes from 0.7 to 10 mm and SAE sizes from 0.028 in to 3/8 in, the Amazon Basics set lists 36 keys, and the toolant set lists 14 sizes in a folding handle.
Which hex key size fits office chair bolts?
It depends on the chair. The listings state metric sizes from 0.7 to 10 mm and SAE sizes from 0.028 in to 3/8 in across the four sets, so match the key to the bolt before turning it.
How is the gas cylinder removed from the base?
Take the seat off first, then hold the base steady and pull the cylinder out of the center socket. The cylinder sits in a tapered socket, so it may need a firm pull to come free.
Can the chair be put back together after taking it apart?
Yes, if the parts and bolts are kept in order. Lay the parts out in the order they came off and store each bolt with its part, then work back through the steps in reverse.
More for your workspace
See the best office chairs for working from home, the best standing desks for working from home and the best under-desk footrests.
More picks: office chairs for working from home, standing desks for working from home, under-desk footrests and office chairs.









