The tools pile up on the desk and the wall beside it stays empty, and how to mount a pegboard is the question that turns that blank wall into storage. A pegboard hangs from spacers that hold it off the wall, with screws through the spacers into a wood stud or a hollow or concrete wall, and hooks and bins hang from the holes. The steps below cover the wall, the spacers and the board, in that order.
OfficeKitHQ earns a commission when you buy through links on this page, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Affiliate disclosure.
The quick answer
Mount the board on spacers so the hooks have room behind it, drive screws through the spacers into a wood stud or a hollow or concrete wall, and hang hooks and bins from the holes. The mounting kit in this guide holds the board off the wall, and the hook kits fill it. Measure the board against the wall space first, and check the board thickness against the kit: the mounting kit here fits boards up to 1/4 inch thick.
How to mount a pegboard, step by step
Step 1: Pick the wall and the board
Choose a wall with room for the board and the tools that will hang from it, and check the board thickness before ordering a kit. The mounting kit in this guide fits boards up to 1/4 inch thick, and its spacers fit 1/8-inch and 1/4-inch boards. Match the hooks to the board as well: the INCLY and ELEAD hook (on Amazon) kits fit 1/8 inch and 1/4 inch boards, while the Colorstorm hooks (on Amazon) fit 1/4 inch only, so check the hole size before ordering hooks.
Step 2: Hold the board off the wall with spacers
Hooks need room behind the board, so spacers hold it off the wall. The mounting kit here includes 24 spacers that stay on the screws while mounting, with 24 screws and 24 washers. Drive the screws through the spacers into a wood stud or a hollow or concrete wall. A screwdriver and level are needed, and a power screwdriver is recommended but not included.
Step 3: Hang hooks and bins
With the board mounted, hang hooks through the holes and set bins on them. Peg locks hold the hooks in place: the INCLY kit includes 109 peg locks. Rubber caps on the ELEAD hooks protect items and keep hooks from slipping or falling. Arrange hooks in a compact style to save space, and keep the tools used most often within easy reach.
The gear for the job
The mounting kit below handles the spacers and screws from Step 2, and the hook kits handle the hanging in Step 3.
| # | Product | Office Score | Buy |
|---|---|---|---|
| 1 | Hotop Pegboard Mounting Kit | 9.7/10 | Buy on Amazon |
| 2 | INCLY 278-Piece Pegboard Kit | 9.6/10 | Buy on Amazon |
| 3 | ELEAD 55-Piece Pegboard Hooks | 9.6/10 | Buy on Amazon |
| 4 | Colorstorm 100-Piece Peg Hooks | 9.5/10 | Buy on Amazon |

Hotop Pegboard Mounting Kit
The mounting kit for the job: 24 sets of screws, washers and rubber spacers that hold a pegboard off the wall on wood stud, hollow and concrete walls.
Pros
- 24 sets include 24 screws, 24 washers and 24 spacers: 72 pieces in all
- Spacers stay on the screws while mounting, so the board sits off the wall
- Steel screws and washers with rubber spacers, stated as sturdy and not easy to break or deform
- Fits 1/8-inch and 1/4-inch boards on wood stud, hollow and concrete walls
Cons
- No warranty term is stated
- Screwdriver and level are needed; power screwdriver is not included
- Board thickness must not exceed 1/4 inch
- Mounts the board only: no hooks or bins are included
Detailed Review
Hotop lists a 72-piece mounting kit: 24 screws, 24 washers and 24 rubber spacers, with steel screws and washers stated as sturdy and not easy to break or deform. The kit fits 1/8-inch and 1/4-inch boards up to 1/4 inch thick, and the spacers stay on the screws while mounting. The listing states the kit mounts a pegboard on wood stud, hollow and concrete walls, and that a screwdriver and level are needed, with a power screwdriver recommended but not included.
Who it's for: anyone mounting a pegboard on a wall and needing the spacers, screws and washers in one kit. Who should skip it: anyone who already has mounting hardware and only needs hooks or bins.
Its Office Score of 9.7/10 comes from performance 32/35, build 22/25, value 21/25, safety 8/10 and warranty 0/5: 83 of 100 points, placed on our 9.2 to 9.8 scale.
Key Specifications
| Piece count | 72 pieces |
|---|---|
| Sets | 24 sets |
| Fits | 1/8-inch and 1/4-inch boards |
| Item weight | 0.29 lb |
Figures as published on the retailer listing, collected 13 November 2026. Performance figures are manufacturer rated.
Safety and Warranty
What this listing states. Steel screws and washers with rubber spacers are stated; spacers stay on the screws while mounting, so safety scores 8 of 10. No warranty term, so warranty scores zero. See How We Pick.
Anchor it. Anchor tall bookshelves and file cabinets to the wall with the supplied hardware or an anti-tip kit, load the lowest shelves and drawers first, and open one drawer at a time.
This is general buying information, not professional advice. Follow each product manual and local rules, and see our Safety Disclaimer.

INCLY 278-Piece Pegboard Kit
A 278-piece hook and bin kit that fills the board after it is mounted, with peg locks to hold the hooks in place.
Pros
- 278 pieces across 16 hook types, including 12 bins
- 109 peg locks hold hooks in place on the board
- Fits 1/8 inch pegboard with 1 inch spacing and 1/4 inch pegboard with peg locks
- Hardened steel hangers with chrome plating and hard plastic bins
Cons
- No warranty term is stated
- Bins are plastic while the hangers are steel
- Straight hook count is not stated, only described as multiple
- Fits 1/4 inch pegboard only with peg locks in place
Detailed Review
INCLY lists a 278-piece kit with 16 hook types, 12 bins and 109 peg locks. The hangers are hardened steel with a corrosion-resistant chrome plating finish, and the bins are high-density hard plastic. The hooks fit 1/8 inch pegboard with 1 inch spacing and 1/4 inch pegboard with peg locks, and the listing states the kit suits metal and non-metal pegboards. The listing gives counts for curved and angled hooks and describes the straight hooks only as multiple, with no count stated.
Who it's for: someone filling a mounted board with hooks and bins in one order. Who should skip it: anyone who needs mounting hardware, which this kit does not include.
Its Office Score of 9.6/10 comes from performance 30/35, build 21/25, value 21/25, safety 7/10 and warranty 0/5: 79 of 100 points, placed on our 9.2 to 9.8 scale.
Key Specifications
| Piece count | 278 pieces |
|---|---|
| Bins | 12 bins |
| Peg locks | 109 peg locks |
| Fits | 1/8 or 1/4 inch pegboard |
Figures as published on the retailer listing, collected 13 November 2026. Performance figures are manufacturer rated.
Safety and Warranty
What this listing states. Peg locks hold hooks in place; hardened steel hangers with chrome plating are stated, so safety scores 7 of 10. No warranty term, so warranty scores zero. See How We Pick.
Anchor it. Anchor tall bookshelves and file cabinets to the wall with the supplied hardware or an anti-tip kit, load the lowest shelves and drawers first, and open one drawer at a time.
This is general buying information, not professional advice. Follow each product manual and local rules, and see our Safety Disclaimer.

ELEAD 55-Piece Pegboard Hooks
A 55-piece set of 2 inch steel hooks with rubber caps for hanging tools on a mounted pegboard.
Pros
- 55 pieces of 2 inch hooks in one set
- Heavy-duty hardened steel with a galvanized finish
- Rubber caps protect items and keep hooks from slipping or falling
- Fits 1/4-inch and 1/8-inch pegboards
Cons
- No warranty term is stated
- Hooks only: no bins, locks or mounting hardware are included
- Only 2 inch hooks are listed
- Peg locks are not stated in the listing
Detailed Review
ELEAD lists a 55-piece set of 2 inch hooks in heavy-duty hardened steel with a galvanized finish. The hooks fit 1/4-inch and 1/8-inch pegboards, and rubber caps protect items and keep the hooks from slipping or falling. The listing states the set suits garages, workshops and kitchens, and that the hooks hang hand tools, extension cords, kitchen accessories and baskets.
Who it's for: someone who wants one size of steel hook for a mounted board. Who should skip it: anyone who needs bins, peg locks or mounting hardware.
Its Office Score of 9.6/10 comes from performance 29/35, build 21/25, value 20/25, safety 7/10 and warranty 0/5: 77 of 100 points, placed on our 9.2 to 9.8 scale.
Key Specifications
| Piece count | 55 pieces |
|---|---|
| Hook length | 2 inch |
| Material | Hardened steel, galvanized |
| Fits | 1/4-inch and 1/8-inch pegboards |
Figures as published on the retailer listing, collected 13 November 2026. Performance figures are manufacturer rated.
Safety and Warranty
What this listing states. Rubber caps protect items and keep hooks from slipping or falling, per the listing, so safety scores 7 of 10. No warranty term, so warranty scores zero. See How We Pick.
Anchor it. Anchor tall bookshelves and file cabinets to the wall with the supplied hardware or an anti-tip kit, load the lowest shelves and drawers first, and open one drawer at a time.
This is general buying information, not professional advice. Follow each product manual and local rules, and see our Safety Disclaimer.

Colorstorm 100-Piece Peg Hooks
A 100-piece set of black J hooks with rounded safety tips for a 1/4 inch pegboard.
Pros
- 100 pieces in one pack
- Rounded safety tips are stated
- No split barbs that damage peg holes, per the listing
- Fits 1/4 inch pegboard holes
Cons
- No warranty term is stated
- Fits 1/4 inch pegboard only: no 1/8 inch fit is stated
- No mounting hardware, bins or peg locks are listed
- J hooks only; no curved or angled hooks are listed
Detailed Review
Colorstorm lists a 100-piece pack of black J hooks that fit 1/4 inch pegboard holes. The hooks have rounded safety tips and no split barbs that damage peg holes, and the listing states a smooth system to protect pegboards. The hooks are easy to install and easy to move, per the listing.
Who it's for: someone filling a 1/4 inch board with simple J hooks. Who should skip it: anyone with a 1/8 inch board or anyone who needs mounting hardware.
Its Office Score of 9.5/10 comes from performance 28/35, build 20/25, value 20/25, safety 7/10 and warranty 0/5: 75 of 100 points, placed on our 9.2 to 9.8 scale.
Key Specifications
| Piece count | 100 pieces |
|---|---|
| Fits | 1/4 inch pegboard |
| Color | Black |
| Dimensions | 4.0 x 4.0 x 1.0 in |
Figures as published on the retailer listing, collected 13 November 2026. Performance figures are manufacturer rated.
Safety and Warranty
What this listing states. Rounded safety tips are stated, so safety scores 7 of 10. No warranty term, so warranty scores zero. See How We Pick.
Anchor it. Anchor tall bookshelves and file cabinets to the wall with the supplied hardware or an anti-tip kit, load the lowest shelves and drawers first, and open one drawer at a time.
This is general buying information, not professional advice. Follow each product manual and local rules, and see our Safety Disclaimer.
As an Amazon Associate I earn from qualifying purchases.
How to choose pegboard mounting gear
Match the kit to the board thickness
Check the board thickness against the kit before ordering. The Hotop mounting kit fits boards up to 1/4 inch thick, and the INCLY and ELEAD hooks fit 1/8 inch and 1/4 inch boards. The Colorstorm hooks fit 1/4 inch only, so a 1/8 inch board needs a different hook kit.
Count the hooks before you order
Count the hooks and bins the board needs, then match the count to a kit. The INCLY kit holds 278 pieces with 12 bins, the ELEAD set holds 55 pieces, and the Colorstorm pack holds 100 pieces. The Hotop kit holds 72 pieces, but those are screws, washers and spacers, not hooks. For hook shapes and sizes, see Types of Pegboard Hooks: Styles, Sizes and Uses.
Check what the kit leaves out
A hook kit does not mount the board, and a mounting kit holds no hooks. The Hotop kit mounts the board only, while the INCLY, ELEAD and Colorstorm kits only add hooks and bins to a mounted board. Order the mounting kit and a hook kit together when the board is bare. For boards that suit a desk wall, see Best Metal Pegboard (2026): 5 Boards Compared.
FAQ
Do I need spacers to mount a pegboard?
Yes. Hooks need room behind the board, and spacers hold the board off the wall so hooks can pass through the holes. The mounting kit here includes 24 spacers that stay on the screws while mounting.
What size pegboard do the hooks fit?
The INCLY and ELEAD hooks fit 1/8 inch and 1/4 inch pegboards, while the Colorstorm hooks fit 1/4 inch only. Check the hole size on the board before ordering hooks.
Can I mount a pegboard on a concrete wall?
The mounting kit here states it mounts a pegboard on wood stud, hollow and concrete walls. The kit includes steel screws and washers with rubber spacers, and the spacers stay on the screws while mounting.
How many pieces come in a hook kit?
The kits here hold 278 pieces, 55 pieces and 100 pieces. The INCLY kit holds 278 pieces with 12 bins and 109 peg locks, the ELEAD set holds 55 pieces of 2 inch hooks, and the Colorstorm pack holds 100 pieces of J hooks.
More for your workspace
See every Office Machines and Storage guide and the types of pegboard hooks guide.
More picks: metal pegboards, can holders for pegboards and small office storage ideas.









