A print job stalls right before a morning call, the laptop sits across the room from the printer, and the Wi-Fi signal drops at the worst moment. A cable on the desk ends that dance: can a wireless printer be wired? Yes. A wireless printer can be wired with a USB cable, and the wired link carries the print job straight from the computer to the printer without touching the wireless network.
OfficeKitHQ earns a commission when you buy through links on this page, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Affiliate disclosure.
Can a wireless printer be wired? Yes, with a USB cable
Most wireless printers have a USB-B port on the back. Plug a USB-A to USB-B cable into the computer and the printer, or a USB-C to USB-B cable when the computer has USB-C ports only. The computer recognizes the printer over the cable, and print jobs travel at USB 2.0 speeds up to 480 Mbps. Wi-Fi stays available for other devices, and the wired link keeps printing when the wireless signal drops.
What cable fits your printer
The printer side is almost always USB-B, so the choice is the computer side. Laptops and desktops with a rectangular USB-A port take a USB-A to USB-B cable, the common printer cable. Newer laptops with USB-C ports only take a USB-C to USB-B cable, such as the UGREEN cable at 6.6 ft. USB 2.0 runs up to 480 Mbps, and the same cables work with older USB 1.1 gear at 12 Mbps and USB 1.0 gear at 1.5 Mbps. Match the plug shapes before ordering, and measure the run from the computer to the printer so the cable reaches with slack to spare. See the USB printer cable types guide for the full range of plug shapes.
| Cable | Lengths | Computer side |
|---|---|---|
| USB-A to USB-B | 6 ft, 10 ft, 16 ft, 20 ft, 25 ft | USB-A port |
| USB-C to USB-B | 6.6 ft | USB-C port |
USB printer cables run from 6 ft to 25 ft, and a cable that barely reaches pulls at the ports when the printer or the laptop moves. Pick a length that covers the run with slack, and route it where chair wheels and feet will not catch it. Spofit sells a 10-pack of 6 ft cables, and BRENDAZ sells a 10-pack of 10 ft cables for desks with more than a printer to connect.
Step 1: Find the USB-B port on the printer
Look at the back of the printer for the USB-B port, a small port with a squarish shape beside the power inlet. The USB-B end goes into the printer, and the USB-A or USB-C end goes into the computer. When the printer has no USB-B port, it cannot take a wired USB connection, and the wireless route stays the only path.
Step 2: Connect the cable
Plug the USB-B end into the printer and the other end into the computer, then switch the printer on when it is off. The connection needs no driver install for many of these cables: the FXAVA, UorMe, BRENDAZ and NC XQIN cables all state plug and play with no driver required. Keep the cable clear of the printer paper path and the laptop vents so nothing tugs it loose mid-job.
Step 3: Add the printer on the computer
Once the cable is in, the computer should show the printer as a connected device. Open the printer settings, add a printer, and pick the USB connection when the computer offers a choice between USB and wireless. Print a short document to confirm the link works, and set the printer as the default when the desk uses it most.
When a wired connection helps
A wired link carries the print job over copper instead of air, so it holds up where Wi-Fi drops or crawls. The UGREEN cable states a more stable transfer than Wi-Fi, and the FXAVA cable (on Amazon) calls out unreliable Wi-Fi connections that drop. A desk with the printer beside the computer is the natural fit: the cable stays short, the job goes through, and the printer stays usable when the network goes down for other reasons.
Cable length and routing
Measure the run before ordering, and leave slack for the printer and the laptop to shift on the desk. Short runs suit 6 ft and 6.6 ft cables, while a printer across the room needs a 20 ft or 25 ft cable such as the FXAVA at 20 ft or the NC XQIN at 25 ft. Braided jackets handle tight bends behind a desk: the Ruaeoda cable (on Amazon) lists over 15,000 bends, and the FXAVA cable lists over 25,000 bends. Route the cable along the desk edge or under a cable cover so chair wheels never roll over it.
What about USB-C and adapters
Laptops with USB-C ports only need a USB-C to USB-B cable, and the UGREEN cable at 6.6 ft covers that case with USB 2.0 speeds up to 480 Mbps. When the laptop has USB-C and the printer cable ends in USB-A, an adapter bridges the gap; check the adapter guide for the port shapes. A USB hub also works when ports run short, and the hub guide explains which hub types carry data as well as power. The USB-C cable specs guide covers speeds, power and length for USB-C cables.
FAQ
Can a wireless printer be wired with any USB cable?
No. The printer side needs USB-B, so the cable must end in USB-B at the printer, with USB-A or USB-C at the computer. A cable with the wrong plug shape will not fit, and a charge-only cable will not carry data.
Does a wired printer still need Wi-Fi?
No. The USB cable carries the print job, so the printer prints with Wi-Fi off. Wi-Fi stays useful for printing from phones and laptops that never plug in, and the Wi-Fi guide explains the wireless options.
How long can a USB printer cable be?
The cables in this guide run from 6 ft to 25 ft. Measure the run from the computer to the printer, pick a length with slack to spare, and see the cable size guide for the full range of lengths.
Does a wired printer need a driver installed?
Not for the cable itself: the FXAVA, UorMe, BRENDAZ and NC XQIN cables state plug and play with no driver required. The computer may still add the printer software on its own when it sees the printer over USB.
What warranty comes with a USB printer cable?
It varies by cable. The FXAVA cable carries a 3-year warranty with lifetime technical support, the sweguard cable (on Amazon) carries an 18-month warranty, and the Amazon Basics 16 ft cable carries a 1-year warranty.
More for your workspace
See the wireless printer WiFi guide, the USB printer cable types, the wireless printer setup options, the USB cable sizes and the Audio, Power and Connectivity guides.





