Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›

Home office gear, compared spec by spec.

Amazon Black Friday Week deals
Audio, Power and Connectivity

How to Make Your Printer Wireless: 4 Setup Options

Make a USB printer wireless with a print server or built-in Wi-Fi. This guide covers wireless and wired print servers, sharing from a computer, and setup checks.

How to Make Your Printer Wireless: 4 Setup Options

How to make your printer wireless comes down to adding a network link between the printer and the router: built-in Wi-Fi on newer printers, a wireless print server on a USB printer, or a shared printer on a computer that stays on. A printer that only has a USB cable can still print from any computer on the network once the right link is in place. The options below work through each route, with figures from the listings cited.

OfficeKitHQ earns a commission when you buy through links on this page, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Affiliate disclosure.

The quick answer: how to make your printer wireless

Use the printer’s built-in Wi-Fi when it has one. When the printer only has USB, plug it into a wireless print server: the Xiiaozet LK100W (on Amazon) turns a USB printer into a network printer over 2.4GHz Wi-Fi or Ethernet, and the CHEECENT CR202 (on Amazon) shares 2 USB printers over Wi-Fi or Ethernet. A third route is sharing the printer from a computer that stays on, which needs no extra hardware but needs that computer awake. Pick the route that fits the printer you already own.

Option 1: Use the printer’s built-in Wi-Fi

Check the printer for a Wi-Fi setting first. Many newer printers join the network on their own, and the printer then shows up on every computer on the same network. The Epson TM-T88VI (on Amazon) lists NFC, Ethernet and USB, which shows the mix of links a networked printer can carry. Open the printer’s network menu, pick the network name, and enter the password. Print a network settings page from the printer to check the address it received. When the printer has no Wi-Fi menu at all, move to the print server options below.

Option 2: Add a wireless print server

A wireless print server plugs into the printer’s USB port and joins the network over Wi-Fi or Ethernet, so the printer takes jobs from any computer on the network. The Xiiaozet LK100W supports 95% of USB printers and works with RAW and IPP protocols, with 2.4GHz Wi-Fi under 802.11b/g/n and 2 Ethernet ports at 10/100Mbps. Its setup runs as a 2-step setup with the Windows Quick Installation Tool, and manual setup runs through a web page with standard TCP/IP port settings. The CHEECENT CR202 has 2 USB ports and shares 2 printers over Wi-Fi or Ethernet, with browser-based management and no extra software. The Xiiaozet LK300EW (on Amazon) has 3 USB ports and shares printers, scanners and storage over 2.4GHz Wi-Fi or Ethernet, with added printers reached by IP address or hostname. The EVGATSAUTO server (on Amazon) shares 4 printers, with a 480Mbps USB 2.0 port and a 100Mbps LAN bridge, in wired Ethernet, 2.4G wireless or standalone mode.

Option 3: Add a wired print server

When the printer sits next to the router, a wired print server does the same job over Ethernet. The StarTech PM1115U2 connects a single USB 2.0 printer to a wired Ethernet LAN, with 10Base-T and 100Base-TX auto-sensing, and setup runs through a web interface with a static IP or DHCP, using LPR queue LP1. The IOGEAR GPSU21 connects a USB 2.0 printer to the network with the included Cat 5 cable, supports DHCP and web management, and works with macOS and Windows. The X-MEDIA XM-PS110U is a 1-port 10/100Mbps print server that lists support for more than 320 printer models. Wired servers suit a printer that never moves, since the cable run fixes the printer in place.

Option 4: Share the printer from a computer

When the printer plugs into a computer by USB, that computer can share it with the network. Turn on printer sharing in the computer’s settings, then add the shared printer on each computer that needs it. This route needs no extra hardware, and the CHEECENT listing notes it saves you from keeping a dedicated computer powered on to support the printer when you use a server instead. The catch is that the host computer must stay on and awake: when it sleeps or shuts down, the printer goes offline for everyone. Use sharing as a short-term fix, and use a print server when the printer must stay up on its own.

What to check before you buy

Check the printer against the server’s compatibility list before you buy. The LK100W is not compatible with dye-sublimation printers, the Roland BN series or the Canon LBP CAPT series, and mobile printing and AirPrint are not supported on it. The LK300EW also notes that mobile printing and AirPrint are not supported. The CR202 does not support phones, scanners, Chromebooks or Android devices, and it does no scanning. The StarTech server is not compatible with USB hubs, multi-function printers with proprietary drivers, or printers that need full bi-directional communication, and the CR202 notes to turn off Bidirectional Mode. Install the printer driver on each networked computer, as the CHEECENT listing directs. Check the port count too: the CR202 shares 2 printers, the LK300EW has 3 ports, and the EVGATSAUTO server shares 4 printers, so pick a server with a port for each printer you plan to share.

Step 1: Plug the server into the printer

Connect the print server to the printer with a USB cable, then power both on. The CR202 has 2 USB ports, so plug each printer into its own port. The LK100W has 1 USB port, so it serves 1 printer. Keep the server close to the printer while you set it up, and move it to its final spot once the network link works.

Step 2: Join the server to the network

Join the server to the network over Wi-Fi or Ethernet. The LK100W offers 2.4GHz Wi-Fi and 2 Ethernet ports at 10/100Mbps, and the LK300EW offers 2.4GHz Wi-Fi or an Ethernet port. Use Ethernet when the server sits next to the router, and Wi-Fi when the printer must sit elsewhere. Give the server a fixed address when the setup page offers one, so the printer address never moves.

Step 3: Add the printer on each computer

Add the printer on each computer that needs it. The LK100W setup runs as a 2-step setup with the Windows Quick Installation Tool, while Mac and Linux setups run through manual configuration with standard TCP/IP port settings. The StarTech server uses LPR queue LP1, and the LK300EW adds printers by IP address or hostname. Install the printer driver on each computer, as the CHEECENT listing directs.

Step 4: Print a check page

Print a check page from a computer on the network. When the page prints, the link works. When nothing prints, check that the server shows on the network, that the printer is on, and that the driver matches the printer model. The X-MEDIA listing covers more than 320 printer models, so check the model list when the printer does not show up.

Step 5: Move the printer to its final spot

Move the printer and the server to the final spot, then print again. Wi-Fi servers such as the LK100W and the LK300EW can sit anywhere in local network coverage, while wired servers such as the StarTech PM1115U2 must stay next to the router with the included RJ45 network cable. Print another check page after the move to confirm the link still works.

FAQ

Can you make a non-wireless printer wireless?

Yes, with a print server. A wireless print server such as the Xiiaozet LK100W plugs into the printer’s USB port and joins the network over 2.4GHz Wi-Fi or Ethernet, so any computer on the network can print to it. A wired print server such as the StarTech PM1115U2 does the same over Ethernet.

Do print servers work with Mac and Linux?

Most do. The CHEECENT CR202 works with Windows, Mac and Linux, the StarTech PM1115U2 works with macOS and Windows, and the LK300EW works with Windows, Linux and macOS. The LK100W offers manual configuration for Mac and Linux through a web page, and the StarTech listing notes its included software is compatible with Windows only.

Can I print from a phone through a print server?

Not with the servers in these listings. The LK100W and the LK300EW both note that mobile printing and AirPrint are not supported, and the CR202 does not support phones. Use the printer’s own app or built-in Wi-Fi for phone printing, and use a print server for computers.

Why does my printer not show up on the network?

Check the driver first: install the printer driver on each computer, as the CHEECENT listing directs. Then check the model against the server’s compatibility list: the LK100W does not support dye-sublimation printers, the Roland BN series or the Canon LBP CAPT series. Turn off Bidirectional Mode when the CR202 manual calls for it, and check that the server has an address on the network.

More for your workspace

See every Audio, Power and Connectivity guide and all Docking Stations and USB Hubs guides.