Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›

Home office gear, compared spec by spec.

Amazon Black Friday Week deals
Audio, Power and Connectivity

How to Print Using a USB Cable: A Step-by-Step Guide

How to print using a USB cable: match the cable to the printer port, plug it in, add the printer on the computer and print, with lengths from 6 ft to 25 ft.

How to Print Using a USB Cable: A Step-by-Step Guide

A printer that sits silent while the deadline looms is a familiar sight at a home desk. How to print using a USB cable is simple once the right cable is in hand: match the cable to the printer port, plug it in, add the printer on the computer and print. The steps below walk through each part, with cable lengths and speeds as the makers list them.

OfficeKitHQ earns a commission when you buy through links on this page, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Affiliate disclosure.

How to print using a USB cable: the quick answer

Plug the USB-B end into the printer and the other end into the computer, then add the printer on the computer and print a page. Most USB printer cables need no driver: the computer sees the printer as soon as the cable is seated. If the printer stays silent, check the cable ends, the port and the printer queue before blaming the cable.

Cable lengths and speeds the makers list

Printer cables come in lengths from a short desk run to a cross-room reach, and most run at USB 2.0 speed. The table shows the lengths and speeds the makers list.

Cable Length Speed Notes
UGREEN USB-C to USB-B 6.6 ft 480 Mbps Nylon braided, for USB-C computers
Amazon Basics USB-A to USB-B 10 ft 480 Mbps Gold-plated connectors
Amazon Basics USB-A to USB-B 16 ft 480 Mbps Gold-plated connectors, 1 year warranty
Ruaeoda USB-A to USB-B 10 ft 480 Mbps Nylon braided, rated for 15,000 bends
FXAVA USB-A to USB-B 20 ft 480 Mbps Nylon braided, rated for 25,000+ bends, 3-year warranty
NC XQIN USB-A to USB-B 25 ft 480 Mbps Gold-plated connectors
Spofit USB-A to USB-B 10-pack 6 ft 480 Mbps Pack of 10 cables
sweguard USB-A to USB-B 10 ft 480 Mbps 18 months warranty

Step 1: Pick the cable that fits each end

A printer cable has a USB-B end for the printer and a host end for the computer. Most printers take a square USB-B port, while the computer end is USB-A on most desktops and laptops, or USB-C on newer machines such as a Surface Book 2. Check the printer port first: a USB-B cable will not fit a printer that takes a different port, and a USB-C cable will not fit a computer with USB-A ports only.

Match the length to the desk run. A 6 ft cable suits a printer beside the computer, a 10 ft cable reaches across a desk, and a 20 ft or 25 ft cable crosses a room. The UGREEN cable runs 6.6 ft and suits a USB-C computer, while the FXAVA cable (on Amazon) runs 20 ft and the NC XQIN cable (on Amazon) runs 25 ft. Measure the run before ordering, and leave slack for the cable to bend without pulling on the ports. A USB printer cable types guide explains each connector shape, and the best USB printer cable guide lines up the cables by length and build.

Look at the build as well as the length. The UGREEN, Ruaeoda, FXAVA, sweguard and UorMe cables use a nylon braided jacket, and the Amazon Basics cables use gold-plated connectors for a clean signal. A braided jacket resists tangles behind a desk, and molded strain relief at each end keeps the cable from fraying where it bends.

Step 2: Plug the cable in and add the printer

Plug the USB-B end into the printer port and the other end into a USB port on the computer. The cable seats with a firm push; a loose end is the usual cause of a silent printer, so check that each end is fully home before moving on. If the printer has a power switch, switch the printer on and wait for it to settle before printing.

Most cables are plug and play, with no driver to install. The makers list plug and play for the UGREEN, Ruaeoda, FXAVA and UorMe cables, and the computer adds the printer once the cable is seated. Open the printer settings on the computer, add the printer if it does not appear on its own, and set it as the printer to use. A can a wireless printer be wired guide covers the same steps for a printer that also offers Wi-Fi.

Step 3: Print and check the result

Print a page from any document and watch for the printer to wake. A short document prints first, then a longer one, so a jam or a missed page shows up early. If the page comes out clean, the cable and the printer are working together and the setup is done.

If nothing prints, work through the chain in order. Check that each cable end is seated, try another USB port on the computer, and check that the printer is on and has paper. Then check the printer queue on the computer for a stuck job, clear it, and print again. A cable that works on one port and not another points to the port, not the cable.

A cable gives a steadier link than Wi-Fi. The UGREEN and FXAVA makers note that a cable gives a more stable link than Wi-Fi, with no dropouts while printing, and the cable runs at 480 Mbps for USB 2.0 devices. The same cables stay backward compatible with USB 1.1 at 12 Mbps and USB 1.0 at 1.5 Mbps, so an older printer still connects through the same cable.

When the cable is not the problem

Long cables and tight bends wear a cable out over time. The Ruaeoda cable (on Amazon) is rated for over 15,000 bends and the FXAVA cable for over 25,000+ bends, while the UGREEN cable is rated for 3000+ bends, so a cable that lives behind a desk and rarely moves lasts longer than one that is plugged and unplugged each day. Route the cable with slack, keep it away from chair wheels and heavy desk legs, and replace it when the jacket frays or the ends loosen.

Warranties differ between makers. The FXAVA cable carries a 3-year warranty with lifetime technical support, the sweguard cable (on Amazon) carries 18 months warranty, and the Amazon Basics 16 ft cable carries 1 year warranty. Keep the order details, since a warranty claim needs the purchase record.

Check that the cable is a data cable, not a charge-only cable. A charge-only cable fits the same ports but carries no data, so the printer never appears on the computer. A are all USB-C cables data cables guide explains how to tell them apart before ordering.

FAQ

What cable do I need to print with a USB cable?

A USB printer cable with a USB-B end for the printer and a USB-A or USB-C end for the computer. The makers list lengths from 6 ft to 25 ft, so measure the desk run and pick a cable that reaches with slack.

Does a USB printer cable need a driver?

No, in most cases. The makers list plug and play for the UGREEN, Ruaeoda, FXAVA and UorMe cables, with no driver to install, and the computer adds the printer once the cable is seated.

How long can a USB printer cable be?

The makers list lengths from 6 ft to 25 ft. A 6 ft cable suits a printer beside the computer, a 10 ft cable reaches across a desk, and a 20 ft or 25 ft cable crosses a room.

Is a USB cable steadier than Wi-Fi for printing?

Yes, according to the makers. The UGREEN and FXAVA makers note that a cable gives a more stable link than Wi-Fi, with no dropouts while printing, and the cable runs at 480 Mbps for USB 2.0 devices.

More for your workspace

See the best USB printer cables, the USB printer cable types, the can a wireless printer be wired guide and the best small desktop printers with USB.